Communication channel is shared by all the machines on the network
in ________
a) broadcast network
b) unicast network
c) multicast network
d) anycast network

1 Answer

Answer :

a) broadcast network

Related questions

Description : IPv6 does not support which of the following addressing modes? a. unicast addressing b. multicast addressing c. broadcast addressing d. anycast addressing

Last Answer : c. broadcast addressing

Description : A one-to-all communication between one source and all hosts on a network is classified as a_______ communication. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : broadcast

Description : A one-to-many communication between one sourceand a specific group of hosts is classifiedas a _______ communication. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : multicast

Description : IGMP helps a ________ router createand update a list of loyal members relatedto each router interface. A) broadcast B) unicast C) multicast D) noneof the above

Last Answer : multicast

Description : In Ethernet addressing, ifall the bits are 1s, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : broadcast

Description : In Ethernet addressing, if the least significant bit of the firstbyte is 1, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : multicast

Description : In Ethernet addressing, if the least significant bit of the firstbyte is 0, the address is _________. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : unicast

Description : If an Ethernet destination address is08:07:06:05:44:33, then this is a ______ address. A) unicast B) multicast C) broadcast D) any of theabove

Last Answer : unicast

Description : f an Ethernet destination address is07:01:02:03:04:05, then this is a ______ address. A) unicast B) multicast C) broadcast D) any of theabove

Last Answer : multicast

Description : An ARP request is normally _______. A) broadcast B) multicast C) unicast D) noneof the above

Last Answer : broadcast

Description : An ARP reply isnormally_______. A) broadcast B) multicast C) unicast D) noneof the above

Last Answer : unicast

Description : RPB creates a shortest path _______ tree from thesourceto each destination. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : broadcast

Description : A one-to-one communication betweenone source and one destination is classified as a _______ communication. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : unicast

Description : In IPv6, _______ address defines a single computer A. a unicast B. a multicast C. an anycast D. none of the above

Last Answer : A. a unicast

Description : In IPv6,_________addressdefinesagroup of computers. A) aunicast B) a multicast C) an anycast D) none of the above

Last Answer : a multicast

Description : In IPv6,____ address defines a groupof computers with addresses that have thesame prefix. A) aunicast B) a multicast C) an anycast D) none of the above

Last Answer : an anycast

Description : In IPv6,_______ address defines asingle computer. A) aunicast B) a multicast C) an anycast D) none of the above

Last Answer : aunicast

Description : State whether true or false. i) A connection oriented protocol can only use unicast addresses. ii) The anycast service is included in IPV6. A) True, True B) True, False

Last Answer : i) A connection oriented protocol can only use unicast addresses.

Description : Multicast link state routing uses the _______ tree approach. A) source-based B) group-shared C) a or b D) none of the above

Last Answer : source-based

Description : Which of the following is NOT true about User Datagram Protocol in transport layer? a. Works well in unidirectional communication, suitable for broadcast information. b. It does three way ... File System d. The lack of retransmission delays makes it suitable for real-time applications

Last Answer : b. It does three way handshake before sending datagrams

Description : Differentiate between Multicast and Unicast. -Technology

Last Answer : Multicast – Radio, TV and Satellite communication is referred to as Multicast, meaning one-way communication from single sending source to unlimited number of receivers.The internet transmission is 'Unicast‟, referring to two-way communication and being interactive.

Description : Which of the following devices discriminates between multicast and unicast packets? 1) Multicast switch 2) Bicast switch 3) Bicast router 4) Mulicast Router

Last Answer : 4) Mulicast Router

Description : Which of the following devices discriminates between multicast and unicast packets? 1 Multicast switch 2 Bicast switch 3 Bicast router 4 Mulicast Router

Last Answer : 4 Mulicast Router

Description : A pure ALOHA Network transmits 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is ______. a. 0.384 b. 0.184 c. 0.286 d. 0.58

Last Answer : b. 0.184

Description : The least significant 23 bits in a 48-bit Ethernet address identify a ________. A) multicast router B) host C) multicast group D) noneof the above

Last Answer : multicast group

Description : In multicast routing, eachinvolvedrouter needs toconstructa ________ path tree for each group. A) average B) longest C) shortest D) none of the above

Last Answer : shortest

Description : There are two types of designs for communication subnets: they are ………… A. Point-to-Point channels and Broadcast channels B. packet-switched subnet and store-and-forward C. Multicasting and Broadcasting D. Point-to-Point channels and store-and-forward

Last Answer : A. Point-to-Point channels and Broadcast channels

Description : In _______ transmission, the channel capacity is shared byboth communicatingdevices at all times. A) simplex B) half-duplex C) full-duplex D) half-simplex

Last Answer : full-duplex

Description : A single channel is shared by multiple signals by _____ a. analog modulation b. digital modulation c. multiplexing d. phase modulation

Last Answer : c. multiplexing

Description : CBT isa ________ protocol that usesa core as the root of the tree. A) source-based B) group-shared C) a or b D) none of the above

Last Answer : group-shared

Last Answer : AM=Amplitude modulation and  FM = Frequency modulation.

Description : Which of the following couldnot be an Ethernet unicast destination? A) 43:7B:6C:DE:10:00 B) 44:AA:C1:23:45:32 C) 46:56:21:1A:DE:F4 D) 48:32:21:21:4D:34

Last Answer : 43:7B:6C:DE:10:0

Description : . In IPv6, the___________ address isgenerally usedby a normal host as a unicast address. A) provider-based unicast B) link local C) site local D) none of the above

Last Answer : provider-based unicast

Description : In unicast routing,each router in the domain has a table thatdefines a______ path tree to possible destinations. A) average B) longest C) shortest D) none of the above

Last Answer : shortest

Description : Which of the following couldnot be an Ethernet multicast destination? A) B7:7B:6C:DE:10:00 B) 7B:AA:C1:23:45:32 C) 7C:56:21:1A:DE:F4 D) 83:32:21:21:4D:34

Last Answer : 7C:56:21:1A:DE:F4

Description : A multicast message is sent from _______ to _______. A) onesource; one destination B) onesource; multiple destinations C) multiple sources; onedestination D) noneof the above

Last Answer : onesource; multiple destinations

Description : Which of the following is true about ICMP messages? A) An ICMP error message may be generated for an ICMP error message. B) An ICMP error message may be generated only for the first fragment. C) An ICMP error message may be generated for a multicast datagram. D) noneis true

Last Answer : An ICMP error message may be generated only for the first fragmen

Description : Which of the following is true about ICMP messages? A) An ICMP error message may be generated for an ICMP error message. B) An ICMP error message may be generated for each fragment. C) An ICMP error message may be generated for a multicast datagram. D) noneis true

Last Answer : noneis true

Description : PIM-DM is used in a _______ multicast environment, suchas a LAN. A) dense B) sparse C) a or b D) none of the above

Last Answer : dense

Description : A _______ message tells an upstream router to start sending multicast messages for a specific groupthrough aspecific router. A) weed B) graft C) prune D) none of the above

Last Answer : graft

Description : A _______ message tells an upstream router to stop sending multicast messages for a specific group through aspecific router. A) weed B) graft C) prune D) none of the above

Last Answer : prune

Description : _______ is an implementation of multicast distance vector routing. It is asource-based routing protocol, based on RIP. A) MOSPF B) DVMRP C) CBT D) none of the above

Last Answer : DVMRP

Description : ______ adds pruning and grafting to_______ to create a multicast shortestpath tree that supports dynamic membershipchanges. A) RPM; RPB B) RPB; RPM C) RPF: RPM D) none of the above

Last Answer : RPM; RPB

Description : RPF guarantees that eachnetwork receives only ____ of the multicast packet. A) one copy B) two copies C) a or b D) none of the above

Last Answer : none of the above

Description : The Multicast Open Shortest Path First (MOSPF)protocol is an extension of the OSPF protocol that uses multicast routing to create source-based trees. The protocol is basedon _______ routing. A) distancevector B) link state C) path vector D) none of the above

Last Answer : link state

Description : Which of the following IP address class is Multicast? a. Class A b. Class B c. Class C d. Class D

Last Answer : d. Class D

Description : The channel in the data communication model can be a. postal mail services b. telephone lines c. radio lines d. any of the above

Last Answer : any of the above

Description : Which of hte following is considered a broad band communication channel? a. coaxial cable b. fiber optics cable c. microwave circuits d. all of above

Last Answer : all of above

Description : A pure ALOHA Network transmit 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is .............. (A) 0.384 (B) 0.184 (C) 0.286 (D) 0.586

Last Answer : (B) 0.184