Typical growth curve in plants is (a) stair-steps shaped (b) parabolic (c) sigmoid (d) linear.

Typical growth curve in plants is
(a) stair-steps shaped
(b) parabolic
(c) sigmoid
(d) linear.
by

1 Answer

Answer :

(c) sigmoid
by

Related questions

The population of an insect species shows an explosive increase in numbers during rainy season followed by its disappearance at the end of the season. What does this show? (a) The food plants mature and die at the end of the rainy season. (b) Its population growth curve is of J-type. (c) The population of its predators increases enormously. (d) S-shaped or sigmoid growth of this insect.

Description : The population of an insect species shows an explosive increase in numbers during rainy season followed by its disappearance at the end of the season. What does this show? (a) The food plants ... The population of its predators increases enormously. (d) S-shaped or sigmoid growth of this insect.

Last Answer : (b) Its population growth curve is of J-type.

The population growth curve is (A) S-shaped curve (B) Parabolic curve (C) Circular curve (D) Straight line

Description : The population growth curve is  (A) S-shaped curve  (B) Parabolic curve  (C) Circular curve  (D) Straight line 

Last Answer : (A) S-shaped curve

What does the stationary phase of sigmoid growth curve indicate? -Biology

Description : What does the stationary phase of sigmoid growth curve indicate? -Biology

Last Answer : answer:

In the sigmoid curve (or) growth curve of bacteria how many stages are there a. 3 b. 4 c. 2 d. 5

Description : In the sigmoid curve (or) growth curve of bacteria how many stages are there a. 3 b. 4 c. 2 d. 5

Last Answer : Ans: B

The no. of generations per hour in a bacteria is a. Growth rate b. Generation time c. Sigmoid curve d. None of these

Description : The no. of generations per hour in a bacteria is a. Growth rate b. Generation time c. Sigmoid curve d. None of these

Last Answer : Ans: B

The most active stage in the sigmoid curve of bacteria in which maximum growth is attained a. Lag phase b. Stationary phase c. Decline phase d. Log phase

Description : The most active stage in the sigmoid curve of bacteria in which maximum growth is attained a. Lag phase b. Stationary phase c. Decline phase d. Log phase

Last Answer : Ans: D

What is sigmoid curve? -Biology

Description : What is sigmoid curve? -Biology

Last Answer : answer:

Pick up the incorrect statement from the following: (A) In dog-legged stairs, no space between its flights is provided (B) In open newel stair, a rectangular well is provided (C) In geometric stair, a curved shaped well between forward and backward flights, is provided (D) In geometrical stair, two quarter space landing is provided

Description : Pick up the incorrect statement from the following: (A) In dog-legged stairs, no space between its flights is provided (B) In open newel stair, a rectangular well is provided (C) In ... forward and backward flights, is provided (D) In geometrical stair, two quarter space landing is provided

Last Answer : Answer: Option D

Which of the following statements is not true for J-shaped growth curve?

Description : Which of the following statements is not true for J-shaped growth curve?

Last Answer : Which of the following statements is not true for J-shaped growth curve? A. Exponential ... crash occurs. D. Population seldom reaches equilibrium.

What would An s shaped population growth curve best describes what?

Description : What would An s shaped population growth curve best describes what?

Last Answer : What is the answer ?

I need to have a stair lift installed for my elderly mother. I need professional advise and assistance. I am not sure if stair lift will leave enough space on steps for others to go up and down.?

Description : I need to have a stair lift installed for my elderly mother. I need professional advise and assistance. I am not sure if stair lift will leave enough space on steps for others to go up and down.?

Last Answer : I have had a stair lift installed also for my elderly mother. As long as you have a standard stair case, nothing narrow as in some new townhomes, the track gets installed close to the wall ... the lower level of her home. This is an expensive undertaking so think before you purchase and install.

The term string is used for (A) The underside of a stair (B) Outer projecting edge of a tread (C) A sloping member which supports the steps in a stair (D) A vertical member between two treads

Description : The term string is used for (A) The underside of a stair (B) Outer projecting edge of a tread (C) A sloping member which supports the steps in a stair (D) A vertical member between two treads

Last Answer : Answer: Option C

Mr. Sharma decided to walk down the escalator of a tube station. He found that if he walks down 26 steps, he requires 30 seconds to reach the bottom. However, if he steps down 34 stairs he would only require 18 seconds to get to the bottom. If the time is measured from the moment the top step begins to descend to the time he steps off the last step at the bottom, find out the height of the stair way in steps?

Description : Mr. Sharma decided to walk down the escalator of a tube station. He found that if he walks down 26 steps, he requires 30 seconds to reach the bottom. However, if he steps down 34 stairs he would only ... time he steps off the last step at the bottom, find out the height of the stair way in steps?

Last Answer : Answer: 46 steps.

In olden days the type of section adopted in trunk and out fall sewers was A. Parabolic shaped B. Horse shoe shaped C. Egg shaped D. Circular shaped

Description : In olden days the type of section adopted in trunk and out fall sewers was A. Parabolic shaped B. Horse shoe shaped C. Egg shaped D. Circular shaped

Last Answer : ANS: B

For trunk and out-fall, the type of sewers generally used, is A. Standard egg shaped B. Circular shaped C. Horse shoe shaped D. Parabolic shaped

Description : For trunk and out-fall, the type of sewers generally used, is A. Standard egg shaped B. Circular shaped C. Horse shoe shaped D. Parabolic shaped

Last Answer : ANS: C

The partial pressure distribution of an ideal gas diffusing through another stagnant ideal gas at steady state follows a/an __________ law. (A) Exponential (B) Parabolic (C) Linear (D) Cubic

Description : The partial pressure distribution of an ideal gas diffusing through another stagnant ideal gas at steady state follows a/an __________ law. (A) Exponential (B) Parabolic (C) Linear (D) Cubic

Last Answer : (A) Exponential

If the thermal conductivity of a wall material is independent of temperature, the steady state temperature distribution in the very large thin plane wall having steady, uniform surface temperature follows __________ law. (A) Hyperbolic (B) Parabolic (C) Linear (D) Logarithmic

Description : If the thermal conductivity of a wall material is independent of temperature, the steady state temperature distribution in the very large thin plane wall having steady, uniform surface temperature follows __________ ... (A) Hyperbolic (B) Parabolic (C) Linear (D) Logarithmic

Last Answer : (C) Linear

Temperature profile in steady state heat transfer is (A) Asymptotic (B) Hyperbolic (C) Parabolic (D) Linear

Description : Temperature profile in steady state heat transfer is (A) Asymptotic (B) Hyperbolic (C) Parabolic (D) Linear

Last Answer : (D) Linear

In case of heat flow by conduction for a cylindrical body with an internal heat source, the nature of temperature distribution is (A) Linear (B) Hyperbolic (C) Parabolic (D) None of these

Description : In case of heat flow by conduction for a cylindrical body with an internal heat source, the nature of temperature distribution is (A) Linear (B) Hyperbolic (C) Parabolic (D) None of these

Last Answer : (C) Parabolic

If the thermal conductivity of a wall material is independent of temperature, the steady state temperature distribution in the very large thin plane wall having steady, uniform surface temperature follows __________ law. (A) Parabolic (B) Hyperbolic (C) Linear (D) Logarithmic

Description : If the thermal conductivity of a wall material is independent of temperature, the steady state temperature distribution in the very large thin plane wall having steady, uniform surface temperature follows __________ law. (A) Parabolic (B) Hyperbolic (C) Linear (D) Logarithmic

Last Answer : (A) Parabolic

The velocity distribution in direction normal to the direction of flow in plane Poiseuille flow is (A) Hyperbolic (B) Parabolic (C) Linear (D) None of these

Description : The velocity distribution in direction normal to the direction of flow in plane Poiseuille flow is (A) Hyperbolic (B) Parabolic (C) Linear (D) None of these

Last Answer : (B) Parabolic

For turbulent flow in smooth circular pipe, the velocity distribution is a function of the distance 'd' measured from the wall of the pipe and the friction velocity 'v', and it follows a __________ relationship. (A) Logarithmic (B) Linear (C) Hyperbolic (D) Parabolic

Description : For turbulent flow in smooth circular pipe, the velocity distribution is a function of the distance 'd' measured from the wall of the pipe and the friction velocity 'v', and it follows a __________ relationship. (A) Logarithmic (B) Linear (C) Hyperbolic (D) Parabolic

Last Answer : (A) Logarithmic

The velocity profile for turbulent flow through a closed conduit is (A) Logarithmic (B) Parabolic (C) Hyperbolic (D) Linear

Description : The velocity profile for turbulent flow through a closed conduit is (A) Logarithmic (B) Parabolic (C) Hyperbolic (D) Linear

Last Answer : (A) Logarithmic

Which law is followed by the velocity distribution in the turbulent boundary layer? (A) Parabolic law (B) Linear law (C) Logarithmic law (D) None of these

Description : Which law is followed by the velocity distribution in the turbulent boundary layer? (A) Parabolic law (B) Linear law (C) Logarithmic law (D) None of these

Last Answer : (C) Logarithmic law

The distribution of shear stress in a stream of fluid in a circular tube is(A) Linear with radius for turbulent flow only(B) Linear with radius for laminar flow only(C) Linear with radius for both laminar & turbulent flow(D) Parabolic with radius for both laminar & turbulent flow

Description : The distribution of shear stress in a stream of fluid in a circular tube is (A) Linear with radius for turbulent flow only (B) Linear with radius for laminar flow only (C) Linear with radius for both laminar & turbulent flow (D) Parabolic with radius for both laminar & turbulent flow

Last Answer : (C) Linear with radius for both laminar & turbulent flow

For laminar flow of Newtonian fluid in a circular pipe, the velocitydistribution is a function of the distance 'd' measured from the centre line ofthe pipe, and it follows a __________ relationship.(A) Logarithmic(B) Parabolic(C) Hyperbolic(D) Linear

Description : For laminar flow of Newtonian fluid in a circular pipe, the velocitydistribution is a function of the distance 'd' measured from the centre line of the pipe, and it follows a __________ relationship. (A) Logarithmic (B) Parabolic (C) Hyperbolic (D) Linear

Last Answer : (B) Parabolic

The shape of the bending moment diagram over the length of a beam, having no external load, is always (A) Linear (B) Parabolic (C) Cubical (D) Circular

Description : The shape of the bending moment diagram over the length of a beam, having no external load, is always (A) Linear (B) Parabolic (C) Cubical (D) Circular

Last Answer : (A) Linear

The shape of the bending moment diagram over the length of a beam, carrying a uniformly distributed load is always (A) Linear (B) Parabolic (C) Cubical (D) Circular

Description : The shape of the bending moment diagram over the length of a beam, carrying a uniformly  distributed load is always  (A) Linear  (B) Parabolic  (C) Cubical  (D) Circular

Last Answer : (B) Parabolic 

The shape of the bending moment diagram over the length of a beam, carrying a uniformly increasing load, is always (A) Linear (B) Parabolic (C) Cubical (D) Circular

Description : The shape of the bending moment diagram over the length of a beam, carrying a uniformly  increasing load, is always  (A) Linear  (B) Parabolic  (C) Cubical  (D) Circular 

Last Answer : (C) Cubical 

The stress-strain relation of the Newtonian fluid is (A) Linear (B) Parabolic (C) Hyperbolic (D) Inverse type

Description : The stress-strain relation of the Newtonian fluid is (A) Linear (B) Parabolic (C) Hyperbolic (D) Inverse type

Last Answer : Answer: Option A

Variation of shear stress in a shaft is (a) Parabolic (b) Linear (c) Cubical (d) None

Description : Variation of shear stress in a shaft is (a) Parabolic (b) Linear (c) Cubical (d) None

Last Answer : b) Linear

The variation of shear stress in a circular shaft subjected to torsion is a. Linear b. Parabolic c. Hyperbolic. d. Uniform

Description : The variation of shear stress in a circular shaft subjected to torsion is a. Linear b. Parabolic c. Hyperbolic. d. Uniform

Last Answer : a. Linear

Variation of bending strain in a beam has (a) Parabolic variation (b) Linear variation (c) Cubical variation (d) None

Description : Variation of bending strain in a beam has (a) Parabolic variation (b) Linear variation (c) Cubical variation (d) None

Last Answer : (b) Linear variation

Variation of bending stresses in a beam have (a) Parabolic variation (b) Linear variation (c) Cubical variation (d) None

Description : Variation of bending stresses in a beam have (a) Parabolic variation (b) Linear variation (c) Cubical variation (d) None

Last Answer : (b) Linear variation

Shear stress variation is (a) Linear (b) Polynomial (c) Parabolic (d) None

Description : Shear stress variation is (a) Linear (b) Polynomial (c) Parabolic (d) None

Last Answer : (c) Parabolic

n case of a cantilever beam having concentrated loads, shear force variation will be (a) Linear (b) Parabolic (c) Cubic (d) None

Description : n case of a cantilever beam having concentrated loads, shear force variation will be (a) Linear (b) Parabolic (c) Cubic (d) None

Last Answer : (d) None

In case of a cantilever beam having concentrated loads, shear force variation will be (a) Linear (b) Parabolic (c) Cubic (d) None

Description : In case of a cantilever beam having concentrated loads, shear force variation will be (a) Linear (b) Parabolic (c) Cubic (d) None

Last Answer : d) None

In case of a cantilever beam having UDL, bending moment variation will be (a) Linear (b) Parabolic (c) Cubic (d) None

Description : In case of a cantilever beam having UDL, bending moment variation will be (a) Linear (b) Parabolic (c) Cubic (d) None

Last Answer : (b) Parabolic

In case of a cantilever beam having concentrated loads, bending moment variation will be (a) Linear (b) Parabolic (c) Cubic (d) None

Description : In case of a cantilever beam having concentrated loads, bending moment variation will be (a) Linear (b) Parabolic (c) Cubic (d) None

Last Answer : (a) Linear

Variation of bending moment due to concentrated loads will be (a) Linear (b) Parabolic (c) Cubic (d) None

Description : Variation of bending moment due to concentrated loads will be (a) Linear (b) Parabolic (c) Cubic (d) None

Last Answer : (a) Linear

70. Shear strain is a (a) Linear strain (b) Parabolic strain (c) Angular strain (d) None

Description : 70. Shear strain is a (a) Linear strain (b) Parabolic strain (c) Angular strain (d) None

Last Answer : (c) Angular strain

Shear strain is a (a) Linear strain (b) Parabolic strain (c) Logarithmic strain (d) None

Description : Shear strain is a (a) Linear strain (b) Parabolic strain (c) Logarithmic strain (d) None

Last Answer : (d) None

How is the line interpolation method better than circula interpolation method, parabolic interpolation method and spline curve interpolation method?

Description : How is the line interpolation method better than circula interpolation method, parabolic interpolation method and spline curve interpolation method?

Last Answer : Interpolation https://en.wikipedia.org/wiki/Interpolation

The curve of a catenary by nature is a.hyperbolic b.ellipse c.107 dynes d.circular e.parabolic

Description : The curve of a catenary by nature is a.hyperbolic b.ellipse c.107 dynes d.circular e.parabolic

Last Answer : e. parabolic

Graph of potential energy against distance is A. curve B. parabolic C. hyperbolic D. straight line

Description : Graph of potential energy against distance is A. curve B. parabolic C. hyperbolic D. straight line

Last Answer : straight line

An ideal vertical curve to join two gradients, is (A) Circular (B) Parabolic (C) Elliptical (D) Hyperbolic

Description : An ideal vertical curve to join two gradients, is (A) Circular (B) Parabolic (C) Elliptical (D) Hyperbolic

Last Answer : (B) Parabolic

Distribution of shear intensity over a rectangular section of a beam, follows: (A) A circular curve (B) A straight line (C) A parabolic curve (D) An elliptical curve

Description : Distribution of shear intensity over a rectangular section of a beam, follows: (A) A circular curve (B) A straight line (C) A parabolic curve (D) An elliptical curve

Last Answer : Answer: Option C

The shear stress-strain graph for a Newtonian fluid is a (A) Straight line (B) Parabolic curve (C) Hyperbolic curve (D) Elliptical

Description : The shear stress-strain graph for a Newtonian fluid is a (A) Straight line (B) Parabolic curve (C) Hyperbolic curve (D) Elliptical

Last Answer : Answer: Option A

If N is deviation angle the length L of a parabolic vertical curve for overtaking sight distance S, is (A) NS²/9.6 if L > S (B) NS²/9.6 if L < S (C) 2S - 9.6/N if L < S (D) Both (A) and (C)

Description : If N is deviation angle the length L of a parabolic vertical curve for overtaking sight distance S, is (A) NS²/9.6 if L > S (B) NS²/9.6 if L < S (C) 2S - 9.6/N if L < S (D) Both (A) and (C)

Last Answer : Answer: Option D

The shape of a vertical curve, is (A) Parabolic (B) Elliptical (C) Circular (D) Spiral

Description : The shape of a vertical curve, is (A) Parabolic (B) Elliptical (C) Circular (D) Spiral

Last Answer : Answer: Option A