The pressure inside a piston cylinder is a variable of
a) Radius
b) Plane angle
c) Z plane distance
d) Constant, not a variable

1 Answer

Answer :

c) Z plane distance

Related questions

Description : For a reciprocating pump, the indicator diagram is the graph between the (A) Discharge and overall efficiency (B) Volume swept by piston for one complete revolution and the pressure in the cylinder (C) Angle swept by the crank pin at any instant and the discharge (D) None of these

Last Answer : (B) Volume swept by piston for one complete revolution and the pressure in the cylinder

Description : Gas is enclosed in a cylinder with a weighted piston as the stop boundary. The gas is heated and expands from a volume of 0.04 m^3 to 0.10 m^3 at a constant pressure of 200kPa.Calculate the work done by the system.  A. 8 kJ  B. 10 kJ  C.12 kJ  D.14 kJ Formula: W = p(V2-V1)

Last Answer : 12 kJ

Description : A gas is enclosed in a cylinder with a weighted piston as the top boundary. The gas is heated and expands from a volume of 0.04 m3 to 0.10 m3 at a constant pressure of 200 kPa. Find the work done on the system.  a. 5 kJ  b. 15 kJ  c. 10 kJ  d. 12 kJ

Last Answer : 12 kJ

Description : At one atmosphere, a cylinder with movable piston contains 2,000 milliliters of gas. If the pressure is increased to 5 atmospheres and the temperature remains unchanged, what is the new volume of the gas? w) 10,000 milliliters x) 400 milliliters y) 1,000 milliliters z) 4,000 milliliters

Last Answer : ANSWER: X -- 400 MILLILITERS

Description : Liquid "X" is at equilibrium with its vapor in a cylinder and piston apparatus. When the volume of the space above the liquid is 50 ml and the temperature 25!, the vapor pressure of "X" is 120 torr. What will the ... 25!C? Some liquid is always present. w) 30 torr x) 60 torr y) 120 torr z) 240 torr

Last Answer : ANSWER: Y -- 120 TORR

Description : The potential of a coaxial cylinder with charge density 1 unit , inner radius 1m and outer cylinder 2m is (in 10 9 ) a) 12.74 b) 13.47 c) 12.47 d) 13.74

Last Answer : c) 12.47

Description : Find the flux density of line charge of radius (cylinder is the Gaussian surface) 2m and charge density is 3.14 units? a) 1 b) 0.75 c) 0.5 d) 0.25

Last Answer : d) 0.25

Description : The work done by a weightless piston in causing an expansing `Delta V` (at constant temperature), when the opposing pressure P is variable, is given b

Last Answer : The work done by a weightless piston in causing an expansing `Delta V` (at constant temperature), when the opposing ... 0 C. `W = -P Delta V` D. None

Description : The inductance of a coaxial cable with inner radius a and outer radius b, from a distance d, is given by a) L = μd ln(b/a)/2π b) L = 2π μd ln(b/a) c) L = πd/ln(b/a) d) L = 0

Last Answer : a) L = μd ln(b/a)/2π

Description : Find the potential due to a charged ring of density 2 units with radius 2m and the point at which potential is measured is at a distance of 1m from the ring. a) 18π b) 24π c) 36π d) 72π

Last Answer : d) 72π

Description : Vector transformation followed by coordinate point substitution and vice-versa, both given the same result. Choose the best answer. a) Possible, when the vector is constant b) Possible, when the vector is variable c) Possible in all cases d) Not possible

Last Answer : a) Possible, when the vector is constant

Description : In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a ... occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Last Answer : (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder

Description : One mole of nitrogen at 8 bar and 600 K is contained in a piston cylinder arrangement. It is brought to 1 bar isothermally against a resisting pressure of 1 bar. The work done (in Joules) by the gas is (A) 30554 (B) 10373 (C) 4988.4 (D) 4364.9

Last Answer : (B) 10373

Description : The piston rod of a hydraulic cylinder exerts an operating force of 10kN. The allowable stress in the cylinder is 45N/mm². Calculate the thickness of the cylinder using Lame's equation. Diameter of the cylinder is 40mm and ... is 10MPa. a) 2.05mm b) 4.2mm c) 5.07mm d) None of the listed

Last Answer : c) 5.07mm

Description : For a function given by F = 4x i + 7y j +z k, the divergence theorem evaluates to which of the values given, if the surface considered is a cone of radius 1/2π m and height 4π 2 m. a) 1 b) 2 c) 3 d) 4

Last Answer : b) 2

Description : Find the current density on the conductor surface when a magnetic field H = 3cos x i + zcos x j A/m, for z>0 and zero, otherwise is applied to a perfectly conducting surface in xy plane. a) cos x i b) –cos x i c) cos x j d) –cos x j

Last Answer : b) –cos x i

Description : If D = 2xy i + 3yz j + 4xz k, how much flux passes through x = 3 plane for which - 1

Last Answer : c) 36

Description : Find the angle at which the potential due a dipole is measured, when the distance from one charge is 12cm and that due to other is 11cm, separated to each other by a distance of 2cm. a) 15 b) 30 c) 45 d) 60

Last Answer : d) 60

Description : he work done of vectors force F and distance d, separated by angle θ can be calculated using, a) Cross product b) Dot product c) Addition of two vectors d) Cannot be calculated

Last Answer : b) Dot product

Description : The divergence theorem value for the function x 2 + y 2 + z 2 at a distance of one unit from the origin is a) 0 b) 1 c) 2 d) 3

Last Answer : d) 3

Description : The skin depth of a wave with phase constant of 12 units inside a conductor is a) 12 b) 1/12 c) 24 d) 1/24

Last Answer : b) 1/12

Description : Find the resistance of a cylinder of area 200 units and length 100m with conductivity of 12 units. a) 1/24 b) 1/48 c) 1/12 d) 1/96

Last Answer : a) 1/24

Description : Gauss law can be evaluated in which coordinate system? a) Cartesian b) Cylinder c) Spherical d) Depends on the Gaussian surface

Last Answer : d) Depends on the Gaussian surface

Description : The Gaussian surface for a point charge will be a) Cube b) Cylinder c) Sphere d) Cuboid

Last Answer : c) Sphere

Description : The Gaussian surface for a line charge will be a) Sphere b) Cylinder c) Cube d) Cuboid

Last Answer : b) Cylinder

Description : The centre of percussion of a solid cylinder of radius r resting on a horizontal plane will be  (A) r/2  (B) 2r/3  (C) r/A (D) 3r/2 

Last Answer : (D) 3r/2 

Description : A dash pot consists of a cylinder 10 cm in diameter in which slides a piston 12 cm long having a radial clearance of 1 mm. The cylinder is filled with oil having a viscosity of 1 poise. What will be the resistance offered ... with a velocity of 3 cm/sec a.1090 kg b.100 kg c.10900 kg d.10 kg e.50 kg

Last Answer : c. 10900 kg

Description : What is the speed of the piston in the cylinder of a petrol engine ?

Last Answer : The speed of the piston in the cylinder of a petrol engine is also the speed of the alternator.

Description : If a master cylinder with a two-square-inch piston travels 1/2 inch how far would the wheel cylinder with one -square-inch piston be moved?

Last Answer : -1

Description : If piston displacement is deducted from the total volume of cylinder the remaining volume is known as 1. piston displacement 2. Clearance volume 3. displacement volume 4.compression ratio

Last Answer : ans 2

Description : Piston-cylinder arrangement of an internal combustion engine in automobile is called _________.  1. Rotary Joints  2. Prismatic Joints  3. Revolute Joints  4. Spherical Joints

Last Answer : 2

Description : A gas is compressed in a cylinder by a movable piston to a volume onehalf its original volume. During the process 300 kJ heat left the gas and internal energy remained same. The work done on gas in Nm will be  (a) 300 Nm  (b) 300,000 Nm  (c) 30 Nm  (d) 3000 Nm  (e) 30,000 Nm.

Last Answer : Answer : b

Description : The EGT indication on a piston engine is used: a. To control the cooling air shutters b. To monitor the oil temperature c. To assist the pilot to adjust the fuel mixture d. To indicate cylinder head temperature

Last Answer : c. To assist the pilot to adjust the fuel mixture

Description : The EGT indication on a piston engine is used: a. To control the cooling air shutters b. To monitor the oil temperature c. To assist the pilot to adjust the fuel mixture d. To indicate cylinder head temperature

Last Answer : c. To assist the pilot to adjust the fuel mixture

Description : hen displacement volume is divided by piston displacement, what will we obtained (a) number of cylinders (b) number of power stroke per minute for all cylinders (c) number of revolution of the crankshaft (engine) (d) number of revolution of crankshaft × number of cylinder

Last Answer : (b) number of power stroke per minute for all cylinders

Description : Find whether the vector is solenoidal, E = yz i + xz j + xy k a) Yes, solenoidal b) No, non-solenoidal c) Solenoidal with negative divergence d) Variable divergence

Last Answer : a) Yes, solenoidal

Description : Show digramatically the changes in the position of piston, if a. Pressure is increased from 1.0 bar to 2.0 bar at constant temperature. 

Last Answer : Consider a sample of a gas in a cylinder with a movable piston. Show digramatically the changes in ... pressure is decreased from 4 bar to 3 bar.

Description : The power of a wave in a cylindrical waveguide of radius 2m with electric field 12 units is a) 2.39 b) 3.92 c) 9.23 d) 9.32

Last Answer : a) 2.39

Description : Calculate the flux density due to a circular conductor of radius 100nm and current 5A in air. a) 10 b) 100 c) 0.1 d) 1

Last Answer : a) 10

Description : Find the orbital angular moment of a dipole with angular velocity of 1.6m/s and radius 35cm(in 10-31 order) a) 1.78 b) 8.71 c) 7.18 d) 2.43

Last Answer : a) 1.78

Description : Find the orbital dipole moment in a field of dipoles of radius 20cm and angular velocity of 2m/s(in 10 -22 order) a) 64 b) 76 c) 54 d) 78

Last Answer : a) 64

Description : Find the flux density of a conductor in the square of the centre of the loop having current 3.14A and radius is 1.414m in air. a) 8π x 10 -7 b) 4π x 10 -7 c) 6π x 10 -7 d) 2π x 10 -7

Last Answer : c) 6π x 10 -7

Description : Find the magnetic field intensity of a toroid of turns 40 and radius 20cm. The current carried by the toroid be 3.25A. a) 103.45 b) 102 c) 105.7 d) 171

Last Answer : a) 103.45

Description : Find the magnetic field intensity at the radius of 6cm of a coaxial cable with inner and outer radii are 1.5cm and 4cm respectively. The current flowing is 2A. a) 2.73 b) 3.5 c) 0 d) 1.25

Last Answer : c) 0

Description : Find the magnetic flux density of a finite length conductor of radius 12cm and current 3A in air( in 10 -6 order) a) 4 b) 5 c) 6 d) 7

Last Answer : b) 5

Description : Find the magnetic field when a circular conductor of very high radius is subjected to a current of 12A and the point P is at the centre of the conductor. a) 1 b) ∞ c) 0 d) -∞

Last Answer : c) 0

Description : Find the magnetic flux density when a point from a finite current length element of current 0.5A and radius 100nm. a) 0 b) 0.5 c) 1 d) 2

Last Answer : c) 1

Description : Calculate the magnetic field at a point on the centre of the circular conductor of radius 2m with current 8A. a) 1 b) 2 c) 3 d) 4

Last Answer : b) 2

Description : A cable of core radius 1.25cm and impregnated paper insulation of thickness 2.13cm and relative permittivity 3.5. Compute the capacitance of the cable/km(in nF) a) 195.7 b) 179.5 c) 157.9 d) 197.5

Last Answer : a) 195.7

Description : Compute the capacitance between two concentric shells of inner radius 2m and the outer radius is infinitely large. a) 0.111 nF b) 0.222 nF c) 4.5 nF d) 5.4 nF

Last Answer : b) 0.222 nF