If a master cylinder with a two-square-inch piston travels 1/2 inch how far would the wheel cylinder with one -square-inch piston be moved?

If a master cylinder with a two-square-inch piston travels 1/2 inch how far would the wheel cylinder with one -square-inch piston be moved?
by

1 Answer

Answer :

-1
by
selected by

Related questions

A dash pot consists of a cylinder 10 cm in diameter in which slides a piston 12 cm long having a radial clearance of 1 mm. The cylinder is filled with oil having a viscosity of 1 poise. What will be the resistance offered by the piston to sliding with a velocity of 3 cm/sec a.1090 kg b.100 kg c.10900 kg d.10 kg e.50 kg

Description : A dash pot consists of a cylinder 10 cm in diameter in which slides a piston 12 cm long having a radial clearance of 1 mm. The cylinder is filled with oil having a viscosity of 1 poise. What will be the resistance offered ... with a velocity of 3 cm/sec a.1090 kg b.100 kg c.10900 kg d.10 kg e.50 kg

Last Answer : c. 10900 kg

What is the speed of the piston in the cylinder of a petrol engine ?

Description : What is the speed of the piston in the cylinder of a petrol engine ?

Last Answer : The speed of the piston in the cylinder of a petrol engine is also the speed of the alternator.

The pressure inside a piston cylinder is a variable of a) Radius b) Plane angle c) Z plane distance d) Constant, not a variable

Description : The pressure inside a piston cylinder is a variable of a) Radius b) Plane angle c) Z plane distance d) Constant, not a variable

Last Answer : c) Z plane distance

For a reciprocating pump, the indicator diagram is the graph between the (A) Discharge and overall efficiency (B) Volume swept by piston for one complete revolution and the pressure in the cylinder (C) Angle swept by the crank pin at any instant and the discharge (D) None of these

Description : For a reciprocating pump, the indicator diagram is the graph between the (A) Discharge and overall efficiency (B) Volume swept by piston for one complete revolution and the pressure in the cylinder (C) Angle swept by the crank pin at any instant and the discharge (D) None of these

Last Answer : (B) Volume swept by piston for one complete revolution and the pressure in the cylinder

One mole of nitrogen at 8 bar and 600 K is contained in a piston cylinder arrangement. It is brought to 1 bar isothermally against a resisting pressure of 1 bar. The work done (in Joules) by the gas is (A) 30554 (B) 10373 (C) 4988.4 (D) 4364.9

Description : One mole of nitrogen at 8 bar and 600 K is contained in a piston cylinder arrangement. It is brought to 1 bar isothermally against a resisting pressure of 1 bar. The work done (in Joules) by the gas is (A) 30554 (B) 10373 (C) 4988.4 (D) 4364.9

Last Answer : (B) 10373

If piston displacement is deducted from the total volume of cylinder the remaining volume is known as 1. piston displacement 2. Clearance volume 3. displacement volume 4.compression ratio

Description : If piston displacement is deducted from the total volume of cylinder the remaining volume is known as 1. piston displacement 2. Clearance volume 3. displacement volume 4.compression ratio

Last Answer : ans 2

Piston-cylinder arrangement of an internal combustion engine in automobile is called _________.  1. Rotary Joints  2. Prismatic Joints  3. Revolute Joints  4. Spherical Joints

Description : Piston-cylinder arrangement of an internal combustion engine in automobile is called _________.  1. Rotary Joints  2. Prismatic Joints  3. Revolute Joints  4. Spherical Joints

Last Answer : 2

Gas is enclosed in a cylinder with a weighted piston as the stop boundary. The gas is heated and expands from a volume of 0.04 m^3 to 0.10 m^3 at a constant pressure of 200kPa.Calculate the work done by the system.  A. 8 kJ  B. 10 kJ  C.12 kJ  D.14 kJ Formula: W = p(V2-V1)

Description : Gas is enclosed in a cylinder with a weighted piston as the stop boundary. The gas is heated and expands from a volume of 0.04 m^3 to 0.10 m^3 at a constant pressure of 200kPa.Calculate the work done by the system.  A. 8 kJ  B. 10 kJ  C.12 kJ  D.14 kJ Formula: W = p(V2-V1)

Last Answer : 12 kJ

A gas is enclosed in a cylinder with a weighted piston as the top boundary. The gas is heated and expands from a volume of 0.04 m3 to 0.10 m3 at a constant pressure of 200 kPa. Find the work done on the system.  a. 5 kJ  b. 15 kJ  c. 10 kJ  d. 12 kJ

Description : A gas is enclosed in a cylinder with a weighted piston as the top boundary. The gas is heated and expands from a volume of 0.04 m3 to 0.10 m3 at a constant pressure of 200 kPa. Find the work done on the system.  a. 5 kJ  b. 15 kJ  c. 10 kJ  d. 12 kJ

Last Answer : 12 kJ

A gas is compressed in a cylinder by a movable piston to a volume onehalf its original volume. During the process 300 kJ heat left the gas and internal energy remained same. The work done on gas in Nm will be  (a) 300 Nm  (b) 300,000 Nm  (c) 30 Nm  (d) 3000 Nm  (e) 30,000 Nm.

Description : A gas is compressed in a cylinder by a movable piston to a volume onehalf its original volume. During the process 300 kJ heat left the gas and internal energy remained same. The work done on gas in Nm will be  (a) 300 Nm  (b) 300,000 Nm  (c) 30 Nm  (d) 3000 Nm  (e) 30,000 Nm.

Last Answer : Answer : b

The EGT indication on a piston engine is used: a. To control the cooling air shutters b. To monitor the oil temperature c. To assist the pilot to adjust the fuel mixture d. To indicate cylinder head temperature

Description : The EGT indication on a piston engine is used: a. To control the cooling air shutters b. To monitor the oil temperature c. To assist the pilot to adjust the fuel mixture d. To indicate cylinder head temperature

Last Answer : c. To assist the pilot to adjust the fuel mixture

The EGT indication on a piston engine is used: a. To control the cooling air shutters b. To monitor the oil temperature c. To assist the pilot to adjust the fuel mixture d. To indicate cylinder head temperature

Description : The EGT indication on a piston engine is used: a. To control the cooling air shutters b. To monitor the oil temperature c. To assist the pilot to adjust the fuel mixture d. To indicate cylinder head temperature

Last Answer : c. To assist the pilot to adjust the fuel mixture

The piston rod of a hydraulic cylinder exerts an operating force of 10kN. The allowable stress in the cylinder is 45N/mm². Calculate the thickness of the cylinder using Lame’s equation. Diameter of the cylinder is 40mm and pressure in cylinder is 10MPa. a) 2.05mm b) 4.2mm c) 5.07mm d) None of the listed

Description : The piston rod of a hydraulic cylinder exerts an operating force of 10kN. The allowable stress in the cylinder is 45N/mm². Calculate the thickness of the cylinder using Lame's equation. Diameter of the cylinder is 40mm and ... is 10MPa. a) 2.05mm b) 4.2mm c) 5.07mm d) None of the listed

Last Answer : c) 5.07mm

hen displacement volume is divided by piston displacement, what will we obtained (a) number of cylinders (b) number of power stroke per minute for all cylinders (c) number of revolution of the crankshaft (engine) (d) number of revolution of crankshaft × number of cylinder

Description : hen displacement volume is divided by piston displacement, what will we obtained (a) number of cylinders (b) number of power stroke per minute for all cylinders (c) number of revolution of the crankshaft (engine) (d) number of revolution of crankshaft × number of cylinder

Last Answer : (b) number of power stroke per minute for all cylinders

At one atmosphere, a cylinder with movable piston contains 2,000 milliliters of gas. If the pressure is increased to 5 atmospheres and the temperature remains unchanged, what is the new volume of the gas? w) 10,000 milliliters x) 400 milliliters y) 1,000 milliliters z) 4,000 milliliters

Description : At one atmosphere, a cylinder with movable piston contains 2,000 milliliters of gas. If the pressure is increased to 5 atmospheres and the temperature remains unchanged, what is the new volume of the gas? w) 10,000 milliliters x) 400 milliliters y) 1,000 milliliters z) 4,000 milliliters

Last Answer : ANSWER: X -- 400 MILLILITERS

Liquid "X" is at equilibrium with its vapor in a cylinder and piston apparatus. When the volume of the space above the liquid is 50 ml and the temperature 25!, the vapor pressure of "X" is 120 torr. What will the vapor pressure of "X" be when the volume above the liquid is 100 ml and the temperature 25!C? Some liquid is always present. w) 30 torr x) 60 torr y) 120 torr z) 240 torr

Description : Liquid "X" is at equilibrium with its vapor in a cylinder and piston apparatus. When the volume of the space above the liquid is 50 ml and the temperature 25!, the vapor pressure of "X" is 120 torr. What will the ... 25!C? Some liquid is always present. w) 30 torr x) 60 torr y) 120 torr z) 240 torr

Last Answer : ANSWER: Y -- 120 TORR

As shown in the illustration, what is responsible for maintaining the "LV" relay energized when the master switch handle is moved away from the "off" position? EL-0102 A. "DBa" contact. B. Reset contacts. C. Upper set of "LVa" contacts. D. Lower set of "LVa" contacts.

Description : As shown in the illustration, what is responsible for maintaining the "LV" relay energized when the master switch handle is moved away from the "off" position? EL-0102 A. "DBa" contact. B. Reset contacts. C. Upper set of "LVa" contacts. D. Lower set of "LVa" contacts.

Last Answer : Answer: C

Can I put 17 inch tires on my existing wheel?

Description : Can I put 17 inch tires on my existing wheel?

Last Answer : If you want to replace the current tires on your vehicle with a 17 inch tire you will have to have the proper rims for that tire. If you currently have rims for a 17 inch tire then you would not have to replace them but if your tire rims are smaller or larger then they would have to be replaced.

the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of a. Cylinder b. Hum c. Cluster d. Surface

Description : the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of a. Cylinder b. Hum c. Cluster d. Surface

Last Answer : Surface

the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of a. Cylinder b. Hum c. Cluster d. Surface

Description : the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of a. Cylinder b. Hum c. Cluster d. Surface

Last Answer : d. Surface

the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of a. Cylinder b. Hum c. Cluster d. Surface

Description : the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of a. Cylinder b. Hum c. Cluster d. Surface

Last Answer : d. Surface

Tandem master cylinder consists of (A) One cylinder and one reservoir (B) Two cylinders and one reservoir (C) One cylinder and two reservoirs (D) Two cylinders and two reservoirs

Description : Tandem master cylinder consists of (A) One cylinder and one reservoir (B) Two cylinders and one reservoir (C) One cylinder and two reservoirs (D) Two cylinders and two reservoirs

Last Answer : (D) Two cylinders and two reservoirs

A group of magnetic tapes, videos or terminals usually under the control of one master is A) Cylinder B) Surface C) Track D) Cluster

Description : A group of magnetic tapes, videos or terminals usually under the control of one master is A) Cylinder B) Surface C) Track D) Cluster

Last Answer : Answer : D

A group of magnetic tapes, videos or terminals usually under the control of one master is a. Cylinder b. Surface c. Track d. Cluster

Description : A group of magnetic tapes, videos or terminals usually under the control of one master is a. Cylinder b. Surface c. Track d. Cluster

Last Answer : d. Cluster

A group of magnetic tapes, videos or terminals usually under the control of one master is a. Cylinder b. Surface c. Track d. Cluster

Description : A group of magnetic tapes, videos or terminals usually under the control of one master is a. Cylinder b. Surface c. Track d. Cluster

Last Answer : d. Cluster

A group of magnetic tapes, videos or terminals usually under the control of one master is a. Cylinder b. Surface c. Track d. Cluster

Description : A group of magnetic tapes, videos or terminals usually under the control of one master is a. Cylinder b. Surface c. Track d. Cluster

Last Answer : d. Cluster

how,he speed of sound is about 3.4 × 102 meters per second. Mark is performing a science experiment and he needs to know how far sound travels in 3 × 1010 seconds. If Mark uses a calculator to solve this problem, how will the calculator show the answer?

Description : how,he speed of sound is about 3.4 × 102 meters per second. Mark is performing a science experiment and he needs to know how far sound travels in 3 × 1010 seconds. If Mark uses a calculator to solve this problem, how will the calculator show the answer?

Last Answer : 10200000000000

An object travels from a fixed position 5 seconds to start the journey. After 20 m / s. Velocity is. Next 10 sec. How far will it cover ?

Description : An object travels from a fixed position 5 seconds to start the journey. After 20 m / s. Velocity is. Next 10 sec. How far will it cover ?

Last Answer : The distance covered by the object in the next 10 seconds s = vt s = 20 × 10 = 200m

How far will a free falling object cover 3 seconds if it travels a distance of 6 seconds 72 meters ?

Description : How far will a free falling object cover 3 seconds if it travels a distance of 6 seconds 72 meters ?

Last Answer : h = ut + 0.5 * g * t ^ 2 => h = 0 + 0.5 * 9.8 * 3 ^ 2 => h = 44.1 m. 44.1 meters.

If A car travels at 60kmhr how far does it travels in 3 and a half hours?

Description : If A car travels at 60kmhr how far does it travels in 3 and a half hours?

Last Answer : Every hour the car would cover 60 kilometres.Therefore, 60 x 3 = 180 + 30 = 210 kilometres in total.

What is the answer of an elevator travels 310 feet in 10 seconds. At that speed how far can this elevator travel in 12 seconds Explain your reasoning.?

Description : What is the answer of an elevator travels 310 feet in 10 seconds. At that speed how far can this elevator travel in 12 seconds Explain your reasoning.?

Last Answer : At 31 fps, the elevator will travel 372 feet in 12 seconds.

How far will a 26 inch diameter bicycle tire travel each time it turns?

Description : How far will a 26 inch diameter bicycle tire travel each time it turns?

Last Answer : 81.7 inches

Would it bother you if your master bedroom was far from the kitchen?

Description : Would it bother you if your master bedroom was far from the kitchen?

Last Answer : I can’t imagine why I would care. I don’t go back and forth between the two as I don’t eat in the bedroom. We keep bottled water in an upstairs refrigerator and have a one-cup coffee maker in the bedroom.

Wouldn't Trump be far more dangerous were he to master the urge to run his mouth?

Description : Wouldn't Trump be far more dangerous were he to master the urge to run his mouth?

Last Answer : Yes, I think the best friend of those who oppose him is his Twitter account. There we see who he really is.

how many 4 inch plants on a 6 inch center do i need to fill 460 square feet ?

Description : how many 4 inch plants on a 6 inch center do i need to fill 460 square feet ?

Last Answer : I have a area 11ft by 20ft how maney sq ft do i have

How many square centimeters is equal to 1 square inch ?

Description : How many square centimeters is equal to 1 square inch ?

Last Answer : 1 square inch - 6.4518 square cm. .

What is the air pressure per square inch on a normal human being ?

Last Answer : Normally, air pressure on a human being is 15 pounds per square inch.

How many square centimeters in 1 square inch ?

Last Answer : 8.45 sq cm in 1 sq. inch.

How much pressure per square inch is on human foot when going down stairs?

Description : How much pressure per square inch is on human foot when going down stairs?

Last Answer : You can't say 'pressure per square inch. It's just 'pressure',which equals force per square inch. You divide the person's weightby the area of the foot in contact with the stairs to get theanswer.

How many 8 inch x 32 inch tiles would it take to tile 54 square feet?

Description : How many 8 inch x 32 inch tiles would it take to tile 54 square feet?

Last Answer : You would require a minimum of 31, but that is only if the areais a rectangle with sides of specific lengths or if you are happyto use up all off-cuts as mosaic. For a rectangle of ... non-rectangular area, you will require more: how many moredepends on the precise shape and your tiling skills.

How many square inches in a 8 inch circle?

Description : How many square inches in a 8 inch circle?

Last Answer : That depends on what the 8 inches represents but the area of acircle is pi*radius^2

How many square inches in a 8 inch diameter circle?

Description : How many square inches in a 8 inch diameter circle?

Last Answer : Area = pi*42 = 50.265 square inches to 3 decimal places

Is steel sheet material generally sold by the pound or square inch, and what are some prices?

Description : Is steel sheet material generally sold by the pound or square inch, and what are some prices?

Last Answer : Steel sheets are generally sold by the size instead of the weight of the peice. Depending on the thickness of the steel sheet the price may very well vary. An example a thinner steel sheet of 12 inch ... finding prices. For Example a 24x24 sheet of T-301 .016" thick stainless steel sells for 100$.

How many 8-inch by 8-inch hexagon tiles do you need to fill a 36 square foot room?

Description : How many 8-inch by 8-inch hexagon tiles do you need to fill a 36 square foot room?

Last Answer : 5,290 Pieces

The standard measuring unit of wire by its cross-sectional area, as used in American wire tables is the _____________. A. AWG B. circular mil C. square millimeter D. cubic inch

Description : The standard measuring unit of wire by its cross-sectional area, as used in American wire tables is the _____________. A. AWG B. circular mil C. square millimeter D. cubic inch

Last Answer : Answer: B

Mesh indicates the number of holes per (A) Square inch (B) Linear inch (C) Square foot (D) Linear foot

Description : Mesh indicates the number of holes per (A) Square inch (B) Linear inch (C) Square foot (D) Linear foot

Last Answer : (B) Linear inch

It is observed that the total pressure exerted by air on the man of average size is around 14.7 lb wt. per square inch. But the man feels quite comfortable,. It is because of-----? A. An equal and opposite pressure acts from inside (Answer) B. of the height of a man C. of gravity D. Earth pulls the man upward E. None of these

Description : It is observed that the total pressure exerted by air on the man of average size is around 14.7 lb wt. per square inch. But the man feels quite comfortable,. It is because of-----? A. An equal and ... B. of the height of a man C. of gravity D. Earth pulls the man upward E. None of these

Last Answer : A. An equal and opposite pressure acts from inside (Answer)

To within 1 pound per square inch, what is the nominal pressure due to water at a depth of 100 feet below the surface of a body of water?

Description : To within 1 pound per square inch, what is the nominal pressure due to water at a depth of 100 feet below the surface of a body of water?

Last Answer : ANSWER: 43.3 POUNDS PER SQUARE INCH (accept 42.3 to 44.3) 

What is the SI unit for pressure? w) Torr x) pounds per square inch y) Pascal z) Kelvin

Description : What is the SI unit for pressure? w) Torr x) pounds per square inch y) Pascal z) Kelvin

Last Answer : ANSWER: Y -- PASCAL