In IPv6,a _________address comprises 80 bits of zero, followed by16 bitsof one, followed by the 32-bit IPv4address. A) link local B) site local C) mapped D) none of the above

In IPv6,a _________address comprises 80 bits of zero, followed by16 bitsof one, followed by the 32-bit IPv4address.
A)
link local
B)
site local
C)
mapped
D)
none of the above
by

1 Answer

Answer :

mapped
by

Related questions

In IPv6,a ___________ address is anaddress of 96 bits of zero followed by32 bits of IPv4 address. A) link local B) site local C) mapped D) none of the above

Description : In IPv6,a ___________ address is anaddress of 96 bits of zero followed by32 bits of IPv4 address. A) link local B) site local C) mapped D) none of the above

Last Answer : none of the above

In IPv6,a ______address is used ifa site with several networks uses the Internetprotocols but is not connectedto the Internet for security reasons. A) link local B) site local C) mapped D) none of the abov

Description : In IPv6,a ______address is used ifa site with several networks uses the Internetprotocols but is not connectedto the Internet for security reasons. A) link local B) site local C) mapped D) none of the abov

Last Answer : site local

In IPv6,a _______address is usedif aLAN uses the Internet protocols but isnot connected tothe Internet for security reasons. A) link local B) site local C) mapped D) none of the above

Description : In IPv6,a _______address is usedif aLAN uses the Internet protocols but isnot connected tothe Internet for security reasons. A) link local B) site local C) mapped D) none of the above

Last Answer : link local

. In IPv6, the___________ address isgenerally usedby a normal host as a unicast address. A) provider-based unicast B) link local C) site local D) none of the above

Description : . In IPv6, the___________ address isgenerally usedby a normal host as a unicast address. A) provider-based unicast B) link local C) site local D) none of the above

Last Answer : provider-based unicast

An IPv6 address is _________ bits long A. 32 B. 64 C. 128 D. none of the above

Description : An IPv6 address is _________ bits long A. 32 B. 64 C. 128 D. none of the above

Last Answer : C. 128

A 8-Mbps tokenring has atoken holding timer value of 10 msec. What is the longest frame (assumeheader bits are negligible) that canbe sent on this ring? A. 8000 B frame B. 80,000 B frame C. 8 x 105 bit frame D. 10,000 B frame

Description : A 8-Mbps tokenring has atoken holding timer value of 10 msec. What is the longest frame (assumeheader bits are negligible) that canbe sent on this ring? A. 8000 B frame B. 80,000 B frame C. 8 x 105 bit frame D. 10,000 B frame

Last Answer : 10,000 B frame

How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Last Answer : b. 800

If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ______. a. 64 Kbps b. 32 Mbps c. 32 Kbps d. 64 MbpS

Description : If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ______. a. 64 Kbps b. 32 Mbps c. 32 Kbps d. 64 MbpS

Last Answer : c. 32 Kbps

What is size of the IPv6 Address? A. 32 bits B. 64 bits C. 128 bits D. 256 bits

Description : What is size of the IPv6 Address? A. 32 bits B. 64 bits C. 128 bits D. 256 bits

Last Answer : C. 128 bits 

IPv6 has _______ -bit addresses. A. 32B. 64 C. 128 D. Variable

Description : IPv6 has _______ -bit addresses. A. 32 B. 64 C. 128 D. Variable

Last Answer : C. 128

A byte consists of a. One bit b. Four bits c. Eight bits d. Sixteen bits

Description : A byte consists of a. One bit b. Four bits c. Eight bits d. Sixteen bits

Last Answer : Eight bits

A byte consists of a. One bit b. Four bits c. Eight bits d. Sixteen bits

Description : A byte consists of a. One bit b. Four bits c. Eight bits d. Sixteen bits

Last Answer : Eight bits

A band is always equivalent to a. a byte b. a bit c. 100 bits d. none of above

Description : A band is always equivalent to a. a byte b. a bit c. 100 bits d. none of above

Last Answer : none of above

We addr redundant bits toeach block to make thelength n = k + r. The resultingn-bit blocksare called _________. A) datawords B) blockwords C) codewords D) none of the above

Description : We addr redundant bits toeach block to make thelength n = k + r. The resultingn-bit blocksare called _________. A) datawords B) blockwords C) codewords D) none of the above

Last Answer : codewords

A burst error means that two or more bits in the dataunit havechanged. A) double-bit B) burst C) single-bit D) none of the above

Description : A burst error means that two or more bits in the dataunit havechanged. A) double-bit B) burst C) single-bit D) none of the above

Last Answer : burst

The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM

Description : The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM

Last Answer : DSSS

In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Description : In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Last Answer : asynchronous

The least significant 23 bits in a 48-bit Ethernet address identify a ________. A) multicast router B) host C) multicast group D) noneof the above

Description : The least significant 23 bits in a 48-bit Ethernet address identify a ________. A) multicast router B) host C) multicast group D) noneof the above

Last Answer : multicast group

Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Description : Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Last Answer : d. 256

We add r redundant bits to each block to make the length n = k + r. The resulting n-bit blocks are called _________ A. datawords B. blockwords C. codewords D. none of the above

Description : We add r redundant bits to each block to make the length n = k + r. The resulting n-bit blocks are called _________ A. datawords B. blockwords C. codewords D. none of the above

Last Answer : C. codewords

An IPv4 address consistsof _______ bits. A) 4 B) 8 C) 32 D) 64

Description : An IPv4 address consistsof _______ bits. A) 4 B) 8 C) 32 D) 64

Last Answer : 32

How many bits internet address isassigned to eachhost on a TCP/IP internet which is used in all communications withthehost? A. 16 - bits B. 32 - bits C. 48 - bits D. 64 - bits E. None of the above

Description : How many bits internet address isassigned to eachhost on a TCP/IP internet which is used in all communications withthehost? A. 16 - bits B. 32 - bits C. 48 - bits D. 64 - bits E. None of the above

Last Answer : 32 - bits

Suppose transmission rate of a channel is 32 kbps. If there are ‘8’ routes from source to destination and each packet p contains 8000 bits. Total end to end delay in sending packet P is _____. a. 2 sec b. 3 sec c. 4 sec d. 1 sec

Description : Suppose transmission rate of a channel is 32 kbps. If there are ‘8’ routes from source to destination and each packet p contains 8000 bits. Total end to end delay in sending packet P is _____. a. 2 sec b. 3 sec c. 4 sec d. 1 sec

Last Answer : a. 2 sec

The Internet addresses are ______ bits in length in IPV4 addressing scheme A. 16 B. 64 C. 32 D. 48

Description : The Internet addresses are ______ bits in length in IPV4 addressing scheme A. 16 B. 64 C. 32 D. 48

Last Answer : C. 32

The Internet addresses are ……….. bits in length in IPV4 addressing scheme a. 16 b. 64 c. 48 d. 32

Description : The Internet addresses are ……….. bits in length in IPV4 addressing scheme a. 16 b. 64 c. 48 d. 32

Last Answer : d. 32

A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of an acknowledgement is 100 bytes and the transmission rate at the receiver is 8 Kbps. The one-way propagation delay is 100 milliseconds. Assuming no frame is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Last Answer : a. 2500

The..............layer change bits onto electromagnetic signals. A) Physical B) Transport C) Data Link D) Presentation

Description : The..............layer change bits onto electromagnetic signals. A) Physical B) Transport C) Data Link D) Presentation

Last Answer : A) Physical

The _____ layer uses data compression to reduce the number of bits to be transmitted. a. presentation b. network c. data link d. application

Description : The _____ layer uses data compression to reduce the number of bits to be transmitted. a. presentation b. network c. data link d. application

Last Answer : a. presentation

How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Last Answer : b. 12,000 bytes

The _______ layer provides a well defined service interface to the network layer, determining how the bits of the physical layer are grouped into frames A. Data Link B. Physical C. Network D. Session

Description : The _______ layer provides a well defined service interface to the network layer, determining how the bits of the physical layer are grouped into frames A. Data Link B. Physical C. Network D. Session

Last Answer : A. Data Link

The sender is a router thathas receiveda datagram destinedfor a host on thesame network. The logical address that mustbe mapped to a physical address is ______. A) thedestination IP address in the datagram header B) the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Description : The sender is a router thathas receiveda datagram destinedfor a host on thesame network. The logical address that mustbe mapped to a physical address is ______. A) thedestination IP address in the datagram ... IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : thedestination IP address in the datagram header

The sender is a router thathas receiveda datagram destinedfor a host on anothernetwork. The logicaladdress that must be mapped to aphysical address is ______. A) thedestination IP address in the datagram headerB)the IP address of therouter found inthe routing tableC)either a or bD)noneof the above

Description : The sender is a router thathas receiveda datagram destinedfor a host on anothernetwork. The logicaladdress that must be mapped to aphysical address is ______. A) thedestination IP address in the datagram header ... address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : thedestination IP address in the datagram header

If the sender is a host and wants tosend a packet toanotherhost on another network, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram header B) the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Description : If the sender is a host and wants tosend a packet toanotherhost on another network, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram ... the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : the IP address of therouter found inthe routing table

f the sender is a host and wants tosend a packet toanotherhost on the samenetwork, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram header B) the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Description : f the sender is a host and wants tosend a packet toanotherhost on the samenetwork, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram ... the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : hedestination IP address in the datagram header

IPv4 and IPv6 are addresses used to identify computers on the internet. Find the correct statement out of the following: (A) Number of bits required for IPv4 address is more than number of bits required for IPv6 address. (B) Number of bits required for IPv4 address is same as number of bits required for IPv6 address. (C) Number of bits required for IPv4 address is less than number of bits required for IPv6 address. (D) Number of bits required for IPv4 address is 64.

Description : IPv4 and IPv6 are addresses used to identify computers on the internet. Find the correct statement out of the following: (A) Number of bits required for IPv4 address is more than number of bits required for ... of bits required for IPv6 address. (D) Number of bits required for IPv4 address is 64. 

Last Answer : (C) Number of bits required for IPv4 address is less than number of bits required for IPv6 address.

In IPv6, the ________ prefix defines the purpose of the address. A) type B) purpose C) both a and b D) none of the above

Description : In IPv6, the ________ prefix defines the purpose of the address. A) type B) purpose C) both a and b D) none of the above

Last Answer : type

In IPv6,_________addressdefinesagroup of computers. A) aunicast B) a multicast C) an anycast D) none of the above

Description : In IPv6,_________addressdefinesagroup of computers. A) aunicast B) a multicast C) an anycast D) none of the above

Last Answer : a multicast

In IPv6,____ address defines a groupof computers with addresses that have thesame prefix. A) aunicast B) a multicast C) an anycast D) none of the above

Description : In IPv6,____ address defines a groupof computers with addresses that have thesame prefix. A) aunicast B) a multicast C) an anycast D) none of the above

Last Answer : an anycast

In IPv6,_______ address defines asingle computer. A) aunicast B) a multicast C) an anycast D) none of the above

Description : In IPv6,_______ address defines asingle computer. A) aunicast B) a multicast C) an anycast D) none of the above

Last Answer : aunicast

To makeaddresses morereadable, IPv6 specifies____________notation. A) dotted decimal B) hexadecimal colon C) both a and b D) none of the above

Description : To makeaddresses morereadable, IPv6 specifies____________notation. A) dotted decimal B) hexadecimal colon C) both a and b D) none of the above

Last Answer : hexadecimal colon

In IPv6, the _______ field inthe baseheader and thesender IP address combineto indicate aunique path identifier for aspecific flow of data. A) flow label B) nextheader C) hoplimit D) destination IP address

Description : In IPv6, the _______ field inthe baseheader and thesender IP address combineto indicate aunique path identifier for aspecific flow of data. A) flow label B) nextheader C) hoplimit D) destination IP address

Last Answer : flow label

In IPv6, when a datagram needs tobediscarded ina congested network, the decision is basedon the _______ field in thebase header. A) hop limit B) priority C) nextheader D) noneof the above

Description : In IPv6, when a datagram needs tobediscarded ina congested network, the decision is basedon the _______ field in thebase header. A) hop limit B) priority C) nextheader D) noneof the above

Last Answer : priority

IPv6 allows _________ security provisions than IPv4. A) more B) less C) thesame level D) noneof the above

Description : IPv6 allows _________ security provisions than IPv4. A) more B) less C) thesame level D) noneof the above

Last Answer : more

In IPv6,options are inserted between the _________and the ___________ data. A) baseheader;extensionheader B) baseheader;upper-layer data C) base header; frame header D) noneof the abov

Description : In IPv6,options are inserted between the _________and the ___________ data. A) baseheader;extensionheader B) baseheader;upper-layer data C) base header; frame header D) noneof the abov

Last Answer : baseheader;upper-layer data

In IPv6, the _______ field inthe baseheader restricts the lifetime ofa datagram. A) version B) next-header C) hoplimit D) neighbor-advertisemen

Description : In IPv6, the _______ field inthe baseheader restricts the lifetime ofa datagram. A) version B) next-header C) hoplimit D) neighbor-advertisemen

Last Answer : hoplimit

Which of the following is anecessary part of the IPv6 datagram? A) Base header B) Extension header C) Data packet from the upper layer D) (a) and (c)

Description : Which of the following is anecessary part of the IPv6 datagram? A) Base header B) Extension header C) Data packet from the upper layer D) (a) and (c)

Last Answer : Base header

IPv6 does not support which of the following addressing modes? a. unicast addressing b. multicast addressing c. broadcast addressing d. anycast addressing

Description : IPv6 does not support which of the following addressing modes? a. unicast addressing b. multicast addressing c. broadcast addressing d. anycast addressing

Last Answer : c. broadcast addressing

State weather the following statement is true or false for IPV6 Addressing 1). IPV6 is a routable protocol that addresses, routes, fragments, and reassembles packets 2).IPV6 is a connectionless, unreliable datagram protocol. 3). An IPV6 packet consists of an IPV6 header and an IPV6 payload. A. 1. True, 2. true, 3. true B. 1. true, 2. false, 3. false C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Description : State weather the following statement is true or false for IPV6 Addressing 1). IPV6 is a routable protocol that addresses, routes, fragments, and reassembles packets 2).IPV6 is a connectionless, unreliable datagram protocol. 3). ... C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Last Answer : A. 1. True, 2. true, 3. true

In IPv6, _______ address defines a single computer A. a unicast B. a multicastC. an anycast D. none of the above

Description : In IPv6, _______ address defines a single computer A. a unicast B. a multicast C. an anycast D. none of the above

Last Answer : A. a unicast