_______is the rateof change with respect totime. A) Amplitude B) Time C) Frequency D) Voltage

_______is the rateof change with respect totime.
A)
Amplitude
B)
Time
C)
Frequency
D)
Voltage
by

2 Answers

Answer :

Frequency
by

Answer :

Time
by

Related questions

If digitaldata rateof 9600 bps is encoded using 8-level phaseshift keying (PSK) method, the modulation rate is A. 1200 bands B. 3200 bands C. 4800 bands D. 9600 bands E. None of the above

Description : If digitaldata rateof 9600 bps is encoded using 8-level phaseshift keying (PSK) method, the modulation rate is A. 1200 bands B. 3200 bands C. 4800 bands D. 9600 bands E. None of the above

Last Answer : 3200 bands

_______ describes the position of the waveform relative to time 0. A) Frequency B) Phase C) Amplitude D) Voltage

Description : _______ describes the position of the waveform relative to time 0. A) Frequency B) Phase C) Amplitude D) Voltage

Last Answer : Phase

In_____ transmission, the frequency of the carrier signal is modulated to follow the changing voltage level (amplitude)of the modulating signal. The peak amplitude and phase of the carrier signal remainconstant,but as the amplitudeof the information signal changes, thefrequency of thecarrier changes correspondingly. A) AM B) PM C) FM D) none of the above

Description : In_____ transmission, the frequency of the carrier signal is modulated to follow the changing voltage level (amplitude)of the modulating signal. The peak amplitude and phase of the carrier signal remainconstant,but as ... of thecarrier changes correspondingly. A) AM B) PM C) FM D) none of the above

Last Answer : FM

The purpose of the _______is to provide flow and error control for the upper-layer protocols that actually demand theseservices A) MAC B) LLC C) LLU D) none of the above

Description : The purpose of the _______is to provide flow and error control for the upper-layer protocols that actually demand theseservices A) MAC B) LLC C) LLU D) none of the above

Last Answer : LLC

A _______is the optical link connecting two neighbor devices. A) section B) line C) path D) none of the above

Description : A _______is the optical link connecting two neighbor devices. A) section B) line C) path D) none of the above

Last Answer : line

In ATM,_______is for short packets. A) AAL1 B) AAL2 C) AAL3/4 D) AAL5

Description : In ATM,_______is for short packets. A) AAL1 B) AAL2 C) AAL3/4 D) AAL5

Last Answer : AAL2

A _______is defined as a small, fixed-size block of information. A) frame B) packet C) cell D) none of the above

Description : A _______is defined as a small, fixed-size block of information. A) frame B) packet C) cell D) none of the above

Last Answer : cell

A _______is an ARP thatacts on behalf of a set of hosts. A) ARP B) RARP C) proxy ARP D) noneof the above

Description : A _______is an ARP thatacts on behalf of a set of hosts. A) ARP B) RARP C) proxy ARP D) noneof the above

Last Answer : proxy ARP

A _______is a data communicationsystem withina building, plant,or campus, orbetween nearby buildings. A) MAN B) LAN C) WAN D) none of the above

Description : A _______is a data communicationsystem withina building, plant,or campus, orbetween nearby buildings. A) MAN B) LAN C) WAN D) none of the above

Last Answer : LAN

In a time-domain plot, the horizontal axis is a measure of ________. A) signal amplitude B) frequency C) phase D) time

Description : In a time-domain plot, the horizontal axis is a measure of ________. A) signal amplitude B) frequency C) phase D) time

Last Answer : time

_________ utilization is the useof availablebandwidthto achieve specificgoals. A) Frequency B) Bandwidth C) Amplitude D) None of the abov

Description : _________ utilization is the useof availablebandwidthto achieve specificgoals. A) Frequency B) Bandwidth C) Amplitude D) None of the abov

Last Answer : Bandwidth

In_______, the peakamplitude of one signal level is 0; the other is thesame as the amplitude of the carrier frequency. A) PSK B) OOK C) FSK D) none of the above

Description : In_______, the peakamplitude of one signal level is 0; the other is thesame as the amplitude of the carrier frequency. A) PSK B) OOK C) FSK D) none of the above

Last Answer : OOK

In________, the phase of thecarrier is varied to represent two or more different signal elements. Both peak amplitude and frequency remain constant. A) ASKB)PSKC)FSKD)QAM

Description : In________, the phase of thecarrier is varied to represent two or more different signal elements. Both peak amplitude and frequency remain constant. A) ASK B) PSK C) FSK D) QAM

Last Answer : PSK

In________, the amplitude of the carrier signal is varied to create signal elements. Both frequency and phase remainconstant. A) ASK B) PSK C) FSK D) QAM

Description : In________, the amplitude of the carrier signal is varied to create signal elements. Both frequency and phase remainconstant. A) ASK B) PSK C) FSK D) QAM

Last Answer : ASK

The _________ product defines the number ofbits that can fill the link. A) bandwidth-period B) frequency-amplitude C) bandwidth-delay D) delay-amplitude

Description : The _________ product defines the number ofbits that can fill the link. A) bandwidth-period B) frequency-amplitude C) bandwidth-delay D) delay-amplitude

Last Answer : bandwidth-delay

The _____of a composite signal is the difference between the highest and the lowest frequencies contained in that signal. A) frequency B) period C) bandwidth D) amplitude

Description : The _____of a composite signal is the difference between the highest and the lowest frequencies contained in that signal. A) frequency B) period C) bandwidth D) amplitude

Last Answer : frequency

In a frequency-domain plot, thehorizontal axis measures the________. A) peak amplitude B) frequency C) phase D) slope

Description : In a frequency-domain plot, thehorizontal axis measures the________. A) peak amplitude B) frequency C) phase D) slope

Last Answer : frequency

Bits can be sent over guided and unguided media as analog signal by ___________ a. digital modulation b. amplitude modulation c. frequency modulation d. phase modulation

Description : Bits can be sent over guided and unguided media as analog signal by ___________ a. digital modulation b. amplitude modulation c. frequency modulation d. phase modulation

Last Answer : a. digital modulation

The absolute value of a signal's highest intensity is called………. A. Peak Amplitude B. Frequency C. Phase D. Both a and c

Description : The absolute value of a signal's highest intensity is called………. A. Peak Amplitude B. Frequency C. Phase D. Both a and c

Last Answer : A. Peak Amplitude

Under normal conditions, the speed of a two-speed squirrel cage induction motor is changed by varying the ____________. A. frequency of the applied voltage B. resistance in the rotor circuit C. number of field poles D. amplitude of the applied voltage

Description : Under normal conditions, the speed of a two-speed squirrel cage induction motor is changed by varying the ____________. A. frequency of the applied voltage B. resistance in the rotor circuit C. number of field poles D. amplitude of the applied voltage

Last Answer : Answer: C

Sinusoids find amplitude, period, frequency, voltage (Problem 1)

Description : Sinusoids find amplitude, period, frequency, voltage (Problem 1)

Last Answer : Sinusoids find amplitude, period, frequency, voltage (Problem 1)

In_____ transmission, thephaseof the carrier signal is modulated to follow the changingvoltage level (amplitude) of the modulating signal. A) AM B) PM C) FM D) none of the above

Description : In_____ transmission, thephaseof the carrier signal is modulated to follow the changingvoltage level (amplitude) of the modulating signal. A) AM B) PM C) FM D) none of the above

Last Answer : PM

In_____ transmission, thecarrier signal is modulated so that its amplitude varies with the changing amplitudes of the modulating signal. A) AM B) PM C) FM D) none of the above

Description : In_____ transmission, thecarrier signal is modulated so that its amplitude varies with the changing amplitudes of the modulating signal. A) AM B) PM C) FM D) none of the above

Last Answer : AM

Quadrature amplitude modulation(QAM) isa combination of ___________. A) ASK and FSK B) ASK and PSK C) PSK and FSK D) none of the above

Description : Quadrature amplitude modulation(QAM) isa combination of ___________. A) ASK and FSK B) ASK and PSK C) PSK and FSK D) none of the above

Last Answer : ASK and PSK

In QAM,both ________ of acarrier frequencyare varied. A) frequencyand amplitude B) phase andfrequency C) amplitudeand phase D) none of the above

Description : In QAM,both ________ of acarrier frequencyare varied. A) frequencyand amplitude B) phase andfrequency C) amplitudeand phase D) none of the above

Last Answer : amplitudeand phase

If the maximum amplitude of a sine wave is 2 V, the minimum amplitude is________ V. A) 2 B) 1 C) -2 D) between -2 and 2

Description : If the maximum amplitude of a sine wave is 2 V, the minimum amplitude is________ V. A) 2 B) 1 C) -2 D) between -2 and 2

Last Answer : -2

_______is suitable as a lubricant for heavy-duty applications of rolling contact bearing. (a) Grease (b) Lubricating oil (c) Graphite (d) Air

Description : _______is suitable as a lubricant for heavy-duty applications of rolling contact bearing. (a) Grease (b) Lubricating oil (c) Graphite (d) Air

Last Answer : (b) Lubricating oil

_______is not as fast as SRAM but is cheaper and is used for main memory. Each bit uses a single capacitor and single transistor circuit.: a) DRAM b) SDRAM c) Both of Above d) None of These

Description : _______is not as fast as SRAM but is cheaper and is used for main memory. Each bit uses a single capacitor and single transistor circuit.: a) DRAM b) SDRAM c) Both of Above d) None of These

Last Answer : a) DRAM

_______is the process of carrying commands: a) Storing b) Executing c) Fetching d) None of These

Description : _______is the process of carrying commands: a) Storing b) Executing c) Fetching d) None of These

Last Answer : b) Executing

_______is a structured programming language used for all purposes such as scientific application, commercial application, developing games etc.a) C b) C++ c) FORTRAN d) None of These

Description : _______is a structured programming language used for all purposes such as scientific application, commercial application, developing games etc. a) C b) C++ c) FORTRAN d) None of These

Last Answer : a) C

_______is the primary motive for a business enterprise. A. Profit. B. Maximize customers. C. Human objective. D. Maximize suppliers.

Description : _______is the primary motive for a business enterprise. A. Profit. B. Maximize customers. C. Human objective. D. Maximize suppliers.

Last Answer : A. Profit.

Which of the following property of sound is affected by change in air temperature – (1) Frequency (2) Intensity (3) Amplitude (4) Wavelength

Description : Which of the following property of sound is affected by change in air temperature – (1) Frequency (2) Intensity (3) Amplitude (4) Wavelength

Last Answer : (4) Wavelength Explanation: The wavelength of sound changes with temperature. This is because the speed of sound changes with the temperature. Since the speed of sound is different at different temperature, this ... while the same tone in fresh water at 68°F would have a wavelength of 48.05 feet.

When a light wave is reflected from a mirror, there is a change in its – (1) frequency (2) amplitude (3) wavelength (4) velocity

Description : When a light wave is reflected from a mirror, there is a change in its – (1) frequency (2) amplitude (3) wavelength (4) velocity

Last Answer : (2) amplitude Explanation: When a light wave is reflected from an object, it changes not only its amplitude but also its phase according to the properties of the object at a particular point. The velocity and momentum are just reversed in another direction.

When the frequency of external exciting force is equal to the natural frequency of the vibration of the system A. The amplitude of vibration is zero B. The amplitude of vibration is significantly small C. The amplitude of vibration is very large D. The amplitude does not change

Description : When the frequency of external exciting force is equal to the natural frequency of the vibration of the system A. The amplitude of vibration is zero B. The amplitude of vibration is significantly small C. The amplitude of vibration is very large D. The amplitude does not change

Last Answer : C. The amplitude of vibration is very large

Which of the following property of sound is affected by change in air temperature (1) Frequency (2) Intensity (3) Amplitude (4) Wavelength

Description : Which of the following property of sound is affected by change in air temperature (1) Frequency (2) Intensity (3) Amplitude (4) Wavelength

Last Answer : Wavelength

When a light wave is reflected from a mirror, there is a change in its (1) frequency (2) amplitude (3) wavelength (4) velocity

Description : When a light wave is reflected from a mirror, there is a change in its (1) frequency (2) amplitude (3) wavelength (4) velocity

Last Answer : amplitude

In respect of OSI model, LANs implement a. lower two layers b. all seven layers c. upper five layers d. None of the above

Description : In respect of OSI model, LANs implement a. lower two layers b. all seven layers c. upper five layers d. None of the above

Last Answer : b. all seven layers

Used for time division multiplexing. A. Frequency modulation B. Pulsed modulation C. SSB D. Amplitude modulation

Description : Used for time division multiplexing. A. Frequency modulation B. Pulsed modulation C. SSB D. Amplitude modulation

Last Answer : B. Pulsed modulation

In FM, frequency of modulated wave varies with A. amplitude B. time C. wavelength D. energy

Description : In FM, frequency of modulated wave varies with A. amplitude B. time C. wavelength D. energy

Last Answer : time

The number of cycles per unit time is called _________ A. Period B. Frequency C. Amplitude D. Wavelength

Description : The number of cycles per unit time is called _________ A. Period B. Frequency C. Amplitude D. Wavelength

Last Answer : B. Frequency

The maximum displacement of a vibrating body on either side of its central position is known as _______________. a)amplitude b)frequency c)time period d)hertz

Description : The maximum displacement of a vibrating body on either side of its central position is known as _______________. a)amplitude b)frequency c)time period d)hertz

Last Answer : a)amplitude

Draw amplitude modulated waveform in time domain and frequency domain with proper labeling.

Description : Draw amplitude modulated waveform in time domain and frequency domain with proper labeling.

Last Answer : AM in Time domain  AM in frequency domain

Define : i) Amplitude ii) Frequency iii) Time period iv) Angular velocity related to a.c.

Description : Define : i) Amplitude ii) Frequency iii) Time period iv) Angular velocity related to a.c.

Last Answer : i) Frequency:  It is the number of cycles completed by an alternating quantity in one second. ii) Time Period:  The time (in sec) required by an alternating quantity to complete its one cycle is known as time period. 

Define: 1) frequency, 2) cycle, 3) time period, 4) amplitude

Description : Define: 1) frequency, 2) cycle, 3) time period, 4) amplitude

Last Answer : 1) frequency: The total number of cycles completed in one second is called frequency. Its unit is cycles per second or Hertz (Hz). Its formula is f = 1/ T, where T is time period. ... is second per cycle. 4) amplitude: the maximum instantaneous value of sine wave is called as amplitude.

The maximum velocity of a body in SHM with amplitude of 150 mm and a frequency 2 vibrations/sec is equal to a.1.885 m/sec b.0.01885 m/sec c.0.1885 m/sec d.18.55 m/sec e.185.5 m/sec

Description : The maximum velocity of a body in SHM with amplitude of 150 mm and a frequency 2 vibrations/sec is equal to a.1.885 m/sec b.0.01885 m/sec c.0.1885 m/sec d.18.55 m/sec e.185.5 m/sec

Last Answer : a. 1.885 m/sec

A body is executing simple harmonic motion of amplitude 1 cm. Its velocitywhile passing through the central point is 10 mm/sec. Its frequency will be a.2.99 rps b.2.22 rps c.1 rps d.1.59 rps e.1.77 rps

Description : A body is executing simple harmonic motion of amplitude 1 cm. Its velocitywhile passing through the central point is 10 mm/sec. Its frequency will be a.2.99 rps b.2.22 rps c.1 rps d.1.59 rps e.1.77 rps

Last Answer : c. 1 rps

How does the energy of a wave depend on its frequency if the amplitude stays constant?

Description : How does the energy of a wave depend on its frequency if the amplitude stays constant?

Last Answer : Feel Free to Answer

What are the relationships that are present between frequency wavelength and amplitude of a wave?

Description : What are the relationships that are present between frequency wavelength and amplitude of a wave?

Last Answer : Need answer

A woman’s voice is shriller than a man’s due to _____? A. Higher Frequency B. Lower frequency C. Higher amplitude D. Weak vocal chords

Description : A woman’s voice is shriller than a man’s due to _____? A. Higher Frequency B. Lower frequency C. Higher amplitude D. Weak vocal chords

Last Answer : ANSWER: A

Of the following properties of a wave, the one that is independent of the other is its (a) Amplitude (b) Velocity (c) Wavelength (d) Frequency

Description : Of the following properties of a wave, the one that is independent of the other is its (a) Amplitude (b) Velocity (c) Wavelength (d) Frequency

Last Answer : Ans:(a)