Description : In________, the amplitude of the carrier signal is varied to create signal elements. Both frequency and phase remainconstant. A) ASK B) PSK C) FSK D) QAM
Last Answer : ASK
Description : In_________, the frequencyof the carrier signal is varied to representdata. Both peak amplitudeand phase remain constant. A) ASK B) PSK C) FSK D) QAM
Last Answer : FSK
Description : Quadrature amplitude modulation(QAM) isa combination of ___________. A) ASK and FSK B) ASK and PSK C) PSK and FSK D) none of the above
Last Answer : ASK and PSK
Description : The sinusoidal carrier is pulsed so that one of the binary states is represented by a carrier while the other is represented by its absence. A. FSK B. ASK C. PSK D. QAM
Last Answer : B. ASK
Description : DMT is a modulation technique that combineselements of _______ and _______. A) FDM; TDM B) QDM; QAM C) FDM; QAM D) PSK; FSK
Last Answer : FDM; QAM
Description : _______ uses twocarriers, onein-phase andthe otherquadrature. A) ASK B) PSK C) FSK D) QAM
Last Answer : QAM
Description : Which of the following is not a digital-to-analogconversion? A) ASK B) PSK C) FSK D) AM
Last Answer : AM
Description : ASK, PSK, FSK,and QAM are examples of________conversion. A) digital-to-digital B) digital-to-analog C) analog-to-analog D) analog-to-digital
Last Answer : digital-to-analog
Description : In_____ transmission, the frequency of the carrier signal is modulated to follow the changing voltage level (amplitude)of the modulating signal. The peak amplitude and phase of the carrier signal remainconstant,but as ... of thecarrier changes correspondingly. A) AM B) PM C) FM D) none of the above
Last Answer : FM
Description : Modulation in which no signal is present between pulses A. Pulse modulation B. QAM C. PSK D. FSK
Last Answer : A. Pulse modulation
Description : In_____ transmission, thephaseof the carrier signal is modulated to follow the changingvoltage level (amplitude) of the modulating signal. A) AM B) PM C) FM D) none of the above
Last Answer : PM
Description : Digital modulation technique used in modems. A. ASK B. PSK C. FSK D. All of these
Last Answer : B. PSK
Description : If the bit rate for an FSK signal is1200 bps, thebaud rate is ________. A) 300 B) 400 C) 600 D) 1200
Last Answer : 1200
Description : IPv6 allows _________ security provisions than IPv4. A) more B) less C) thesame level D) noneof the above
Last Answer : more
Description : A carrier signal has ______. A. Constant peak amplitude B. The information C. Frequency range 20-20000 Hz D. A varying amplitude
Last Answer : A. Constant peak amplitude
Description : A 4 GHz carrier is amplitude modulated by a low-pass signal of maximum cut off frequency 1 MHz. lf this signal is to be ideally sampled, the minimum sampling frequency should be nearly
Last Answer : A 4 GHz carrier is amplitude modulated by a low-pass signal of maximum cut off frequency 1 MHz. lf this signal is to be ideally sampled, the minimum sampling frequency should be nearly 4 Ghz
Description : In________, the phase of thecarrier is varied to represent two or more different signal elements. Both peak amplitude and frequency remain constant. A) ASK B) PSK C) FSK D) QAM
Last Answer : PSK
Description : The _____of a composite signal is the difference between the highest and the lowest frequencies contained in that signal. A) frequency B) period C) bandwidth D) amplitude
Last Answer : frequency
Description : In a time-domain plot, the horizontal axis is a measure of ________. A) signal amplitude B) frequency C) phase D) time
Last Answer : time
Description : Bits can be sent over guided and unguided media as analog signal by ___________ a. digital modulation b. amplitude modulation c. frequency modulation d. phase modulation
Last Answer : a. digital modulation
Description : If digitaldata rateof 9600 bps is encoded using 8-level phaseshift keying (PSK) method, the modulation rate is A. 1200 bands B. 3200 bands C. 4800 bands D. 9600 bands E. None of the above
Last Answer : 3200 bands
Description : The _______ technique uses M different carrier frequencies that are modulated by the source signal. At one moment, the sign modulates one carrier frequency; at the next moment, thesignal modulates another carrier frequency. A) FDM B) DSSS C) FHSS D) TDM
Last Answer : FHSS
Description : Which multiplexing technique shifts each signal to a different carrier frequency? A) FDM B) TDM C) Both (a)and (b) D) None of the above
Last Answer : FDM
Description : Given an AM radio signal with abandwidth of10 KHzand the highest-frequency component at 705 KHz, what is the frequency of the carrier signal? A) 700 KHz B) 705 KHz C) 710 KHz D) Cannot bedetermined from giveninformation
Last Answer : 700 KHz
Description : Carrier is A. One or more conductors that serve as a common connection for a related group of devices B. a continuous frequency capableof being modulated or impressed witha second signal C. ... that provides a data communications service among stations attached tothe network E. None of the above
Last Answer : a continuous frequency capableof being modulated or impressed witha second signa
Description : An IPv4 datagram is fragmented into three smaller datagrams. Which of the following is true? A) Thedo not fragment bit is set to 1 for all three datagrams. B) The more fragment bit ... Theidentification fieldis the same for all three datagrams. D) Theoffset field is thesame for all three datagrams
Last Answer : Theidentification fieldis the same for all three datagrams.
Description : In_______, the sequences aregenerated using orthogonal codes such the Walsh tables. A) FDMA B) TDMA C) CDMA D) none of the above
Last Answer : CDMA
Description : In_______, the stations share thebandwidth of the channel in time. A) FDMA B) TDMA C) CDMA D) none of the above
Last Answer : TDMA
Description : In_______, collisions are avoidedthrough theuse of three strategies: the interframe space, the contention window,and acknowledgments. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)
Last Answer : CSMA/CA
Description : The _______ address in theheader ofa packet in adatagram network normally remains thesame during the entire journeyof the packet. A) source B) destination C) local D) none of the above
Last Answer : destination
Description : In IPv6,____ address defines a groupof computers with addresses that have thesame prefix. A) aunicast B) a multicast C) an anycast D) none of the above
Last Answer : an anycast
Description : The sender is a router thathas receiveda datagram destinedfor a host on thesame network. The logical address that mustbe mapped to a physical address is ______. A) thedestination IP address in the datagram ... IP address of therouter found inthe routing table C) either a or b D) noneof the above
Last Answer : thedestination IP address in the datagram header
Description : In one of the pairs of protocols given below, both the protocols can use multiple TCP connections between the same client and the server. Which one is that? a. HTTP, FTP b. HTTP, TELNET c. FTP, SMTP d. HTTP, SMTP
Last Answer : a. HTTP, FTP
Description : If the percentage modulation of an AM amplifier is 88% and the modulating signal is 1 volt, the carrier has an amplitude of _______________. A. 1.14 volts B. 0.88 volt C. 1.88 volts D. 0.12 volt
Last Answer : A. 1.14 volts
Description : Inan HFC network, the downstream data are modulated using the _______ modulation technique. A) PSK B) QAM C) PCM D) ASK
Description : A 1 Mhz carrier is amplitude modulated by a pure 200-Hz audio test tone. Which of the following combinations of frequencies represent the total content of the AM signal? A. 1 MHz and 200 Hz B. 1 MHz and 1000.2 kHz C. 999.8 kHz, 1000 kHz, and 1000.2 kHz D. 999.8 kHz and 1000.2 kHz
Last Answer : C. 999.8 kHz, 1000 kHz, and 1000.2 kHz
Description : What is the first symbol of a radio signal transmission having an amplitude modulated signal carrier, double side band? A. C B. B C. H D. A
Last Answer : D. A
Description : _______ describes the position of the waveform relative to time 0. A) Frequency B) Phase C) Amplitude D) Voltage
Last Answer : Phase
Description : In_____ transmission, thecarrier signal is modulated so that its amplitude varies with the changing amplitudes of the modulating signal. A) AM B) PM C) FM D) none of the above
Description : The transmission signal coding method of TI carrier is called a. Bipolar b. NRZ c. Manchester d. Binary
Last Answer : Bipolar
Description : This is referred to a product of simultaneous frequency and amplitude modulation or a carrier frequency variation which produces unwanted distortion. A. Absorption modulation B. Simultaneous modulation C. Dynamic instability D. Series modulation
Last Answer : C. Dynamic instability
Description : Variation in amplitude or frequency of carrier wave is called A. amplitude modulation B. frequency modulation C. modulation D. bandwidth
Last Answer : modulation
Description : _________ utilization is the useof availablebandwidthto achieve specificgoals. A) Frequency B) Bandwidth C) Amplitude D) None of the abov
Last Answer : Bandwidth
Description : The _________ product defines the number ofbits that can fill the link. A) bandwidth-period B) frequency-amplitude C) bandwidth-delay D) delay-amplitude
Last Answer : bandwidth-delay
Description : _______is the rateof change with respect totime. A) Amplitude B) Time C) Frequency D) Voltage
Last Answer : Time
Description : In a frequency-domain plot, thehorizontal axis measures the________. A) peak amplitude B) frequency C) phase D) slope
Description : The absolute value of a signal's highest intensity is called………. A. Peak Amplitude B. Frequency C. Phase D. Both a and c
Last Answer : A. Peak Amplitude
Description : What type of transmission is radiated from an aircraft’s radio altimeter antenna? A. An amplitude modulated continuous wave B. A pulse position modulated UHF signal C. A differential phase shift keyed UHF signal D. A frequency modulated continuous wave
Last Answer : D. A frequency modulated continuous wave
Description : Amplitude of modulated wave is in phase with A. output B. system C. frequency D. signal
Last Answer : signal
Description : On oscilloscope screen for dynamic measurement, lissajous diagram is normally used to determine the __________ of the input signal. (A) Frequency (B) Amplitude (C) Damping (D) None of these
Last Answer : (A) Frequency