If digitaldata rateof 9600 bps is encoded using 8-level phaseshift keying (PSK) method, the modulation rate is A. 1200 bands B. 3200 bands C. 4800 bands D. 9600 bands E. None of the above

If digitaldata rateof 9600 bps is encoded using 8-level phaseshift keying (PSK) method, the modulation rate is
A.
1200 bands
B.
3200 bands
C.
4800 bands
D.
9600 bands
E.
None of the above
by

1 Answer

Answer :

3200 bands
by

Related questions

What arethe most commonly used transmission speeds in BPS usedin datacommunication? A. 300 B. 1200 C. 2400 D. 9600 E. None of the above

Description : What arethe most commonly used transmission speeds in BPS usedin datacommunication? A. 300 B. 1200 C. 2400 D. 9600 E. None of the above

Last Answer : 9600

A terminal multiplexer has six 1200 bps terminals and ‘n’ 300 bps terminals connected to it. If the outgoing line is 9600 bps, what is the value of n ? (A) 4 (B) 8 (C) 16 (D) 28

Description : A terminal multiplexer has six 1200 bps terminals and ‘n’ 300 bps terminals connected to it. If the outgoing line is 9600 bps, what is the value of n ? (A) 4 (B) 8 (C) 16 (D) 28

Last Answer : (B) 8

Iridium satellites can provide data communications of up ____ bps data rate. A. 1200 B. 4800 C. 2400 D. 3840

Description : Iridium satellites can provide data communications of up ____ bps data rate. A. 1200 B. 4800 C. 2400 D. 3840

Last Answer : C. 2400

Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is __________. a. 400 bps b. 800 bps c. 1600 bps d. 3200 bps

Description : Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is __________. a. 400 bps b. 800 bps c. 1600 bps d. 3200 bps

Last Answer : d. 3200 bps

How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Last Answer : b. 800

The probability thata singlebit will be inerror on a typical public telephone lineusing 4800 bps modem is 10 to the power -3. If no error detection mechanism is used, the residual error ratefor a communicationline using 9-bit frames is approximately equal to A. 0.003 B. 0.009 C. 0.991 D. 0.999 E. None of the above

Description : The probability thata singlebit will be inerror on a typical public telephone lineusing 4800 bps modem is 10 to the power -3. If no error detection mechanism is used, the residual error ratefor a communicationline using 9-bit frames is ... to A. 0.003 B. 0.009 C. 0.991 D. 0.999 E. None of the above

Last Answer : 0.009

Inan HFC network, the downstream data are modulated using the _______ modulation technique. A) PSK B) QAM C) PCM D) ASK

Description : Inan HFC network, the downstream data are modulated using the _______ modulation technique. A) PSK B) QAM C) PCM D) ASK

Last Answer : QAM

If the bit rate for a16-QAM signal is 4000 bps, what is the baudrate? A) 300 B) 400 C) 1000 D) 1200

Description : If the bit rate for a16-QAM signal is 4000 bps, what is the baudrate? A) 300 B) 400 C) 1000 D) 1200

Last Answer : 1000

If the bit rate for an FSK signal is1200 bps, thebaud rate is ________. A) 300 B) 400 C) 600 D) 1200

Description : If the bit rate for an FSK signal is1200 bps, thebaud rate is ________. A) 300 B) 400 C) 600 D) 1200

Last Answer : 1200

f the bit rate for an ASK signal is1200 bps, thebaud rate is ________. A) 300 B) 400 C) 600 D) 1200

Description : f the bit rate for an ASK signal is1200 bps, thebaud rate is ________. A) 300 B) 400 C) 600 D) 1200

Last Answer : 1200

Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is ............... (A) 400 bps (B) 800 bps (C) 1600 bps (D) 3200 bps

Description : Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is ............... (A) 400 bps (B) 800 bps (C) 1600 bps (D) 3200 bps

Last Answer : (D) 3200 bps Answer: D Explanation: The multiplexer is shown in the Figure. Each frame carries 1 byte from each channel; the size of each frame, therefore, is 4 bytes, or 32 bits. Because each ... channel, the frame rate must be 100 frames per second. The bit rate is 100 32 = 3200 bps. 

Usually, it takes10-bits to represent one character. How many characters can betransmittedat a speed of 1200 BPS? A. 10 B. 12 C. 120 D. 1200 E. None of the above

Description : Usually, it takes10-bits to represent one character. How many characters can betransmittedat a speed of 1200 BPS? A. 10 B. 12 C. 120 D. 1200 E. None of the above

Last Answer : 120

DMT is a modulation technique that combineselements of _______ and _______. A) FDM; TDM B) QDM; QAM C) FDM; QAM D) PSK; FSK

Description : DMT is a modulation technique that combineselements of _______ and _______. A) FDM; TDM B) QDM; QAM C) FDM; QAM D) PSK; FSK

Last Answer : FDM; QAM

Quadrature amplitude modulation(QAM) isa combination of ___________. A) ASK and FSK B) ASK and PSK C) PSK and FSK D) none of the above

Description : Quadrature amplitude modulation(QAM) isa combination of ___________. A) ASK and FSK B) ASK and PSK C) PSK and FSK D) none of the above

Last Answer : ASK and PSK

Explain the speed of 9600 bps . ?

Description : Explain the speed of 9600 bps . ?

Last Answer : 9600 bps Speed ​​is the voice band. 9600 bps means 9600 bits of data is transferred per second . Voice bands typically transfer data up to 9600 bps . This bandwidth is used in telephone lines. This bandwidth is also used to transfer data to computers and peripheral devices.

_______is the rateof change with respect totime. A) Amplitude B) Time C) Frequency D) Voltage

Description : _______is the rateof change with respect totime. A) Amplitude B) Time C) Frequency D) Voltage

Last Answer : Time

How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Last Answer : b. 12,000 bytes

In_______, the peakamplitude of one signal level is 0; the other is thesame as the amplitude of the carrier frequency. A) PSK B) OOK C) FSK D) none of the above

Description : In_______, the peakamplitude of one signal level is 0; the other is thesame as the amplitude of the carrier frequency. A) PSK B) OOK C) FSK D) none of the above

Last Answer : OOK

_______ conversionis the process of changing one of the characteristics ofan analog signal basedon the informationin the digitaldata. A) Digital-to-analog B) Analog-to-analog C) Analog-to-digital D) Digital-to-digital

Description : _______ conversionis the process of changing one of the characteristics ofan analog signal basedon the informationin the digitaldata. A) Digital-to-analog B) Analog-to-analog C) Analog-to-digital D) Digital-to-digital

Last Answer : Digital-to-analog

The most common technique to change an analog signal to digitaldata is called __________. A) PAL B) PCM C) sampling D) none of the abov

Description : The most common technique to change an analog signal to digitaldata is called __________. A) PAL B) PCM C) sampling D) none of the abov

Last Answer : PCM

________ is the process of converting digitaldata to adigital signal. A) Block coding B) Line coding C) Scrambling D) None of the above

Description : ________ is the process of converting digitaldata to adigital signal. A) Block coding B) Line coding C) Scrambling D) None of the above

Last Answer : Line coding

If span is 150 mts and sag is 10 ft of a cable carrying a load of 3200 kg per horizontal metre then tension of ends is a.104,000 kg b.107 dynes c.1200,000 kg d.932,000 kg e.584,000 kg

Description : If span is 150 mts and sag is 10 ft of a cable carrying a load of 3200 kg per horizontal metre then tension of ends is a.104,000 kg b.107 dynes c.1200,000 kg d.932,000 kg e.584,000 kg

Last Answer : d. 932,000 kg

Total zinc content of human body is about (A) 800 mg (B) 1200 mg (C) 2000 mg (D) 3200 mg

Description : Total zinc content of human body is about (A) 800 mg (B) 1200 mg (C) 2000 mg (D) 3200 mg

Last Answer : Answer : C

The cutter bar of a tractor operated mower ordinarily makes: A. 800-1200 strokes/min B. 1600-2000 strokes/min C. 2400-2800 strokes/min D. 3200-3600 strokes/min

Description : The cutter bar of a tractor operated mower ordinarily makes: A. 800-1200 strokes/min B. 1600-2000 strokes/min C. 2400-2800 strokes/min D. 3200-3600 strokes/min

Last Answer : A. 800-1200 strokes/min

Modulation in which no signal is present between pulses A. Pulse modulation B. QAM C. PSK D. FSK

Description : Modulation in which no signal is present between pulses A. Pulse modulation B. QAM C. PSK D. FSK

Last Answer : A. Pulse modulation

Digital modulation technique used in modems. A. ASK B. PSK C. FSK D. All of these

Description : Digital modulation technique used in modems. A. ASK B. PSK C. FSK D. All of these

Last Answer : B. PSK

The modulation technique used by GSM cellular system A. Phase shift keying B. Frequency shift keying C. Gaussian minimum shift keying D. QAM

Description : The modulation technique used by GSM cellular system A. Phase shift keying B. Frequency shift keying C. Gaussian minimum shift keying D. QAM

Last Answer : C. Gaussian minimum shift keying

ECE Board Exam March 1996 The modulation system used for telegraphy is A. frequency-shift keying B. two-tone modulation C. pulse-code modulation D. single-tone modulation

Description : ECE Board Exam March 1996 The modulation system used for telegraphy is A. frequency-shift keying B. two-tone modulation C. pulse-code modulation D. single-tone modulation

Last Answer : A. frequency-shift keying

Phase-shift keying is similar to what other two types of modulation?

Description : Phase-shift keying is similar to what other two types of modulation?

Last Answer : Cw and frequency-shift keying.

Describe amplitude shift keying (ASK) modulation with suitable circuit diagram.

Description : Describe amplitude shift keying (ASK) modulation with suitable circuit diagram.

Last Answer : Explanation:- ASK MODULATOR: The process where a binary information signal directly modulates the amplitude of an analog carrier. The digital signal is used to switch the carrier between amplitude levels is ... Block diagram of ASK Transmitter / ASK modulator:-  Waveforms:- 

If the baudrate is400 for a QPSK signal, thebit rate is ________ bps. A) 100 B) 400 C) 800 D) 1600

Description : If the baudrate is400 for a QPSK signal, thebit rate is ________ bps. A) 100 B) 400 C) 800 D) 1600

Last Answer : 800

A device is sending out data at the rate of 2000 bps. How long does it take to send a file of 1,00,000 characters ? a. 50 b. 200 c. 400 d. 800

Description : A device is sending out data at the rate of 2000 bps. How long does it take to send a file of 1,00,000 characters ? a. 50 b. 200 c. 400 d. 800

Last Answer : c. 400

In the MIME header field, ____describes how the object within the body was encoded in order that it be included in the message using a mail-safe form. a. content-type b. content-transfer-encoding c. content-description d. content-id

Description : In the MIME header field, ____describes how the object within the body was encoded in order that it be included in the message using a mail-safe form. a. content-type b. content-transfer-encoding c. content-description d. content-id

Last Answer : b. content-transfer-encoding

_______ uses twocarriers, onein-phase andthe otherquadrature. A) ASK B) PSK C) FSK D) QAM

Description : _______ uses twocarriers, onein-phase andthe otherquadrature. A) ASK B) PSK C) FSK D) QAM

Last Answer : QAM

In_________, the frequencyof the carrier signal is varied to representdata. Both peak amplitudeand phase remain constant. A) ASK B) PSK C) FSK D) QAM

Description : In_________, the frequencyof the carrier signal is varied to representdata. Both peak amplitudeand phase remain constant. A) ASK B) PSK C) FSK D) QAM

Last Answer : FSK

In________, the amplitude of the carrier signal is varied to create signal elements. Both frequency and phase remainconstant. A) ASK B) PSK C) FSK D) QAM

Description : In________, the amplitude of the carrier signal is varied to create signal elements. Both frequency and phase remainconstant. A) ASK B) PSK C) FSK D) QAM

Last Answer : ASK

Which of the following is not a digital-to-analogconversion? A) ASK B) PSK C) FSK D) AM

Description : Which of the following is not a digital-to-analogconversion? A) ASK B) PSK C) FSK D) AM

Last Answer : AM

ASK, PSK, FSK,and QAM are examples of________conversion. A) digital-to-digital B) digital-to-analog C) analog-to-analog D) analog-to-digital

Description : ASK, PSK, FSK,and QAM are examples of________conversion. A) digital-to-digital B) digital-to-analog C) analog-to-analog D) analog-to-digital

Last Answer : digital-to-analog

The primary advantage of key-to-tape data entry system is a. A large percentage of editing can be performed at the time of data entry b. Key verification is easily performed c. The tape is reusable d. Keying errors can be detected as they occur

Description : The primary advantage of key-to-tape data entry system is a. A large percentage of editing can be performed at the time of data entry b. Key verification is easily performed c. The tape is reusable d. Keying errors can be detected as they occur

Last Answer : The tape is reusable

A tank can be filled by an inlet tap at the rate of 8 litres per minute. A leak in the bottom of a tank can empty the full tank in 16 hours. When the tank is full, the inlet is opened and due to the leak, the tank is empty in 80 hours. How many litres does the tank hold? A) 8000 litre B) 9560 litre C) 8525 litre D) 9600 litre

Description : A tank can be filled by an inlet tap at the rate of 8 litres per minute. A leak in the bottom of a tank can empty the full tank in 16 hours. When the tank is full, the inlet is opened and due to ... hours. How many litres does the tank hold? A) 8000 litre B) 9560 litre C) 8525 litre D) 9600 litre

Last Answer : D Part emptied by the leak in 1 hour = 1/16 part filled by (leak & inlet open) in 1 hour = 1/80 Part filled by the inlet tap in 1 hour = 1/16 – 1/80 = 1/20 Inlet tap fills the tank in = 20 hours Inlet tap fills water at the rate of 8 litres a minute. Capacity of tank = 20 * 60 * 8= 9600 litre

If delaysare recorded as 10 bit numbers in a 50 router network, and delay vectorsare exchanged twicea second,how muchbandwidth per fill duplex line is occupied by the distributedrouting algorithm? A. 500 bps B. 1500 bps C. 5 bps D. 1000 bps

Description : If delaysare recorded as 10 bit numbers in a 50 router network, and delay vectorsare exchanged twicea second,how muchbandwidth per fill duplex line is occupied by the distributedrouting algorithm? A. 500 bps B. 1500 bps C. 5 bps D. 1000 bps

Last Answer : 1000 bps

In a token ring network the transmission speed is 10^7 bps and the propagation speed is 200 metres/micro second. The 1- bit delay in this network is equivalent to: a. 500 metres of cable. b. 200 metres of cable. c. 20 metres of cable. d. 50 metres of cable

Description : In a token ring network the transmission speed is 10^7 bps and the propagation speed is 200 metres/micro second. The 1- bit delay in this network is equivalent to: a. 500 metres of cable. b. 200 metres of cable. c. 20 metres of cable. d. 50 metres of cable

Last Answer : c. 20 metres of cable.

A DMA controller transfers 32-bit words to memory using cycle Stealing. The words are assembled from a device that transmits characters at a rate of 4800 characters per second. The CPU is fetching and executing instructions at an average rate of one million instructions per second. By how much will the CPU be slowed down because of the DMA transfer? (A) 0.06% (B) 0.12% (C) 1.2% (D) 2.5%

Description : A DMA controller transfers 32-bit words to memory using cycle Stealing. The words are assembled from a device that transmits characters at a rate of 4800 characters per second. The CPU is fetching and executing instructions at an average ... of the DMA transfer? (A) 0.06% (B) 0.12% (C) 1.2% (D) 2.5%

Last Answer : Answer: B

In a boiler enthalpy of water supplied was 2000 kJ/kg. Enthalpy being added by fuel combustion is 3200 kJ/kg. Using first law of thermodynamics, find amount of heat supplied if steam generation rate is 10 tons per hour.

Description : In a boiler enthalpy of water supplied was 2000 kJ/kg. Enthalpy being added by fuel combustion is 3200 kJ/kg. Using first law of thermodynamics, find amount of heat supplied if steam generation rate is 10 tons per hour.

Last Answer : Heat supplied Q = m (h2-h1) …….(Steady flow energy equation for boiler) ; h2=3200 KJ/kg h1=2000 KJ/kg m = 10 Tons /hour = (10 x 1000)/3600 kg/sec = 2.77 Kg/sec Q = 2.77(3200-2000) = 3324 KJ/sec heat supplied for 10 Tons/hr steam generation

Inan HFC network, the upstream data are modulated using the _______ modulation technique. A) QAM B) QPSK C) PCM D) ASK

Description : Inan HFC network, the upstream data are modulated using the _______ modulation technique. A) QAM B) QPSK C) PCM D) ASK

Last Answer : QPSK

Ashwin borrowed a sum of Rs.6, 300 from Mishra at the rate of 14% for 3 years. He then added some more money to the borrowed sum and lent it to Ramesh at the rate of 16% of simple interest for the same time. If Ashwin gained Rs.618/- in the whole transaction, then what sum did he lend to Ramesh? a) Rs.6600 b) Rs.6800 c) Rs.4800 d) Rs.9800 e) Rs.8500

Description : Ashwin borrowed a sum of Rs.6, 300 from Mishra at the rate of 14% for 3 years. He then added some more money to the borrowed sum and lent it to Ramesh at the rate of 16% of simple interest for the same time. If ... sum did he lend to Ramesh? a) Rs.6600 b) Rs.6800 c) Rs.4800 d) Rs.9800 e) Rs.8500

Last Answer : Suppose Ashwin lend Rs. x to Ramesh then, Xx16x3/100 - (X – 6300) × 14 × 3/100 = 618......(1) From equation I , x = Rs. 6800 Answer: b)

State the method used to increase the speed of keying in a cw transmitter.

Description : State the method used to increase the speed of keying in a cw transmitter.

Last Answer : Machine keying.

12 voice channels are sampled at 8000 sampling rate and encoded into 8 bit PCM word. Determine the rate of the data stream. a. 354 kbps b. 750 kbps c. 768 kbps d. 640 kbps

Description : 12 voice channels are sampled at 8000 sampling rate and encoded into 8 bit PCM word. Determine the rate of the data stream. a. 354 kbps b. 750 kbps c. 768 kbps d. 640 kbps

Last Answer : c. 768 kbps

ECE Board Exam March 1996 What is the transmission rate of a system for transmitting the output of a microcomputer to a line printer operating at a speed of 30 lines/minute? Assume that the line printer has 8 bits of data per character and prints out 80 characters/line. A. 800 bps B. 400 bps C. 320 bps D. 640 bps

Description : ECE Board Exam March 1996 What is the transmission rate of a system for transmitting the output of a microcomputer to a line printer operating at a speed of 30 lines/minute? Assume that the line printer has 8 bits ... and prints out 80 characters/line. A. 800 bps B. 400 bps C. 320 bps D. 640 bps

Last Answer : C. 320 bps

For the 16-PSK and a transmission system with a 10kHz bandwidth, determine the maximum bit rate

Description : For the 16-PSK and a transmission system with a 10kHz bandwidth, determine the maximum bit rate

Last Answer : 40,000 bps