Description : In a time-domain plot, the horizontal axis is a measure of ________. A) signal amplitude B) frequency C) phase D) time
Last Answer : time
Description : In_____ transmission, the frequency of the carrier signal is modulated to follow the changing voltage level (amplitude)of the modulating signal. The peak amplitude and phase of the carrier signal remainconstant,but as ... of thecarrier changes correspondingly. A) AM B) PM C) FM D) none of the above
Last Answer : FM
Description : In________, the phase of thecarrier is varied to represent two or more different signal elements. Both peak amplitude and frequency remain constant. A) ASK B) PSK C) FSK D) QAM
Last Answer : PSK
Description : The absolute value of a signal's highest intensity is called………. A. Peak Amplitude B. Frequency C. Phase D. Both a and c
Last Answer : A. Peak Amplitude
Description : Circuit switching takes place at the________ layer. A) data line B) physical C) network D) transport
Last Answer : physical
Description : In________, the amplitude of the carrier signal is varied to create signal elements. Both frequency and phase remainconstant. A) ASK B) PSK C) FSK D) QAM
Last Answer : ASK
Description : _______ describes the position of the waveform relative to time 0. A) Frequency B) Phase C) Amplitude D) Voltage
Last Answer : Phase
Description : Bits can be sent over guided and unguided media as analog signal by ___________ a. digital modulation b. amplitude modulation c. frequency modulation d. phase modulation
Last Answer : a. digital modulation
Description : Pick up the correct statement from the following: (A) Hydrograph is a plot of discharge and time (B) In hydrographs, time is plotted on X-axis (C) The maximum flow in the river due to rainfall, is called peak flow (D) All the above
Last Answer : Answer: Option D
Description : A carrier signal has ______. A. Constant peak amplitude B. The information C. Frequency range 20-20000 Hz D. A varying amplitude
Last Answer : A. Constant peak amplitude
Description : In above numerical what will be the frequency corresponding to the peak amplitude A 14.18rad/sec B 24.13rad/sec C 20.22rad/sec D 22.32rad/sec
Last Answer : A 14.18rad/sec
Description : If frequency of excitation of a forced vibration system with negligible damping is very close to natural frequency of the system, then the system will A) Execute harmonic motion of large amplitude B) Beat with a very high peak amplitude C) Perform aperiodic motion D) None of the above
Last Answer : A) Execute harmonic motion of large amplitude
Description : If ωmax is the frequency at which the peak amplitude occurs and ωn is the natural frequency of the system then In a forced vibration system with damping, the higher the damping, A) More will be ... and ωmax is independent of damping in this system D) The difference between ωn and ωmax will be zero
Last Answer : A) More will be the difference between ωn and ωmax
Description : If the input signals are 180 degrees out of phase with each other, what will be the peak-to-peak amplitude of the output signals?
Last Answer : Each output signal will be 100 millivolts.
Description : If the input signals are in phase, what will be the peak-to peak amplitude of the output signals?
Last Answer : 0 volts (the input signals will "cancel out").
Description : Draw amplitude modulated waveform in time domain and frequency domain with proper labeling.
Last Answer : AM in Time domain AM in frequency domain
Description : _________ utilization is the useof availablebandwidthto achieve specificgoals. A) Frequency B) Bandwidth C) Amplitude D) None of the abov
Last Answer : Bandwidth
Description : In_______, the peakamplitude of one signal level is 0; the other is thesame as the amplitude of the carrier frequency. A) PSK B) OOK C) FSK D) none of the above
Last Answer : OOK
Description : The _________ product defines the number ofbits that can fill the link. A) bandwidth-period B) frequency-amplitude C) bandwidth-delay D) delay-amplitude
Last Answer : bandwidth-delay
Description : The _____of a composite signal is the difference between the highest and the lowest frequencies contained in that signal. A) frequency B) period C) bandwidth D) amplitude
Last Answer : frequency
Description : _______is the rateof change with respect totime. A) Amplitude B) Time C) Frequency D) Voltage
Last Answer : Time
Description : In QAM,both ________ of acarrier frequencyare varied. A) frequencyand amplitude B) phase andfrequency C) amplitudeand phase D) none of the above
Last Answer : amplitudeand phase
Description : In_________, the frequencyof the carrier signal is varied to representdata. Both peak amplitudeand phase remain constant. A) ASK B) PSK C) FSK D) QAM
Last Answer : FSK
Description : Once the logic of a network is laid out, the project manager will conduct a forward pass and a backward pass through the network. This will provide information regarding ______ and will identify ... C. Resource shortages, high risk activities D. The high risk activities, non-critical path
Last Answer : A. The total duration of the project, critical path
Description : Cnidarian toxins are secreted by the________ cell. a. Pseudocysts b. Nematocysts c. Hydrocysts d. Gonadocytes
Last Answer : b. Nematocysts
Description : If Ф = angle(G(jw)H(jw)) where w is the gain crossover frequency of Bode plot of the system, phase margin is A) -180+ Ф B) 180- Ф C) 180+ Ф D) -180- Ф
Last Answer : Ans:Option C
Description : The unit circle of the Nyquist plot transforms into unity or 0 dB line of the amplitude plot of the Bode diagram for
Last Answer : The unit circle of the Nyquist plot transforms into unity or 0 dB line of the amplitude plot of the Bode diagram for all frequencies
Description : In a Laser (say neon laser) all the atoms emit the light waves of – (1) Same frequency (2) Same amplitude (3) Same phase (4) All of the above
Last Answer : (4) All of the above Explanation: In a Laser all the atoms emit the light waves of same frequency, amplitude and phase. A laser is a device that emits light (electromagnetic radiation) ... photons. The term "laser" originated as an acronym for Light Amplification by Stimulated Emission of Radiation.
Description : What type of transmission is radiated from an aircraft’s radio altimeter antenna? A. An amplitude modulated continuous wave B. A pulse position modulated UHF signal C. A differential phase shift keyed UHF signal D. A frequency modulated continuous wave
Last Answer : D. A frequency modulated continuous wave
Description : Amplitude of modulated wave is in phase with A. output B. system C. frequency D. signal
Last Answer : signal
Description : Standing waves are formed when two sets of waves of equal amplitude and frequency w) are in phase x) are in opposite phase y) move through each other in opposite directions z) are reflected from the same surface
Last Answer : ANSWER: Y -- MOVE THROUGH EACH OTHER IN OPPOSITE DIRECTIONS
Description : In a Laser (say neon laser) all the atoms emit the light waves of (1) Same frequency (2) Same amplitude (3) Same phase (4) All of the above
Last Answer : All of the above
Description : Highest point on AC graph is known as A. peak value B. amplitude C. frequency D. wave front
Last Answer : peak value
Description : Amplitude or peak value
Last Answer : Amplitude or peak value: The maximum value reached by a waveform.
Description : What is amplitude value or peak value?
Last Answer : It is the maximum value of an alternating quantity that can be obtained in any one direction.
Description : If the single-input, differential-output, differential amplifier has an output signal taken between the two output terminals, what will the peak-to-peak amplitude of this combined output be?
Last Answer : 200 millivolts. A-18. a. Differential amplifier
Description : If x gram of gas is adsobed by m gram of adsorbent at pressure P the plot of log `(x)/(m)` versus log P is linear .the slope of the plot is : (n and k
Last Answer : If x gram of gas is adsobed by m gram of adsorbent at pressure P the plot of log `(x)/(m)` versus log P is linear ... 2 k` B. log k C. n D. `(1)/(n)`
Description : Adsorption of a gas on a surface follows Freundlich adsorption isotherm. Plot of `"log " (x)/(m)` versus log P gives a straight line with slope equal
Last Answer : Adsorption of a gas on a surface follows Freundlich adsorption isotherm. Plot of `"log " (x ... of pressure. D. Adsorption is independent of pressure.
Description : For the free settling of a spherical particle through a fluid, the slope of, CD-log NRe , plot is (A) 1 (B) -1 (C) 0.5 (D) -0.5
Last Answer : (B) -1
Description : From Arrhenius law, a plot of loge K versus 1/T gives a straight line with a slope of (-E/R). The unit of E/R is (A) k cal (B) k cal/°K (C) °K (D) k cal. °K
Last Answer : (C) °K
Description : Pick out the wrong statement. (A) Visible radiation provides the necessary activation energy in photochemical reactions (B) The order and molecularity of a complex reaction may not be the same (C) For ... rate constant (k) (D) Molecularity of the reaction is always a whole number greater than zero
Last Answer : (B) The order and molecularity of a complex reaction may not be the same
Description : Following the six-tenth factor rule, if a log-log plot of capacity of the equipment vs. cost of the equipment is made, then a straight line is obtained, whose slope is equal to (A) 0.1 (B) 0.6 (C) 0.2 (D) 0.8
Last Answer : (B) 0.6
Description : A constellation diagram shows us the __________ of a signal element, particularly when we areusing twocarriers (one in-phase and one quadrature). A) amplitudeand phase B) amplitudeand frequency C) frequencyand phase D) none of the above
Description : A sine wave in the ______domain can be representedby onesingle spikein the _____domain. A) time; frequency B) frequency; time C) time; phase D) phase; time
Last Answer : time; frequency
Description : In_____ transmission, thephaseof the carrier signal is modulated to follow the changingvoltage level (amplitude) of the modulating signal. A) AM B) PM C) FM D) none of the above
Last Answer : PM
Description : In_____ transmission, thecarrier signal is modulated so that its amplitude varies with the changing amplitudes of the modulating signal. A) AM B) PM C) FM D) none of the above
Last Answer : AM
Description : Quadrature amplitude modulation(QAM) isa combination of ___________. A) ASK and FSK B) ASK and PSK C) PSK and FSK D) none of the above
Last Answer : ASK and PSK
Description : If the maximum amplitude of a sine wave is 2 V, the minimum amplitude is________ V. A) 2 B) 1 C) -2 D) between -2 and 2
Last Answer : -2
Description : Which of the following term best described the overload distortion? A. Peak limiting B. Quantization noise C. Granular noise D. Slope distortion
Last Answer : A. Peak limiting
Description : _______ is more prevalent in analog signals that have steep slopes or whose amplitudes vary rapidly. A. Peak limiting B. Quantization noise C. Granular noise D. Slope overload
Last Answer : D. Slope overload