Description : The _______ technique uses M different carrier frequencies that are modulated by the source signal. At one moment, the sign modulates one carrier frequency; at the next moment, thesignal modulates another carrier frequency. A) FDM B) DSSS C) FHSS D) TDM
Last Answer : FHSS
Description : _____ isa digital multiplexing technique for combiningseveral low-ratechannels into onehigh-rate one. A) FDM B) TDM C) WDM D) None of the above
Last Answer : TDM
Description : _____ isan analog multiplexing technique to combine optical signals. A) FDM B) TDM C) WDM D) None of the above
Last Answer : WDM
Description : Which multiplexing technique involves signals composed of light beams? A) FDM B) TDM C) WDM D) none of the above
Description : Which multiplexing technique transmits digital signals? A) FDM B) TDM C) WDM D) None of the above
Description : Which multiplexing technique transmits analog signals? A) FDM B) TDM C) WDM D) (a) and (c)
Last Answer : (a) and (c)
Description : The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM
Last Answer : DSSS
Description : Which of the following is oldest multiplexing scheme? A. Frequency Division Multiplexing (FDM) B. Time Division Multiplexing (TDM) C. Code Division Multiplexing (CDM) D. Space Division Multiplexing (SDM)
Last Answer : D. Space Division Multiplexing (SDM)
Description : DMT is a modulation technique that combineselements of _______ and _______. A) FDM; TDM B) QDM; QAM C) FDM; QAM D) PSK; FSK
Last Answer : FDM; QAM
Description : An ______signal is the optical modulation of an STS-n (or STM-n) signal. A) OC-n B) TDM-n C) FDM-n D) none of the above
Last Answer : TDM-n
Description : Multiplexing scheme use by baseband transmission. A. FDM B. Space multiplexing C. TDM D. Statistical multiplexing
Last Answer : C. TDM
Description : Time synchronization is necessary in (A) FDM. (B) TDM. (C) WDM. (D) Quadrature multiplexing
Last Answer : (B) TDM.
Description : Given the following statements: (a) Frequency Division Multiplexing is a technique that can be applied when the bandwidth of a link is greater than combined bandwidth of signals to be transmitted. (b) Wavelength Division Multiplexing (WDM) ... c) is true. (D) (a), (b) and (d) are true; (c) is false.
Last Answer : (D) (a), (b) and (d) are true; (c) is false.
Description : We candivide ____ into two different schemes: synchronousor statistical. A) FDM B) TDM C) WDM D) none of the above
Description : _____ isa digitalprocess that allows several connections to share thehighbandwidth ofa link. A) FDM B) TDM C) WDM D) None of the above
Description : ____ is designed to use thehigh bandwidthcapabilityof fiber-optic cable. A) FDM B) TDM C) WDM D) None of the above
Description : An FDM hierarchy which is formed by frequency – division multiplexing five groups containing 12 channels each for a combined bandwidth of 240 kHz
Last Answer : Supergroup
Description : One of the reasons why FDM is being replaced by TDM is A. noise is amplified with voice when an FDM system is used B. it is difficult to place channels side by side C. there is more time than frequency D. Most available frequencies has been used
Last Answer : A. noise is amplified with voice when an FDM system is used
Description : A good example of a pilot tone system used in commercial frequency modulation stations. A. FDM B. Time division C. Stereo multiplexing D. Frequency modulation
Last Answer : C. Stereo multiplexing
Description : FDM stands for: a) Frequency Division Multiplexing b) Fidelty Division Multiplexing c) Fast Division Multiplexing d) None of These
Last Answer : a) Frequency Division Multiplexing
Description : An FDM hierarchy which is formed by frequency – division multiplexing 10 super groups together for a combined capacity of 600 voice band message channels.
Last Answer : Mastergroup
Description : In________, the amplitude of the carrier signal is varied to create signal elements. Both frequency and phase remainconstant. A) ASK B) PSK C) FSK D) QAM
Last Answer : ASK
Description : In radio signal emission designation, the fifth symbol means A. Details of signals B. Type of information transmitted C. Nature of multiplexing D. Nature of signal modulating the main carrier
Last Answer : C. Nature of multiplexing
Description : In synchronous TDM, forn signal sources of the same data rate, eachframe contains _______ slots. A) n B) n + 1 C) n- 1 D) 0to n
Last Answer : n
Description : Using_________each connected device is assigned a time slot whether or not the device has any thing to send. (A) WDM (B) FDM (C) TDM (D) STDM
Last Answer : (C) TDM
Description : Compare FDM & TDM systems
Last Answer : Sr. No. FDM TDM 1 Divides the channel into the two or more frequency ranges that do not overlap. Divides and allocates certain Time periods to each channel. 2 Code word is ... Needs guard bands Needs guard time 4 Problem of crosstalk No problem of crosstalk
Description : TDM stands for: a) Task Division Multiplexing b) Time Division Multiplexing c) Testing Division Multiplexing d) None of These
Last Answer : b) Time Division Multiplexing
Description : In_______, the peakamplitude of one signal level is 0; the other is thesame as the amplitude of the carrier frequency. A) PSK B) OOK C) FSK D) none of the above
Last Answer : OOK
Description : In_____ transmission, the frequency of the carrier signal is modulated to follow the changing voltage level (amplitude)of the modulating signal. The peak amplitude and phase of the carrier signal remainconstant,but as ... of thecarrier changes correspondingly. A) AM B) PM C) FM D) none of the above
Last Answer : FM
Description : Given an AM radio signal with abandwidth of10 KHzand the highest-frequency component at 705 KHz, what is the frequency of the carrier signal? A) 700 KHz B) 705 KHz C) 710 KHz D) Cannot bedetermined from giveninformation
Last Answer : 700 KHz
Description : Carrier is A. One or more conductors that serve as a common connection for a related group of devices B. a continuous frequency capableof being modulated or impressed witha second signal C. ... that provides a data communications service among stations attached tothe network E. None of the above
Last Answer : a continuous frequency capableof being modulated or impressed witha second signa
Description : In ________ TDM, each input connection hasan allotment in the outputeven if it is not sendingdata. A) synchronous B) statistical C) isochronous D) none of the above
Last Answer : synchronous
Description : Four channels are multiplexed using TDM. If each channel sends 100 bytes/second and we multiplex 1 byte per channel, then the bit rate for the link is __________. a. 400 bps b. 800 bps c. 1600 bps d. 3200 bps
Last Answer : d. 3200 bps
Description : If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ______. a. 64 Kbps b. 32 Mbps c. 32 Kbps d. 64 MbpS
Last Answer : c. 32 Kbps
Description : In_________, the frequencyof the carrier signal is varied to representdata. Both peak amplitudeand phase remain constant. A) ASK B) PSK C) FSK D) QAM
Last Answer : FSK
Description : ________ is a typeof transmission impairment in which the signal loses strength due to the different propagation speeds of each frequency that makes up the signal. A) Attenuation B) Distortion C) Noise D) Decibel
Last Answer : Distortion
Description : The transmission signal coding method of TI carrier is called a. Bipolar b. NRZ c. Manchester d. Binary
Last Answer : Bipolar
Description : In_____ transmission, thephaseof the carrier signal is modulated to follow the changingvoltage level (amplitude) of the modulating signal. A) AM B) PM C) FM D) none of the above
Last Answer : PM
Description : In the North American TDM system, what is the transmission rate in Mbps of T3 carrier system? A. 44.736 B. 6.312 C. 3.152 D. 274.176
Last Answer : A. 44.736
Description : Describe North American (T-carrier) digital multiplexing hierarchy with neat diagram.
Last Answer : Explanation:- T1 Carrier System T1 carrier systems were designed to combine PCM and TDM Techniques for the Transmission of 24 64Kbps channels with each channel Capable of Carrying ... 8064 64Kbps voice or data channels and transmit them at 560.16Mbps over a single coaxial cable.
Description : In________, the phase of thecarrier is varied to represent two or more different signal elements. Both peak amplitude and frequency remain constant. A) ASK B) PSK C) FSK D) QAM
Last Answer : PSK
Description : In ________ TDM, slots are dynamically allocated to improvebandwidth efficiency. A) synchronous B) statistical C) isochronous D) none of the above
Last Answer : statistical
Description : In TDM, the transmissionrate of the multiplexed path isusually_______ thesum of thetransmission rates of thesignal sources. A) greater than B) less than C) equal to D) not related to
Last Answer : greater than
Description : SONET is a _______ TDM system. A) asynchronous B) synchronous C) statistical D) none of the above
Last Answer : none of the above
Description : _______ is designed to be usedin wirelessapplications in which stations must be ableto sharethe medium without interception by an eavesdropperand without beingsubject tojamming from a malicious intruder. A) Spread spectrum B) Multiplexing C) Modulation D) None of the above
Last Answer : Spread spectrum
Description : ________is the set of techniques that allows the simultaneous transmission of multiple signalsacrossa single data link. A) Demodulating B) Multiplexing C) Compressing D) None of the above
Last Answer : Multiplexing
Description : ________ can beachievedbyusing multiplexing; ______ canbe achieved by using spreading. A) Efficiency; privacy and antijamming B) Privacyand antijamming;efficiency C) Privacyand efficiency; antijamming D) Efficiency and antijamming; privacy
Last Answer : Efficiency; privacy and antijammin
Description : The sharing of a medium and its link by two or more devices is called _______. A) modulation B) encoding C) line discipline D) multiplexing
Last Answer : multiplexing
Description : In ATM, the ______ layerprovides routing, traffic management, switching, and multiplexing services. A) physical B) ATM C) AAL D) none of the above
Last Answer : ATM
Description : Modulation is theprocessof A. converting analogsignals todigital signals B. converting digital signals toanalog signals C. Multiplexing various signals intohigh speed line signals D. performing data encryption
Last Answer : converting digital signals toanalog signals