Description : In ATM, the _______layeraccepts transmissions from upper-layer servicesand maps them into ATM cells. A) physical B) ATM C) AAL D) none of the above
Last Answer : AAL
Description : In ATM, the ______ layerprovides routing, traffic management, switching, and multiplexing services. A) physical B) ATM C) AAL D) none of the above
Last Answer : ATM
Description : The physical layer provides __________ a. mechanical specifications of electrical connectors and cables b. electrical specification of transmission line signal level c. specification for IR over optical fiber d. all of the mentioned
Last Answer : d. all of the mentioned
Description : The physical layer provides __________ A. mechanical specifications of electrical connectors and cables B. electrical specification of transmission line signal level C. specification for IR over optical fiber D. all of the mentioned
Last Answer : D. all of the mentioned
Description : What specifications does physical layer provides __________. A. mechanical specifications of electrical connectors and cables B. electrical specification of transmission line signal level C. specification for IR over optical fiber D. all of the mentioned
Description : The physical layer provides __________ a) mechanical specifications of electrical connectors and cables b) electrical specification of transmission line signal level c) specification for IR over optical fiber d) all of the mentioned
Last Answer : d) all of the mentioned
Description : What kind of transmission medium is most appropriate to carry data in a computer network that is exposed to electrical interferences? a) Unshielded twisted pair b) Optical fiber c) Coaxial cable d) Microwave
Last Answer : b) Optical fiber
Description : _____ encoding has a transition at the beginning of each 0 bit. A) RZ B) Manchester C) Differential Manchester D) All the above
Last Answer : Differential Manchester
Description : _____ encoding has a transition at the middle of each bit. A) RZ B) Manchester C) Differential Manchester D) All the above
Last Answer : All the above
Description : The layer that transmits data in the form of bit streams using electrical and mechanicalsystems is in the OSI model. a. Physical layer b. Transport Layer c. Network Layer d. Data Link Layer
Last Answer : a. Physical layer
Description : In TDM, the transmissionrate of the multiplexed path isusually_______ thesum of thetransmission rates of thesignal sources. A) greater than B) less than C) equal to D) not related to
Last Answer : greater than
Description : What is the main function of Session layer in OSI model? a. Defines how data is formatted between the devices b. Made physical connection between server and client c. Both a and b d. None of the above
Last Answer : a. Defines how data is formatted between the devices
Description : Which transmission media provides the highest transmission speed in a network? a. coaxial cable b. twisted pair cable c. optical fiber d. electrical cable
Last Answer : c. optical fiber
Description : Which transmission media provides the highest transmission speed in a network? a) coaxial cable b) twisted pair cable c) optical fiber d) electrical cable
Last Answer : c) optical fiber
Description : In Manchester anddifferential Manchester encoding, the transition at the middle of the bit is usedfor __________. A) bit transfer B) baud transfer C) synchronization D) none of the above
Last Answer : synchronization
Description : In Ethernet when Manchester encoding is used, the bit rate is: a. Half the baud rate. b. Twice the baud rate. c. Same as the baud rate. d. None of the above
Last Answer : a. Half the baud rate.
Description : The sharing of a medium and its link by two or more devices is called _______. A) modulation B) encoding C) line discipline D) multiplexing
Last Answer : multiplexing
Description : The _____layer defines the electrical and physical specifications for devices: a) Data Link Layer b) Presentation Layer c) Physical Layer d) None of These
Last Answer : c) Physical Layer
Description : The physical layer is concerned with ___________ a. bit-by-bit delivery b. process to process delivery c. application to application delivery d. port to port delivery
Last Answer : a. bit-by-bit delivery
Description : The physical layer is concerned with ___________ A. bit-by-bit delivery B. process to process delivery C. application to application delivery D. port to port delivery
Last Answer : A. bit-by-bit delivery
Description : The physical layer is concerned with ___________ a) bit-by-bit delivery p) process to process delivery c) application to application delivery d) port to port delivery
Last Answer : a) bit-by-bit delivery
Description : In ATM,______ is for constant-bit-ratedata. A) AAL1 B) AAL2 C) AAL3/4 D) AAL5
Last Answer : AAL1
Description : The physical layer is concerned with the movement of _______ over the physical medium. A. programs B. dialogs C. protocols D. Bits
Last Answer : D. Bits
Description : The ________ rate defines thenumber of dataelements sent in1s; the______ rate is the numberof signalelements sent in 1s. A) data; signal B) signal; data C) baud; bit D) none of the above
Last Answer : data; signal
Description : For a ______ channel, the Nyquist bit rate formula defines thetheoretical maximum bit rate. A) noisy B) noiseless C) bandpass D) low-pass
Last Answer : noiseless
Description : Transmission media lie below the_______ layer. A) physical B) network C) transport D) application
Last Answer : physical
Description : The _______ layer ensures reliable transmission on a single link A. network B. physical C. data link D. transport
Last Answer : C. data link
Description : The data link layer takes the packets from _________ and encapsulates them into frames for transmission. a) network layer b) physical layer c) transport layer d) application layer
Last Answer : a) network layer
Description : Rate of change of a signal on a transmission medium after encoding and modulation have occurred
Last Answer : baud rate
Description : A(n) _____ medium provides a physical conduit from one device to another. A) guided B) unguided C) either (a)or (b) D) none of the above
Last Answer : guided
Description : Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control) c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above
Last Answer : d. All the above
Description : IEEE 802.3ab defines Gigabit Ethernet transmission over unshielded twisted pair (UTP) category 5, 5e or 6 cabling known as .................... a. 1000 BASE-T b. 1000 BASE-SX c. 1000 BASE-LX d. 1000 BASE-CX
Last Answer : a. 1000 BASE-T
Description : Application layer protocol defines ____ a.types of messages exchanged b.message format, syntax and semantics c.rules for when and how processes send and respond to messages d.all of the mentioned
Last Answer : d.all of the mentioned
Description : The _______ layer ensures interoperability between communicating devices through transformation of data into a mutually agreed upon format. a. network b. presentation c. transport d. data link
Last Answer : b. presentation
Description : The physical layer is responsible for _____ a) line coding b) channel coding c) modulation d) all of the mentioned
Description : In ATM,_____ is for conventionalpacket switching(virtual-circuit approachor datagram approach). A) AAL1 B) AAL2 C) AAL3/4 D) AAL5
Last Answer : AAL3/4
Description : In Frame Relay, the EA field defines thenumber of bytes; it is _____ in the last byte of the address. A) 0 B) 1 C) 2 D) 3
Last Answer : 1
Description : Identify the non suitable medium for 802.3 ethernet? a. A thin coaxial cable b. A twisted pair cable c. A microwave link d. A fiber optical cable
Last Answer : c. A microwave link
Description : Which of the following cannot be used as a medium for 802.3 ethernet? a) A thin coaxial cable b) A twisted pair cable c) A microwave link d) A fiber optical cable
Last Answer : c) A microwave link
Description : Hard disk is coated in both side above a. Magnetic metallic oxide b. Optical metallic oxide c. Carbon layer d. All of the above
Last Answer : Magnetic metallic oxide
Description : The ______ layer is responsible for the movementof a signal from its optical source to its optical destination. A) section B) line C) path D) photonic
Last Answer : line
Description : _____ isan analog multiplexing technique to combine optical signals. A) FDM B) TDM C) WDM D) None of the above
Last Answer : WDM
Description : In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above
Last Answer : asynchronous
Description : the maximum window size for data transmission using the selective reject protocol with n-bit frame sequence numbers is: a. 2^n b. 2^(n-1) c. 2^n – 1 d. 2^(n-2)
Last Answer : b. 2^(n-1)
Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200
Last Answer : b. 800
Description : In a token ring network the transmission speed is 10^7 bps and the propagation speed is 200 metres/micro second. The 1- bit delay in this network is equivalent to: a. 500 metres of cable. b. 200 metres of cable. c. 20 metres of cable. d. 50 metres of cable
Last Answer : c. 20 metres of cable.
Description : Standard Ethernet (10-Mbps) uses_______ encoding A) NRZ B) AMI C) Manchester D) differential Manchester
Last Answer : Manchester
Description : Which encoding method uses alternating positive and negative values for1s? A) NRZ-I B) RZ C) Manchester D) AMI
Last Answer : AMI
Description : Which of the following encoding methods does not provide for synchronization? A) NRZ-L B) RZ C) NRZ-I D) Manchester
Last Answer : NRZ-L
Description : Unipolar, bipolar, and polar encoding are typesof _______ encoding. A) line B) block C) NRZ D) Manchester