When making a blind transmission you should: a. Transmit the message twice b. Transmit each word twice c. Repeat the message on 121.5 MHz d. Wait for visual signals

When making a blind transmission you should:
a. Transmit the message twice
b. Transmit each word twice
c. Repeat the message on 121.5 MHz
d. Wait for visual signals
by

1 Answer

Answer :

a. Transmit the message twice
by

Related questions

When making a blind transmission you should: a. Transmit the message twice b. Transmit each word twice c. Repeat the message on 121.5 MHz d. Wait for visual signals

Description : When making a blind transmission you should: a. Transmit the message twice b. Transmit each word twice c. Repeat the message on 121.5 MHz d. Wait for visual signals

Last Answer : a. Transmit the message twice

. If you are repeating a word or a message for clarity then you should use the phrase: a. WORDS TWICE b. I REPEAT c. I SAY AGAIN d. DITTO

Description : . If you are repeating a word or a message for clarity then you should use the phrase: a. WORDS TWICE b. I REPEAT c. I SAY AGAIN d. DITTO

Last Answer : c. I SAY AGAIN

If you are unable to contact a station on a designated frequency you should: a. Try another appropriate frequency b. Start transmitting blind c. Land at the nearest suitable aerodrome d. Transmit words twice

Description : If you are unable to contact a station on a designated frequency you should: a. Try another appropriate frequency b. Start transmitting blind c. Land at the nearest suitable aerodrome d. Transmit words twice

Last Answer : a. Try another appropriate frequency

The definition of the phrase “STANDBY” is: a. Consider the transmission as not sent b. Proceed with your message c. Wait and I will call you d. Hold your present position

Description : The definition of the phrase “STANDBY” is: a. Consider the transmission as not sent b. Proceed with your message c. Wait and I will call you d. Hold your present position

Last Answer : c. Wait and I will call you

When making a blind transmission you should:

Description : When making a blind transmission you should:

Last Answer : transmit the message twice

When asking for a repeat of a message, you should say:

Description : When asking for a repeat of a message, you should say:

Last Answer : SAY AGAIN

The response to general call from ATC is for the aircraft to: a. Respond in alphabetic order b. Respond in numerical order c. Give no response d. Request a repeat of the message

Description : The response to general call from ATC is for the aircraft to: a. Respond in alphabetic order b. Respond in numerical order c. Give no response d. Request a repeat of the message

Last Answer : c. Give no response

The definition of the instruction “MONITORO” is: a. Listen out on frequency b. Establish communications on frequency c. Watch out for visual signals on frequency d. You are being watched

Description : The definition of the instruction “MONITORO” is: a. Listen out on frequency b. Establish communications on frequency c. Watch out for visual signals on frequency d. You are being watched

Last Answer : a. Listen out on frequency

When an aircraft subjected to unlawful interference has landed in a Contracting State, it shall notify by the most expeditious means of the State of Registry and the State of the Operator of the landing and, in addition, shall similarly transmit all other relevant information to: a. Each State whose citizens suffered fatalities or injuries, each State whose citizens were detained as hostages, each State whose citizens were known to be on board and ICAO b. ICAO only c. Each State whose citizens were known to be on board only d. ICAO and each State whose citizens were known to be on board only

Description : When an aircraft subjected to unlawful interference has landed in a Contracting State, it shall notify by the most expeditious means of the State of Registry and the State of the Operator of the landing and, ... be on board only d. ICAO and each State whose citizens were known to be on board only

Last Answer : a. Each State whose citizens suffered fatalities or injuries, each State whose citizens were detained as hostages, each State whose citizens were known to be on board and ICAO

The term “CORRECTION” is used when: a. The readback of a message is incorrect b. The readback of a message is correct c. The message has to be deleted d. An error has been made in the transmission and the correct version isH..

Description : The term “CORRECTION” is used when: a. The readback of a message is incorrect b. The readback of a message is correct c. The message has to be deleted d. An error has been made in the transmission and the correct version isH..

Last Answer : d. An error has been made in the transmission and the correct version isH..

What is the optimum length for a half-wave aerial that requires to transmit and receive 1 MHz signals?

Description : What is the optimum length for a half-wave aerial that requires to transmit and receive 1 MHz signals?

Last Answer : An aerial length of 750 metres is required

If you are repeating a word or a message for clarity then you should use the phrase: a. WORDS TWICE b. I REPEAT c. I SAY AGAIN d. DITTO

Description : If you are repeating a word or a message for clarity then you should use the phrase: a. WORDS TWICE b. I REPEAT c. I SAY AGAIN d. DITTO

Last Answer : c. I SAY AGAIN

If you are unable to contact a station on a designated frequency you should: a. Try another appropriate frequency b. Start transmitting blind c. Land at the nearest suitable aerodrome d. Transmit words twice

Description : If you are unable to contact a station on a designated frequency you should: a. Try another appropriate frequency b. Start transmitting blind c. Land at the nearest suitable aerodrome d. Transmit words twice

Last Answer : a. Try another appropriate frequency

The full range of VHF frequencies used for communications is: a. 3 to 30 MHz b. 88 to 108 MHz c. 108.0 to 139.95 MHz d. 118.0 to 136.975 MHz

Description : The full range of VHF frequencies used for communications is: a. 3 to 30 MHz b. 88 to 108 MHz c. 108.0 to 139.95 MHz d. 118.0 to 136.975 MHz

Last Answer : d. 118.0 to 136.975 MHz

Which provision can resolve / overcome the shortcomings associated with duplication or failure condition of Stop and Wait Automatic Repeat Request protocol especially due to loss of data frames or non reception of acknowledgement? a. Provision of sequence number in the header of message b. Provision of checksum computation c. Both a & b d. None of the above

Description : Which provision can resolve / overcome the shortcomings associated with duplication or failure condition of Stop and Wait Automatic Repeat Request protocol especially due to loss of data frames or non reception ... message b. Provision of checksum computation c. Both a & b d. None of the above

Last Answer : Provision of sequence number in the header of message

What visual technique should be used when searching for an aircraft

Description : What visual technique should be used when searching for an aircraft

Last Answer : pinpoint 10 deg segments of the sky and confirmed before passing onto another

What visual technique should be used when searching for an aircraft? a. Sweep from side to side with the eyes covering the whole field of vision b. Search the sky portion by portion starting on the left c. Pinpoint 10° segments of the sky and confirm before passing onto another d. Use a succession of small and rapid eye movements

Description : What visual technique should be used when searching for an aircraft? a. Sweep from side to side with the eyes covering the whole field of vision b. Search the sky portion by portion starting ... the sky and confirm before passing onto another d. Use a succession of small and rapid eye movements

Last Answer : c. Pinpoint 10° segments of the sky and confirm before passing onto another

What visual technique should be used when searching for an aircraft? a. Sweep from side to side with the eyes covering the whole field of vision b. Search the sky portion by portion starting on the left c. Pinpoint 10° segments of the sky and confirm before passing onto another d. Use a succession of small and rapid eye movements

Description : What visual technique should be used when searching for an aircraft? a. Sweep from side to side with the eyes covering the whole field of vision b. Search the sky portion by portion starting ... the sky and confirm before passing onto another d. Use a succession of small and rapid eye movements

Last Answer : c. Pinpoint 10° segments of the sky and confirm before passing onto another

An aircraft flying in the visual circuit at an aerodrome sees a series of red flashes from the control tower. What does this mean? a. Do not land b. Do not land because the aerodrome is unusable c. Give way to other aircraft d. Return for landing and await clearance to land

Description : An aircraft flying in the visual circuit at an aerodrome sees a series of red flashes from the control tower. What does this mean? a. Do not land b. Do not land because the aerodrome is unusable c. Give way to other aircraft d. Return for landing and await clearance to land

Last Answer : b. Do not land because the aerodrome is unusable

An aircraft is allowed to descend below the MSA if: a. The pilot follows the published approach procedures b. The aircraft receives radar vectors c. The pilot has visual contact with the runway and surrounding terrain and is able to maintain visual contact d. All of the above

Description : An aircraft is allowed to descend below the MSA if: a. The pilot follows the published approach procedures b. The aircraft receives radar vectors c. The pilot has visual contact with the runway and surrounding terrain and is able to maintain visual contact d. All of the above

Last Answer : d. All of the above

The best signals for VHF communications are obtained when the position of the aircraft is at :

Description : The best signals for VHF communications are obtained when the position of the aircraft is at :

Last Answer : high altitude and in the vicinity of the aerodrome

An FM receiver whose intermediate frequency is 10.7 MHz, is experiencing image channel interference from a station transmitting on 121.1 MHz. If the local oscillator is tracking above, the receiver is tuned to A. 131.8 MHz B. 110.4 MHz C. 142.5 MHz D. 99.7 MHz

Description : An FM receiver whose intermediate frequency is 10.7 MHz, is experiencing image channel interference from a station transmitting on 121.1 MHz. If the local oscillator is tracking above, the receiver is tuned to A. 131.8 MHz B. 110.4 MHz C. 142.5 MHz D. 99.7 MHz

Last Answer : D. 99.7 MHz

Modulation means A. Varying of information B. Utilization of a single transmission channel to carry multiple signals C. Varying of some parameters of a carrier such as its amplitude to transmit information D. Transmit pulses in DC form on a copper wire

Description : Modulation means A. Varying of information B. Utilization of a single transmission channel to carry multiple signals C. Varying of some parameters of a carrier such as its amplitude to transmit information D. Transmit pulses in DC form on a copper wire

Last Answer : C. Varying of some parameters of a carrier such as its amplitude to transmit information

The message “READABILITY 3’’ means

Description : The message “READABILITY 3’’ means

Last Answer : readable but with diffuculty

The priority of the message “LINE UP”is

Description : The priority of the message “LINE UP”is

Last Answer : same as “TAXI TO HOLDING POINT RUNWAY 20”

The message “CHECK” to an aircraft means that you would:

Description : The message “CHECK” to an aircraft means that you would:

Last Answer : examine a system or procedure

An urgency message should include the following information:

Description : An urgency message should include the following information:

Last Answer : name of station addressed, aircraft callsign, nature of urgency condition, intention of commander, position, level, heading

Your reply to the message “REPORT FLIGHT CONDITONS” should be

Description : Your reply to the message “REPORT FLIGHT CONDITONS” should be

Last Answer : VMC/IMC

The phrase used to separate portions of a message is:

Description : The phrase used to separate portions of a message is:

Last Answer : break

. The priority of the message “LINE UP” is: a. Greater than “REQUEST QDM” b. Less than “CLEAR TO LAND” c. Same as “TAXI TO HOLDING POINT RUNWAY 20” d. Same as “WORK IN PROGRESS ON TAXIWAY

Description : . The priority of the message “LINE UP” is: a. Greater than “REQUEST QDM” b. Less than “CLEAR TO LAND” c. Same as “TAXI TO HOLDING POINT RUNWAY 20” d. Same as “WORK IN PROGRESS ON TAXIWAY

Last Answer : c. Same as “TAXI TO HOLDING POINT RUNWAY 20

The message “READABILITY 3” means: a. Readable now and then b. Unreadable c. Readable d. Readable but with difficulty

Description : The message “READABILITY 3” means: a. Readable now and then b. Unreadable c. Readable d. Readable but with difficulty

Last Answer : d. Readable but with difficulty

The minimum content of a readback of the message from ATC “X-CD CHANGE FREQUENCY TO STEPHENVILLE TOWER 118.7” is: a. 118.7 b. CHANGING FREQUENCY X-CD c. TO STEPHENVILLE X-CD d. 118.7 X-CD

Description : The minimum content of a readback of the message from ATC “X-CD CHANGE FREQUENCY TO STEPHENVILLE TOWER 118.7” is: a. 118.7 b. CHANGING FREQUENCY X-CD c. TO STEPHENVILLE X-CD d. 118.7 X-CD

Last Answer : d. 118.7 X-CD

An urgency message should include the following information: a. Name of station addressed, aircraft callsign, nature of urgency condition, intention of commander, position, level, heading b. Callsign, position, route, destination, endurance c. Name of station addressed, callsign, present positin, level, ETA destination d. Captain’s number, rank and name

Description : An urgency message should include the following information: a. Name of station addressed, aircraft callsign, nature of urgency condition, intention of commander, position, level, heading b. Callsign, ... , callsign, present positin, level, ETA destination d. Captain's number, rank and name

Last Answer : a. Name of station addressed, aircraft callsign, nature of urgency condition, intention of commander, position, level, heading

The phrase used to separate portions of a message is: a. BREAK BREAK b. I SAY AGAIN c. BREAK d. UMM

Description : The phrase used to separate portions of a message is: a. BREAK BREAK b. I SAY AGAIN c. BREAK d. UMM

Last Answer : c. BREAK

The ATC message “DISTRESS TRAFFIC ENDED” signifies that: a. All traffic are to end their transmissions b. All aircraft on the frequency are to change to another frequency c. Normal ATC is resumed after an emergency d. ATC is shutting shop

Description : The ATC message “DISTRESS TRAFFIC ENDED” signifies that: a. All traffic are to end their transmissions b. All aircraft on the frequency are to change to another frequency c. Normal ATC is resumed after an emergency d. ATC is shutting shop

Last Answer : c. Normal ATC is resumed after an emergency

Your reply to the message “REPORT FLIGHT CONDITIONS” should be: a. VFR/IFR b. SMOOTH/TURBULENT c. NOT BAD/SO SO d. VMC/IMC

Description : Your reply to the message “REPORT FLIGHT CONDITIONS” should be: a. VFR/IFR b. SMOOTH/TURBULENT c. NOT BAD/SO SO d. VMC/IMC

Last Answer : d. VMC/IMC

The message “CHECK” to an aircraft means that you should: a. Confirm that you received and understood the last message b. Pass the required information to ATC c. Stay where you are d. Examine a system or procedure

Description : The message “CHECK” to an aircraft means that you should: a. Confirm that you received and understood the last message b. Pass the required information to ATC c. Stay where you are d. Examine a system or procedure

Last Answer : d. Examine a system or procedure

A DISTRESS message differs from an URGENCY message because: a. There is grave and imminent danger which requires immediate assistance b. The aeroplane has suffered damage that endangers the ability to fly c. The aeroplane will not be able to reach a suitable aerodrome d. The situation concerns the safety of passengers on board or within sight

Description : A DISTRESS message differs from an URGENCY message because: a. There is grave and imminent danger which requires immediate assistance b. The aeroplane has suffered damage that endangers the ability ... suitable aerodrome d. The situation concerns the safety of passengers on board or within sight

Last Answer : a. There is grave and imminent danger which requires immediate assistance

A pilot can improve the probability of detecting other aircrafts by: a. Minimizing the duration of eye rests and making as many eye movements as possible b. Moving the head frequently to alter the apparent motion of any distant object c. Maximizing the time spent looking in each sector to allow the maximum chance of detecting movement d. Maintaining as far as possible a lookout ahead of the aircraft and relying on peripheral vision to detect any movement from the side

Description : A pilot can improve the probability of detecting other aircrafts by: a. Minimizing the duration of eye rests and making as many eye movements as possible b. Moving the head frequently to ... lookout ahead of the aircraft and relying on peripheral vision to detect any movement from the side

Last Answer : a. Minimizing the duration of eye rests and making as many eye movements as possible

Readability 2 means that your transmission is:

Description : Readability 2 means that your transmission is:

Last Answer : readable now and then

Readability 2 means that your transmission is: a. Readable but with difficulty b. Readable c. Readable now and then d. Two way communications have been established

Description : Readability 2 means that your transmission is: a. Readable but with difficulty b. Readable c. Readable now and then d. Two way communications have been established

Last Answer : c. Readable now and then

Which of the following systems uses frequency band 870-885 MHz as a transmit band of its base station? A. TACS B. NTT C. NMT D. AMPS

Description : Which of the following systems uses frequency band 870-885 MHz as a transmit band of its base station? A. TACS B. NTT C. NMT D. AMPS

Last Answer : B. NTT

The definition of the phrase “STANDBY” is: a. Consider the transmission as not sent b. Proceed with your message c. Wait and I will call you d. Hold your present position

Description : The definition of the phrase “STANDBY” is: a. Consider the transmission as not sent b. Proceed with your message c. Wait and I will call you d. Hold your present position

Last Answer : c. Wait and I will call you

Decision making in emergency situations requires primarily

Description : Decision making in emergency situations requires primarily

Last Answer : the distribution of tasks in crew coordination

What should a captain do before making a non urgent decision

Description : What should a captain do before making a non urgent decision

Last Answer : encourage ideas from the crew before stating his own opinion

In a packet switching network, if the message size is 48 bytes and each packet contains a header of 3 bytes. If 24 packets are required to transmit the message, the packet size is ................ (1) 2 bytes (2) 1 byte (3) 4 bytes (4) 5 bytes

Description : In a packet switching network, if the message size is 48 bytes and each packet contains a header of 3 bytes. If 24 packets are required to transmit the message, the packet size is ................ (1) 2 bytes (2) 1 byte (3) 4 bytes (4) 5 bytes

Last Answer : (4) 5 bytes 

How far is the visual carrier from the lowest frequency in the spectrum of a monochrome TV broadcast channel following the NTSC standard? A. 1.5 MHz B. 1.25 MHz C. 4.5 MHz D. 0.25 MHz

Description : How far is the visual carrier from the lowest frequency in the spectrum of a monochrome TV broadcast channel following the NTSC standard? A. 1.5 MHz B. 1.25 MHz C. 4.5 MHz D. 0.25 MHz

Last Answer : B. 1.25 MHz

Inthe _________ protocol weavoid unnecessary transmissionby sending only frames that are corrupted. A) Stop-and-Wait ARQ B) Go-Back-N ARQ C) Selective-Repeat ARQ D) none of the above

Description : Inthe _________ protocol weavoid unnecessary transmissionby sending only frames that are corrupted. A) Stop-and-Wait ARQ B) Go-Back-N ARQ C) Selective-Repeat ARQ D) none of the above

Last Answer : Selective-Repeat ARQ

Inthe _________Protocol, ifno acknowledgment for aframe has arrived, we resend all outstanding frames. A) Stop-and-Wait ARQ B) Go-Back-N ARQ C) Selective-Repeat ARQ D) none of the above

Description : Inthe _________Protocol, ifno acknowledgment for aframe has arrived, we resend all outstanding frames. A) Stop-and-Wait ARQ B) Go-Back-N ARQ C) Selective-Repeat ARQ D) none of the above

Last Answer : Go-Back-N ARQ

The _________Protocol, addsa simple error control mechanism to the _______Protocol. A) Stop-and-Wait ARQ; Stop-and-Wait B) Go-Back-N ARQ; Stop-and-Wait C) Selective Repeat ARQ; Go-Back-N ARQ D) none of the above

Description : The _________Protocol, addsa simple error control mechanism to the _______Protocol. A) Stop-and-Wait ARQ; Stop-and-Wait B) Go-Back-N ARQ; Stop-and-Wait C) Selective Repeat ARQ; Go-Back-N ARQ D) none of the above

Last Answer : Go-Back-N ARQ; Stop-and-Wait