Thegroundwave eventuallydisappears, as onemoves awayfromthetransmitter, because of a. interference from the sky wave b. loss of line-of-sight conditions c. maximumsingle-hop distance limitation d. tilting

Thegroundwave eventuallydisappears, as onemoves awayfromthetransmitter, because of a. interference from the sky wave
b. loss of line-of-sight conditions
c. maximumsingle-hop distance limitation
d. tilting
by

1 Answer

Answer :

d. tilting
by

Related questions

Distancesnearthe skip distance should beused forthe sky-wave propagation a. to avoid tilting b.topreventsky-wave andupper rayinterference c. to avoid the Faraday effect d. so as nor to exceed the critical frequency

Description : Distancesnearthe skip distance should beused forthe sky-wave propagation a. to avoid tilting b.topreventsky-wave andupper rayinterference c. to avoid the Faraday effect d. so as nor to exceed the critical frequency

Last Answer : b.topreventsky-wave andupper rayinterference

Which of the following phenomena provides a convincing proof for wave nature of radiation a) Reflection b) Refraction c) Polarization d) Interference and diffraction

Description : Which of the following phenomena provides a convincing proof for wave nature of radiation a) Reflection b) Refraction c) Polarization d) Interference and diffraction

Last Answer : d) Interference and diffraction

ECE Board Exam March 1996 When the transmitting and receiving antennas are in line-of-sight of each other, the mode of propagation is ________ wave. A. space or direct B. ground C. surface D. sky

Description : ECE Board Exam March 1996 When the transmitting and receiving antennas are in line-of-sight of each other, the mode of propagation is ________ wave. A. space or direct B. ground C. surface D. sky

Last Answer : A. space or direct

The claddingwhichsurroundsthe fiber core a. is used to reduce optical interference b. is used to protect the fiber c. acts to help guide the light in the core d. ensures that the refractive index remains constant

Description : The claddingwhichsurroundsthe fiber core a. is used to reduce optical interference b. is used to protect the fiber c. acts to help guide the light in the core d. ensures that the refractive index remains constant

Last Answer : c. acts to help guide the light in the core

Distance traveled by a wave in the time of one cycle. A. Hop B. Frequency C. Wavelength D. Crest

Description : Distance traveled by a wave in the time of one cycle. A. Hop B. Frequency C. Wavelength D. Crest

Last Answer : C. Wavelength

To couple a coaxialline toa parallel-wire line,itisbesttouse a a. slotted line b.balun c. directional coupler d. quarter-wave transformer

Description : To couple a coaxialline toa parallel-wire line,itisbesttouse a a. slotted line b.balun c. directional coupler d. quarter-wave transformer

Last Answer : b.balun

Impedance inversionmaybe obtainedwith a. a short-circuited stub b. an open-circuited stub c. a quarter-wave line d. a half-wave line

Description : Impedance inversionmaybe obtainedwith a. a short-circuited stub b. an open-circuited stub c. a quarter-wave line d. a half-wave line

Last Answer : c. a quarter-wave line

Desired tension in an open belt drive system can be maintained (without changing center to center distance between two pulley)by using A)ldler pulley. B)slide rail C) Tilting angle. D)none of the above

Description : Desired tension in an open belt drive system can be maintained (without changing center to center distance between two pulley)by using A)ldler pulley. B)slide rail C) Tilting angle. D)none of the above

Last Answer : A)ldler pulley

FrequenciesintheUHFrange normallypropagate bymeans of a. ground waves b. sky waves c. surface waves d.spacewaves

Description : FrequenciesintheUHFrange normallypropagate bymeans of a. ground waves b. sky waves c. surface waves d.spacewaves

Last Answer : d.spacewaves

The effects of tooth removal in healthy individuals can show as, A. Loss of contacts B. Slight tilting C. Pocket formation (in 2nd mandibular. Molar after 3rd molar horizontal impacted removal) D. TMJ problem E. All of the above

Description : The effects of tooth removal in healthy individuals can show as, A. Loss of contacts B. Slight tilting C. Pocket formation (in 2nd mandibular. Molar after 3rd molar horizontal impacted removal) D. TMJ problem E. All of the above

Last Answer : E. All of the above

Signals with a frequency above30 MHz use_______propagation. A) ground B) sky C) line-of-sight D) none of the above

Description : Signals with a frequency above30 MHz use_______propagation. A) ground B) sky C) line-of-sight D) none of the above

Last Answer : line-of-sight

Signals with a frequency between 2 MHz and 30 MHz use ______ propagation. A) ground B) sky C) line-of-sight D) none of the above

Description : Signals with a frequency between 2 MHz and 30 MHz use ______ propagation. A) ground B) sky C) line-of-sight D) none of the above

Last Answer : sky

Signals with a frequency below 2 MHz use _______ propagation. A) ground B) sky C) line-of-sight D) none of the above

Description : Signals with a frequency below 2 MHz use _______ propagation. A) ground B) sky C) line-of-sight D) none of the above

Last Answer : ground

The VLF and LF bauds use .............. propagation for communication. (A) Ground (B) Sky (C) Line of sight (D) Space

Description : The VLF and LF bauds use .............. propagation for communication. (A) Ground (B) Sky (C) Line of sight (D) Space

Last Answer : Answer: A Explanation: VLF (Very Low Frequency) LF (Low Frequency) In general there are three type of propagation.1.Ground Propagation 2.Sky propagation 3.Line-of-sight propagation ... portion of the atmosphere. These low-frequency signals travel in all directions from the transmitting antenna.

The two conductors of a transmission line carry equal current I in opposite directions. The force on each conductor is (a) proportional to 7 (b) proportional to X (c) proportional to distance between the conductors (d) inversely proportional to I

Description : The two conductors of a transmission line carry equal current I in opposite directions. The force on each conductor is (a) proportional to 7 (b) proportional to X (c) proportional to distance between the conductors (d) inversely proportional to I

Last Answer : (b) proportional to X

The standard reference antenna forthe directive gain isthe a. infinitesimal dipole b. isotropic antenna c. elementary doublet d. half-wave dipole

Description : The standard reference antenna forthe directive gain isthe a. infinitesimal dipole b. isotropic antenna c. elementary doublet d. half-wave dipole

Last Answer : b. isotropic antenna

The wavelength of the wave associated with the moving object is a) Directly proportional to the accelerating voltage b) Directly proportional to the square of accelerating voltage c) Inversely proportional to the square root of accelerating voltage d) Inversely proportional to the accelerating voltage

Description : The wavelength of the wave associated with the moving object is a) Directly proportional to the accelerating voltage b) Directly proportional to the square of accelerating voltage c) ... proportional to the square root of accelerating voltage d) Inversely proportional to the accelerating voltage

Last Answer : c) Inversely proportional to the square root of accelerating voltage

The output from a full wave rectifier is (a) A pulsating uni-directional current (b) A DC voltage (c) Zero (d) An AC voltage

Description : The output from a full wave rectifier is (a) A pulsating uni-directional current (b) A DC voltage (c) Zero (d) An AC voltage

Last Answer : a) A pulsating uni-directional current

In a half wave rectifier the rms value of AC component of the waves (a) Zero (b) Equal to DC value (c) More than DC value (d) Less than DC value

Description : In a half wave rectifier the rms value of AC component of the waves (a) Zero (b) Equal to DC value (c) More than DC value (d) Less than DC value

Last Answer : b) Equal to DC value

Short-circuited stubs are preferred to open-circuited stubs because thelatter are a. more difficult to make an connect b. made of a transmission line with a different characteristic impedance c. liable to radiate

Description : Short-circuited stubs are preferred to open-circuited stubs because thelatter are a. more difficult to make an connect b. made of a transmission line with a different characteristic impedance c. liable to radiate

Last Answer : c. liable to radiate

Themechanicalsplice isbestsuited for a. quicker installation under ideal conditions b. minimum attenuation losses c. field service conditions d. situations in which cost of equipment is not a factor

Description : Themechanicalsplice isbestsuited for a. quicker installation under ideal conditions b. minimum attenuation losses c. field service conditions d. situations in which cost of equipment is not a factor

Last Answer : c. field service conditions

Under ideal conditions, the collector current is (a) Equal to base current (b) Nearly equal to emitter current (c) Less than base current (d) always zero

Description : Under ideal conditions, the collector current is (a) Equal to base current (b) Nearly equal to emitter current (c) Less than base current (d) always zero

Last Answer : (b) Nearly equal to emitter current

A means of beyond the line-of-sight propagation of microwave signal. A. Space wave B. Microwave link C. Troposcatter D. Point-to-point

Description : A means of beyond the line-of-sight propagation of microwave signal. A. Space wave B. Microwave link C. Troposcatter D. Point-to-point

Last Answer : C. Troposcatter

Interference in thin film is mainly because of (a) Division amplitude (b) Division of wave fronts (c) Addition of amplitude (d) Addition of wave fronts

Description : Interference in thin film is mainly because of (a) Division amplitude (b) Division of wave fronts (c) Addition of amplitude (d) Addition of wave fronts

Last Answer : (a) Division amplitude

Interference in thin film is mainly because of A. Division amplitude B. Division of wave fronts C. Addition of amplitude D. Addition of wave fronts

Description : Interference in thin film is mainly because of A. Division amplitude B. Division of wave fronts C. Addition of amplitude D. Addition of wave fronts

Last Answer : A. Division amplitude

The force between two long parallel conductors is inversely proportional to (a) radius of conductors (b) current in one conductor (c) product of current in two conductors (d) distance between the conductors

Description : The force between two long parallel conductors is inversely proportional to (a) radius of conductors (b) current in one conductor (c) product of current in two conductors (d) distance between the conductors

Last Answer : (d) distance between the conductors

The absorption ofradiowaves bythe atmosphere depends on a. their frequency b. their distance from the transmitter c. the polarization of the waves d. the polarization of the atmosphere

Description : The absorption ofradiowaves bythe atmosphere depends on a. their frequency b. their distance from the transmitter c. the polarization of the waves d. the polarization of the atmosphere

Last Answer : a. their frequency

High-frequencywaves are a. absorbed by the F2 layer b. reflected by the D layer c. capable of use for long-distance communications on the moon d. affected by the solar cycle

Description : High-frequencywaves are a. absorbed by the F2 layer b. reflected by the D layer c. capable of use for long-distance communications on the moon d. affected by the solar cycle

Last Answer : d. affected by the solar cycle

.A(75-j50)-is connectedtoa coaxialtransmission lineofZO=75 ,at 10GHz.The bestmethod ofmatching consistsin connecting a. a short-circuited stub at the load b. an inductance at the load c. a capacitance at some specific distance d. a short-circuited stub at some specific distance from the load

Description : .A(75-j50)-is connectedtoa coaxialtransmission lineofZO=75 ,at 10GHz.The bestmethod ofmatching consistsin connecting a. a short-circuited stub at the load b. an inductance at the load c. a capacitance at some specific distance d. a short-circuited stub at some specific distance from the load

Last Answer : d. a short-circuited stub at some specific distance from the load

The electric intensity at a distance of 1m from the point charge is 1μC is: (a) 9 × 109 N/C (b) 9 × 106 N/C (c) 9 × 103 N/C (d) 9 N/C

Description : The electric intensity at a distance of 1m from the point charge is 1μC is: (a) 9 × 109 N/C (b) 9 × 106 N/C (c) 9 × 103 N/C (d) 9 N/C

Last Answer : c) 9 × 103 N/C

In case of two identical charges placed at certain distance, the electric lines of force are: (a) Curved (b) Straight lines (c) Both (a) and (b) (d) None of these

Description : In case of two identical charges placed at certain distance, the electric lines of force are: (a) Curved (b) Straight lines (c) Both (a) and (b) (d) None of these

Last Answer : a) Curved

If the distance between the two charge bodies is halved, the force between them becomes: (a) Half (b) Four time (c) One fourth (d) Doubled

Description : If the distance between the two charge bodies is halved, the force between them becomes: (a) Half (b) Four time (c) One fourth (d) Doubled

Last Answer : (c) One fourth

Blue of the sky is due to the (a) Refraction of white light by the atmosphere (b) Reflection of white light by the earth (c) Scattering of white light by molecules of air (d) Interference of white light

Description : Blue of the sky is due to the (a) Refraction of white light by the atmosphere (b) Reflection of white light by the earth (c) Scattering of white light by molecules of air (d) Interference of white light

Last Answer : Ans:(c)

The phenomenon of light associated with the appearance of blue colour of the sky is – (1) Interference (2) Reflection (3) Refraction (4) Scattering

Description : The phenomenon of light associated with the appearance of blue colour of the sky is – (1) Interference (2) Reflection (3) Refraction (4) Scattering

Last Answer : (4) Scattering Explanation: During daylight, the sky appears to be blue because air scatters blue sunlight more than it scatters red. At night, the sky appears to be a mostly dark surface ... day sky is a result of scattering, which is dominated by a smallparticle limit called Rayleigh scattering.

The phenomenon of light associated with the appear-ance of blue colour of the sky is (1) Interference (2) Reflection (3) Refraction (4) Scattering

Description : The phenomenon of light associated with the appear-ance of blue colour of the sky is (1) Interference (2) Reflection (3) Refraction (4) Scattering

Last Answer : Scattering

What is the maximum line-of-sight distance between a paging antenna 250 ft high and a pager receiver 3.5ft of the ground? A. 25 km B.25mi C. 70.73 km D. 70.73 mi

Description : What is the maximum line-of-sight distance between a paging antenna 250 ft high and a pager receiver 3.5ft of the ground? A. 25 km B.25mi C. 70.73 km D. 70.73 mi

Last Answer : B.25mi

The distance from a radar set to a target measured along the line of sight is identified by what term?

Description : The distance from a radar set to a target measured along the line of sight is identified by what term?

Last Answer : Range.

Materials subjected to rapid reversal of magnetism should have (a) large area oiB-H loop (b) high permeability and low hysteresis loss (c) high co-ercivity and high retentivity (d) high co-ercivity and low density

Description : Materials subjected to rapid reversal of magnetism should have (a) large area oiB-H loop (b) high permeability and low hysteresis loss (c) high co-ercivity and high retentivity (d) high co-ercivity and low density

Last Answer : (b) high permeability and low hysteresis loss

Loss comparisons between fusionsplices andmechanicalsplices are a. 1:10 b. 10:1 c. 20:1 d. 1:20

Description : Loss comparisons between fusionsplices andmechanicalsplices are a. 1:10 b. 10:1 c. 20:1 d. 1:20

Last Answer : a. 1:10

The energy required to magnetize and demagnetize is called a) Saturation b) Retentivity c) Coercivity d) Hysteresis lossThe energy required to magnetize and demagnetize is called a) Saturation b) Retentivity c) Coercivity d) Hysteresis loss

Description : The energy required to magnetize and demagnetize is called a) Saturation b) Retentivity c) Coercivity d) Hysteresis loss

Last Answer : d) Hysteresis loss

The loss of energy over each A.C cycle magnetization and demagnetization of transformer, is called: a. Magnetization loss b. Hysteresis loss c. Demagnetization loss d. energy loss

Description : The loss of energy over each A.C cycle magnetization and demagnetization of transformer, is called: a. Magnetization loss b. Hysteresis loss c. Demagnetization loss d. energy loss

Last Answer : c. Demagnetization loss

A transformer: a. Works on A.C. only b. Works on D.C only c. Works on A.C. and D.C d. Has no hysteresis loss

Description : A transformer: a. Works on A.C. only b. Works on D.C only c. Works on A.C. and D.C d. Has no hysteresis loss

Last Answer : a. Works on A.C. only

Mechanism or device which enables the TV camera to move in internal and tilting motion. A. Tilting B. Scanner C. Pan/tilt device D. Panning device

Description : Mechanism or device which enables the TV camera to move in internal and tilting motion. A. Tilting B. Scanner C. Pan/tilt device D. Panning device

Last Answer : C. Pan/tilt device

Which of the following statements is incorrect? (A) Error due to refraction may not be completely eliminated by reciprocal levelling (B) Tilting levels are commonly used for precision work (C) The last reading of levelling is always a foresight (D) All of the above statements are incorrect

Description : Which of the following statements is incorrect? (A) Error due to refraction may not be completely eliminated by reciprocal levelling (B) Tilting levels are commonly used for precision work (C) The last reading of levelling is always a foresight (D) All of the above statements are incorrect

Last Answer : (D) All of the above statements are incorrect

The function of cleats in a roof truss is (A) To support the common rafter (B) To support purlins (C) To prevent the purlins from tilting (D) All of the above

Description : The function of cleats in a roof truss is (A) To support the common rafter (B) To support purlins (C) To prevent the purlins from tilting (D) All of the above

Last Answer : Option C

Belt Tension can be adjusted by a. idler pulley b. slide rails c. tilting plate drive d. all the above

Description : Belt Tension can be adjusted by a. idler pulley b. slide rails c. tilting plate drive d. all the above

Last Answer : d. all the above

Cracks in return walls/ wing walls or Slight tilting/ bulging of abutments are the signs of distressed bridge under a) Group I b) Group II* c) Both of the above d) None of the above

Description : Cracks in return walls/ wing walls or Slight tilting/ bulging of abutments are the signs of distressed bridge under a) Group I b) Group II* c) Both of the above d) None of the above

Last Answer : b) Group II*

Tilting of rails is done at a slope of a. 1 in 30 b. 1 in 25 c. 1 in 20* d. 1 in 15

Description : Tilting of rails is done at a slope of a. 1 in 30 b. 1 in 25 c. 1 in 20* d. 1 in 15

Last Answer : c. 1 in 20*