________ is a typeof transmission impairment in which the signal loses strength due to the different propagation speeds of each frequency that makes up the signal. A) Attenuation B) Distortion C) Noise D) Decibel

________ is a typeof transmission impairment in which the signal loses strength due to the different propagation speeds of each frequency that
makes up the signal.
A)
Attenuation
B)
Distortion
C)
Noise
D)
Decibel
by

1 Answer

Answer :

Distortion
by

Related questions

________ is a typeof transmission impairment in which the signal loses strength due to theresistance of the transmission medium. A) Attenuation B) Distortion C) Noise D) Decibel

Description : ________ is a typeof transmission impairment in which the signal loses strength due to theresistance of the transmission medium. A) Attenuation B) Distortion C) Noise D) Decibel

Last Answer : Attenuation

_______ is a typeof transmission impairment in which an outside sourcesuch as crosstalk corrupts asignal. A) Attenuation B) Distortion C) Noise D) Decibel

Description : _______ is a typeof transmission impairment in which an outside sourcesuch as crosstalk corrupts asignal. A) Attenuation B) Distortion C) Noise D) Decibel

Last Answer : Noise

..................... is a type of transmission impairment in which the signal loses strength due to the resistance of the transmission medium. (A) Attenuation (B) Distortion (C) Noise (D) Decibel

Description : ..................... is a type of transmission impairment in which the signal loses strength due to the resistance of the transmission medium. (A) Attenuation (B) Distortion (C) Noise (D) Decibel

Last Answer : (A) Attenuation

_________can impair a signal. A) Attenuation B) Distortion C) Noise D) All of theabove

Description : _________can impair a signal. A) Attenuation B) Distortion C) Noise D) All of theabove

Last Answer : All of theabove

The random and unpredictable electric signal from natural causes, both internal and external to the system is know as ________. A. Distortion B. Noise C. Attenuation D. Interference

Description : The random and unpredictable electric signal from natural causes, both internal and external to the system is know as ________. A. Distortion B. Noise C. Attenuation D. Interference

Last Answer : B. Noise

The .............. measures the relative strengths of two signals or a signal at two different points. (A) frequency (B) attenuation (C) throughput (D) decibel

Description : The .............. measures the relative strengths of two signals or a signal at two different points. (A) frequency (B) attenuation (C) throughput (D) decibel

Last Answer : (D) decibel

The loss in signal power as light travels down the fiber is called ............. A) Attenuation B) Propagation C) Scattering D) Interruption

Description : The loss in signal power as light travels down the fiber is called ............. A) Attenuation B) Propagation C) Scattering D) Interruption

Last Answer : A) Attenuation

Attenuation and noise can impair a signal. True False

Description : Attenuation and noise can impair a signal. True False

Last Answer : True

_________ is the random and unpredictable electric signals from natural causes, both internal and external to the system. A. Interference B. Attenuation C. Distortion D. Noise

Description : _________ is the random and unpredictable electric signals from natural causes, both internal and external to the system. A. Interference B. Attenuation C. Distortion D. Noise

Last Answer : D. Noise

Reduction of signal strength during transmission is called attenuation. -Technology

Description : Reduction of signal strength during transmission is called attenuation. -Technology

Last Answer : TrueDuring transmission, the signal strength is reduced, this phenomenon is called attenuation.

When propagationspeed is multiplied by propagation time, we get the ________. A) throughput B) wavelength of thesignal C) distortionfactor D) distancea signal or bit has traveled

Description : When propagationspeed is multiplied by propagation time, we get the ________. A) throughput B) wavelength of thesignal C) distortionfactor D) distancea signal or bit has traveled

Last Answer : distancea signal or bit has traveled

Computers cannot communicate with each other directly over telephone lines because they usedigitalpulses whereas telephone lines useanalog sound frequencies. What is the name of the device which permits digital to analog conversion at the start of a long distance transmission? A. Interface B. Modem C. Attenuation D. Teleprocessor E. None of the above

Description : Computers cannot communicate with each other directly over telephone lines because they usedigitalpulses whereas telephone lines useanalog sound frequencies. What is the name of the device which permits digital to analog ... A. Interface B. Modem C. Attenuation D. Teleprocessor E. None of the above

Last Answer : Modem

The distance a simple signal can travel in one period is called ………… A. Wavelength B. propagation speed C. Frequency D. both a and b

Description : The distance a simple signal can travel in one period is called ………… A. Wavelength B. propagation speed C. Frequency D. both a and b

Last Answer : A. Wavelength

What is the mixing process? A. Distortion caused by auroral propagation B. The combination of two signals to produce sum and difference frequencies. C. The elimination of noise in wideband receiver by phase differentiation D. The elimination of noise in a wideband receiver by phase comparison

Description : What is the mixing process? A. Distortion caused by auroral propagation B. The combination of two signals to produce sum and difference frequencies. C. The elimination of noise in wideband receiver by phase differentiation D. The elimination of noise in a wideband receiver by phase comparison

Last Answer : B. The combination of two signals to produce sum and difference frequencies.

The most common typeof storage devices are– (A) persistent (B) optical (C) magnetic (D) flash (E) steel

Description : The most common typeof storage devices are– (A) persistent (B) optical (C) magnetic (D) flash (E) steel

Last Answer : flash

ECE Board Exam November 1996 The loss in signal power as light travels down a fiber is A. attenuation B. propagation C. absorption D. scattering

Description : ECE Board Exam November 1996 The loss in signal power as light travels down a fiber is A. attenuation B. propagation C. absorption D. scattering

Last Answer : A. attenuation

The loss in signal power as light travels down the fiber is called ............. A) Attenuation B) Propagation C) Scattering D) Interruption

Description : The loss in signal power as light travels down the fiber is called ............. A) Attenuation B) Propagation C) Scattering D) Interruption

Last Answer : A) Attenuation

The loss in signal power as light travels down the fiber is called ............. A) Attenuation B) Propagation C) Scattering D) Interruption

Description : The loss in signal power as light travels down the fiber is called ............. A) Attenuation B) Propagation C) Scattering D) Interruption

Last Answer : A) Attenuation

The loss in signal power as light travels down the fiber is called a. attenuation b. progragation c. scattering d. interruption

Description : The loss in signal power as light travels down the fiber is called a. attenuation b. progragation c. scattering d. interruption

Last Answer : attenuation

In a time-domain plot, the horizontal axis is a measure of ________. A) signal amplitude B) frequency C) phase D) time

Description : In a time-domain plot, the horizontal axis is a measure of ________. A) signal amplitude B) frequency C) phase D) time

Last Answer : time

What arethe most commonly used transmission speeds in BPS usedin datacommunication? A. 300 B. 1200 C. 2400 D. 9600 E. None of the above

Description : What arethe most commonly used transmission speeds in BPS usedin datacommunication? A. 300 B. 1200 C. 2400 D. 9600 E. None of the above

Last Answer : 9600

In_____ transmission, the frequency of the carrier signal is modulated to follow the changing voltage level (amplitude)of the modulating signal. The peak amplitude and phase of the carrier signal remainconstant,but as the amplitudeof the information signal changes, thefrequency of thecarrier changes correspondingly. A) AM B) PM C) FM D) none of the above

Description : In_____ transmission, the frequency of the carrier signal is modulated to follow the changing voltage level (amplitude)of the modulating signal. The peak amplitude and phase of the carrier signal remainconstant,but as ... of thecarrier changes correspondingly. A) AM B) PM C) FM D) none of the above

Last Answer : FM

Decrease in strength of signal is known as A. tuning B. modulation C. attenuation D. amplification

Description : Decrease in strength of signal is known as A. tuning B. modulation C. attenuation D. amplification

Last Answer : attenuation

Band loss is ∙ a. A reduction in transmitter power caused by earth’s surface curvature ∙ b. A reduction in strength of the signal caused by folded dipole bends ∙ c. An attenuation increase caused by bends radiating from the side of the fiber ∙ d. All of these

Description : Band loss is ∙ a. A reduction in transmitter power caused by earth’s surface curvature ∙ b. A reduction in strength of the signal caused by folded dipole bends ∙ c. An attenuation increase caused by bends radiating from the side of the fiber ∙ d. All of these

Last Answer : c. An attenuation increase caused by bends radiating from the side of the fiber

Which multiplexing technique shifts each signal to a different carrier frequency? A) FDM B) TDM C) Both (a)and (b) D) None of the above

Description : Which multiplexing technique shifts each signal to a different carrier frequency? A) FDM B) TDM C) Both (a)and (b) D) None of the above

Last Answer : FDM

Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Description : Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Last Answer : d. 256

Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464

Description : Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464

Last Answer : c. 464

What will be the efficiency of a Stop and Wait protocol, if the transmission time for a frame is 20ns and the propagation time is 30ns? a. 20% b. 25% c. 40% d. 66%

Description : What will be the efficiency of a Stop and Wait protocol, if the transmission time for a frame is 20ns and the propagation time is 30ns? a. 20% b. 25% c. 40% d. 66%

Last Answer : b. 25%

A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of an acknowledgement is 100 bytes and the transmission rate at the receiver is 8 Kbps. The one-way propagation delay is 100 milliseconds. Assuming no frame is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Last Answer : a. 2500

In a token ring network the transmission speed is 10^7 bps and the propagation speed is 200 metres/micro second. The 1- bit delay in this network is equivalent to: a. 500 metres of cable. b. 200 metres of cable. c. 20 metres of cable. d. 50 metres of cable

Description : In a token ring network the transmission speed is 10^7 bps and the propagation speed is 200 metres/micro second. The 1- bit delay in this network is equivalent to: a. 500 metres of cable. b. 200 metres of cable. c. 20 metres of cable. d. 50 metres of cable

Last Answer : c. 20 metres of cable.

A telephone cable has following primary constants per loop kilometer ,R=30Ω, L=20mH,C=0.06µF,G=0.If the applied signal has an angular frequency of 5000 rad/sec.., Determine (i) Characteristics impedence (ii) Attenuation constant

Description : A telephone cable has following primary constants per loop kilometer ,R=30Ω, L=20mH,C=0.06µF,G=0.If the applied signal has an angular frequency of 5000 rad/sec.., Determine (i) Characteristics impedence (ii) Attenuation constant

Last Answer : A telephone cable has following primary constants per loop kilometer ,R=30Ω, L=20mH,C=0.06µF,G=0.If the applied signal has an angular frequency of 5000 rad/sec.., Determine (i) Characteristics impedence (ii) Attenuation constant

When measuring harmonic distortion, you set the signal generator to input a 15-kHz test signal. To what frequency should you set the wave analyzer?

Description : When measuring harmonic distortion, you set the signal generator to input a 15-kHz test signal. To what frequency should you set the wave analyzer?

Last Answer : 45 kHz.

Signals with a frequency between 2 MHz and 30 MHz use ______ propagation. A) ground B) sky C) line-of-sight D) none of the above

Description : Signals with a frequency between 2 MHz and 30 MHz use ______ propagation. A) ground B) sky C) line-of-sight D) none of the above

Last Answer : sky

Signals with a frequency below 2 MHz use _______ propagation. A) ground B) sky C) line-of-sight D) none of the above

Description : Signals with a frequency below 2 MHz use _______ propagation. A) ground B) sky C) line-of-sight D) none of the above

Last Answer : ground

Which of the following refers to theterms "residual error rate"? A. the number of biterrors per twenty four hours of continuous operation onanasynchronous line B. The probability that one or moreerrors will be undetected whenan error detection scheme is used C. the probability thatone or more errors will bedetected when anerror detection mechanism is used D. signal tonoise ratio dividedby the ratio of energy perbit to noise per hertz E. None of the above

Description : Which of the following refers to theterms "residual error rate"? A. the number of biterrors per twenty four hours of continuous operation onanasynchronous line B. The probability that one or moreerrors ... tonoise ratio dividedby the ratio of energy perbit to noise per hertz E. None of the above

Last Answer : The probability that one or moreerrors will be undetected whenan error detection scheme is used

A noise where foreign signal enters the path of the transmitted signal is called …… A. Impulse B. Inter modulation C. cross talk D. both b and c

Description : A noise where foreign signal enters the path of the transmitted signal is called …… A. Impulse B. Inter modulation C. cross talk D. both b and c

Last Answer : C. cross talk

The unit of noise pollution (level) is – (1) decibel (2) decimal (3) ppm (4) None of these

Description : The unit of noise pollution (level) is – (1) decibel (2) decimal (3) ppm (4) None of these

Last Answer : (1) decibel Explanation: Noise pollution refers to any unpleasant, damaging or irritating noise that has the potential to harm people, wildlife or the environment. The decibel (dB) is the main unit used ... can also be measured. by its pitch, which is the frequency of sound vibrations per second.

Noise is measured in – (1) Watt (2) REM (3) Centigrade (4) Decibel

Description : Noise is measured in – (1) Watt (2) REM (3) Centigrade (4) Decibel

Last Answer : (4) Decibel Explanation: The decibel (dB) is a logarithmic unit that indicates the ratio of a physical quantity (usually power or intensity) relative to a specified or implied reference level. A ratio in ... from their roosts in caves, attics, or trees at dusk and hunt for insects into the night.

The unit of measurement of noise is – (1) Decibel (2) Hertz (3) Amplifier (4) Acoustics

Description : The unit of measurement of noise is – (1) Decibel (2) Hertz (3) Amplifier (4) Acoustics

Last Answer : (1) Decibel Explanation: The decibel (dB) is the unit used to measure the intensity of sound or noise level. It is given in terms of a logarithmic function of a ratio of power intensities. One ... one bel, named in honor of Alexander Graham Bell who was the inventor of the telephone and phonograph.

A decibel is – (1) A musical instrument (2) The wavelength of noise (3) A musical note (4) A measure of sound level

Description : A decibel is – (1) A musical instrument (2) The wavelength of noise (3) A musical note (4) A measure of sound level

Last Answer : (4) A measure of sound level Explanation: The decibel (dB) is a logarithmic unit that indicates the ratio of a physical quantity (usually power or intensity) relative to a specified or implied reference ... ratio in decibels is ten times the logarithm to base 10 of the ratio of two power quantities.

Noise pollution level in a chemical plant is expressed in (A) Roentgen (B) Decibel (C) Hertz (D) None of these

Description : Noise pollution level in a chemical plant is expressed in (A) Roentgen (B) Decibel (C) Hertz (D) None of these

Last Answer : (B) Decibel

The unit of measurement of noise is (1) Decibel (2) Hertz (3) Amplifier (4) Acoustics

Description : The unit of measurement of noise is (1) Decibel (2) Hertz (3) Amplifier (4) Acoustics

Last Answer : Decibel

The unit of noise pollution (level) is : (1) decibel (2) decimal (3) ppm (4) None of these

Description : The unit of noise pollution (level) is : (1) decibel (2) decimal (3) ppm (4) None of these 

Last Answer : decibel

Noise is measured in (1) Watt (2) REM (3) Centigrade(4) Decibel

Description : Noise is measured in (1) Watt (2) REM (3) Centigrade(4) Decibel

Last Answer : Decibel

A decibel is (1) a musical instrument (2) the wavelength of noise (3) a musical note (4) a measure of sound level

Description : A decibel is (1) a musical instrument (2) the wavelength of noise (3) a musical note (4) a measure of sound level

Last Answer : a measure of sound level

Which of the following is an advantage to using fiber optics data transmission? a. resistance to data theft b. fast data transmission rate c. low noise level d. all of above

Description : Which of the following is an advantage to using fiber optics data transmission? a. resistance to data theft b. fast data transmission rate c. low noise level d. all of above

Last Answer : fast data transmission rate

A term associated with the comparison of processing speeds of different computer system is: a. EFTS b. MPG c. MIPS d. CPS

Description : A term associated with the comparison of processing speeds of different computer system is: a. EFTS b. MPG c. MIPS d. CPS

Last Answer : MIPS

What is the propagation velocity of a signal in a transmission line whose inductance and capacitance are 5μH/m and 20μF/m respectively? A. 100x103 m/s B. 100 m/s C. 10x103 m/s D. 100x106 m/s

Description : What is the propagation velocity of a signal in a transmission line whose inductance and capacitance are 5μH/m and 20μF/m respectively? A. 100x103 m/s B. 100 m/s C. 10x103 m/s D. 100x106 m/s

Last Answer : A. 100x103 m/s

What do you call the phenomenon in digital circuits that describe the duration of time a digital signal passes a circuit? A. Transmission time B. Elapsed time C. Propagation delay D. Travel delay

Description : What do you call the phenomenon in digital circuits that describe the duration of time a digital signal passes a circuit? A. Transmission time B. Elapsed time C. Propagation delay D. Travel delay

Last Answer : C. Propagation delay