_____uses 1550-mm single modefiber. A) 10GBase-S B) 10GBase-L C) 10GBase-E D) none of the above

_____uses short-wave850-nm multimode fiber.
A)
10GBase-S
B)
10GBase-L
C)
10GBase-E
D)
none of the above
by

1 Answer

Answer :

10GBase-E
by

Related questions

____uses 1550-mm single modefiber. A) 10GBase-S B) 10GBase-L C) 10GBase-E D) none of the above

Description : ____uses 1550-mm single modefiber. A) 10GBase-S B) 10GBase-L C) 10GBase-E D) none of the above

Last Answer : 10GBase-E

_____uses short-wave850-nm multimode fiber. A) 10GBase-S B) 10GBase-L C) 10GBase-E D) none of the above

Description : _____uses short-wave850-nm multimode fiber. A) 10GBase-S B) 10GBase-L C) 10GBase-E D) none of the above

Last Answer : 10GBase-S

______uses long-wave 1310-nm single mode fiber. A) 10GBase-S B) 10GBase-L C) 10GBase-E D) none of the above

Description : ______uses long-wave 1310-nm single mode fiber. A) 10GBase-S B) 10GBase-L C) 10GBase-E D) none of the above

Last Answer : 10GBase-L

_____uses fiber-optic cable. A) 10Base5 B) 10Base2 C) 10Base-T D) 10Base-F

Description : _____uses fiber-optic cable. A) 10Base5 B) 10Base2 C) 10Base-T D) 10Base-F

Last Answer : 10Base-F

A sum of Rs. 1550 was lent partly at 5% and partly at 8% per annum simple interest. The total interest received after 4 yr was Rs. 400. The ratio of the money lent at 8% to that lent at 5% is? (a) 15:16 (b) 16:17 (c) 19:17 (d) 21:26 (e) 20:17

Description : A sum of Rs. 1550 was lent partly at 5% and partly at 8% per annum simple interest. The total interest received after 4 yr was Rs. 400. The ratio of the money lent at 8% to that lent at 5% is? (a) 15:16 (b) 16:17 (c) 19:17 (d) 21:26 (e) 20:17

Last Answer : (a) 15:16

what is 1550 dm expressed in hectometers? -General Knowledge

Description : what is 1550 dm expressed in hectometers? -General Knowledge

Last Answer : 1.55 hm is 1550 dm expressed in hectometers.

How much is 1550 divided by 51.45?

Description : How much is 1550 divided by 51.45?

Last Answer : 30.1263

Typical waste gases temperature from glass melting furnace a) 1000-1550 oC b) 800-950 oC c) 650–750 oC d) 760-815 oC

Description : Typical waste gases temperature from glass melting furnace a) 1000-1550 oC b) 800-950 oC c) 650–750 oC d) 760-815 oC

Last Answer : 1000-1550 oC

Flat rate parcel rates Flat Rate Parcel Boxes size Dimension of boxes (in mm) Weight (in Kg.) Tariff (in Rs.) Small - S 250*50*300 0 to 1 125 Medium - M 250*100*300 Above 1 to 2.5 200 Large - L 300*250*200 Above 2.5 to 5 400

Description : Flat rate parcel rates Flat Rate Parcel Boxes size Dimension of boxes (in mm) Weight (in Kg.) Tariff (in Rs.) Small - S 250*50*300 0 to 1 125 Medium - M 250*100*300 Above 1 to 2.5 200 Large - L 300*250*200 Above 2.5 to 5 400

Last Answer : Large - L 300*250*200 Above 2.5 to 5 400

A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system (in SI units) is given below : Δ P/L = 375 × 10 3 VOM + 10.94 × 10 6 V2 OM (SI units) If water is to be used as the fluidising medium, the minimum fluidisation velocity, VOM is (A) 12 mm/s (B) 16 mm/s (C) 24 mm/s (D) 28 mm/s

Description : A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle ... fluidisation velocity, VOM is (A) 12 mm/s (B) 16 mm/s (C) 24 mm/s (D) 28 mm/s

Last Answer : (B) 16 mm/s

In SQL, which command(s) is(are) used to issue multiple CREATE TABLE, CREATE VIEW, and GRANT statements in a single transaction? A. CREATE PACKAGE B. CREATE SCHEMAC.CREATE CLUSTERD.All of theaboveE.None of the above;

Description : In SQL, which command(s) is(are) used to issue multiple CREATE TABLE, CREATE VIEW, and GRANT statements in a single transaction? A. CREATE PACKAGE B. CREATE SCHEMA C. CREATE CLUSTER D. All of theabove E. None of the above;

Last Answer : CREATE SCHEMA

The idea of RZ andthe ideaof NRZ-L are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Description : The idea of RZ andthe ideaof NRZ-L are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : Manchester

In______, the changeor lackof change in the level of the voltagedetermines the value of the bit. A) NRZ-I B) NRZ-L C) both (a)and (b) D) neither (a) nor (b)

Description : In______, the changeor lackof change in the level of the voltagedetermines the value of the bit. A) NRZ-I B) NRZ-L C) both (a)and (b) D) neither (a) nor (b)

Last Answer : NRZ-I

In_____, the level of the voltagedetermines the valueof the bit. A) NRZ-I B) NRZ-L C) both (a) and (b) D) neither (a) nor (b)

Description : In_____, the level of the voltagedetermines the valueof the bit. A) NRZ-I B) NRZ-L C) both (a) and (b) D) neither (a) nor (b)

Last Answer : NRZ-L

The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channelcapacity. Assuming that processing delay is negligible, the minimum number of bits for the sequence number field in a frame for maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Description : The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channel capacity. Assuming that processing ... maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Last Answer : c. C

A suspension of glass beads in ethylene glycol has a hindered settling velocity of 1.7 mm/s, while the terminal settling velocity of a single glass bead in ethylene glycol is 17 mm/s. If the Richardson-Zaki hindered settling index is 4.5, the volume fraction of solids in the suspension is (A) 0.1 (B) 0.4 (C) 0.6 (D) None of these

Description : A suspension of glass beads in ethylene glycol has a hindered settling velocity of 1.7 mm/s, while the terminal settling velocity of a single glass bead in ethylene glycol is 17 mm/s. If the Richardson-Zaki hindered settling index ... in the suspension is (A) 0.1 (B) 0.4 (C) 0.6 (D) None of these

Last Answer : (C) 0.6

A gas occupies a volume of 0.2 L at 176 mm Hg. What volume will the gas occupy at 760 mm Hg?

Description : A gas occupies a volume of 0.2 L at 176 mm Hg. What volume will the gas occupy at 760 mm Hg?

Last Answer : 0.05 L

A gas occupies a volume of 0.2 L at 176 mm Hg. What volume will the gas occupy at 760 mm Hg?

Description : A gas occupies a volume of 0.2 L at 176 mm Hg. What volume will the gas occupy at 760 mm Hg?

Last Answer : 0.05 L

Facia boards of platform shelters shall have a minimum horizontal clearance of ……. from C.L. of track at a minimum height of 4.61m above RL. a) 2360 mm b) 3660 mm c) 3000 mm d) 1600 mm*

Description : Facia boards of platform shelters shall have a minimum horizontal clearance of ……. from C.L. of track at a minimum height of 4.61m above RL. a) 2360 mm b) 3660 mm c) 3000 mm d) 1600 mm*

Last Answer : d) 1600 mm*

The minimum vertical clearance above R.L. to bottom of ROB near the yard shall be a) 6525 mm* b) 5870 mm c) 2360 mm d) 6250 mm

Description : The minimum vertical clearance above R.L. to bottom of ROB near the yard shall be a) 6525 mm* b) 5870 mm c) 2360 mm d) 6250 mm

Last Answer : a) 6525 mm*

The length of the countersunk head rivet shank is, when L = length of the rivet, G = length of grip in mm; D = Dia of rivet in mm a) L =G +0.5 D + 1mm for every 4 mm of grip or part thereof * b) b) L =G +0.5 D + 1mm c) L =G +0.5 D d) None of the above

Description : The length of the countersunk head rivet shank is, when L = length of the rivet, G = length of grip in mm; D = Dia of rivet in mm a) L =G +0.5 D + 1mm for every 4 mm of grip or part thereof * b) b) L =G +0.5 D + 1mm c) L =G +0.5 D d) None of the above

Last Answer : a) L =G +0.5 D + 1mm for every 4 mm of grip or part thereof *

he length of the snap head rivet shank is, when L = length of the rivet, G = length of grip in mm; D = Dia of rivet in mm a) L =G +1.5 D + 1mm for every 4 mm of grip or part thereof * b) b) L =G +0.5 D + 1mm c) L =G +0.5 D d) None of the above

Description : he length of the snap head rivet shank is, when L = length of the rivet, G = length of grip in mm; D = Dia of rivet in mm a) L =G +1.5 D + 1mm for every 4 mm of grip or part thereof * b) b) L =G +0.5 D + 1mm c) L =G +0.5 D d) None of the above

Last Answer : a) L =G +1.5 D + 1mm for every 4 mm of grip or part thereof *

The following is true of 'new formula' WHO-ORS: A. It has Na+ ion concentration of 75 mM/L B. Its glucose concentration is 75 mM/L C. Its total osmolarity is 245 mOsm/L D. All of the above are correct

Description : The following is true of 'new formula' WHO-ORS: A. It has Na+ ion concentration of 75 mM/L B. Its glucose concentration is 75 mM/L C. Its total osmolarity is 245 mOsm/L D. All of the above are correct

Last Answer : D. All of the above are correct

Which vasodilator is most suitable for a patient of CHF who is symptomatic even at rest and has a central venous pressure of 25 mm Hg and cardiac index 1.8 L/min/m2 : A. Glyceryl trinitrate B. Enalapril C. Hydralazine D. Nifedipine

Description : Which vasodilator is most suitable for a patient of CHF who is symptomatic even at rest and has a central venous pressure of 25 mm Hg and cardiac index 1.8 L/min/m2 : A. Glyceryl trinitrate B. Enalapril C. Hydralazine D. Nifedipine

Last Answer : B. Enalapril

A disk storage medium in the form of an assembly containing a single rigid magnetic disk permanently is a. Fixed disk b. Disk cartridge c. Card punch d. Card reader

Description : A disk storage medium in the form of an assembly containing a single rigid magnetic disk permanently is a. Fixed disk b. Disk cartridge c. Card punch d. Card reader

Last Answer : Disk cartridge

In most IBM PCs, the CPU, the device drives, memory expansion slots and active components are mounted on a single board. What is the name of this board? a. Motherboard b. Breadboard c. Daughter board d. Grandmother board

Description : In most IBM PCs, the CPU, the device drives, memory expansion slots and active components are mounted on a single board. What is the name of this board? a. Motherboard b. Breadboard c. Daughter board d. Grandmother board

Last Answer : Motherboard

An integrated circuit is a. A complicated circuit b. An integrating device c. Much costlier than a single transistor d. Fabricated on a tiny silicon chip

Description : An integrated circuit is a. A complicated circuit b. An integrating device c. Much costlier than a single transistor d. Fabricated on a tiny silicon chip

Last Answer : Fabricated on a tiny silicon chip

Floppy disks are available in a. Single side single density b. Single side double density c. Both of above d. None of above

Description : Floppy disks are available in a. Single side single density b. Single side double density c. Both of above d. None of above

Last Answer : Both of above

A burst error means that two or more bits in the dataunit havechanged. A) double-bit B) burst C) single-bit D) none of the above

Description : A burst error means that two or more bits in the dataunit havechanged. A) double-bit B) burst C) single-bit D) none of the above

Last Answer : burst

________is the set of techniques that allows the simultaneous transmission of multiple signalsacrossa single data link. A) Demodulating B) Multiplexing C) Compressing D) None of the above

Description : ________is the set of techniques that allows the simultaneous transmission of multiple signalsacrossa single data link. A) Demodulating B) Multiplexing C) Compressing D) None of the above

Last Answer : Multiplexing

A _________ sine wave is not useful in data communications; we need to send a _______signal. A) composite; single-frequency B) single-frequency; composite C) single-frequency;double-frequency D) none of the above

Description : A _________ sine wave is not useful in data communications; we need to send a _______signal. A) composite; single-frequency B) single-frequency; composite C) single-frequency;double-frequency D) none of the above

Last Answer : single-frequency; composite

Transmission control protocol ___________ a. is a connection-oriented protocol b. uses a three way handshake to establish a connection c. receives data from application as a single stream d. all of the mentioned

Description : Transmission control protocol ___________ a. is a connection-oriented protocol b. uses a three way handshake to establish a connection c. receives data from application as a single stream d. all of the mentioned

Last Answer : d. all of the mentioned

Transport layer aggregates data from different applications into a single stream before passing it to ____________ a. network layer b. data link layer c. application layer d. physical layer

Description : Transport layer aggregates data from different applications into a single stream before passing it to ____________ a. network layer b. data link layer c. application layer d. physical layer

Last Answer : a. network layer

Transmission control protocol ___________ a. is a connection-oriented protocol b. uses a three way handshake to establish a connection c. receives data from application as a single stream d. all of the mentioned

Description : Transmission control protocol ___________ a. is a connection-oriented protocol b. uses a three way handshake to establish a connection c. receives data from application as a single stream d. all of the mentioned

Last Answer : d. all of the mentioned

Transport layer aggregates data from different applications into a single stream before passing it to ____________ a. network layer b. data link layer c. application layer d. physical layer

Description : Transport layer aggregates data from different applications into a single stream before passing it to ____________ a. network layer b. data link layer c. application layer d. physical layer

Last Answer : a. network layer

The ability of a single network to span multiple physical networks is known as ______ a. Subnettingb. Masking c. Fragmenting d. Hopping

Description : The ability of a single network to span multiple physical networks is known as ______ a. Subnetting b. Masking c. Fragmenting d. Hopping

Last Answer : a. Subnetting

A single channel is shared by multiple signals by _____ a. analog modulation b. digital modulation c. multiplexing d. phase modulation

Description : A single channel is shared by multiple signals by _____ a. analog modulation b. digital modulation c. multiplexing d. phase modulation

Last Answer : c. multiplexing

Which of the following network is used to connect a number of computers to each other by cables in a single location? A. WAN B. LAN C. MAN D. both b and c

Description : Which of the following network is used to connect a number of computers to each other by cables in a single location? A. WAN B. LAN C. MAN D. both b and c

Last Answer : B. LAN

Transport layer aggregates data from different applications into a single stream before passing it to ____________ A. network layer B. data link layer C. application layer D. physical layer

Description : Transport layer aggregates data from different applications into a single stream before passing it to ____________ A. network layer B. data link layer C. application layer D. physical layer

Last Answer : A. network layer

In IPv6, _______ address defines a single computer A. a unicast B. a multicastC. an anycast D. none of the above

Description : In IPv6, _______ address defines a single computer A. a unicast B. a multicast C. an anycast D. none of the above

Last Answer : A. a unicast

The _______ layer ensures reliable transmission on a single link A. network B. physical C. data link D. transport

Description : The _______ layer ensures reliable transmission on a single link A. network B. physical C. data link D. transport

Last Answer : C. data link

Transmission control protocol is a) connection oriented protocol b) uses a three way handshake to establish a connection c) recievs data from application as a single stream d) all of the mentioned

Description : Transmission control protocol is a) connection oriented protocol b) uses a three way handshake to establish a connection c) recievs data from application as a single stream d) all of the mentioned

Last Answer : d) all of the mentioned

Which of the following network is used to connect a number of computers to eachother by cables in a single location? a. LAN b. Internet c. WAN d. MAN

Description : Which of the following network is used to connect a number of computers to eachother by cables in a single location? a. LAN b. Internet c. WAN d. MAN

Last Answer : a. LAN

In SQL, which command(s) is(are) used to change atable's storage characteristics? A. ALTER TABLE B. MODIFY TABLE C. CHANGE TABLE D. All of theabove E. None of the abov

Description : In SQL, which command(s) is(are) used to change atable's storage characteristics? A. ALTER TABLE B. MODIFY TABLE C. CHANGE TABLE D. All of theabove E. None of the abov

Last Answer : ALTER TABLE

. In SQL, which command(s) is(are) usedto recompilea storedfunction? A. SET FUNCTION B. SET STORED FUNCTION C. ALTER FUNCTION D. All of theabove E. None of the above

Description : . In SQL, which command(s) is(are) usedto recompilea storedfunction? A. SET FUNCTION B. SET STORED FUNCTION C. ALTER FUNCTION D. All of theabove E. None of the above

Last Answer : ALTER FUNCTION

In SQL, the command(s) is (are)used tocreate an index for atable or cluster A. CREATE INDEX B. MODIFY INDEX C. SET INDEX TO FILE D. All of theabove E. None of the above

Description : In SQL, the command(s) is (are)used tocreate an index for atable or cluster A. CREATE INDEX B. MODIFY INDEX C. SET INDEX TO FILE D. All of theabove E. None of the above

Last Answer : CREATE INDEX

What is the characteristic impedance of a single wire with a diameter d= 0.25 mm placed at the center between grounded parallel planes separated by 1 mm apart. The wire is held by a material with a velocity factor of 0.75. A. 85 Ω B. 63 Ω C. 50 Ω D. 75 Ω

Description : What is the characteristic impedance of a single wire with a diameter d= 0.25 mm placed at the center between grounded parallel planes separated by 1 mm apart. The wire is held by a material with a velocity factor of 0.75. A. 85 Ω B. 63 Ω C. 50 Ω D. 75 Ω

Last Answer : D. 75 Ω

The recommended width of Single line formation cutting for BG excluding drain is a) 6250 mm* b) 6850mm c) 54 90mm d) 6100mm

Description : The recommended width of Single line formation cutting for BG excluding drain is a) 6250 mm* b) 6850mm c) 54 90mm d) 6100mm

Last Answer : a) 6250 mm*

A Bluetooth network consists of _____primary device(s)and up to____ secondary devices. A) one; five B) five; three C) two; six D) one; seven

Description : A Bluetooth network consists of _____primary device(s)and up to____ secondary devices. A) one; five B) five; three C) two; six D) one; seven

Last Answer : one; seven

While there is (are) only _____ way(s) to send paralleldata, there is (are) three subclass(es) of serial transmission. A) one; two B) two; three C) one; three D) none of the above

Description : While there is (are) only _____ way(s) to send paralleldata, there is (are) three subclass(es) of serial transmission. A) one; two B) two; three C) one; three D) none of the above

Last Answer : one; three