Ionic compounds have high melting and boiling points because A) less energy is required to break the strong interionic attraction B) large amount of energy is required to break the interionic attraction C) No energy is required D) None of the above

Ionic compounds have high melting and boiling points because
A) less energy is required to break the strong interionic attraction
B) large amount of energy is required to break the interionic attraction
C) No energy is required
D) None of the above
by

1 Answer

Answer :

B) large amount of energy is required to break the interionic attraction
by

Related questions

Most covalent compounds (a) Behave like electrolytes in the molten state (b) Have high melting and boiling points (c) Are hard substances because of strong covalent bonds (d) Are more soluble in non-polar solvents than in polar solvents

Description : Most covalent compounds (a) Behave like electrolytes in the molten state (b) Have high melting and boiling points (c) Are hard substances because of strong covalent bonds (d) Are more soluble in non-polar solvents than in polar solvents

Last Answer : Ans:(d)

Why do alcohols have boiling points much higher than hydrocarbons of similar molecular weight? (a) Alcohols have greater van der Waals attraction forces. (b) Alcohol molecules have greater molecular symmetry. (c) Hydrogen bonds must be broken in the process of volatilization. (d) Alcohols must overcome greater ionic forces in the process of volatilization.

Description : Why do alcohols have boiling points much higher than hydrocarbons of similar molecular weight? (a) Alcohols have greater van der Waals attraction forces. (b) Alcohol molecules have greater ... of volatilization. (d) Alcohols must overcome greater ionic forces in the process of volatilization.

Last Answer : Hydrogen bonds must be broken in the process of volatilization

The theory of interionic attraction attributed to Debye and Hückel: w) was disproved by Arrhenius x) accounts quantitatively for the attraction between ions in dilute aqueous solutions y) does not account for kindered "ion-activity" z) accounts for intra-molecular polar bonds

Description : The theory of interionic attraction attributed to Debye and Hückel: w) was disproved by Arrhenius x) accounts quantitatively for the attraction between ions in dilute aqueous solutions y) does not account for kindered "ion-activity" z) accounts for intra-molecular polar bonds

Last Answer : ANSWER: X -- ACCOUNTS QUANTITATIVELY FOR THE ATTRACTION BETWEEN IONS IN DILUTE AQUEOUS SOLUTIONS

The melting and boiling points of ionic solids are (a) High (b) Low (c) Very low (d) Of intermediate range

Description : The melting and boiling points of ionic solids are (a) High (b) Low (c) Very low (d) Of intermediate range

Last Answer : Ans:(a)

How compared with the melting points of ionic compounds the melting points of molecular solids tend to be?

Description : How compared with the melting points of ionic compounds the melting points of molecular solids tend to be?

Last Answer : Ionic compounds have a higher melting point.

Which of the following is not a characteristic of organic compounds? (a) They usually have low melting points. (b) They usually are only slightly soluble or insoluble in water. (c) If water soluble they seldom conduct an electric current. (d) Bonds which bind the atoms together are nearly always ionic.

Description : Which of the following is not a characteristic of organic compounds? (a) They usually have low melting points. (b) They usually are only slightly soluble or insoluble in water. (c) If water ... they seldom conduct an electric current. (d) Bonds which bind the atoms together are nearly always ionic.

Last Answer : Bonds which bind the atoms together are nearly always ionic.

Choose the incorrect statement pertaining to organic compounds (1) They have low melting and boiling points (2) They do not dissolve in water (3) They are not easily combustible (4) They contain mainly carbon and hydrogen

Description : Choose the incorrect statement pertaining to organic compounds (1) They have low melting and boiling points (2) They do not dissolve in water (3) They are not easily combustible (4) They contain mainly carbon and hydrogen

Last Answer : They are not easily combustible

Which of the following is false? (1) Most carbon compounds are poor conductors of electricity. (2) The force of attraction between carbon molecules is not very strong. (3) The atomic number of carbon is 6. (4) The earth’s crust has about 2% carbon in the form of minerals.

Description : Which of the following is false? (1) Most carbon compounds are poor conductors of electricity. (2) The force of attraction between carbon molecules is not very strong. (3) The atomic number of carbon is 6. (4) The earth’s crust has about 2% carbon in the form of minerals.

Last Answer : (4) The earth’s crust has about 2% carbon in the form of minerals.

Can ionic substances have high or low melting points?

Description : Can ionic substances have high or low melting points?

Last Answer : Generally ionic substances have high melting and boiling points.

The boiling points of the halogens increase going from F2 to I2. What type of intermolecular forces are responsible for this trend? w) permanent dipole x) hydrogen bonding y) ion-ion attraction z) London dispersion forces

Description : The boiling points of the halogens increase going from F2 to I2. What type of intermolecular forces are responsible for this trend? w) permanent dipole x) hydrogen bonding y) ion-ion attraction z) London dispersion forces

Last Answer : ANSWER: Z -- LONDON DISPERSION FORCES

Water is a good solvent of ionic salts because - (1) It has no colour (2) It has a boiling point (3) It has a high dipole moment (4) It has a high specific heat

Description : Water is a good solvent of ionic salts because - (1) It has no colour (2) It has a boiling point (3) It has a high dipole moment (4) It has a high specific heat

Last Answer : (3) It has a high dipole moment

What are melting points and boiling points ? What is melting point and boiling point ?

Description : What are melting points and boiling points ? What is melting point and boiling point ?

Last Answer : Melting point refers to the process of melting a solid into a liquid at a certain temperature. Boiling point is the temperature at which a liquid evaporates. Therefore , the temperature at which a liquid begins to evaporate is called the 'boiling point' of that substance.

The points noted by arrows are melting and boiling points of the metal zinc and magnasium. `Delta G^(0)` as a function of temperature for some reactio

Description : The points noted by arrows are melting and boiling points of the metal zinc and magnasium. `Delta G^(0)` as a function of temperature for some reactio

Last Answer : The points noted by arrows are melting and boiling points of the metal zinc and magnasium. `Delta G^(0)` ... +Zn rarr Mg+ZnO` D. `ZnO+Mg rarrZn+MgO`

The points noted by arrows are melting and boiling points of the metal zinc and magnasium. `Delta G^(0)` as a function of temperature for some reactio

Description : The points noted by arrows are melting and boiling points of the metal zinc and magnasium. `Delta G^(0)` as a function of temperature for some reactio

Last Answer : The points noted by arrows are melting and boiling points of the metal zinc and magnasium. `Delta G^(0)` as a ... gt 500^(@)C " but " lt 1000^(@)C`

The points noted by arrows are melting and boiling points of the metal zinc and magnasium. `Delta G^(0)` as a function of temperature for some reactio

Description : The points noted by arrows are melting and boiling points of the metal zinc and magnasium. `Delta G^(0)` as a function of temperature for some reactio

Last Answer : The points noted by arrows are melting and boiling points of the metal zinc and magnasium. `Delta G^(0)` as a ... C. `500^(@)C` D. `1200^(@)C`

Which statements about alkenes and alkanes of corresponding chain lengths is true? (I) Alkenes have slightly lower melting points than alkanes (II) Alkenes have slightly higher melting points than alkanes (III) Alkenes have higher boiling points than alkanes (IV) Alkenes have lower boiling points than alkanes (a) I and III (b) II and IV (c) I and IV (d) II and III

Description : Which statements about alkenes and alkanes of corresponding chain lengths is true? (I) Alkenes have slightly lower melting points than alkanes (II) Alkenes have slightly higher melting points than alkanes (III) Alkenes have higher boiling ... (a) I and III (b) II and IV (c) I and IV (d) II and III

Last Answer : I and III

Melting point & boiling points of liquid oxygen are respectively - 218.8°C & - 183°C, while the same for liquid nitrogen is - 210°C & - 195.8°C respectively. The difference in melting points of liquid oxygen & liquid nitrogen is not equal to 8.8 (A) °C (B) °F (C) °K (D) °R

Description : Melting point & boiling points of liquid oxygen are respectively - 218.8°C & - 183°C, while the same for liquid nitrogen is - 210°C & - 195.8°C respectively. The difference in melting points of liquid oxygen & liquid nitrogen is not equal to 8.8 (A) °C (B) °F (C) °K (D) °R

Last Answer : (B) °F

Define intermolecular forces. Also write down effect of intermolecular forces on melting points & boiling points of substances?

Description : Define intermolecular forces. Also write down effect of intermolecular forces on melting points & boiling points of substances?

Last Answer : The forces of attraction present between the molecules of a compound are called Intermolecular forces''. Effect of intermolecular forces on the m.p and b.p of substances If intermolecular forces of attractions in ... . And if these forces are weak then the m.p and b.p will be relatively lower.

Carbon compounds have usually low melting points and

Description : Carbon compounds have usually low melting points and

Last Answer : boiling points.

Why do covalent compounds have low melting points?

Description : Why do covalent compounds have low melting points?

Last Answer : Because although the covalent bonds between the elements are strong, there are only weak forces between the molecules so they have low melting points

Why do covalent compounds have low melting points?

Description : Why do covalent compounds have low melting points?

Last Answer : Because although the covalent bonds between the elements are strong, there are only weak forces between the molecules so they have low melting points

What property of low-molecular weight aldehydes and ketones accounts for the magnitude of their boiling points? (a) The ability to form strong H-bonds between their molecules. (b) The ability of the carbonyl oxygen to form H-bonds with other carbonyl groups. (c) The ability of the polar carbonyl group to attract other polar molecules. (d) The ability of the carbonyl group to attract electrophiles and form bonds.

Description : What property of low-molecular weight aldehydes and ketones accounts for the magnitude of their boiling points? (a) The ability to form strong H-bonds between their molecules. (b) The ability of ... other polar molecules. (d) The ability of the carbonyl group to attract electrophiles and form bonds.

Last Answer : The ability of the polar carbonyl group to attract other polar molecules.

. A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of all the effects is -less than that in a single effect evaporator system (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect (C) Boiling point elevation in a single effect system is much higher than that in any effect in a multi-effect system (D) Heat transfer co-efficient in a single effect is much lower than that in any effect in a multi-effect system

Description : . A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of ... in a single effect is much lower than that in any effect in a multi-effect system

Last Answer : (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect

Which of the following compounds has the lowest boiling points? w) CH4 x) CCl4 y) PH3 z) PCl3

Description : Which of the following compounds has the lowest boiling points? w) CH4 x) CCl4 y) PH3 z) PCl3

Last Answer : ANSWER: W -- CH4

A bond in which there is an unequal attraction for the shared electrons and a resultant unbalanced distribution of charge is which one of the following types of bonds? w) ionic x) pure covalent y) nonpolar covalent z) polar covalent

Description : A bond in which there is an unequal attraction for the shared electrons and a resultant unbalanced distribution of charge is which one of the following types of bonds? w) ionic x) pure covalent y) nonpolar covalent z) polar covalent 

Last Answer : ANSWER: Z -- POLAR COVALENT 

At hill stations, the boiling point of water will be – (1) same as at sea level (2) less than that at sea level (3) more than that at sea level (4) equal to the melting point of ice

Description : At hill stations, the boiling point of water will be – (1) same as at sea level (2) less than that at sea level (3) more than that at sea level (4) equal to the melting point of ice

Last Answer : (2) less than that at sea level Explanation: The boiling point is the temperature at which the vapour pressure of the liquid equals the environmental pressure surrounding the liquid. Atmospheric pressure ... The atmospheric pressure at high altitudes like hill station is less than at the sea level.

At hill stations, the boiling point of water will be (1) same as at sea level (2) less than that at sea level (3) more than that at sea level (4) equal to the melting point of ice

Description : At hill stations, the boiling point of water will be (1) same as at sea level (2) less than that at sea level (3) more than that at sea level (4) equal to the melting point of ice 

Last Answer : less than that at sea level

Have you ever had strong sexual chemistry with someone and no physical attraction?

Description : Have you ever had strong sexual chemistry with someone and no physical attraction?

Last Answer : Yes, it has happened with me!

Diamond is hard because (a) It has strong covalent bonds (b) Discrete molecules of carbon are held by strong Vander Waal’s forces (c) It involves Van der Waal's forces (d) Covalent bonds are directional unlike ionic bonds

Description : Diamond is hard because (a) It has strong covalent bonds (b) Discrete molecules of carbon are held by strong Vander Waal’s forces (c) It involves Van der Waal's forces (d) Covalent bonds are directional unlike ionic bonds

Last Answer : Ans:(a)

Give reason .the compounds of alkaline earth metals are less ionic than alkali metals

Description : Give reason .the compounds of alkaline earth metals are less ionic than alkali metals

Last Answer : Ans This is due to increased nuclear charge and smaller size.

Give reason .the compounds of alkaline earth metals are less ionic than alkali metals

Description : Give reason .the compounds of alkaline earth metals are less ionic than alkali metals

Last Answer : This is due to increased nuclear charge and smaller size. 

Change in volume of metals from absolute zero temperature to their melting points is (A) Almost same for all metals (B) Different for different metals (C) Less for low melting point metals (D) Less for high melting point metals

Description : Change in volume of metals from absolute zero temperature to their melting points is (A) Almost same for all metals (B) Different for different metals (C) Less for low melting point metals (D) Less for high melting point metals

Last Answer : (A) Almost same for all metals

Glycerine is used as a coolant in cooling of some engines instead of water, because (A) Its higher boiling point (290°C) increases its heat carrying capacity (B) Comparatively less weight of coolant is required (C) Smaller radiator can be used (D) All a, b & c

Description : Glycerine is used as a coolant in cooling of some engines instead of water, because (A) Its higher boiling point (290°C) increases its heat carrying capacity (B) Comparatively less weight of coolant is required (C) Smaller radiator can be used (D) All a, b & c

Last Answer : (D) All a, b & c

The force responsible for drops of liquid assuming a spherical shape is known as: w) strong nuclear force x) Van der Waals attraction y) surface tension z) osmotic pressure

Description : The force responsible for drops of liquid assuming a spherical shape is known as: w) strong nuclear force x) Van der Waals attraction y) surface tension z) osmotic pressure

Last Answer : ANSWER: Y -- SURFACE TENSION

Metals have ______. (1) High melting and boiling point (2) Low melting and boiling point (3) High melting and low boiling point (4) Low melting and high boiling point

Description : Metals have ______. (1) High melting and boiling point (2) Low melting and boiling point (3) High melting and low boiling point (4) Low melting and high boiling point

Last Answer : (1) High melting and boiling point

What is the extremely large amount of energy associated with the strong bonds within the nucleus of the atom itself called?  A. Chemical energy  B. Latent energy  C. Phase energy  D. Nuclear energy

Description : What is the extremely large amount of energy associated with the strong bonds within the nucleus of the atom itself called?  A. Chemical energy  B. Latent energy  C. Phase energy  D. Nuclear energy

Last Answer : Nuclear energy

Nickel-cadmium batteries are superior to lead-acid batteries at high discharge rates because they _______________. A. deliver a large amount of power and can be recharged in a shorter time B. need fewer cells in connected series and less mounting space C. have higher output voltages and require no maintenance D. all of the above

Description : Nickel-cadmium batteries are superior to lead-acid batteries at high discharge rates because they _______________. A. deliver a large amount of power and can be recharged in a shorter time B. need ... less mounting space C. have higher output voltages and require no maintenance D. all of the above

Last Answer : Answer: A

Asphalts are(A) Low molecular weight & low boiling point compounds present in petroleum (B) Desirable in catalytic cracking feedstock, because they produce coke (C) Readily oxidisable and form carbonaceous sludge (D) All (A), (B) & (C)

Description : Asphalts are (A) Low molecular weight & low boiling point compounds present in petroleum (B) Desirable in catalytic cracking feedstock, because they produce coke (C) Readily oxidisable and form carbonaceous sludge (D) All (A), (B) & (C)

Last Answer : (C) Readily oxidisable and form carbonaceous sludge

Suggest a reason for the large difference in the boiling points of butanol and butanal, although they have same solubility in water.

Description : Suggest a reason for the large difference in the boiling points of butanol and butanal, although they have same solubility in water.

Last Answer : The b. pt. of butanol is higher than that of butanal because butanol has strong intermolecular H-bonding while butanal has weak dipole-dipole interaction. However both of them form H-bonds with water and hence are soluble.

How much amount of energy is required to break the Triple bond in nitrogen molecule ?

Description : How much amount of energy is required to break the Triple bond in nitrogen molecule ?

Last Answer : 225 Kcal/mole or 945.4 KJ/mole

A large iceberg melts at the base, but not at the top, because of the reason that (A) Ice at the base contains impurities which lowers its melting point (B) Due to the high pressure at the base, its melting point reduces (C) The iceberg remains in a warmer condition at the base (D) All (A), (B) and (C)

Description : A large iceberg melts at the base, but not at the top, because of the reason that (A) Ice at the base contains impurities which lowers its melting point (B) Due to the high pressure at the base, its melting point ... C) The iceberg remains in a warmer condition at the base (D) All (A), (B) and (C)

Last Answer : (B) Due to the high pressure at the base, its melting point reduces

Agar is used for solidifying culture media because A-it does not affect by the growth of bacteria B-it does not add to the nutritive properties of the medium C-the melting and solidifying points of agar solution are not the same D-all of the above

Description : Agar is used for solidifying culture media because A-it does not affect by the growth of bacteria B-it does not add to the nutritive properties of the medium C-the melting and solidifying points of agar solution are not the same D-all of the above

Last Answer : all of the above

Why do trans isomers of alkenes have lower boiling points than cis isomers? (a) trans isomers have better symmetry (b) cis isomers have better symmetry (c) trans isomers are less polar (d) cis isomers are less polar

Description : Why do trans isomers of alkenes have lower boiling points than cis isomers? (a) trans isomers have better symmetry (b) cis isomers have better symmetry (c) trans isomers are less polar (d) cis isomers are less polar

Last Answer : trans isomers are less polar

Is it true both ionic and covalent bonds between molecules are very strong?

Description : Is it true both ionic and covalent bonds between molecules are very strong?

Last Answer : Both ionic and covalent bonds are between atoms.

In 2-butene, which of the following bonds prevents the atoms at each end of the bond from rotating with respect to each other. Is it an: w) ionic bond x) sigma bond y) strong bond z) double bond

Description : In 2-butene, which of the following bonds prevents the atoms at each end of the bond from rotating with respect to each other. Is it an: w) ionic bond x) sigma bond y) strong bond z) double bond

Last Answer : ANSWER: Z -- DOUBLE BOND

The point at which the solid, liquid and gaseous forms of a substance co-exist is called its (a) boiling point (b) melting point (c) triple point (d) freezing point

Description : The point at which the solid, liquid and gaseous forms of a substance co-exist is called its (a) boiling point (b) melting point (c) triple point (d) freezing point

Last Answer : Ans:(c)

The point at which the solid, liquid and gaseous forms of a substance co-exist is called its (a) Boiling point (b) Melting point (c) Triple point (d) Freezing point

Description : The point at which the solid, liquid and gaseous forms of a substance co-exist is called its (a) Boiling point (b) Melting point (c) Triple point (d) Freezing point

Last Answer : Ans:(c)

Define the term melting, boiling, evaporation, condensation, freezing.

Description : Define the term melting, boiling, evaporation, condensation, freezing.

Last Answer : ∗ Melting:- The temperature at which things melt is called melting. ∗ Boiling:- The temperature at which liquid things boil is called boiling point. ∗ Evaporation:- When water is heated, it changes into ... . ∗ Freezing. When water is cooled, it freezes into form of ice. This is called freezing.

Why does the temperature of a substance remain constant during its melting point or boiling point? -Maths 9th

Description : Why does the temperature of a substance remain constant during its melting point or boiling point? -Maths 9th

Last Answer : The extra heat supplied to the boiling water is used in the vaporization of a liquid, which is known as the latent heat of vaporization. That's why the temperature of a substance remains constant during its melting or boiling.

Why does the temperature of a substance remain constant during its melting point or boiling point? -Maths 9th

Description : Why does the temperature of a substance remain constant during its melting point or boiling point? -Maths 9th

Last Answer : The temperature of a substance remains constant during melting and boiling points till the completion of melting and boiling. It is because substance makes use of latent heat of fusion ... between particles of liquid to change into vapours during boiling. Therefore, temperature remains constant.