Critical value of the __________ number governs the transition from laminar to turbulent flow in free convection heat transfer. (A) Grashoff (B) Reynolds (C) Both 'a' & 'b' (D) Prandtl & Grashoff

Critical value of the __________ number governs the transition from
laminar to turbulent flow in free convection heat transfer.
(A) Grashoff
(B) Reynolds
(C) Both 'a' & 'b'
(D) Prandtl & Grashoff
by

1 Answer

Answer :

(D) Prandtl & Grashoff
by

Related questions

Transition from laminar to turbulent zone in free convection heat transfer is governed by the critical value of (A) Grashoff number (B) Grashoff number & Reynolds number (C) Reynolds number (D) Grashoff number & Prandtl number

Description : Transition from laminar to turbulent zone in free convection heat transfer is governed by the critical value of (A) Grashoff number (B) Grashoff number & Reynolds number (C) Reynolds number (D) Grashoff number & Prandtl number

Last Answer : Option D

When the ratio of the Grashoff number and to the square of Reynolds number is one, the dominant mechanism of heat transfer is: (A) Free convection (B) Entry length problem in laminar forced conduction (developing thermal boundary layer) (C) Mixed convection (both free and forced) (D) Forced convection

Description : When the ratio of the Grashoff number and to the square of Reynolds number is one, the dominant mechanism of heat transfer is: (A) Free convection (B) Entry length problem in laminar forced ... (developing thermal boundary layer) (C) Mixed convection (both free and forced) (D) Forced convection

Last Answer : (C) Mixed convection (both free and forced)

Nusselt number is related to Grashoff number (Gr) in turbulent & laminar flow respectively, in respect of free convection over a vertical flat plate as (A) Gr0.25, Gr (B) Gr0.25, Gr0.33 (C) Gr, Gr0.25 (D) Gr0.33, Gr0.25

Description : Nusselt number is related to Grashoff number (Gr) in turbulent & laminar flow respectively, in respect of free convection over a vertical flat plate as (A) Gr0.25, Gr (B) Gr0.25, Gr0.33 (C) Gr, Gr0.25 (D) Gr0.33, Gr0.25

Last Answer : Option A

Convective heat transfer co-efficient in case of fluid flowing in tubes is not affected by the tube length/diameter ratio, if the flow is in the __________ zone. (A) Laminar (B) Transition (C) Both 'a' & 'b' (D) Highly turbulent

Description : Convective heat transfer co-efficient in case of fluid flowing in tubes is not affected by the tube length/diameter ratio, if the flow is in the __________ zone. (A) Laminar (B) Transition (C) Both 'a' & 'b' (D) Highly turbulent

Last Answer : (D) Highly turbulent

Dittus-Boelter equation used for the determination of heat transfer co￾efficient is valid (A) For fluids in laminar flow (B) For fluids in turbulent flow (C) When Grashoff number is very important (D) For liquid metals

Description : Dittus-Boelter equation used for the determination of heat transfer co￾efficient is valid (A) For fluids in laminar flow (B) For fluids in turbulent flow (C) When Grashoff number is very important (D) For liquid metals

Last Answer : (B) For fluids in turbulent flow

Nusselt number (for forced convection heat transfer) is a function of the __________ number. (A) Prandtl (B) Reynolds (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Nusselt number (for forced convection heat transfer) is a function of the __________ number. (A) Prandtl (B) Reynolds (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Nusselt number is a function of Prandtl number and __________ number of fluid in natural convection heat transfer. (A) Grashoff (B) Biot (C) Stanton

Description : Nusselt number is a function of Prandtl number and __________ number of fluid in natural convection heat transfer. (A) Grashoff (B) Biot (C) Stanton

Last Answer : (A) Grashoff

Pick out the wrong statement pertaining to the analogy between equations of heat and mass transfer operations. (A) Sherwood number in mass transfer is analogous to Nusselt number in heat transfer (B) Prandtl number in heat transfer is analogous to Schmidt number in mass transfer (C) Reynolds number in mass transfer is analogous to Grashoff number in heat transfer (D) Reynolds number remains the same in both heat and mass transfer

Description : Pick out the wrong statement pertaining to the analogy between equations of heat and mass transfer operations. (A) Sherwood number in mass transfer is analogous to Nusselt number in heat transfer ... heat transfer (D) Reynolds number remains the same in both heat and mass transfer

Last Answer : (C) Reynolds number in mass transfer is analogous to Grashoff number in heat transfer

Which of the following is unimportant in forced convection? (A) Reynolds number (B) Prandtl number (C) Grashoff number (D) None of these

Description : Which of the following is unimportant in forced convection? (A) Reynolds number (B) Prandtl number (C) Grashoff number (D) None of these

Last Answer : (C) Grashoff number

Natural convection is characterised by (A) Grashoff number (B) Peclet number (C) Reynolds number (D) Prandtl number

Description : Natural convection is characterised by (A) Grashoff number (B) Peclet number (C) Reynolds number (D) Prandtl number

Last Answer : (A) Grashoff number

Maximum heat transfer rate is obtained in __________ flow. (A) Laminar (B) Turbulent (C) Creeping (D) Transition region

Description : Maximum heat transfer rate is obtained in __________ flow. (A) Laminar (B) Turbulent (C) Creeping (D) Transition region

Last Answer : (B) Turbulent

When the pipe Reynold's number is 6000, the flow is generally (A) Viscous(B) Laminar(C) Turbulent(D) Transition

Description : When the pipe Reynold's number is 6000, the flow is generally (A) Viscous (B) Laminar (C) Turbulent (D) Transition

Last Answer : (C) Turbulent

In turbulent flow, a rough pipe has the same friction factor as a smooth pipe (A) In the zone of complete turbulence (B) When the roughness projections are much smaller than the thickness of the laminar film (C) Everywhere in the transition zone (D) When the friction factor is independent of the Reynold's number

Description : In turbulent flow, a rough pipe has the same friction factor as a smooth pipe (A) In the zone of complete turbulence (B) When the roughness projections are much smaller than the thickness of ... ) Everywhere in the transition zone (D) When the friction factor is independent of the Reynold's number

Last Answer : (B) When the roughness projections are much smaller than the thickness of the laminar film

Pick out the wrong statement. (A) Mechanical agitation is required, if the system has low interfacial tension (B) Sieve tray towers are generally used for systems having low interfacial tension (C) When Henry's law constant is very small, then the mass transfer rate is controlled by the gas film resistance (D) Taylor-Prandtl analogy for heat and mass transfer considers the transfer through both laminar and turbulent layers

Description : Pick out the wrong statement. (A) Mechanical agitation is required, if the system has low interfacial tension (B) Sieve tray towers are generally used for systems having low ... Prandtl analogy for heat and mass transfer considers the transfer through both laminar and turbulent layers

Last Answer : (A) Mechanical agitation is required, if the system has low interfacial tension

jH factor for heat transfer is not a function of the __________ number. (A) Reynolds (B) Nusselt (C) Grashoff (D) Both (B) & (C)

Description : jH factor for heat transfer is not a function of the __________ number. (A) Reynolds (B) Nusselt (C) Grashoff (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

Nusselt number is related to the Reynolds number (Re) in turbulent & laminar flow respectively as (A) Re0.5, Re0.8 (B) Re0.8, Re-0.5 (C) Re0.8, Re0.5 (D) Re-0.8, Re0.5

Description : Nusselt number is related to the Reynolds number (Re) in turbulent & laminar flow respectively as (A) Re0.5, Re0.8 (B) Re0.8, Re-0.5 (C) Re0.8, Re0.5 (D) Re-0.8, Re0.5

Last Answer : (C) Re0.8, Re0.5

Fanning equation is given by (∆P/ρ) = 4f (L/D) (v 2 /2gc ). It is applicable to __________ region flow. (A) Transition (B) Laminar (C) Turbulent (D) Both (B) and (C)

Description : Fanning equation is given by (∆P/ρ) = 4f (L/D) (v 2 /2gc ). It is applicable to __________ region flow. (A) Transition (B) Laminar (C) Turbulent (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Pick out the wrong statement. (A) In drying a solid containing moisture above the critical moisture content the number of degrees of freedom is 2 (B) Sherwood number in mass transfer corresponds to Nusselt number in heat transfer and Schmidt number to Prandtl number (C) Forced convection is relatively more effective in increasing the rate of mass transfer, if Schmidt number is larger (D) Hot gases at moderate pressure are usually in the shell side of shell and tube heat exchangers. At higher pressure, however, it is customary to put gas in the tube side

Description : Pick out the wrong statement. (A) In drying a solid containing moisture above the critical moisture content the number of degrees of freedom is 2 (B) Sherwood number in mass transfer corresponds to ... tube heat exchangers. At higher pressure, however, it is customary to put gas in the tube side

Last Answer : (C) Forced convection is relatively more effective in increasing the rate of mass transfer, if Schmidt number is larger

Maximum heat transfer rate is achieved in __________ flow. (A) Co-current (B) Counter-current (C) Turbulent (D) Laminar

Description : Maximum heat transfer rate is achieved in __________ flow. (A) Co-current (B) Counter-current (C) Turbulent (D) Laminar

Last Answer : (C) Turbulen

Transition from laminar flow to turbulent flow is aided by the (A) Surface roughness and curvature (i.e. sharp corners) (B) Vibration (C) Pressure gradient and the compressibility of the flowing medium (D) All (A), (B) & (C)

Description : Transition from laminar flow to turbulent flow is aided by the (A) Surface roughness and curvature (i.e. sharp corners) (B) Vibration (C) Pressure gradient and the compressibility of the flowing medium (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Heat transfer co-efficient equation for forced convection, Nu = 0.023 Re 0.8 . Pr n , is not valid, if the value of (A) n = 0.4 is used for heating (B) n = 0.3 is used for cooling (C) Reynolds number for the flow involved is > 10000 (D) Reynolds number for the flow involved is < 2100

Description : Heat transfer co-efficient equation for forced convection, Nu = 0.023 Re 0.8 . Pr n , is not valid, if the value of (A) n = 0.4 is used for heating (B) n = 0.3 is used for cooling (C) Reynolds number for the flow involved is > 10000 (D) Reynolds number for the flow involved is < 2100

Last Answer : (D) Reynolds number for the flow involved is < 2100

jH factor for heat transfer depends upon the __________ number. (A) Biot (B) Nusselt (C) Reynolds (D) Prandtl

Description : jH factor for heat transfer depends upon the __________ number. (A) Biot (B) Nusselt (C) Reynolds (D) Prandtl

Last Answer : (C) Reynolds

Heat transfer by conduction in the turbulent core of a fluid flowing through a heated pipe is negligible, if the value of Prandtl number is (A) 0.2 (B) 0.4 (C) 0.6 (D) 0.8

Description : Heat transfer by conduction in the turbulent core of a fluid flowing through a heated pipe is negligible, if the value of Prandtl number is (A) 0.2 (B) 0.4 (C) 0.6 (D) 0.8

Last Answer : (C) 0.6

The Graetz number is concerned with the (A) Mass transfer between a gas and a liquid (B) Absorption with chemical reaction (C) Heat transfer in turbulent flow (D) Heat transfer in laminar flow

Description : The Graetz number is concerned with the (A) Mass transfer between a gas and a liquid (B) Absorption with chemical reaction (C) Heat transfer in turbulent flow (D) Heat transfer in laminar flow

Last Answer : (D) Heat transfer in laminar flow

The Sieder-Tate correlation for heat transfer in turbulent flow in pipe gives Nu α Re 0.8 , where, Nu is the Nusselt number and Re is the Reynolds number for the flow. Assuming that this relation is valid, the heat transfer co-efficient varies with the pipe diameter (D) as (A) D-1.8 (B) D-0.2 (C) D0.2 (D) D1.8

Description : The Sieder-Tate correlation for heat transfer in turbulent flow in pipe gives Nu α Re 0.8 , where, Nu is the Nusselt number and Re is the Reynolds number for the flow. Assuming that this relation is valid, the heat transfer co-efficient ... pipe diameter (D) as (A) D-1.8 (B) D-0.2 (C) D0.2 (D) D1.8

Last Answer : (B) D-0.2

Transition from laminar flow to turbulent flow in fluid flow through a pipe does not depend upon the (A) Length of the pipe (B) Diameter of the pipe (C) Density of the fluid (D) Velocity of the fluid

Description : Transition from laminar flow to turbulent flow in fluid flow through a pipe does not depend upon the (A) Length of the pipe (B) Diameter of the pipe (C) Density of the fluid (D) Velocity of the fluid

Last Answer : (A) Length of the pipe

The Dittus-Boelter equation for convective heat transfer [(i.e. h = 0.023 (K/D) (Re) 0.8 (Pr) 0.4 ] cannot be used for (A) Low Reynold's number (B) Very low Grashoff number (C) Molten metals (D) All (A), (B) and (C)

Description : The Dittus-Boelter equation for convective heat transfer [(i.e. h = 0.023 (K/D) (Re) 0.8 (Pr) 0.4 ] cannot be used for (A) Low Reynold's number (B) Very low Grashoff number (C) Molten metals (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In natural convection heat transfer, the correlating parameter is the (A) Graetz number (B) Eckert number (C) Grashoff number (D) Bond number

Description : In natural convection heat transfer, the correlating parameter is the (A) Graetz number (B) Eckert number (C) Grashoff number (D) Bond number

Last Answer : (C) Grashoff number

Pick out the correct statement. (A) 1 kcal/hr.m.°C is equal to 1 BTU/hr. ft.°F (B) In steady state heat conduction, the only property of the substance which determines the temperature distribution, is the thermal conductivity (C) In unsteady state heat conduction, heat flows in the direction of temperature rise (D) In heat transfer by forced convection, Grashoff number is very important

Description : Pick out the correct statement. (A) 1 kcal/hr.m.°C is equal to 1 BTU/hr. ft.°F (B) In steady state heat conduction, the only property of the substance which determines the ... in the direction of temperature rise (D) In heat transfer by forced convection, Grashoff number is very important

Last Answer : (B) In steady state heat conduction, the only property of the substance which determines the temperature distribution, is the thermal conductivity

The velocity at which the flow changes from laminar flow to turbulent flow is called (A) Critical velocity (B) Velocity of approach (C) Sub-sonic velocity (D) Super-sonic velocity

Description : The velocity at which the flow changes from laminar flow to turbulent flow is called (A) Critical velocity (B) Velocity of approach (C) Sub-sonic velocity (D) Super-sonic velocity

Last Answer : Answer: Option A

The ratio of momentum diffusivity to thermal diffusivity is the __________ number. (A) Prandtl (B) Nusselt (C) Stanton (D) Grashoff

Description : The ratio of momentum diffusivity to thermal diffusivity is the __________ number. (A) Prandtl (B) Nusselt (C) Stanton (D) Grashoff

Last Answer : (A) Prandtl

Cpµ/K is termed as the __________ number. (A) Grashoff (B) Nusselt (C) Prandtl (D) Stanton

Description : Cpµ/K is termed as the __________ number. (A) Grashoff (B) Nusselt (C) Prandtl (D) Stanton

Last Answer : (C) Prandtl

In turbulent flow, the (A) Fluid particles move in an orderly manner (B) Momentum transfer is on molecular scale only (C) Shear stress is caused more effectively by cohesion than momentum transfer (D) Shear stresses are generally larger than in a similar laminar flow

Description : In turbulent flow, the (A) Fluid particles move in an orderly manner (B) Momentum transfer is on molecular scale only (C) Shear stress is caused more effectively by cohesion than momentum transfer (D) Shear stresses are generally larger than in a similar laminar flow

Last Answer : (D) Shear stresses are generally larger than in a similar laminar flow

Fanning friction factor for laminar flow of fluid in a circular pipe is (A) Not a function of the roughness of pipe wall (B) Inversely proportional to Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Fanning friction factor for laminar flow of fluid in a circular pipe is (A) Not a function of the roughness of pipe wall (B) Inversely proportional to Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Isothermal turbulent flow of a fluid results in decrease of its pressure, which depends on the (A) Wall roughness (B) Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Isothermal turbulent flow of a fluid results in decrease of its pressure, which depends on the (A) Wall roughness (B) Reynolds number (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The distribution of shear stress in a stream of fluid in a circular tube is(A) Linear with radius for turbulent flow only(B) Linear with radius for laminar flow only(C) Linear with radius for both laminar & turbulent flow(D) Parabolic with radius for both laminar & turbulent flow

Description : The distribution of shear stress in a stream of fluid in a circular tube is (A) Linear with radius for turbulent flow only (B) Linear with radius for laminar flow only (C) Linear with radius for both laminar & turbulent flow (D) Parabolic with radius for both laminar & turbulent flow

Last Answer : (C) Linear with radius for both laminar & turbulent flow

Heat transfer in the laminar sub-layer in case of a liquid flowing through a pipe, is mostly by (A) Eddies current (B) Conduction (C) Convection (D) None of these

Description : Heat transfer in the laminar sub-layer in case of a liquid flowing through a pipe, is mostly by (A) Eddies current (B) Conduction (C) Convection (D) None of these

Last Answer : (B) Conduction

Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads (D) Fanning friction factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads

Laminar flow region is said to exist during agitation of a liquid in an agitator, when the value of Reynolds number is (A) > 10 (B) < 10 (C) > 100 (D) < 100

Description : Laminar flow region is said to exist during agitation of a liquid in an agitator, when the value of Reynolds number is (A) > 10 (B) < 10 (C) > 100 (D) < 100

Last Answer : (B) < 10

In case of a plate and frame filter press, filtrate flow through the cake follows __________ flow. (A) Plug (B) Turbulent (C) Laminar (D) None of these

Description : In case of a plate and frame filter press, filtrate flow through the cake follows __________ flow. (A) Plug (B) Turbulent (C) Laminar (D) None of these

Last Answer : (C) Laminar

A straight line is obtained on plotting reciprocal of filtration rate vs. the volume of filtrate for __________ flow of filtrate. (A) Compressible cakes and laminar (B) Incompressible cake and laminar (C) Compressible cake and turbulent (D) Incompressible cake and turbulent

Description : A straight line is obtained on plotting reciprocal of filtration rate vs. the volume of filtrate for __________ flow of filtrate. (A) Compressible cakes and laminar (B) Incompressible cake and laminar (C) Compressible cake and turbulent (D) Incompressible cake and turbulent

Last Answer : (B) Incompressible cake and laminar

Pick out the correct statement. (A) A forced vortex occurs when fluid rotates as a solid about an axis (B) In laminar flow, Newton's law of viscosity does not apply (C) A free vortex occurs, when fluid rotates as a solid (D) In turbulent flow, there are neither cross-currents nor eddies

Description : Pick out the correct statement. (A) A forced vortex occurs when fluid rotates as a solid about an axis (B) In laminar flow, Newton's law of viscosity does not apply (C) A free vortex occurs, when fluid rotates as a solid (D) In turbulent flow, there are neither cross-currents nor eddies

Last Answer : (A) A forced vortex occurs when fluid rotates as a solid about an axis

Pick out the wrong statement. (A) A fluid mass is free from shearing forces, when it is made to rotate with a uniform velocity(B) Newton's law of viscosity is not applicable to the turbulent flow of fluidwith linear velocity distribution(C) Laminar flow of viscous liquids is involved in the lubrication of varioustypes of bearings(D) Rise of water in capillary tubes reduces with the increasing diameter ofcapillary tubes

Description : Pick out the wrong statement. (A) A fluid mass is free from shearing forces, when it is made to rotate with a uniform velocit (B) Newton's law of viscosity is not applicable to the ... types of bearings (D) Rise of water in capillary tubes reduces with the increasing diameter of capillary tubes

Last Answer : (B) Newton's law of viscosity is not applicable to the turbulent flow of fluid with linear velocity distribution

Dittus-Boelter equation cannot be used for molten metals mainly due to its very low (A) Prandtl number (B) Grashoff number (C) Thermal conductivity (D) Viscosity

Description : Dittus-Boelter equation cannot be used for molten metals mainly due to its very low (A) Prandtl number (B) Grashoff number (C) Thermal conductivity (D) Viscosity

Last Answer : (A) Prandtl number

The Prandtl mixing length is (A) Zero at the pipe wall and is a universal constant (B) Independent of radial distance from the pipe axis (C) Independent of the shear stress (D) Useful for computing laminar flow problems

Description : The Prandtl mixing length is (A) Zero at the pipe wall and is a universal constant (B) Independent of radial distance from the pipe axis (C) Independent of the shear stress (D) Useful for computing laminar flow problems

Last Answer : (D) Useful for computing laminar flow problems

Prandtl mixing length is (A) Applicable to laminar flow problems (B) A universal constant (C) Zero at the pipe wall (D) None of these

Description : Prandtl mixing length is (A) Applicable to laminar flow problems (B) A universal constant (C) Zero at the pipe wall (D) None of these

Last Answer : (C) Zero at the pipe wall

The Reynolds number of the liquid was increased 100 fold for a laminar falling film used for gas-liquid contacting. Assuming penetrating theory is applicable, the fold increase in the mass transfer co-efficient (Kc ) for the same system is(A) 100(B) 10(C) 5(D) 1.

Description : The Reynolds number of the liquid was increased 100 fold for a laminar falling film used for gas-liquid contacting. Assuming penetrating theory is applicable, the fold increase in the mass transfer co-efficient (Kc ) for the same system is. (A) 100 (B) 10 (C) 5 (D) 1

Last Answer : (B) 10

For turbulent mass transfer in pipes, the Sherwood number depends on the Reynolds number as (A) Re 0.33 (B) Re 0.53 (C) Re 0.83 (D) Re

Description : For turbulent mass transfer in pipes, the Sherwood number depends on the Reynolds number as (A) Re 0.33 (B) Re 0.53 (C) Re 0.83 (D) Re

Last Answer : (C) Re 0.83

The inside heat transfer co-efficient in case of turbulent flow of liquid in the tube side in a 1-2 shell and tube heat exchanger is increased by __________ times, when the number of tube passes is increased to 8. (A) 2 0.8 (B) 4 0.8 (C) 4 0.4 (D) 2 0.4

Description : The inside heat transfer co-efficient in case of turbulent flow of liquid in the tube side in a 1-2 shell and tube heat exchanger is increased by __________ times, when the number of tube passes is increased to 8. (A) 2 0.8 (B) 4 0.8 (C) 4 0.4 (D) 2 0.4

Last Answer : (B) 4 0.8