In vibration isolation system, if ω/ωn, then the phase difference between the transmitted force and the disturbing force is A 0° B 90° C 180° D 270°

In vibration isolation system, if ω/ωn, then the phase difference between the
transmitted force and the disturbing force is
A 0°
B 90°
C 180°
D 270°
by

1 Answer

Answer :

C 180°
by

Related questions

In vibration isolation system, if ω/ω n > 1, then the phase difference between the transmitted force and the disturbing force is A. 0° B. 90° C. 180° D. 270°

Description : In vibration isolation system, if ω/ω n > 1, then the phase difference between the transmitted force and the disturbing force is A. 0° B. 90° C. 180° D. 270°

Last Answer : C. 180°

In vibration isolation system, if ω/ω n , then the phase difference between the transmitted force and the disturbing force is a) 0° b) 90° c) 180° d) 270°

Description : In vibration isolation system, if ω/ω n , then the phase difference between the transmitted force and the disturbing force is a) 0° b) 90° c) 180° d) 270°

Last Answer : c) 180°

In vibration isolation system, if ω/ω n > 1, then the phase difference between the transmitted force and the disturbing force is a) 0° b) 90° c) 180° d) 270°

Description : In vibration isolation system, if ω/ω n > 1, then the phase difference between the transmitted force and the disturbing force is a) 0° b) 90° c) 180° d) 270°

Last Answer : c) 180°

In vibration isolation system, if ω/ω n , then the phase difference between the transmitted force and the disturbing force is a) 0° b) 90° c) 180° d) 270

Description : In vibration isolation system, if ω/ω n , then the phase difference between the transmitted force and the disturbing force is a) 0° b) 90° c) 180° d) 270

Last Answer : c) 180°

If isolation factor is negative, then what is the phase difference between transmitted and disturbing force? a) 180° b) 90° c) 450° d) 360°

Description : If isolation factor is negative, then what is the phase difference between transmitted and disturbing force? a) 180° b) 90° c) 450° d) 360°

Last Answer : a) 180°

In vibration isolation system, if ω/ωn < 2, then for all values of damping factor, the transmissibility will be A less than unity B equal to unity C greater than unity D zero

Description : In vibration isolation system, if ω/ωn < 2, then for all values of damping factor, the transmissibility will be A less than unity B equal to unity C greater than unity D zero

Last Answer : C greater than unity

In vibration isolation system, the transmissibility will be equal to unity, for all values of damping factor, if ω/ωn is A. Equal to 1 B. Equal to √2 C. Less than √2 D. Greater than √2

Description : In vibration isolation system, the transmissibility will be equal to unity, for all values of damping factor, if ω/ωn is A. Equal to 1 B. Equal to √2 C. Less than √2 D. Greater than √2

Last Answer : B. Equal to √2

The condition to be fulfilled in the design of spring for vibration isolation of a system where excitation is due to a rotating unbalance is A) ω << ωn B) ω = ωn C) ω > ωn D) ω >> ωn

Description : The condition to be fulfilled in the design of spring for vibration isolation of a system where excitation is due to a rotating unbalance is A) ω ωn D) ω >> ωn

Last Answer : A) ω

The response of a damped forced vibration system A) Leads the system excitation ( for all values of ω/ ωn) B) Lags the system excitation ( for all values of ω/ ωn) C) Leads the system excitation ( for all values of ω/ ωn << 1)

Description : The response of a damped forced vibration system A) Leads the system excitation ( for all values of ω/ ωn) B) Lags the system excitation ( for all values of ω/ ωn) C) Leads the system excitation ( for all values of ω/ ωn

Last Answer : B) Lags the system excitation ( for all values of ω/ ωn)

In vibration isolation system, if ω/ω n < 2, then for all values of damping factor, the transmissibility will be a) less than unity b) equal to unity c) greater than unity d) zero

Description : In vibration isolation system, if ω/ω n < 2, then for all values of damping factor, the transmissibility will be a) less than unity b) equal to unity c) greater than unity d) zero

Last Answer : c) greater than unity

In vibration isolation system, if ω/ω n < 2, then for all values of damping factor, the transmissibility will be a) less than unity b) equal to unity c) greater than unity d) zero

Description : In vibration isolation system, if ω/ω n < 2, then for all values of damping factor, the transmissibility will be a) less than unity b) equal to unity c) greater than unity d) zero

Last Answer : c) greater than unity

n vibration isolation system, if ω/ω n is less than √2 , then for all values of the damping factor, the transmissibility will be a) less than unity b) equal to unity c) greater than unity d) zero

Description : n vibration isolation system, if ω/ω n is less than √2 , then for all values of the damping factor, the transmissibility will be a) less than unity b) equal to unity c) greater than unity d) zero

Last Answer : c) greater than unity

If ωmax is the frequency at which the peak amplitude occurs and ωn is the natural frequency of the system then In a forced vibration system with damping, the higher the damping, A) More will be the difference between ωn and ωmax B) Less will be the difference between ωn and ωmax C) The difference of ωn and ωmax is independent of damping in this system D) The difference between ωn and ωmax will be zero

Description : If ωmax is the frequency at which the peak amplitude occurs and ωn is the natural frequency of the system then In a forced vibration system with damping, the higher the damping, A) More will be ... and ωmax is independent of damping in this system D) The difference between ωn and ωmax will be zero

Last Answer : A) More will be the difference between ωn and ωmax

What is the phase relationship of the signal at the collector of Q2 to the signal at the collector of Q, A) 0° B) 90° C) 180° D) 360°.

Description : What is the phase relationship of the signal at the collector of Q2 to the signal at the collector of Q, A) 0° B) 90° C) 180° D) 360°.

Last Answer : C) 180°

The natural frequency of torsional vibration is given by A) ωn = (-kt)/I B) ωn = kt/I C) ωn = √(kt/I) D) ωn = √(2&kt/I)

Description : The natural frequency of torsional vibration is given by A) ωn = (-kt)/I B) ωn = kt/I C) ωn = √(kt/I) D) ωn = √(2&kt/I)

Last Answer : C) ωn = √(kt/I)

Number of degree a complete circle represents is A. 90° B. 180° C. 270° D. 360°

Description : Number of degree a complete circle represents is A. 90° B. 180° C. 270° D. 360°

Last Answer : 360°

Back bearing of a line is equal to (A) Fore bearing ± 90° (B) Fore bearing ± 180° (C) Fore bearing ± 360° (D) Fore bearing ± 270°

Description : Back bearing of a line is equal to (A) Fore bearing ± 90° (B) Fore bearing ± 180° (C) Fore bearing ± 360° (D) Fore bearing ± 270°

Last Answer : (B) Fore bearing ± 180°

An angle of deflection right, may be directly obtained by setting the instrument to read (A) Zero on back station (B) 180° on back station (C) 90° (D) 270° on back station

Description : An angle of deflection right, may be directly obtained by setting the instrument to read (A) Zero on back station (B) 180° on back station (C) 90° (D) 270° on back station

Last Answer : (A) Zero on back station

A turbine is said to have an axial discharge when the steam leaves the blade tip at _________ to the direction of the blade motion. (A) 60° (B) 90° (C) 180° (D) 270°

Description : A turbine is said to have an axial discharge when the steam leaves the blade tip at _________ to the direction of the blade motion. (A) 60° (B) 90° (C) 180° (D) 270°

Last Answer : (B) 90°

In an amplifier if conductor during the cycle is from 0 to 90° and again from 180° to 270°, the amplifier will be termed as A) Class A B) Class B C) Class C D) Class AB.

Description : In an amplifier if conductor during the cycle is from 0 to 90° and again from 180° to 270°, the amplifier will be termed as A) Class A B) Class B C) Class C D) Class AB.

Last Answer : B) Class B

If deflection angles are measured in a closed traverse, the difference between the sum of the right-hand and that of the left hand angles should be equal to (A) 0° (B) 90° (C) 180° (D) 360°

Description : If deflection angles are measured in a closed traverse, the difference between the sum of the right-hand and that of the left hand angles should be equal to (A) 0° (B) 90° (C) 180° (D) 360°

Last Answer : (D) 360°

When a periodic disturbing force is applied to a machine, the force is transmitted to the ___________ by the means of spring. (A) dampers (B) foundation (C) mass (D) none of the above

Description : When a periodic disturbing force is applied to a machine, the force is transmitted to the ___________ by the means of spring. (A) dampers (B) foundation (C) mass (D) none of the above

Last Answer : (B) foundation

When a periodic disturbing force is applied to a machine, the force is transmitted to the foundation by the means of spring. a) True b) False

Description : When a periodic disturbing force is applied to a machine, the force is transmitted to the foundation by the means of spring. a) True b) False

Last Answer : a) True

The vector representing acceleration on a vector diagram for a harmonic motion A) Lags the displacement vector by 90° B) Lags the displacement vector by 180° C) Leads the displacement vector by 90° D) Leads the displacement vector by 180°

Description : The vector representing acceleration on a vector diagram for a harmonic motion A) Lags the displacement vector by 90° B) Lags the displacement vector by 180° C) Leads the displacement vector by 90° D) Leads the displacement vector by 180°

Last Answer : C) Leads the displacement vector by 90°

The velocity vector in a vector diagram for a harmonic motion A) Lags the displacement vector by 180° B) Leads the displacement vector by 90° C) Lags the displacement vector by 90° D) Leads the displacement vector by 180°

Description : The velocity vector in a vector diagram for a harmonic motion A) Lags the displacement vector by 180° B) Leads the displacement vector by 90° C) Lags the displacement vector by 90° D) Leads the displacement vector by 180°

Last Answer : B) Leads the displacement vector by 90°

A vibrating machine of 100 kg is mounted on a rubber pad which has stiffness of 500 N/m. Determine force transmitted to the foundation if the unbalanced force 500 N acts on it. The frequency ratio (ω/ω n ) is 1.5 and ξ = 0.5 A. 461.62 N B. 400.23 N C. 450 N D. Insufficient data

Description : A vibrating machine of 100 kg is mounted on a rubber pad which has stiffness of 500 N/m. Determine force transmitted to the foundation if the unbalanced force 500 N acts on it. The frequency ratio (ω/ω n ) is 1.5 and ξ = 0.5 A. 461.62 N B. 400.23 N C. 450 N D. Insufficient data

Last Answer : A. 461.62 N

The degree measure of Prime Meridian is - (1) 90° (2) 180° (3) 0° (4) 360°

Description : The degree measure of Prime Meridian is - (1) 90° (2) 180° (3) 0° (4) 360°

Last Answer : (3) 0° Explanation: A prime meridian is a meridian (a line of longitude) in a geographic coordinate system at which longitude is de fined to be 0°.

What is the International Date Line? (1) It is the equator (2) It is the 0° longitude (3) It is the 90° east longitude (4) It is the 180° longitude

Description : What is the International Date Line? (1) It is the equator (2) It is the 0° longitude (3) It is the 90° east longitude (4) It is the 180° longitude

Last Answer : (4) It is the 180° longitude Explanation: The International Date Line (IDL) is an imaginary line on the surface of the Earth, that runs from the north to the south pole and demarcates ... Ocean, roughly following the 180° longitude but it deviates to pass around some territories and island groups.

What is the International Date Line ? (1) It is the equator (2) It is the 0° longitude (3) It is the 90° east longitude (4) It is the 180° longitude

Description : What is the International Date Line ? (1) It is the equator (2) It is the 0° longitude (3) It is the 90° east longitude (4) It is the 180° longitude

Last Answer : It is the 180° longitude

The ratio of the force transmitted to the force applied is known as the ____________ of the spring support. A. isolation factor B. transmissibility ratio C. both A and B D. none of the above

Description : The ratio of the force transmitted to the force applied is known as the ____________ of the spring support. A. isolation factor B. transmissibility ratio C. both A and B D. none of the above

Last Answer : C. both A and B

The ratio of the force transmitted to the force applied is known as the ____________ of the spring support. (A) isolation factor (B) transmissibility ratio (C) both A and B (D) none of the above

Description : The ratio of the force transmitted to the force applied is known as the ____________ of the spring support. (A) isolation factor (B) transmissibility ratio (C) both A and B (D) none of the above

Last Answer : (C) both A and B

In the graph shown below, the region in which frequency ratio (ω/ω n ) > √2 is known as____ A. Amplification region B. Isolation region C. Spring controlled region D. None of the above

Description : In the graph shown below, the region in which frequency ratio (ω/ω n ) > √2 is known as____ A. Amplification region B. Isolation region C. Spring controlled region D. None of the above

Last Answer : B. Isolation region

The two resonant frequency ratio (ω/ ω2) in a dynamic vibration absorber system for a mass ratio 0.2 are given by A) 0 ; 1.0 B) 0.801 ; 1.248 C) 0.458 ; 1.124 D) 0.642 ; 1.558

Description : The two resonant frequency ratio (ω/ ω2) in a dynamic vibration absorber system for a mass ratio 0.2 are given by A) 0 ; 1.0 B) 0.801 ; 1.248 C) 0.458 ; 1.124 D) 0.642 ; 1.558

Last Answer : B) 0.801 ; 1.248

where springs of low damping are required for the purpose of vibration isolation, it will be most desirable to use A) Metallic springs B) Rubber pad C) Air springs D) Neoprene pads

Description : where springs of low damping are required for the purpose of vibration isolation, it will be most desirable to use A) Metallic springs B) Rubber pad C) Air springs D) Neoprene pads

Last Answer : A) Metallic springs

The natural frequency of a spring-mass system on earth is ωn. The natural frequency of this system on the moon (g of moon = g of earth /6) is * 1 point (A) ωn (B) 0.408ωn (C) 0.204ωn (D) 0.167ωn

Description : The natural frequency of a spring-mass system on earth is ωn. The natural frequency of this system on the moon (g of moon = g of earth /6) is * 1 point (A) ωn (B) 0.408ωn (C) 0.204ωn (D) 0.167ωn

Last Answer : (A) ωn

Damped natural frequency of a system with ωn =100 Hz and ς = 20% is given by A) 92 Hz B) 94 Hz C) 96 Hz D) 98 Hz

Description : Damped natural frequency of a system with ωn =100 Hz and ς = 20% is given by A) 92 Hz B) 94 Hz C) 96 Hz D) 98 Hz

Last Answer : D) 98 Hz

Calculate damped natural frequency, if a spring mass damper system is subjected to periodic disturbing force of 30 N. Damping coefficient is equal to 0.76 times of critical damping coefficient and undamped natural frequency is 5 rad/sec A. 3.99 rad/sec B. 2.13 rad/sec C. 4.12 rad/sec D. 3.24 rad/sec

Description : Calculate damped natural frequency, if a spring mass damper system is subjected to periodic disturbing force of 30 N. Damping coefficient is equal to 0.76 times of critical damping coefficient and undamped natural frequency is 5 rad/sec A. 3.99 rad/sec B. 2.13 rad/sec C. 4.12 rad/sec D. 3.24 rad/sec

Last Answer : D. 3.24 rad/sec

In inverting amplifier, the phase difference between input and output voltages must be A. 30° B. 45° C. 90° D. 180°

Description : In inverting amplifier, the phase difference between input and output voltages must be A. 30° B. 45° C. 90° D. 180°

Last Answer : 180°

For non-inverting amplifier the input and output is A. out of phase B. in phase C. have phase difference of 180° D. have phase difference of 90°

Description : For non-inverting amplifier the input and output is A. out of phase B. in phase C. have phase difference of 180° D. have phase difference of 90°

Last Answer : in phase

Phase difference between a node and an antinode is A. 90° B. 45° C. 180° D. 360°

Description : Phase difference between a node and an antinode is A. 90° B. 45° C. 180° D. 360°

Last Answer : 180°

In the illustrated circuit, what is the phase relationship of the amplifier output compared to the input? EL-0022 A. 0° in-phase B. 180° out of phase C. phase angle of the input divided by power factor D. unable to determine without the value of the bias voltage

Description : In the illustrated circuit, what is the phase relationship of the amplifier output compared to the input? EL-0022 A. 0° in-phase B. 180° out of phase C. phase angle of the input divided by power factor D. unable to determine without the value of the bias voltage

Last Answer : Answer: B

When paralleling two alternators the synchronizing lamps grow dim and are totally darkened as the synchroscope pointer approaches the 0° position. This indicates the ____________. A. alternator voltages are 180° apart B. incoming alternator is running too fast C. incoming alternator is in phase with the bus voltage D. synchroscope pointer is defective or broken

Description : When paralleling two alternators the synchronizing lamps grow dim and are totally darkened as the synchroscope pointer approaches the 0° position. This indicates the ____________. A. alternator voltages ... alternator is in phase with the bus voltage D. synchroscope pointer is defective or broken

Last Answer : Answer: C

The unbalanced force caused by an eccentric mass m rotating at an angular speed v and located at a distance r from the axis of rotation is 2 a. mr ω 2 b. mgω 2 c. mr ω 2

Description : The unbalanced force caused by an eccentric mass m rotating at an angular speed v and located at a distance r from the axis of rotation is 2 a. mr ω 2 b. mgω 2 c. mr ω 2

Last Answer : c. mr ω 2

During vibrations any machine has unbalanced force of 392N and if it transmitted force of magnitude 58.3N then transmissibility value is A 0.481 B 0.822 C 0.148 D 0.296

Description : During vibrations any machine has unbalanced force of 392N and if it transmitted force of magnitude 58.3N then transmissibility value is A 0.481 B 0.822 C 0.148 D 0.296

Last Answer : C 0.148

Centrifugal absorber is used to reduce A) Centrifugal force in rotating system B) Torsional vibration of rotating system C) Vibration in linear system D) Transverse vibrations

Description : Centrifugal absorber is used to reduce A) Centrifugal force in rotating system B) Torsional vibration of rotating system C) Vibration in linear system D) Transverse vibrations

Last Answer : B) Torsional vibration of rotating system

When the frequency of external exciting force is equal to the natural frequency of the vibration of the system A. The amplitude of vibration is zero B. The amplitude of vibration is significantly small C. The amplitude of vibration is very large D. The amplitude does not change

Description : When the frequency of external exciting force is equal to the natural frequency of the vibration of the system A. The amplitude of vibration is zero B. The amplitude of vibration is significantly small C. The amplitude of vibration is very large D. The amplitude does not change

Last Answer : C. The amplitude of vibration is very large

Reduction in vibration amplitude after one complete cycle of single degree free vibration with dry friction damping is_____, if where F"= frictional force between mass and surface and k =stiffness of the system. a)4F/k a b) 2f/K C) 3F/k D)8F/k

Description : Reduction in vibration amplitude after one complete cycle of single degree free vibration with dry friction damping is_____, if where F"= frictional force between mass and surface and k =stiffness of the system. a)4F/k a b) 2f/K C) 3F/k D)8F/k

Last Answer : a)4F/k

In two stroke engine one power occurs in _______ of crank rotation A. 180° B. 360° C. 270° D. 720°

Description : In two stroke engine one power occurs in _______ of crank rotation A. 180° B. 360° C. 270° D. 720°

Last Answer : ANSWER : B

In case of partial bearing, the angle of contact of the bushing with the journal is (A) 270° (B) More than 180° (C) Less than 180° (D) 360°

Description : In case of partial bearing, the angle of contact of the bushing with the journal is (A) 270° (B) More than 180° (C) Less than 180° (D) 360°

Last Answer : (C) Less than 180°

The sum of the three interior angles of a triangle, the vertices of which lie on the surface of the earth, covering a vast area of several hundreds of sq kms, is : (a) Less than 180° (b) Equal to 180° (c) More than 180° but not less than 270° (d) More than 180° but not more than 225°

Description : The sum of the three interior angles of a triangle, the vertices of which lie on the surface of the earth, covering a vast area of several hundreds of sq kms, is : (a) Less than 180° (b) Equal to 180° (c) More than 180° but not less than 270° (d) More than 180° but not more than 225°

Last Answer : (d) More than 180° but not more than 225°