If deflection angles are measured in a closed traverse, the difference between the sum of the right-hand and that of the left hand angles should be equal to (A) 0° (B) 90° (C) 180° (D) 360°

If deflection angles are measured in a closed traverse, the difference between the sum of the
right-hand and that of the left hand angles should be equal to
(A) 0°
(B) 90°
(C) 180°
(D) 360°
by

1 Answer

Answer :

(D) 360°
by

Related questions

A traverse deflection angle is (A) Less than 90° (B) More than 90° but less than 180° (C) The difference between the included angle and 180° (D) The difference between 360° and the included angle

Description : A traverse deflection angle is  (A) Less than 90°  (B) More than 90° but less than 180°  (C) The difference between the included angle and 180°  (D) The difference between 360° and the included angle 

Last Answer : (C) The difference between the included angle and 180° 

The degree measure of Prime Meridian is - (1) 90° (2) 180° (3) 0° (4) 360°

Description : The degree measure of Prime Meridian is - (1) 90° (2) 180° (3) 0° (4) 360°

Last Answer : (3) 0° Explanation: A prime meridian is a meridian (a line of longitude) in a geographic coordinate system at which longitude is de fined to be 0°.

What is the phase relationship of the signal at the collector of Q2 to the signal at the collector of Q, A) 0° B) 90° C) 180° D) 360°.

Description : What is the phase relationship of the signal at the collector of Q2 to the signal at the collector of Q, A) 0° B) 90° C) 180° D) 360°.

Last Answer : C) 180°

Back bearing of a line is equal to (A) Fore bearing ± 90° (B) Fore bearing ± 180° (C) Fore bearing ± 360° (D) Fore bearing ± 270°

Description : Back bearing of a line is equal to (A) Fore bearing ± 90° (B) Fore bearing ± 180° (C) Fore bearing ± 360° (D) Fore bearing ± 270°

Last Answer : (B) Fore bearing ± 180°

Phase difference between a node and an antinode is A. 90° B. 45° C. 180° D. 360°

Description : Phase difference between a node and an antinode is A. 90° B. 45° C. 180° D. 360°

Last Answer : 180°

If isolation factor is negative, then what is the phase difference between transmitted and disturbing force? a) 180° b) 90° c) 450° d) 360°

Description : If isolation factor is negative, then what is the phase difference between transmitted and disturbing force? a) 180° b) 90° c) 450° d) 360°

Last Answer : a) 180°

In case of full journal bearing, the angle of contact of the bushing with the journal is (A) 60° (B) 90° (C) 180° (D) 360°

Description : In case of full journal bearing, the angle of contact of the bushing with the journal is (A) 60° (B) 90° (C) 180° (D) 360°

Last Answer : (D) 360°

Number of degree a complete circle represents is A. 90° B. 180° C. 270° D. 360°

Description : Number of degree a complete circle represents is A. 90° B. 180° C. 270° D. 360°

Last Answer : 360°

In vibration isolation system, if ω/ωn, then the phase difference between the transmitted force and the disturbing force is A 0° B 90° C 180° D 270°

Description : In vibration isolation system, if ω/ωn, then the phase difference between the transmitted force and the disturbing force is A 0° B 90° C 180° D 270°

Last Answer : C 180°

In vibration isolation system, if ω/ω n > 1, then the phase difference between the transmitted force and the disturbing force is A. 0° B. 90° C. 180° D. 270°

Description : In vibration isolation system, if ω/ω n > 1, then the phase difference between the transmitted force and the disturbing force is A. 0° B. 90° C. 180° D. 270°

Last Answer : C. 180°

In vibration isolation system, if ω/ω n , then the phase difference between the transmitted force and the disturbing force is a) 0° b) 90° c) 180° d) 270°

Description : In vibration isolation system, if ω/ω n , then the phase difference between the transmitted force and the disturbing force is a) 0° b) 90° c) 180° d) 270°

Last Answer : c) 180°

In vibration isolation system, if ω/ω n , then the phase difference between the transmitted force and the disturbing force is a) 0° b) 90° c) 180° d) 270

Description : In vibration isolation system, if ω/ω n , then the phase difference between the transmitted force and the disturbing force is a) 0° b) 90° c) 180° d) 270

Last Answer : c) 180°

In vibration isolation system, if ω/ω n > 1, then the phase difference between the transmitted force and the disturbing force is a) 0° b) 90° c) 180° d) 270°

Description : In vibration isolation system, if ω/ω n > 1, then the phase difference between the transmitted force and the disturbing force is a) 0° b) 90° c) 180° d) 270°

Last Answer : c) 180°

An angle of deflection right, may be directly obtained by setting the instrument to read (A) Zero on back station (B) 180° on back station (C) 90° (D) 270° on back station

Description : An angle of deflection right, may be directly obtained by setting the instrument to read (A) Zero on back station (B) 180° on back station (C) 90° (D) 270° on back station

Last Answer : (A) Zero on back station

What is the International Date Line? (1) It is the equator (2) It is the 0° longitude (3) It is the 90° east longitude (4) It is the 180° longitude

Description : What is the International Date Line? (1) It is the equator (2) It is the 0° longitude (3) It is the 90° east longitude (4) It is the 180° longitude

Last Answer : (4) It is the 180° longitude Explanation: The International Date Line (IDL) is an imaginary line on the surface of the Earth, that runs from the north to the south pole and demarcates ... Ocean, roughly following the 180° longitude but it deviates to pass around some territories and island groups.

What is the International Date Line ? (1) It is the equator (2) It is the 0° longitude (3) It is the 90° east longitude (4) It is the 180° longitude

Description : What is the International Date Line ? (1) It is the equator (2) It is the 0° longitude (3) It is the 90° east longitude (4) It is the 180° longitude

Last Answer : It is the 180° longitude

The sum of the three interior angles of a triangle, the vertices of which lie on the surface of the earth, covering a vast area of several hundreds of sq kms, is : (a) Less than 180° (b) Equal to 180° (c) More than 180° but not less than 270° (d) More than 180° but not more than 225°

Description : The sum of the three interior angles of a triangle, the vertices of which lie on the surface of the earth, covering a vast area of several hundreds of sq kms, is : (a) Less than 180° (b) Equal to 180° (c) More than 180° but not less than 270° (d) More than 180° but not more than 225°

Last Answer : (d) More than 180° but not more than 225°

You are paralleling two alternators. The synchronizing lamps grow dim and are totally darkened as the synchroscope pointer approaches the 0° position. This indicates that the ____________. A. alternator voltages are 180° apart B. circuit breaker can be closed C. incoming alternator is running too slowly D. synchroscope is defective or broken

Description : You are paralleling two alternators. The synchronizing lamps grow dim and are totally darkened as the synchroscope pointer approaches the 0° position. This indicates that the ____________. A. alternator ... be closed C. incoming alternator is running too slowly D. synchroscope is defective or broken

Last Answer : Answer: B

The operation of making the algebraic sum of latitudes and departures of a closed traverse, each equal to zero, is known (A) Balancing the sights (B) Balancing the departures (C) Balancing the latitudes (D) Balancing the traverse

Description : The operation of making the algebraic sum of latitudes and departures of a closed traverse, each equal to zero, is known (A) Balancing the sights (B) Balancing the departures (C) Balancing the latitudes (D) Balancing the traverse

Last Answer : (D) Balancing the traverse

In a precision traverse, included angles are measured by setting the vernier (A) To read zero exactly on back station (B) To read 5° exactly on back station (C) Somewhere near zero and reading both verniers on back station (D) All the above

Description : In a precision traverse, included angles are measured by setting the vernier  (A) To read zero exactly on back station  (B) To read 5° exactly on back station  (C) Somewhere near zero and reading both verniers on back station  (D) All the above

Last Answer : (C) Somewhere near zero and reading both verniers on back station 

The included angles of a theodolite traverse, are generally measured (A) Clockwise from the forward station (B) Anti-clockwise from the back station (C) Anti-clockwise from the forward station (D) Clockwise from the back station

Description : The included angles of a theodolite traverse, are generally measured (A) Clockwise from the forward station (B) Anti-clockwise from the back station (C) Anti-clockwise from the forward station (D) Clockwise from the back station

Last Answer : (D) Clockwise from the back station

In a closed traverse, sum of south latitudes exceeds the sum of north latitudes and the sum of east departures exceeds the sum of west departures, then, the closing line will lie in (A) North-west quadrant (B) North-east quadrant (C) South-east quadrant (D) South-west quadrant

Description : In a closed traverse, sum of south latitudes exceeds the sum of north latitudes and the sum of east departures exceeds the sum of west departures, then, the closing line will lie in (A) North-west quadrant (B) North-east quadrant (C) South-east quadrant (D) South-west quadrant

Last Answer : (A) North-west quadrant

If in a closed traverse, the sum of the north latitudes is more than the sum of the south latitudes and also the sum of west departures than the sum of the east departures, the bearing of the closing line is in the (A) NE quadrant (B) SE quadrant (C) NW quadrant(D) SW quadrant

Description : If in a closed traverse, the sum of the north latitudes is more than the sum of the south latitudes and also the sum of west departures than the sum of the east departures, the bearing of the closing line is in the (A) NE quadrant (B) SE quadrant (C) NW quadrant (D) SW quadrant

Last Answer : (B) SE quadrant

If the whole circle bearing of a line is 180°, its reduced bearing is (A) S 0° E (B) S 0° W (C) S (D) N

Description : If the whole circle bearing of a line is 180°, its reduced bearing is (A) S 0° E (B) S 0° W (C) S (D) N

Last Answer : (C) S

what-Norman was asked 2 prove that all right angles r congruent. He was provided a diagram with several right angles. Norman measured each angle with a protractor & found that they each measured 90°.?

Description : what-Norman was asked 2 prove that all right angles r congruent. He was provided a diagram with several right angles. Norman measured each angle with a protractor & found that they each measured 90°.?

Last Answer : He wrote“These angles all measure 90° so by the definition of congruent angles theyr congruent.Look at the statement Norman was asked to prove and decide which word his proof did not address:All right angles are congruent.

Plywood is made by bonding together thin layers of wood in such a way that the angle between grains of any layer to grains of adjacent layers is (A) 0° (B) 30° (C) 45° (D) 90°

Description : Plywood is made by bonding together thin layers of wood in such a way that the angle between grains of any layer to grains of adjacent layers is (A) 0° (B) 30° (C) 45° (D) 90°

Last Answer : Answer: Option D

In any good staircase, the maximum and minimum pitch respectively should be (A) 90° and 0° (B) 75° and 30° (C) 60° and 10° (D) 40° and 25°

Description : In any good staircase, the maximum and minimum pitch respectively should be (A) 90° and 0° (B) 75° and 30° (C) 60° and 10° (D) 40° and 25°

Last Answer : Option D

In two stroke engine one power occurs in _______ of crank rotation A. 180° B. 360° C. 270° D. 720°

Description : In two stroke engine one power occurs in _______ of crank rotation A. 180° B. 360° C. 270° D. 720°

Last Answer : ANSWER : B

In four stroke engine there is one power stroke in _____ of crankshaft rotation. a. 180° b. 360° c. 540° d. 720° (Ans:d)

Description : In four stroke engine there is one power stroke in _____ of crankshaft rotation. a. 180° b. 360° c. 540° d. 720° (Ans:d)

Last Answer : The ascending order of strokes in four stroke engine is a. Suction stroke - Expansion stroke - Compression stroke - Exhaust stroke b. Suction stroke - Compression stroke - Expansion stroke -Exhaust ... stroke d. Suction stroke - Compression stroke - Exhaust stroke - Expansion stroke (Ans:b)

What will be the phase angle relationship of a six-pole, three-phase, rotating field generator? A. 60° B. 120° C. 180° D. 360°

Description : What will be the phase angle relationship of a six-pole, three-phase, rotating field generator? A. 60° B. 120° C. 180° D. 360°

Last Answer : Answer: B

In case of partial bearing, the angle of contact of the bushing with the journal is (A) 270° (B) More than 180° (C) Less than 180° (D) 360°

Description : In case of partial bearing, the angle of contact of the bushing with the journal is (A) 270° (B) More than 180° (C) Less than 180° (D) 360°

Last Answer : (C) Less than 180°

In case of partial bearing, the angle of contact of the bushing with the journal is usually (A) 120° (B) 180° (C) 45° (D) 360°

Description : In case of partial bearing, the angle of contact of the bushing with the journal is usually (A) 120° (B) 180° (C) 45° (D) 360°

Last Answer : (A) 120°

If the long chord and tangent length of a circular curve of radius R are equal the angle of deflection, is (A) 30° (B) 60° (C) 90° (D) 120°

Description : If the long chord and tangent length of a circular curve of radius R are equal the angle of deflection, is (A) 30° (B) 60° (C) 90° (D) 120°

Last Answer : D

In inverting amplifier, the phase difference between input and output voltages must be A. 30° B. 45° C. 90° D. 180°

Description : In inverting amplifier, the phase difference between input and output voltages must be A. 30° B. 45° C. 90° D. 180°

Last Answer : 180°

For non-inverting amplifier the input and output is A. out of phase B. in phase C. have phase difference of 180° D. have phase difference of 90°

Description : For non-inverting amplifier the input and output is A. out of phase B. in phase C. have phase difference of 180° D. have phase difference of 90°

Last Answer : in phase

The horizontal angles from the boat between A and B and B and C, the stations on the shore are 1 2. The distances AB = L1 and BC = L2 2 at C between the boat and station B between A and C at B). (A) 1 2) = (L2 1/L1 2) = K (B) t 2 = 360° - 1 2 (C) 2 = sin /(K + ) (D) All the above

Description : The horizontal angles from the boat between A and B and B and C, the stations on the shore are 1 2. The distances AB = L1 and BC = L2 2 at C between the boat and station B between A and C at B). (A) 1 2) = (L2 1/L1 2) = K (B) t 2 = 360° - 1 2 (C) 2 = sin /(K + ) (D) All the above

Last Answer : (D) All the above

In the illustrated circuit, what is the phase relationship of the amplifier output compared to the input? EL-0022 A. 0° in-phase B. 180° out of phase C. phase angle of the input divided by power factor D. unable to determine without the value of the bias voltage

Description : In the illustrated circuit, what is the phase relationship of the amplifier output compared to the input? EL-0022 A. 0° in-phase B. 180° out of phase C. phase angle of the input divided by power factor D. unable to determine without the value of the bias voltage

Last Answer : Answer: B

When paralleling two alternators the synchronizing lamps grow dim and are totally darkened as the synchroscope pointer approaches the 0° position. This indicates the ____________. A. alternator voltages are 180° apart B. incoming alternator is running too fast C. incoming alternator is in phase with the bus voltage D. synchroscope pointer is defective or broken

Description : When paralleling two alternators the synchronizing lamps grow dim and are totally darkened as the synchroscope pointer approaches the 0° position. This indicates the ____________. A. alternator voltages ... alternator is in phase with the bus voltage D. synchroscope pointer is defective or broken

Last Answer : Answer: C

Why do sine and cosine have values at 90° and 0°?

Description : Why do sine and cosine have values at 90° and 0°?

Last Answer : There is no premise that a trigonometric function can only be applied in a right triangle. How would it be possible to talk about trigonometric functions of angles greater than 180? Sine and cosine are simply ... projection, its cosine is zero. Similarly, for the sine of a 90 degree angle being 1.

The bearings of two traverse legs AB and BC are N52° 45' E and N34° 30' E respectively. The deflection angle is (A) 18° 15' E (B) 18° 15' N (C) 18° 15' W (D) 18° 15' L

Description : The bearings of two traverse legs AB and BC are N52° 45' E and N34° 30' E respectively. The deflection angle is (A) 18° 15' E (B) 18° 15' N (C) 18° 15' W (D) 18° 15' L

Last Answer : (D) 18° 15' L

The angle between the prolongation of the preceding line and the forward line of a traverse is called (A) Deflection angle (B) Included angle (C) Direct angle (D) None of the above

Description : The angle between the prolongation of the preceding line and the forward line of a traverse is called (A) Deflection angle (B) Included angle (C) Direct angle (D) None of the above

Last Answer : (A) Deflection angle

The vector representing acceleration on a vector diagram for a harmonic motion A) Lags the displacement vector by 90° B) Lags the displacement vector by 180° C) Leads the displacement vector by 90° D) Leads the displacement vector by 180°

Description : The vector representing acceleration on a vector diagram for a harmonic motion A) Lags the displacement vector by 90° B) Lags the displacement vector by 180° C) Leads the displacement vector by 90° D) Leads the displacement vector by 180°

Last Answer : C) Leads the displacement vector by 90°

The velocity vector in a vector diagram for a harmonic motion A) Lags the displacement vector by 180° B) Leads the displacement vector by 90° C) Lags the displacement vector by 90° D) Leads the displacement vector by 180°

Description : The velocity vector in a vector diagram for a harmonic motion A) Lags the displacement vector by 180° B) Leads the displacement vector by 90° C) Lags the displacement vector by 90° D) Leads the displacement vector by 180°

Last Answer : B) Leads the displacement vector by 90°

Which of the following is closest to the C–O–C bond angle in CH3–O–CH3? (a) 180° (b) 120° (c) 109.5° (d) 90°

Description : Which of the following is closest to the C–O–C bond angle in CH3–O–CH3? (a) 180° (b) 120° (c) 109.5° (d) 90°

Last Answer : 109.5°

The H–C–H bond angle in ethylene is (a) 60° (b) 120° (c) 90° (d) 180°

Description : The H–C–H bond angle in ethylene is (a) 60° (b) 120° (c) 90° (d) 180°

Last Answer : 120°

A turbine is said to have an axial discharge when the steam leaves the blade tip at _________ to the direction of the blade motion. (A) 60° (B) 90° (C) 180° (D) 270°

Description : A turbine is said to have an axial discharge when the steam leaves the blade tip at _________ to the direction of the blade motion. (A) 60° (B) 90° (C) 180° (D) 270°

Last Answer : (B) 90°

In an amplifier if conductor during the cycle is from 0 to 90° and again from 180° to 270°, the amplifier will be termed as A) Class A B) Class B C) Class C D) Class AB.

Description : In an amplifier if conductor during the cycle is from 0 to 90° and again from 180° to 270°, the amplifier will be termed as A) Class A B) Class B C) Class C D) Class AB.

Last Answer : B) Class B

In cables the charging current (a) lags the voltage by 90° (b) leads the voltage by 90° (c) lags the voltage by 180° (d) leads the voltage by 180°

Description : In cables the charging current (a) lags the voltage by 90° (b) leads the voltage by 90° (c) lags the voltage by 180° (d) leads the voltage by 180°

Last Answer : (b) leads the voltage by 90°

In optical reading instruments (A) The vertical circle is usually continuous from 0° to 359° (B) The readings increase when the telescope is elevated in the face left position (C) The readings decrease when the telescope is elevated in the face right position (D) All the above

Description : In optical reading instruments (A) The vertical circle is usually continuous from 0° to 359° (B) The readings increase when the telescope is elevated in the face left position (C) The readings decrease when the telescope is elevated in the face right position (D) All the above

Last Answer : (D) All the above

In precision theodolite traverse if included angles are read twice and the mean reading accepted using both verniers having a least count of 30". Assuming the instrument to be in perfect adjustment, linear measurements correct to 6 mm per 30 metre tape duly corrected for temperature, slope and sag, the angular error of closure not to exceed (where n is the number of traverse legs) (A) 50" n(B) 30" n(C) 60" n (D) None of these

Description : In precision theodolite traverse if included angles are read twice and the mean reading accepted using both verniers having a least count of 30". Assuming the instrument to be in perfect adjustment, linear measurements correct to 6 mm per ... legs) (A) 50" n (B) 30" n (C) 60" n (D) None of these

Last Answer : (A) 50" n