The condition to be fulfilled in the design of spring for vibration isolation of a system where excitation is due to a rotating unbalance is A) ω << ωn B) ω = ωn C) ω > ωn D) ω >> ωn

The condition to be fulfilled in the design of spring for vibration isolation of a system where
excitation is due to a rotating unbalance is
A) ω << ωn
B) ω = ωn
C) ω > ωn
D) ω >> ωn
by

1 Answer

Answer :

A) ω << ωn
by

Related questions

The response of a damped forced vibration system A) Leads the system excitation ( for all values of ω/ ωn) B) Lags the system excitation ( for all values of ω/ ωn) C) Leads the system excitation ( for all values of ω/ ωn << 1)

Description : The response of a damped forced vibration system A) Leads the system excitation ( for all values of ω/ ωn) B) Lags the system excitation ( for all values of ω/ ωn) C) Leads the system excitation ( for all values of ω/ ωn

Last Answer : B) Lags the system excitation ( for all values of ω/ ωn)

In vibration isolation system, if ω/ωn, then the phase difference between the transmitted force and the disturbing force is A 0° B 90° C 180° D 270°

Description : In vibration isolation system, if ω/ωn, then the phase difference between the transmitted force and the disturbing force is A 0° B 90° C 180° D 270°

Last Answer : C 180°

In vibration isolation system, if ω/ωn < 2, then for all values of damping factor, the transmissibility will be A less than unity B equal to unity C greater than unity D zero

Description : In vibration isolation system, if ω/ωn < 2, then for all values of damping factor, the transmissibility will be A less than unity B equal to unity C greater than unity D zero

Last Answer : C greater than unity

In vibration isolation system, the transmissibility will be equal to unity, for all values of damping factor, if ω/ωn is A. Equal to 1 B. Equal to √2 C. Less than √2 D. Greater than √2

Description : In vibration isolation system, the transmissibility will be equal to unity, for all values of damping factor, if ω/ωn is A. Equal to 1 B. Equal to √2 C. Less than √2 D. Greater than √2

Last Answer : B. Equal to √2

In vibration isolation system, if ω/ω n > 1, then the phase difference between the transmitted force and the disturbing force is A. 0° B. 90° C. 180° D. 270°

Description : In vibration isolation system, if ω/ω n > 1, then the phase difference between the transmitted force and the disturbing force is A. 0° B. 90° C. 180° D. 270°

Last Answer : C. 180°

In vibration isolation system, if ω/ω n < 2, then for all values of damping factor, the transmissibility will be a) less than unity b) equal to unity c) greater than unity d) zero

Description : In vibration isolation system, if ω/ω n < 2, then for all values of damping factor, the transmissibility will be a) less than unity b) equal to unity c) greater than unity d) zero

Last Answer : c) greater than unity

In vibration isolation system, if ω/ω n , then the phase difference between the transmitted force and the disturbing force is a) 0° b) 90° c) 180° d) 270°

Description : In vibration isolation system, if ω/ω n , then the phase difference between the transmitted force and the disturbing force is a) 0° b) 90° c) 180° d) 270°

Last Answer : c) 180°

In vibration isolation system, if ω/ω n < 2, then for all values of damping factor, the transmissibility will be a) less than unity b) equal to unity c) greater than unity d) zero

Description : In vibration isolation system, if ω/ω n < 2, then for all values of damping factor, the transmissibility will be a) less than unity b) equal to unity c) greater than unity d) zero

Last Answer : c) greater than unity

In vibration isolation system, if ω/ω n , then the phase difference between the transmitted force and the disturbing force is a) 0° b) 90° c) 180° d) 270

Description : In vibration isolation system, if ω/ω n , then the phase difference between the transmitted force and the disturbing force is a) 0° b) 90° c) 180° d) 270

Last Answer : c) 180°

In vibration isolation system, if ω/ω n > 1, then the phase difference between the transmitted force and the disturbing force is a) 0° b) 90° c) 180° d) 270°

Description : In vibration isolation system, if ω/ω n > 1, then the phase difference between the transmitted force and the disturbing force is a) 0° b) 90° c) 180° d) 270°

Last Answer : c) 180°

n vibration isolation system, if ω/ω n is less than √2 , then for all values of the damping factor, the transmissibility will be a) less than unity b) equal to unity c) greater than unity d) zero

Description : n vibration isolation system, if ω/ω n is less than √2 , then for all values of the damping factor, the transmissibility will be a) less than unity b) equal to unity c) greater than unity d) zero

Last Answer : c) greater than unity

Which of the following condition should be satisfied in the design of a vibration absorber ? A) Natural frequency of the auxiliary system should be equal to the natural frequency of the main system B) Natural frequency of the auxiliary system should be equal to the half natural frequency of the main systemC) Natural frequency of the auxiliary system should be fall in between natural frequency of the main system and the frequency of excitation D) Natural frequency of the auxiliary system should be twice natural frequency of the main system

Description : Which of the following condition should be satisfied in the design of a vibration absorber ? A) Natural frequency of the auxiliary system should be equal to the natural frequency of the main ... D) Natural frequency of the auxiliary system should be twice natural frequency of the main system

Last Answer : A) Natural frequency of the auxiliary system should be equal to the natural frequency of the main system

In the graph shown below, the region in which frequency ratio (ω/ω n ) > √2 is known as____ A. Amplification region B. Isolation region C. Spring controlled region D. None of the above

Description : In the graph shown below, the region in which frequency ratio (ω/ω n ) > √2 is known as____ A. Amplification region B. Isolation region C. Spring controlled region D. None of the above

Last Answer : B. Isolation region

If ωmax is the frequency at which the peak amplitude occurs and ωn is the natural frequency of the system then In a forced vibration system with damping, the higher the damping, A) More will be the difference between ωn and ωmax B) Less will be the difference between ωn and ωmax C) The difference of ωn and ωmax is independent of damping in this system D) The difference between ωn and ωmax will be zero

Description : If ωmax is the frequency at which the peak amplitude occurs and ωn is the natural frequency of the system then In a forced vibration system with damping, the higher the damping, A) More will be ... and ωmax is independent of damping in this system D) The difference between ωn and ωmax will be zero

Last Answer : A) More will be the difference between ωn and ωmax

The natural frequency of torsional vibration is given by A) ωn = (-kt)/I B) ωn = kt/I C) ωn = √(kt/I) D) ωn = √(2&kt/I)

Description : The natural frequency of torsional vibration is given by A) ωn = (-kt)/I B) ωn = kt/I C) ωn = √(kt/I) D) ωn = √(2&kt/I)

Last Answer : C) ωn = √(kt/I)

The natural frequency of a spring-mass system on earth is ωn. The natural frequency of this system on the moon (g of moon = g of earth /6) is * 1 point (A) ωn (B) 0.408ωn (C) 0.204ωn (D) 0.167ωn

Description : The natural frequency of a spring-mass system on earth is ωn. The natural frequency of this system on the moon (g of moon = g of earth /6) is * 1 point (A) ωn (B) 0.408ωn (C) 0.204ωn (D) 0.167ωn

Last Answer : (A) ωn

The two resonant frequency ratio (ω/ ω2) in a dynamic vibration absorber system for a mass ratio 0.2 are given by A) 0 ; 1.0 B) 0.801 ; 1.248 C) 0.458 ; 1.124 D) 0.642 ; 1.558

Description : The two resonant frequency ratio (ω/ ω2) in a dynamic vibration absorber system for a mass ratio 0.2 are given by A) 0 ; 1.0 B) 0.801 ; 1.248 C) 0.458 ; 1.124 D) 0.642 ; 1.558

Last Answer : B) 0.801 ; 1.248

If frequency of excitation of a forced vibration system with negligible damping is very close to natural frequency of the system, then the system will A) Execute harmonic motion of large amplitude B) Beat with a very high peak amplitude C) Perform aperiodic motion D) None of the above

Description : If frequency of excitation of a forced vibration system with negligible damping is very close to natural frequency of the system, then the system will A) Execute harmonic motion of large amplitude B) Beat with a very high peak amplitude C) Perform aperiodic motion D) None of the above

Last Answer : A) Execute harmonic motion of large amplitude

A forced vibration system vibrates at A) Natural frequency of the system B) Frequency of external excitation C) Frequency of internal excitation D) None of the above

Description : A forced vibration system vibrates at A) Natural frequency of the system B) Frequency of external excitation C) Frequency of internal excitation D) None of the above

Last Answer : B) Frequency of external excitation

The unbalanced force caused by an eccentric mass m rotating at an angular speed v and located at a distance r from the axis of rotation is 2 a. mr ω 2 b. mgω 2 c. mr ω 2

Description : The unbalanced force caused by an eccentric mass m rotating at an angular speed v and located at a distance r from the axis of rotation is 2 a. mr ω 2 b. mgω 2 c. mr ω 2

Last Answer : c. mr ω 2

where springs of low damping are required for the purpose of vibration isolation, it will be most desirable to use A) Metallic springs B) Rubber pad C) Air springs D) Neoprene pads

Description : where springs of low damping are required for the purpose of vibration isolation, it will be most desirable to use A) Metallic springs B) Rubber pad C) Air springs D) Neoprene pads

Last Answer : A) Metallic springs

Often an unbalance of forces is produced in rotary or reciprocating machinery due to the ______ * 1 point (A) Centripetal forces (B) Centrifugal forces (C) Friction forces (D) Inertia forces

Description : Often an unbalance of forces is produced in rotary or reciprocating machinery due to the ______ * 1 point (A) Centripetal forces (B) Centrifugal forces (C) Friction forces (D) Inertia forces

Last Answer : (D) Inertia forces

Centrifugal absorber is used to reduce A) Centrifugal force in rotating system B) Torsional vibration of rotating system C) Vibration in linear system D) Transverse vibrations

Description : Centrifugal absorber is used to reduce A) Centrifugal force in rotating system B) Torsional vibration of rotating system C) Vibration in linear system D) Transverse vibrations

Last Answer : B) Torsional vibration of rotating system

The rotating shaft or rotor vibrates with excessive lateral vibration at angular speed at which occurs is called as A) rotating speed B) critical speed C) vibrating speed D) None of the above

Description : The rotating shaft or rotor vibrates with excessive lateral vibration at angular speed at which occurs is called as A) rotating speed B) critical speed C) vibrating speed D) None of the above

Last Answer : B) critical speed

When heavy rotating masses are connected by a shaft and equal and opposite torques are applied to these masses (rotors) A. The rotors vibrate torsionally in the same direction. B. The rotors vibrate torsionally in the opposite direction. C. There is one point on the axis of shaft which remains undisturbed by vibration. D. Both (B) and (C)

Description : When heavy rotating masses are connected by a shaft and equal and opposite torques are applied to these masses (rotors) A. The rotors vibrate torsionally in the same direction. B. The rotors vibrate torsionally ... on the axis of shaft which remains undisturbed by vibration. D. Both (B) and (C)

Last Answer : D. Both (B) and (C)

The natural frequency of a spring-mass system on earth is ω n . The natural frequency of this system on the moon (g moon = g earth /6) is a) ω n b) 0.408ω n c) 0.204ω n d) 0.167ω n

Description : The natural frequency of a spring-mass system on earth is ω n . The natural frequency of this system on the moon (g moon = g earth /6) is a) ω n b) 0.408ω n c) 0.204ω n d) 0.167ω n

Last Answer : a) ω n

The natural frequency of a spring-mass system on earth is ω n . The natural frequency of this system on the moon (g moon = g earth /6) is a) ω n b) 0.408ω n c) 0.204ω n d) 0.167ω n

Description : The natural frequency of a spring-mass system on earth is ω n . The natural frequency of this system on the moon (g moon = g earth /6) is a) ω n b) 0.408ω n c) 0.204ω n d) 0.167ω n

Last Answer : a) ω n

A vibrating system having mass 1kg, a spring of stiffness 1000N/m and damping factor of 0.632 and it is put to harmonic excitation of 10N. Find the amplitude at resonance. A 0.079 B 7.9C 0.056 D 0.00791

Description : A vibrating system having mass 1kg, a spring of stiffness 1000N/m and damping factor of 0.632 and it is put to harmonic excitation of 10N. Find the amplitude at resonance. A 0.079 B 7.9C 0.056 D 0.00791

Last Answer : D 0.00791

A single degree of freedom spring-mass system is subjected to a harmonic force of constant amplitude. For an excitation frequency of √3k/m , the ratio of the amplitude of steady state response to the static deflection of the spring is __________ A. 0.2 B. 0.5 C. 0.8 D. None of the above

Description : A single degree of freedom spring-mass system is subjected to a harmonic force of constant amplitude. For an excitation frequency of √3k/m , the ratio of the amplitude of steady state response to the static deflection of the spring is __________ A. 0.2 B. 0.5 C. 0.8 D. None of the above

Last Answer : B. 0.5

A 10 Kg mass suspended by spring of stiffness 1000 N/m. the natural frequency of the system after giving excitation will be A. 0 Hz B. 1.59 Hz C. 2 Hz D. 15.9 Hz

Description : A 10 Kg mass suspended by spring of stiffness 1000 N/m. the natural frequency of the system after giving excitation will be A. 0 Hz B. 1.59 Hz C. 2 Hz D. 15.9 Hz

Last Answer : B. 1.59 Hz

Damped natural frequency of a system with ωn =100 Hz and ς = 20% is given by A) 92 Hz B) 94 Hz C) 96 Hz D) 98 Hz

Description : Damped natural frequency of a system with ωn =100 Hz and ς = 20% is given by A) 92 Hz B) 94 Hz C) 96 Hz D) 98 Hz

Last Answer : D) 98 Hz

The ratio of the force transmitted to the force applied is known as the ____________ of the spring support. A. isolation factor B. transmissibility ratio C. both A and B D. none of the above

Description : The ratio of the force transmitted to the force applied is known as the ____________ of the spring support. A. isolation factor B. transmissibility ratio C. both A and B D. none of the above

Last Answer : C. both A and B

The ratio of the force transmitted to the force applied is known as the ____________ of the spring support. (A) isolation factor (B) transmissibility ratio (C) both A and B (D) none of the above

Description : The ratio of the force transmitted to the force applied is known as the ____________ of the spring support. (A) isolation factor (B) transmissibility ratio (C) both A and B (D) none of the above

Last Answer : (C) both A and B

In a spring mass system of mass m and stiffness k, the end of the spring are securely fixed and mass is attached to intermediate point of spring. The natural frequency of longitudinal vibration of the system A) Is maximum when mass is attached to mid point of the spring B) Is minimum when mass is attached to mid point of the spring C) Decreases as the distance from the top end where mass is attached decreases D) Decreases as the distance from the bottom end where mass is attached decreases

Description : In a spring mass system of mass m and stiffness k, the end of the spring are securely fixed and mass is attached to intermediate point of spring. The natural frequency of longitudinal ... is attached decreases D) Decreases as the distance from the bottom end where mass is attached decreases

Last Answer : B) Is minimum when mass is attached to mid point of the spring

In the spring mass system if the mass of the system is doubled with spring stiffness halved, the natural frequency of longitudinal vibration A) Remained unchanged B) Is doubled C) Is halved D) Is quadruped

Description : In the spring mass system if the mass of the system is doubled with spring stiffness halved, the natural frequency of longitudinal vibration A) Remained unchanged B) Is doubled C) Is halved D) Is quadruped

Last Answer : C) Is halved

The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that A Its natural frequency is very low in comparison to the frequency of vibration B Its natural frequency is very high in comparison to the frequency of vibration C Its natural frequency is equal to the frequency of vibration D Measurement of vibratory motion is without any reference point

Description : The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that A Its natural frequency is very low in comparison to the frequency ... is equal to the frequency of vibration D Measurement of vibratory motion is without any reference point

Last Answer : C Its natural frequency is equal to the frequency of vibration

The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that a) its natural frequency is very low in comparison to the frequency of vibration b) its natural frequency is very high in comparison to the frequency of vibration c) its natural frequency is equal to the frequency of vibration d) measurement of vibratory motion is without any reference point

Description : The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that a) its natural frequency is very low in comparison to the frequency ... is equal to the frequency of vibration d) measurement of vibratory motion is without any reference point

Last Answer : c) its natural frequency is equal to the frequency of vibration

The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that ______. (A) its natural frequency is very low in comparison to the frequency of vibration (B) its natural frequency is very high in comparison to the frequency of vibration (C) its natural frequency is equal to the frequency of vibration (D) measurement of vibratory motion is without any reference poin

Description : The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that ______. (A) its natural frequency is very low in comparison to the ... is equal to the frequency of vibration (D) measurement of vibratory motion is without any reference poin

Last Answer : (C) its natural frequency is equal to the frequency of vibration

The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that a) its natural frequency is very low in comparison to the frequency of vibration b) its natural frequency is very high in comparison to the frequency of vibration c) its natural frequency is equal to the frequency of vibration d) measurement of vibratory motion is without any reference poin

Description : The accelerometer is used as a transducer to measure earthquake in Richter scale. Its design is based on the principle that a) its natural frequency is very low in comparison to the frequency ... is equal to the frequency of vibration d) measurement of vibratory motion is without any reference poin

Last Answer : c) its natural frequency is equal to the frequency of vibration

Natural frequency of the system is due to A Resonance B Forced Vibration C Damping D Free Vibration

Description : Natural frequency of the system is due to A Resonance B Forced Vibration C Damping D Free Vibration

Last Answer : D Free Vibration

Natural frequency of the system is due to A) Free vibration B) Forced vibration C) Resonance D) Damping

Description : Natural frequency of the system is due to A) Free vibration B) Forced vibration C) Resonance D) Damping

Last Answer : A) Free vibration

In damped vibrations, the amplitude of the resulting vibration gradually reduces. This is due to the reason that an amount of energy is always dissipated to overcome the ________ * 1 point (A) Frictional resistance (B) Work done(C) Fluid pressure (D) Air pressure

Description : In damped vibrations, the amplitude of the resulting vibration gradually reduces. This is due to the reason that an amount of energy is always dissipated to overcome the ________ * 1 point (A) Frictional resistance (B) Work done(C) Fluid pressure (D) Air pressure

Last Answer : (A) Frictional resistance

The accelerometers are commonly used in vibration measurement due to their ___________. (A) small size and low sensitivity (B) the large size and high sensitivity (C) the large size and low sensitivity (D) small size and high sensitivity

Description : The accelerometers are commonly used in vibration measurement due to their ___________. (A) small size and low sensitivity (B) the large size and high sensitivity (C) the large size and low sensitivity (D) small size and high sensitivity

Last Answer : (D) small size and high sensitivity

The ratio of the maximum displacement of the forced vibration to the deflection due to the static force, is known as A Damping factor B Damping coefficient C Logarithmic decrement D Magnification factor

Description : The ratio of the maximum displacement of the forced vibration to the deflection due to the static force, is known as A Damping factor B Damping coefficient C Logarithmic decrement D Magnification factor

Last Answer : D Magnification factor

The ratio of the maximum displacement of the forced vibration to the deflection due to the static force is known as A Logarithmic decrement B Magnification factor C Damping factor D None of the mentioned

Description : The ratio of the maximum displacement of the forced vibration to the deflection due to the static force is known as A Logarithmic decrement B Magnification factor C Damping factor D None of the mentioned

Last Answer : B Magnification factor

The ratio of maximum displacement of the forced vibration to the deflection due to the static force, is known as A. Damping FactorB. Damping Coefficient C. Logarithmic Decrement D. Magnification Factor

Description : The ratio of maximum displacement of the forced vibration to the deflection due to the static force, is known as A. Damping FactorB. Damping Coefficient C. Logarithmic Decrement D. Magnification Factor

Last Answer : D. Magnification Factor

The ratio of the maximum displacement of the forced vibration to the deflection due to the static force, is known as a) Damping factor b) Damping coefficient c) Logarithmic decrement d) Magnification factor

Description : The ratio of the maximum displacement of the forced vibration to the deflection due to the static force, is known as a) Damping factor b) Damping coefficient c) Logarithmic decrement d) Magnification factor

Last Answer : d) Magnification factor

The accelerometers are commonly used in vibration measurement due to their ___________. (A) small size and low sensitivity (B) the large size and high sensitivity (C) the large size and low sensitivity (D) small size and high sensitivity

Description : The accelerometers are commonly used in vibration measurement due to their ___________. (A) small size and low sensitivity (B) the large size and high sensitivity (C) the large size and low sensitivity (D) small size and high sensitivity

Last Answer : (D) small size and high sensitivity

Maximum displacement due to forced vibration is ____________ the displacement due to static force. (A) inversely proportional to (B) directly proportional to (C) independent of (D) none of the above

Description : Maximum displacement due to forced vibration is ____________ the displacement due to static force. (A) inversely proportional to (B) directly proportional to (C) independent of (D) none of the above

Last Answer : (B) directly proportional to