Which of the following is true? A : Robot minimize the labor cost B : Robot minimize the productivity C : Robot minimize the life of production machine D : Rotot minimize the qualtiy of work

Which of the following is true?
A : Robot minimize the labor cost
B : Robot minimize the productivity
C : Robot minimize the life of production machine
D : Rotot minimize the qualtiy of work
by

1 Answer

Answer :

A : Robot minimize the labor cost
by

Related questions

The main objective (s) of Industrial robot is to A : To maximize the labor requirement B : To increase productivity C : To decrease the life of production machines D : To decrease productivity

Description : The main objective (s) of Industrial robot is to A : To maximize the labor requirement B : To increase productivity C : To decrease the life of production machines D : To decrease productivity

Last Answer : B : To increase productivity

3-The main objective(s) of Industrial robot is to (A) To minimise the labour requirement (B) To increase productivity (C) To enhance the life of production machines (D) All of the above

Description : 3-The main objective(s) of Industrial robot is to (A) To minimise the labour requirement (B) To increase productivity (C) To enhance the life of production machines (D) All of the above

Last Answer : 4

The Hawthorne studies: (a) Found that to increase worker efficiency, management must analyze and minimize the motions required to complete a task. (b) Found that when workers know they are being watched, their productivity increases. (c) Found that a worker is inherently lazy and will use any excuse not to perform their duties. (d) Found that workers accept a managerial directive only if it is acceptable in terms of their personal interests.

Description : The Hawthorne studies: (a) Found that to increase worker efficiency, management must analyze and minimize the motions required to complete a task. (b) Found that when workers know they are ... that workers accept a managerial directive only if it is acceptable in terms of their personal interests.

Last Answer : (b) Found that when workers know they are being watched, their productivity increases. 

Service location decisions typically attempt to a. minimize costs b. consider global consider global implications implications c. decrease decrease labor costs d. be environmentally environmentally friendly friendly e. none of the above

Description : Service location decisions typically attempt to a. minimize costs b. consider global consider global implications implications c. decrease decrease labor costs d. be environmentally environmentally friendly friendly e. none of the above

Last Answer : e. none of the above

The factor The factors involved in locatio s involved in location decisions include n decisions include a)Foreign exchange b)Attitudes c)Labor productivity d)All of the above e) None of the above

Description : The factor The factors involved in locatio s involved in location decisions include n decisions include a)Foreign exchange b)Attitudes c)Labor productivity d)All of the above e) None of the above

Last Answer : d)All of the above

Which of the following is usually not one of the top considerations in choosing a manufacturing location? a. availability availability of labor and labor productivity b. productivity b. exchange rates exchange rates c. attitude attitude of governmental governmental units d. zoning regulations e. entertainment entertainment opportunities

Description : Which of the following is usually not one of the top considerations in choosing a manufacturing location? a. availability availability of labor and labor productivity b. ... attitude attitude of governmental governmental units d. zoning regulations e. entertainment entertainment opportunities

Last Answer : d. zoning regulations

Disguised unemployment means: A. Unemployment in agriculture B. Unemployment due to recession C. Unemployment due to downturn in business activity D. Marginal Productivity of Labor (MPL) is zero.

Description : Disguised unemployment means: A. Unemployment in agriculture B. Unemployment due to recession C. Unemployment due to downturn in business activity D. Marginal Productivity of Labor (MPL) is zero.

Last Answer : C. Unemployment due to downturn in business activity

Which of the following inputs has the greatest potential to increase productivity? (a) labor ; (b) management ; (c) capital ; (d) None of the above

Description : Which of the following inputs has the greatest potential to increase productivity? (a) labor ; (b) management ; (c) capital ; (d) None of the above 

Last Answer : (b) management ;

Disguised unemployment means (a) Unemployment in agriculture ; (b) Unemployment due to recession ;(c) Unemployment due to downturn in business activity ; (d) Marginal Productivity of Labor (MPL) is zero.

Description : Disguised unemployment means (a) Unemployment in agriculture ; (b) Unemployment due to recession ;(c) Unemployment due to downturn in business activity ; (d) Marginal Productivity of Labor (MPL) is zero.

Last Answer : ;(c) Unemployment due to downturn in business activity ;

The following is true for a Robot & NC Machine A : Similar power drive technology is used in both B : Different feedback systems are used in both C : Programming is same for both D : Programming is not same for both

Description : The following is true for a Robot & NC Machine A : Similar power drive technology is used in both B : Different feedback systems are used in both C : Programming is same for both D : Programming is not same for both

Last Answer : A : Similar power drive technology is used in both

The following is true for a Robot & NC Machine A : Similar power drive technology is used in both B : Different feedback systems are used in both C : Programming is same for both D : Programming is not same for both

Description : The following is true for a Robot & NC Machine A : Similar power drive technology is used in both B : Different feedback systems are used in both C : Programming is same for both D : Programming is not same for both

Last Answer : A : Similar power drive technology is used in both

The objective of energy management is ____ A. To achieve and maintain optimum energy procurement and utilization throughout the organization B. To minimize the energy cost without affecting production and quality C. To minimize the environmental effects D. All of the above

Description : The objective of energy management is ____ A. To achieve and maintain optimum energy procurement and utilization throughout the organization B. To minimize the energy cost without affecting production and quality C. To minimize the environmental effects D. All of the above

Last Answer : All of the above

SONAR is example of A : Video sensing B : GPS C : Robot D : Machine

Description : SONAR is example of A : Video sensing B : GPS C : Robot D : Machine

Last Answer : B : GPS

SONAR is example of A : Video sensing B : GPS C : Robot D : Machine

Description : SONAR is example of A : Video sensing B : GPS C : Robot D : Machine

Last Answer : B : GPS

SONAR is example of A : Video sensing B : GPS C : Robot D : Machine

Description : SONAR is example of A : Video sensing B : GPS C : Robot D : Machine

Last Answer : B : GPS

Which of the following costs would be considered a fixed cost? A. Raw materials. B. Depreciation. C. Bad-debt losses. D. Production labor.

Description : Which of the following costs would be considered a fixed cost? A. Raw materials. B. Depreciation. C. Bad-debt losses. D. Production labor.

Last Answer : B. Depreciation.

Which three factors drive labor cost? a. Production capacity b. Wage and benefit rates c. Automation levels d. Second shift/Overtime costs e. b, c, d

Description : Which three factors drive labor cost? a. Production capacity b. Wage and benefit rates c. Automation levels d. Second shift/Overtime costs e. b, c, d

Last Answer : e. b, c, d

ncreasing a product’s reliability will result in which of the following changes to production costs? a. Lower material cost b. Higher material cost c. Higher labor costs d. Lower labor costs e. Reducing MTBF has no effect on costs of production

Description : ncreasing a product’s reliability will result in which of the following changes to production costs? a. Lower material cost b. Higher material cost c. Higher labor costs d. Lower labor costs e. Reducing MTBF has no effect on costs of production

Last Answer : b. Higher material cost

The following is true for a Robot and NC Machine (A) Similar power drive technology is used in both (B) Different feedback systems are used in both (C) Programming is same for both (D) All of the above

Description : The following is true for a Robot and NC Machine (A) Similar power drive technology is used in both (B) Different feedback systems are used in both (C) Programming is same for both (D) All of the above

Last Answer : A

An industrial robot is not a general purpose programmable machine possessing certain human like characteristics. (A) True (B) Fals

Description : An industrial robot is not a general purpose programmable machine possessing certain human like characteristics. (A) True (B) Fals

Last Answer : B

Algorithmic cost estimation in different organisations may be different for the same application development, because a) Different organisations consider complexity factors differently b) Different organisations may use different programming languages c) Developers’ skills may vary d) Techniques for the measurement of productivity may vary e) All of the above may be true.

Description : Algorithmic cost estimation in different organisations may be different for the same application development, because a) Different organisations consider complexity factors differently b) Different organisations may use ... measurement of productivity may vary e) All of the above may be true.

Last Answer : e) All of the above may be true.

Define productivity index. State it with respect to labour, material and machine.

Description : Define productivity index. State it with respect to labour, material and machine.

Last Answer : Productivity Index:- It is used to compare the productivity during the current year with the productivity during the base year. Base year is any year which the company users or comparative study. ... key actor in economic production/operation..It is Number o units produced per cost o material.

“CNC machine is having higher productivity than general lathe machine” Justify the statement.

Description : “CNC machine is having higher productivity than general lathe machine” Justify the statement.

Last Answer : CNC machining and conventional machining aim to achieve the same end, and both start with a raw chunk of metal or plastic and shape it into a part. CNC machine is having higher productivity than ... to cut the part, while the conventional machine would require five tools and no doubt more time.

From which of the following is benefit of computer integrated manufacturing(CIM). a.Reduced lead time b.Increased production time c.Reduced productivity d.All of the above

Description : From which of the following is benefit of computer integrated manufacturing(CIM). a.Reduced lead time b.Increased production time c.Reduced productivity d.All of the above

Last Answer : a.Reduced lead time

The term "Green Revolution" has been used to indicate higher production through – (1) creation of grasslands (2) planting more trees (3) enhanced agricultural productivity per hectare (4) creation of gardens in urban areas

Description : The term "Green Revolution" has been used to indicate higher production through – (1) creation of grasslands (2) planting more trees (3) enhanced agricultural productivity per hectare (4) creation of gardens in urban areas

Last Answer : (3) enhanced agricultural productivity per hectare Explanation: The Introduction of High-yielding varieties of seeds and the increased use of fertilizers and irrigation are known collectively as the ... higher productivity was attained in areas in Green Revolution had been initiated and matured.

Which is the term used for describing the manifold increase in India's farm production and productivity?

Description : Which is the term used for describing the  manifold increase in India's farm production  and productivity?

Last Answer : Green Revolution

In an ecosystem the rate of production of organic matter during photosynthesis is termed as (a) secondary productivity (b) net productivity (c) net primary productivity (d) gross primary productivity.

Description : In an ecosystem the rate of production of organic matter during photosynthesis is termed as (a) secondary productivity (b) net productivity (c) net primary productivity (d) gross primary productivity.

Last Answer : (d) gross primary productivity.

Pick out the correct statement. (A) Deforestation helps in controlling the green house effect (B) Global warming is detrimental for increase in food productivity and may cause flood and cyclone (C) Lightening discharges are natural source of production of SO2 & H2S pollutant (D) Sulphur dioxide causes death by asphyxiation

Description : Pick out the correct statement. (A) Deforestation helps in controlling the green house effect (B) Global warming is detrimental for increase in food productivity and may cause flood and cyclone ( ... natural source of production of SO2 & H2S pollutant (D) Sulphur dioxide causes death by asphyxiation

Last Answer : (B) Global warming is detrimental for increase in food productivity and may cause flood and cyclone

Engel’s curve illustrates the relationship between (a) Consumption and Utility (b) Production and Productivity (c) Income and Consumption (d) Income and Production

Description : Engel’s curve illustrates the relationship between (a) Consumption and Utility (b) Production and Productivity (c) Income and Consumption (d) Income and Production

Last Answer : (c) Income and Consumption

Need of farm mechanization is to... a) for timely operations of agriculture activities b) to increase the production and productivity of food grains. c) efficient utilisation of inputs, water and other natural resources. d) all of the above

Description : Need of farm mechanization is to... a) for timely operations of agriculture activities b) to increase the production and productivity of food grains. c) efficient utilisation of inputs, water and other natural resources. d) all of the above

Last Answer : all of the above

What does the term WPQR means? a) Weld productivity quality review b) Weld production quality requirments c) Welding procedure

Description : What does the term WPQR means? a) Weld productivity quality review b) Weld production quality requirments c) Welding procedure

Last Answer : c) Welding procedure

Walter Shewhart is listed among the important people of operations management because of his contributions to (a) assembly line production ; (b) measuring the productivity in the service sector (c) statistical quality control ; (d) all of the above

Description : Walter Shewhart is listed among the important people of operations management because of his contributions to (a) assembly line production ; (b) measuring the productivity in the service sector (c) statistical quality control ; (d) all of the above

Last Answer : (c) statistical quality control ;

Differentiate between production and productivity

Description : Differentiate between production and productivity

Last Answer : Following points differentiates production from productivity. 1. Production is step by step transformation process of inputs into outputs having desired utility and quality whereas productivity is defined as human ... may or may not be an indicator of increase in productivity and vice versa.

Why do the robot need sensor? A : To collect information from environment B : To map environment atribute to a quantitative measurement C : only option 1 is true D : Both option 1 and 2 are true

Description : Why do the robot need sensor? A : To collect information from environment B : To map environment atribute to a quantitative measurement C : only option 1 is true D : Both option 1 and 2 are true

Last Answer : D : Both option 1 and 2 are true

Why do the robot need sensor? A : To collect information from environment B : To map environment atribute to a quantitative measurement C : only option 1 is true D : Both option 1 and 2 are true

Description : Why do the robot need sensor? A : To collect information from environment B : To map environment atribute to a quantitative measurement C : only option 1 is true D : Both option 1 and 2 are true

Last Answer : D : Both option 1 and 2 are true

Why do the robot need sensor? A : To collect information from environment B : To map environment atribute to a quantitative measurement C : only option 1 is true D : Both option 1 and 2 are true

Description : Why do the robot need sensor? A : To collect information from environment B : To map environment atribute to a quantitative measurement C : only option 1 is true D : Both option 1 and 2 are true

Last Answer : D : Both option 1 and 2 are true

Why do the robot need sensor? A : To collect information from environment B : To map environment atribute to a quantitative measurement C : only option 1 is true D : Both option 1 and 2 are true

Description : Why do the robot need sensor? A : To collect information from environment B : To map environment atribute to a quantitative measurement C : only option 1 is true D : Both option 1 and 2 are true

Last Answer : D : Both option 1 and 2 are true

While solving an assignment problem, an activity is assigned to a resource through a square with zero opportunity cost because the objective is to a. Minimize total cost of assignment b. Reduce the cost of assignment to zero c. Reduce the cost of that particular assignment to zero d. All of the above

Description : While solving an assignment problem, an activity is assigned to a resource through a square with zero opportunity cost because the objective is to a. Minimize total cost of assignment b. Reduce the cost of ... to zero c. Reduce the cost of that particular assignment to zero d. All of the above

Last Answer : c. Reduce the cost of that particular assignment to zero

To minimize energy cost " is an objective of which of the following a) Bureau of energy efficiency (BEE) b) Standard and labelling standard (HVAC) c) Energy Management d) None of the above

Description : To minimize energy cost " is an objective of which of the following a) Bureau of energy efficiency (BEE) b) Standard and labelling standard (HVAC) c) Energy Management d) None of the above

Last Answer : Energy Management 

Which of the following statements concerning monitoring techniques in the intensive care unit are true? A. Pulmonary artery and pulmonary capillary wedge pressure readings should be made at end inspiration, to minimize ventilatory artifacts. B. Continuous SvO 2 monitoring based on the technique of reflectance spectrophotometry has been shown to be accurate and reliable. C. Direct measurement of gastric intramucosal pH can be provided by gastrointestinal tonometry. D. Hyperlactatemia may be seen in a number of clinical conditions not associated with tissue hypoxia, including liver disease and hypermetabolic states.

Description : Which of the following statements concerning monitoring techniques in the intensive care unit are true? A. Pulmonary artery and pulmonary capillary wedge pressure readings should be made ... clinical conditions not associated with tissue hypoxia, including liver disease and hypermetabolic states.

Last Answer : Answer: BD DISCUSSION: Many different monitoring techniques may be used to assess the adequacy of therapy for shock. The pulmonary artery catheter can provide important hemodynamic and oxygen ... also be seen with liver disease, toxin ingestion, and hypermetabolic states not associated with shock

What is the name for space inside which a robot unit operates? A : Environment B : Spatial base C : Work envelop D : Exclusion zone

Description : What is the name for space inside which a robot unit operates? A : Environment B : Spatial base C : Work envelop D : Exclusion zone

Last Answer : C : Work envelop

Which of the following work is done by General purpose Robot? A : Part drive B : Welding C : Spray picking D : Part panting

Description : Which of the following work is done by General purpose Robot? A : Part drive B : Welding C : Spray picking D : Part panting

Last Answer : B : Welding

Which of the following work is done by General purpose Robot? A : Part drive B : Welding C : Spray picking D : Part panting

Description : Which of the following work is done by General purpose Robot? A : Part drive B : Welding C : Spray picking D : Part panting

Last Answer : B : Welding

Why is the law of diminishing marginal returns true? a. specialization and division of labor b. spreading the average fixed cost c. limited capital d. all factors being variable in the long-run

Description : Why is the law of diminishing marginal returns true? a. specialization and division of labor b. spreading the average fixed cost c. limited capital d. all factors being variable in the long-run

Last Answer : c. limited capital

____ is a general purpose, programmable machine possessing certain human like characteristics a.Robot b.Manipulator c.Gripper d.None of the above

Description : ____ is a general purpose, programmable machine possessing certain human like characteristics a.Robot b.Manipulator c.Gripper d.None of the above

Last Answer : a.Robot

1. Which of the following is not the categorization of Robot? o 1. Robot is a manipulator which controlled by computer program. o 2. Robot is an automatic machine that has no use of humans. o 3. Robots is a self controlled machine. o 4. Semi automated machine called robot.

Description : 1. Which of the following is not the categorization of Robot? o 1. Robot is a manipulator which controlled by computer program. o 2. Robot is an automatic machine that has no use of humans. o 3. Robots is a self controlled machine. o 4. Semi automated machine called robot.

Last Answer : 1

From Which of the following is application of robot. (A) Welding (B) Machine loading & unloading (C) Both (A) & (B) (D) None of the above

Description : From Which of the following is application of robot. (A) Welding (B) Machine loading & unloading (C) Both (A) & (B) (D) None of the above

Last Answer : C

Why is labor an active factor of production?

Description : Why is labor an active factor of production?

Last Answer : it can be increased or decreased based upon demand

How would the system described abroive help to cut labor costs and make factory production more effieient?

Description : How would the system described abroive help to cut labor costs and make factory production more effieient?

Last Answer : Need answer

Why labor is different from other factor of production?

Description : Why labor is different from other factor of production?

Last Answer : Yes because of the human factor.