ncreasing a product’s reliability will result in which of the following changes to production costs? a. Lower material cost b. Higher material cost c. Higher labor costs d. Lower labor costs e. Reducing MTBF has no effect on costs of production

ncreasing a product’s reliability will result in which of the following changes to production  costs?
a. Lower material cost
b. Higher material cost
c. Higher labor costs
d. Lower labor costs
e. Reducing MTBF has no effect on costs of production
by

1 Answer

Answer :

b. Higher material cost
by

Related questions

Labor costs are driven by three factors: a. wage and benefit rates, automation levels, and MTBF. b. wage and benefit rates, positioning, and second shift. c. wage and benefit rates, second shift, and MTBF. d. wage and benefit rates, automation levels, and second shift. e. wage and benefit rates, second shift, and material costs.

Description : Labor costs are driven by three factors: a. wage and benefit rates, automation levels, and MTBF. b. wage and benefit rates, positioning, and second shift. c. wage and benefit rates, second ... , automation levels, and second shift. e. wage and benefit rates, second shift, and material costs.

Last Answer : d. wage and benefit rates, automation levels, and second shift.

All of the following are direct implications of hiring a second shift except: a. increased production capacity. b. paying higher wages to second shift. c. training costs. d. increased MTBF. e. recruitment costs.

Description : All of the following are direct implications of hiring a second shift except: a. increased production capacity. b. paying higher wages to second shift. c. training costs. d. increased MTBF. e. recruitment costs.

Last Answer : d. increased MTBF.

What are the drivers of Material Costs? a. Higher performance b. Smaller size c. Higher Mean Time Between Failure (MTBF) d. All of the above e. None of the above

Description : What are the drivers of Material Costs? a. Higher performance b. Smaller size c. Higher Mean Time Between Failure (MTBF) d. All of the above e. None of the above

Last Answer : d. All of the above

What is one way to lower material costs? a. decrease MTBF b. increase capacity c. increase automation d. none of the above

Description : What is one way to lower material costs? a. decrease MTBF b. increase capacity c. increase automation d. none of the above

Last Answer : a. decrease MTBF

In the Capstone® simulation, what are the components of a product’s material cost? a. Cost of Inventory on hand and the cost to store it b. Reliability component cost and positioning component cost c. The costs associated with inventory, shipping and handling d. Level of automation and product reliability e. None of the above

Description : In the Capstone® simulation, what are the components of a product's material cost? a. Cost of Inventory on hand and the cost to store it b. Reliability component cost and positioning component ... , shipping and handling d. Level of automation and product reliability e. None of the above

Last Answer : b. Reliability component cost and positioning component cost

How much does it cost for MTBF per 1,000 hours of reliability? a. $0.50 b. $0.40 c. $0.30 d. $0.20 e. $0.10

Description : How much does it cost for MTBF per 1,000 hours of reliability? a. $0.50 b. $0.40 c. $0.30 d. $0.20 e. $0.10

Last Answer : c. $0.30

The reliability component cost of a product with a 17,000 hour MTBF rating is: a. $5.10. b. $17.00. c. $51.00. d. $170. e. cost cannot be determined with information given.

Description : The reliability component cost of a product with a 17,000 hour MTBF rating is: a. $5.10. b. $17.00. c. $51.00. d. $170. e. cost cannot be determined with information given.

Last Answer : a. $5.10.

Higher automation leads to lower production costs and has what effect on repositioning a product on the perceptual map? a. makes it more difficult and expensive b. makes it easier and cheaper c. no effect d. eliminates repositioning

Description : Higher automation leads to lower production costs and has what effect on repositioning a product on the perceptual map? a. makes it more difficult and expensive b. makes it easier and cheaper c. no effect d. eliminates repositioning

Last Answer : a. makes it more difficult and expensive

The relative cost of a product’s material cost increases as: a. size is increased. b. performance is decreased. c. MTBF is raised. d. automation stays the same. e. all of the above.

Description : The relative cost of a product’s material cost increases as: a. size is increased. b. performance is decreased. c. MTBF is raised. d. automation stays the same. e. all of the above.

Last Answer : c. MTBF is raised.

R&D completion time can be diminished a. by repositioning a product. b. the more a company changes a product’s MTBF. c. when several products are put into R&D at the same time. d. when a company takes advantage of existing technology. e. none of the above.

Description : R&D completion time can be diminished a. by repositioning a product. b. the more a company changes a product’s MTBF. c. when several products are put into R&D at the same time. d. when a company takes advantage of existing technology. e. none of the above.

Last Answer : d. when a company takes advantage of existing technology.

A new unit of capacity costs $6 for the floor space plus $4 times a. hourly wage. b. automation rating. c. unit cost. d. MTBF. e. $0.65.

Description : A new unit of capacity costs $6 for the floor space plus $4 times a. hourly wage. b. automation rating. c. unit cost. d. MTBF. e. $0.65.

Last Answer : b. automation rating.

Which three factors drive labor cost? a. Production capacity b. Wage and benefit rates c. Automation levels d. Second shift/Overtime costs e. b, c, d

Description : Which three factors drive labor cost? a. Production capacity b. Wage and benefit rates c. Automation levels d. Second shift/Overtime costs e. b, c, d

Last Answer : e. b, c, d

TQM initiatives a. improve business procedures, resulting in improved efficiencies and cost structures. b. improve product quality while reducing the time and resources required to design, manufacture, warehouse and ship products. c. improve business procedures and product quality, resulting in improved efficiencies and costs structures. d. improve product quality resulting in improved cost structures. e. improve product quality and business procedures.

Description : TQM initiatives a. improve business procedures, resulting in improved efficiencies and cost structures. b. improve product quality while reducing the time and resources required to design, ... quality resulting in improved cost structures. e. improve product quality and business procedures.

Last Answer : b. improve product quality while reducing the time and resources required to design, manufacture, warehouse and ship products.

This process management initiative reduces material cost and, to a lesser degree, labor costs. a. Concurrent Engineering (CCE)/Six Sigma b. Benchmarking c. Continuous Product Improvement systems (CPI) d. Channel Support systems e. Quality Initiative Training (QIT)

Description : This process management initiative reduces material cost and, to a lesser degree, labor costs. a. Concurrent Engineering (CCE)/Six Sigma b. Benchmarking c. Continuous Product Improvement systems (CPI) d. Channel Support systems e. Quality Initiative Training (QIT)

Last Answer : c. Continuous Product Improvement systems (CPI)

Within the process management initiatives, concurrent engineering a. reduces material cost, inventors’ carrying costs and administrative overhead. b. reduces labor costs. c. increases the effectiveness of the sales budget and therefore demand. d. reduces R&D cycle time. e. none of the above.

Description : Within the process management initiatives, concurrent engineering a. reduces material cost, inventors’ carrying costs and administrative overhead. b. reduces labor costs. c. increases the effectiveness of the sales budget and therefore demand. d. reduces R&D cycle time. e. none of the above.

Last Answer : d. reduces R&D cycle time.

Within the Process Management Initiatives, channel support systems a. reduce material cost. b. reduce labor costs. c. increase demand. d. reduce R&D cycle time. e. none of the above.

Description : Within the Process Management Initiatives, channel support systems a. reduce material cost. b. reduce labor costs. c. increase demand. d. reduce R&D cycle time. e. none of the above.

Last Answer : c. increase demand.

Process Management Initiatives a. improve business procedures, resulting in improved efficiencies and cost structures. b. improve product quality while reducing the time and resources required to design, manufacture, warehouse and ship products. c. improve business procedures and product quality, resulting in improved efficiencies and costs structures. d. improve product quality and business procedures.

Description : Process Management Initiatives a. improve business procedures, resulting in improved efficiencies and cost structures. b. improve product quality while reducing the time and resources required ... improved efficiencies and costs structures. d. improve product quality and business procedures.

Last Answer : a. improve business procedures, resulting in improved efficiencies and cost structures.

Investing in Channel Support Systems can a. increase demand. b. reduce R&D cycle time. c. reduce material costs. d. reduce labor costs. e. reduce administrative costs.

Description : Investing in Channel Support Systems can a. increase demand. b. reduce R&D cycle time. c. reduce material costs. d. reduce labor costs. e. reduce administrative costs.

Last Answer : a. increase demand.

Investing in Vendor Just In Time can a. reduce material costs and R&D cycle time. b. reduce administrative costs and labor costs. c. reduce R&D cycle time and increase demand. d. reduce material costs and administrative costs. e. reduce material costs and increase demand.

Description : Investing in Vendor Just In Time can a. reduce material costs and R&D cycle time. b. reduce administrative costs and labor costs. c. reduce R&D cycle time and increase demand. d. reduce material costs and administrative costs. e. reduce material costs and increase demand.

Last Answer : d. reduce material costs and administrative costs.

Quality Initiative Training can a. increase demand. b. decrease R&D cycle time. c. decrease material costs. d. decrease labor costs. e. decrease administrative costs.

Description : Quality Initiative Training can a. increase demand. b. decrease R&D cycle time. c. decrease material costs. d. decrease labor costs. e. decrease administrative costs.

Last Answer : d. decrease labor costs.

The TQM initiative reduces material costs and labor costs. a. Concurrent Engineering (CCE)/Six Sigma b. Benchmarking c. Continuous Product Improvement systems (CPI) d. Channel Support systems e. Quality Initiative Training (QIT)

Description : The TQM initiative reduces material costs and labor costs. a. Concurrent Engineering (CCE)/Six Sigma b. Benchmarking c. Continuous Product Improvement systems (CPI) d. Channel Support systems e. Quality Initiative Training (QIT)

Last Answer : a. Concurrent Engineering (CCE)/Six Sigma

n Capstone® a. the terms age and perceived age are not used interchangeably. b. the term MTBF means multiple transient business format. c. the terms age and perceived age are used interchangeably. d. all products will eventually have to be retired. e. none of the above.

Description : n Capstone® a. the terms age and perceived age are not used interchangeably. b. the term MTBF means multiple transient business format. c. the terms age and perceived age are used interchangeably. d. all products will eventually have to be retired. e. none of the above.

Last Answer : c. the terms age and perceived age are used interchangeably.

Investing in CCE/Six Sigma can a. reduce labor and administrative costs. b. increase demand and reduce labor costs. c. reduce labor material costs. d. increase demand.

Description : Investing in CCE/Six Sigma can a. reduce labor and administrative costs. b. increase demand and reduce labor costs. c. reduce labor material costs. d. increase demand.

Last Answer : c. reduce labor material costs.

Investing in CPI can a. reduce administrative costs. b. reduce material and administrative costs. c. reduce material costs. d. reduce labor costs and reduce R&D cycle time.

Description : Investing in CPI can a. reduce administrative costs. b. reduce material and administrative costs. c. reduce material costs. d. reduce labor costs and reduce R&D cycle time.

Last Answer : c. reduce material costs.

What does not drive length of R&D project? a. The product's automation level on the Production line. b. The amount of money You are willing to spend on it. c. The number of R&D projects underway at the same time. d. The proximity of the product's new location to an existing product in your company's line. e. The labor strike.

Description : What does not drive length of R&D project? a. The product's automation level on the Production line. b. The amount of money You are willing to spend on it. c. The number of R&D projects underway ... of the product's new location to an existing product in your company's line. e. The labor strike.

Last Answer : The labor strike.

.If a product’s Price was $20, its Material $8, and its Labor $7, the Margin Per Unit would be: a. $12. b. $13. c. $1. d. $5.

Description : .If a product’s Price was $20, its Material $8, and its Labor $7, the Margin Per Unit would be: a. $12. b. $13. c. $1. d. $5.

Last Answer : d. $5.

Investing in Quality Function Deployment Effort can a. reduce labor and administrative costs. b. increase demand and reduce labor costs. c. reduce R&D cycle time and increase demand. d. reduce R&D cycle time and enhance the effectiveness of the promo and sales Budgets. e. increase demand.

Description : Investing in Quality Function Deployment Effort can a. reduce labor and administrative costs. b. increase demand and reduce labor costs. c. reduce R&D cycle time and increase demand. d. reduce R&D cycle time and enhance the effectiveness of the promo and sales Budgets. e. increase demand.

Last Answer : d. reduce R&D cycle time and enhance the effectiveness of the promo and sales Budgets.

Budgeting money to Quality initiative will lead to these outcomes except: a. decrease R&D time. b. increase Demand. c. increase Labor Costs. d. increase efficiency. e. produce administrative savings.

Description : Budgeting money to Quality initiative will lead to these outcomes except: a. decrease R&D time. b. increase Demand. c. increase Labor Costs. d. increase efficiency. e. produce administrative savings.

Last Answer : c. increase Labor Costs.

Investments in training leads to a __________ and _________. a. higher costs, higher turnover b. higher productivity, lower turnover c. lower productivity, lower turnover d. none of the above

Description : Investments in training leads to a __________ and _________. a. higher costs, higher turnover b. higher productivity, lower turnover c. lower productivity, lower turnover d. none of the above

Last Answer : b. higher productivity, lower turnover

Changing MTBF will: a. have no impact on Perceived Age. b. increase Perceived Age. c. decrease Perceived Age. d. change Perceived Age. e. is undetermined.

Description : Changing MTBF will: a. have no impact on Perceived Age. b. increase Perceived Age. c. decrease Perceived Age. d. change Perceived Age. e. is undetermined.

Last Answer : a. have no impact on Perceived Age.

Lowering the automation level will result in a. receiving a cash payment of $4 per unit of capacity. b. a tax credit. c. a charge. d. immediate changes to production lines. e. none of the above.

Description : Lowering the automation level will result in a. receiving a cash payment of $4 per unit of capacity. b. a tax credit. c. a charge. d. immediate changes to production lines. e. none of the above.

Last Answer : c. a charge.

Investing in Concurrent Engineering can a. reduce R&D cycle time. b. reduce labor and administrative costs. c. increase demand and reduce labor costs d. reduce R&D cycle time and increase demand.

Description : Investing in Concurrent Engineering can a. reduce R&D cycle time. b. reduce labor and administrative costs. c. increase demand and reduce labor costs d. reduce R&D cycle time and increase demand.

Last Answer : a. reduce R&D cycle time.

This process management initiative reduces labor costs. a. Benchmarking b. Vendor/Just-in-Time Inventory (JIT) c. Channel Support systems d. Quality Initiative Training (QIT)

Description : This process management initiative reduces labor costs. a. Benchmarking b. Vendor/Just-in-Time Inventory (JIT) c. Channel Support systems d. Quality Initiative Training (QIT)

Last Answer : d. Quality Initiative Training (QIT)

How is Contribution Margin calculated? a. Material Cost – Labor Cost b. Price*(Material Cost-Labor Cost) c. Price – (Material cost + Labor cost) d. Price – Material Cost e. Profit –(Material Cost + Labor Cost)

Description : How is Contribution Margin calculated? a. Material Cost – Labor Cost b. Price*(Material Cost-Labor Cost) c. Price – (Material cost + Labor cost) d. Price – Material Cost e. Profit –(Material Cost + Labor Cost)

Last Answer : c. Price – (Material cost + Labor cost)

If the price/product is $10 and the material cost/product is $2 and the labor cost/product is $3, what is the gross margin/product? a. $6 b. $2 c. $4 d. $3 e. none of the above

Description : If the price/product is $10 and the material cost/product is $2 and the labor cost/product is $3, what is the gross margin/product? a. $6 b. $2 c. $4 d. $3 e. none of the above

Last Answer : e. none of the above

Benchmarking reduces a. Material cost. b. Research and Development time. c. Labor Cost. d. Administrative Cost. e. Demand.

Description : Benchmarking reduces a. Material cost. b. Research and Development time. c. Labor Cost. d. Administrative Cost. e. Demand.

Last Answer : d. Administrative Cost.

The customer survey score is driven by a. market share. b. price. c. 4P’s. d. price and market share. e. perceptual map, MTBF and price.

Description : The customer survey score is driven by a. market share. b. price. c. 4P’s. d. price and market share. e. perceptual map, MTBF and price.

Last Answer : c. 4P’s.

MTBF is measured in a. day increments. b. hour increments. c. minute increments. d. 30-minute increments. e. 15-minute increments.

Description : MTBF is measured in a. day increments. b. hour increments. c. minute increments. d. 30-minute increments. e. 15-minute increments.

Last Answer : b. hour increments.

A product’s __________ does not play a role in the rough cut a. Positioning b. Price c. Reliability d. Age e. MBTF

Description : A product’s __________ does not play a role in the rough cut a. Positioning b. Price c. Reliability d. Age e. MBTF

Last Answer : d. Age

Using the R&D Spreadsheet to design your products, you have which of the following projects to choose from? a. Repositioning b. Invention c. Reliability adjustment d. All of the above e. None of the above

Description : Using the R&D Spreadsheet to design your products, you have which of the following projects to choose from? a. Repositioning b. Invention c. Reliability adjustment d. All of the above e. None of the above

Last Answer : d. All of the above

R&D projects can drive a product’s: a. size. b. age. c. reliability. d. performance. e. all of the above.

Description : R&D projects can drive a product’s: a. size. b. age. c. reliability. d. performance. e. all of the above.

Last Answer : e. all of the above.

What’s the measure for product reliability? a. Return rates of products sold b. Customers’ happiness statements c. Expected time a product lasts d. Price e. All of the above

Description : What’s the measure for product reliability? a. Return rates of products sold b. Customers’ happiness statements c. Expected time a product lasts d. Price e. All of the above

Last Answer : c. Expected time a product lasts

The Perceptual Map is a. a marketing tool used to compare products against customer perceptions. b. a marketing tool used to compare performance against size. c. a marketing tool used to compare reliability against price. d. a marketing tool used to compare age against position. e. a marketing tool used to compare time against motion.

Description : The Perceptual Map is a. a marketing tool used to compare products against customer perceptions. b. a marketing tool used to compare performance against size. c. a marketing tool used to compare ... used to compare age against position. e. a marketing tool used to compare time against motion.

Last Answer : a. a marketing tool used to compare products against customer perceptions. b. a marketing tool used to compare performance against size.

What is the total cost in dollars for adding 1.0 million units of capacity to a production line with an automation level of 1.0 and floor space costs per unit of $6? Assume automation costs per unit of $4. a. $26 million b. $10 million c. $2.6 million d. $1 million e. none of the above

Description : What is the total cost in dollars for adding 1.0 million units of capacity to a production line with an automation level of 1.0 and floor space costs per unit of $6? Assume automation costs per unit of $4. a. $26 million b. $10 million c. $2.6 million d. $1 million e. none of the above

Last Answer : b. $10 million

The company’s negotiation starting position for wages a. is never more than 150% of the current contract. b. is always lower than what Labor expects. c. is always exactly 80% of the current contract. d. is always half of the increase workers are asking for. e. none of these.

Description : The company’s negotiation starting position for wages a. is never more than 150% of the current contract. b. is always lower than what Labor expects. c. is always exactly 80% of the current contract. d. is always half of the increase workers are asking for. e. none of these.

Last Answer : a. is never more than 150% of the current contract.

The following represent core company activities that must be addressed each year except: a. Research and Development. b. Marketing. c. Finance. d. Labor Negotiations. e. Production.

Description : The following represent core company activities that must be addressed each year except: a. Research and Development. b. Marketing. c. Finance. d. Labor Negotiations. e. Production.

Last Answer : d. Labor Negotiations.

This process management initiative reduces material costs and administrative overhead. a. Benchmarking b. Vendor/Just-in-Time Inventory (JIT) c. Continuous Product Improvement systems (CPI) d. Channel Support systems e. Quality Initiative Training (QIT)

Description : This process management initiative reduces material costs and administrative overhead. a. Benchmarking b. Vendor/Just-in-Time Inventory (JIT) c. Continuous Product Improvement systems (CPI) d. Channel Support systems e. Quality Initiative Training (QIT)

Last Answer : b. Vendor/Just-in-Time Inventory (JIT)

Looking at the production, if the potential bar is higher than the actual one, a. the company should spend more budget in sales. b. the company over produced and missed sales opportunities. c. the company produced the right amount and missed no sales opportunities. d. the company under produced and missed sales opportunities. e. the company should spend more budget in marketing.

Description : Looking at the production, if the potential bar is higher than the actual one, a. the company should spend more budget in sales. b. the company over produced and missed sales ... company under produced and missed sales opportunities. e. the company should spend more budget in marketing.

Last Answer : d. the company under produced and missed sales opportunities.

Labor will strike for a maximum: a. 10 days. b. 84 days. c. 60 days. d. 30 days. e. There is no strike maximum.

Description : Labor will strike for a maximum: a. 10 days. b. 84 days. c. 60 days. d. 30 days. e. There is no strike maximum.

Last Answer : b. 84 days.

Your workers go on strike because they have demanded $20/hour and your wage negotiation ceiling is at $18/hour. Assuming that there are no other labor demands, how long will the strike last? a. 2 weeks b. 4 weeks c. 8 weeks d. 16 weeks e. There is no way to determine how long the strike will last.

Description : Your workers go on strike because they have demanded $20/hour and your wage negotiation ceiling is at $18/hour. Assuming that there are no other labor demands, how long will the strike last? a. 2 weeks b. ... . 8 weeks d. 16 weeks e. There is no way to determine how long the strike will last.

Last Answer : a. 2 weeks