To minimize energy cost " is an objective of which of the following a) Bureau of energy efficiency (BEE) b) Standard and labelling standard (HVAC) c) Energy Management d) None of the above

To minimize energy cost " is an objective of which of the following a) Bureau of energy efficiency (BEE) b) Standard and labelling standard (HVAC) c) Energy Management d) None of the above
by

1 Answer

Answer :

Energy Management 

by

Related questions

The Bureau of Energy Efficiency initiated the standard and labelling programme for equipments & appliances in A. 2001. B. 2004. C. 2006. D. 2008.

Description : The Bureau of Energy Efficiency initiated the standard and labelling programme for equipments & appliances in A. 2001. B. 2004. C. 2006. D. 2008.

Last Answer : 2006

Full form of BEE is ____ A. Basic Electronics and Engineering C. Bureau of Electric Energy B. Bureau of Electric Efficiency D. Bureau of Energy Efficiency

Description : Full form of BEE is ____ A. Basic Electronics and Engineering C. Bureau of Electric Energy B. Bureau of Electric Efficiency D. Bureau of Energy Efficiency

Last Answer : Bureau of Electric Efficiency

BEE (in star rating) stand for. A) Bureau of Earth Efficiency . C) Bicycle energy expenditure B) Bureau of Energy Efficiency . D) Bureau of Energy Expenditure

Description : BEE (in star rating) stand for. A) Bureau of Earth Efficiency . C) Bicycle energy expenditure B) Bureau of Energy Efficiency . D) Bureau of Energy Expenditure

Last Answer : Bureau of Energy Efficiency

What is the full form of BEE? A) Basic electrical and electronics. C) Bureau of energy efficiency. B) Bureau of energy equipment. D) all of the above.

Description : What is the full form of BEE? A) Basic electrical and electronics. C) Bureau of energy efficiency. B) Bureau of energy equipment. D) all of the above.

Last Answer : Bureau of energy efficiency.

The objective of energy management is ____ A. To achieve and maintain optimum energy procurement and utilization throughout the organization B. To minimize the energy cost without affecting production and quality C. To minimize the environmental effects D. All of the above

Description : The objective of energy management is ____ A. To achieve and maintain optimum energy procurement and utilization throughout the organization B. To minimize the energy cost without affecting production and quality C. To minimize the environmental effects D. All of the above

Last Answer : All of the above

is the Objective of the energy management from the following :- a) To give each product a label b) To evolve minimum energy consumption c) To minimize environmental effects d) To achieve optimum energy procurement

Description : is the Objective of the energy management from the following :- a) To give each product a label b) To evolve minimum energy consumption c) To minimize environmental effects d) To achieve optimum energy procurement

Last Answer :  To evolve minimum energy consumption 

Full form of BEE a. Bureau of energy efficient b. Basic electrical and electronics c. Basic thermal engineering d. None of the above.

Description : Full form of BEE a. Bureau of energy efficient b. Basic electrical and electronics c. Basic thermal engineering d. None of the above.

Last Answer : Bureau of energy efficient

The S & L activity has been identified as a key activity for energy efficiency improvement which stands for A. Standards & Listening. B. Standards & Labelling. C. Standards & Logistics. D. Standards & Lateral.

Description : The S & L activity has been identified as a key activity for energy efficiency improvement which stands for A. Standards & Listening. B. Standards & Labelling. C. Standards & Logistics. D. Standards & Lateral.

Last Answer : Standards & Labelling.

The standards and labelings scheme (S&L) is one of the major thurst areas of . a) BEE b) ISEER c) HVAC d) ISO

Description : The standards and labelings scheme (S&L) is one of the major thurst areas of . a) BEE b) ISEER c) HVAC d) ISO

Last Answer : bee

BEE Energy efficiency ratings are based on a) Savings in cost c) savings in electricity consumption b) Savings in input d) savings in machinery

Description : BEE Energy efficiency ratings are based on a) Savings in cost c) savings in electricity consumption b) Savings in input d) savings in machinery

Last Answer : savings in electricity consumption

The Bureau of Energy Efficiency launched a) 2005 c) 2006 b) 2010 d) 2007

Description : The Bureau of Energy Efficiency launched a) 2005 c) 2006 b) 2010 d) 2007

Last Answer : 2006

Bureau of Energy Efficiency was founded on ........ c. 1 March 2001 c) 1 March 2002 d. 4 March 2001 d) 4 March 2002

Description : Bureau of Energy Efficiency was founded on ........ c. 1 March 2001 c) 1 March 2002 d. 4 March 2001 d) 4 March 2002

Last Answer : 1 MARCH 2002

The standard and labelling scheme is invoked for 20 equipment from which __________ number of equipment are mandatory. A. 30. B. 20. C. 10. D. 15.

Description : The standard and labelling scheme is invoked for 20 equipment from which __________ number of equipment are mandatory. A. 30. B. 20. C. 10. D. 15.

Last Answer : 20

Definition of energy management given by cape hart , turner and Kennedy is ____ A. The Judicious and effective use of energy to maximize profits and enhance competitive position B. The Judicious and effective use of energy to minimize profits and enhance competitive position C. The systematic approach for decision making in area of energy management. D. All of the above

Description : Definition of energy management given by cape hart , turner and Kennedy is ____ A. The Judicious and effective use of energy to maximize profits and enhance competitive position B. The Judicious and ... The systematic approach for decision making in area of energy management. D. All of the above

Last Answer : The Judicious and effective use of energy to maximize profits and enhance competitive position

The Bureau initiated the standard and labeling program from ___ A. 2006 C. 2009 B. 2008. D. 2010

Description : The Bureau initiated the standard and labeling program from ___ A. 2006 C. 2009 B. 2008. D. 2010

Last Answer : 2006

The Hawthorne studies: (a) Found that to increase worker efficiency, management must analyze and minimize the motions required to complete a task. (b) Found that when workers know they are being watched, their productivity increases. (c) Found that a worker is inherently lazy and will use any excuse not to perform their duties. (d) Found that workers accept a managerial directive only if it is acceptable in terms of their personal interests.

Description : The Hawthorne studies: (a) Found that to increase worker efficiency, management must analyze and minimize the motions required to complete a task. (b) Found that when workers know they are ... that workers accept a managerial directive only if it is acceptable in terms of their personal interests.

Last Answer : (b) Found that when workers know they are being watched, their productivity increases. 

Choose the correct statement about BEE Star rating label a. Higher the number of stars, greater will be the efficiency b. Lesser the number of stars, greater will be the efficiency c. Higher the number of stars, lesser will be the efficiency d. None of the above

Description : Choose the correct statement about BEE Star rating label a. Higher the number of stars, greater will be the efficiency b. Lesser the number of stars, greater will be the efficiency c. Higher the number of stars, lesser will be the efficiency d. None of the above

Last Answer : Higher the number of stars, greater will be the efficiency

While solving an assignment problem, an activity is assigned to a resource through a square with zero opportunity cost because the objective is to a. Minimize total cost of assignment b. Reduce the cost of assignment to zero c. Reduce the cost of that particular assignment to zero d. All of the above

Description : While solving an assignment problem, an activity is assigned to a resource through a square with zero opportunity cost because the objective is to a. Minimize total cost of assignment b. Reduce the cost of ... to zero c. Reduce the cost of that particular assignment to zero d. All of the above

Last Answer : c. Reduce the cost of that particular assignment to zero

In a manufacturing plant, following data are gathered for a given month: Production - 1200 pieces; specific energy consumption - 1000 kWh/piece; variable energy consumption - 950 kWh/piece. The fixed energy consumption of the plant for the month Paper 1 –Set A with Solutions _______________________ Bureau of Energy Efficiency 6 is ------- a) 6,000 kWh b)10,000 kWh c) 12,000 kWh d) 60,000 kWh

Description : In a manufacturing plant, following data are gathered for a given month: Production - 1200 pieces; specific energy consumption - 1000 kWh/piece; variable energy consumption - 950 kWh/piece. The fixed energy consumption of the plant ... ----- a) 6,000 kWh b)10,000 kWh c) 12,000 kWh d) 60,000 kWh

Last Answer : d) 60,000 kWh

State the objective of testing. Explain the role of BIS (Bureau of Indian Standards) in testing of electrical machines.

Description : State the objective of testing. Explain the role of BIS (Bureau of Indian Standards) in testing of electrical machines. 

Last Answer : 1. Objective of testing is to finding error/defects in machine/equipment/ product. 2. To confirm whether the results obtain during testing are within tolerance limits specified by BIS / ISS 3. To ... BIS/ISS specified standards. 5. To avoid in convinces & accidents BIS plays important role.  

are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc

Description : are the labelling of cutter bar. a) Shoe, ledger plate, wearing plate, knife, knife section, etc. b) Star wheel, engine, cage wheel, etc. c) both A & B d) Conveyor belt, cutter bar, rivers, etc

Last Answer : Shoe, ledger plate, wearing plate, knife, knife section, etc.

On which Following products is labelling not Voluntary a) Colour TV c) Ceiling fans b) Ballast d) Induction motors

Description : On which Following products is labelling not Voluntary a) Colour TV c) Ceiling fans b) Ballast d) Induction motors

Last Answer : Colour TV

Which of the following products on which labelling is not mandatory a) Frost free c) LPG stoves b) AC d) Laptops

Description : Which of the following products on which labelling is not mandatory a) Frost free c) LPG stoves b) AC d) Laptops

Last Answer : LPG stoves 

Product of which labelling is voluntary .... v. Frost Free Refrigerator.C) Colour TV D) Distribution TransformeR vi. Ceiling Fans

Description : Product of which labelling is voluntary .... v. Frost Free Refrigerator.C) Colour TV D) Distribution TransformeR vi. Ceiling Fans

Last Answer : CEILING FANS

Product on which labelling is mandatory..... iii. Electric Geysers. B) LPG Stoves iv. Ballast. D) Colour TV

Description : Product on which labelling is mandatory..... iii. Electric Geysers. B) LPG Stoves iv. Ballast. D) Colour TV

Last Answer : COLOUR TV

State whether the Diesel Engine Driven Monoset Pumps for agricultural purposes have been notified under the voluntary labelling. A. True. B. False.

Description : State whether the Diesel Engine Driven Monoset Pumps for agricultural purposes have been notified under the voluntary labelling. A. True. B. False.

Last Answer : true

State whether the given product have been notified under the mandatory labelling as on May 2018. ( Inverter type Room A/c). A. True. B. False.

Description : State whether the given product have been notified under the mandatory labelling as on May 2018. ( Inverter type Room A/c). A. True. B. False.

Last Answer : false

The manufacturer are officially required to put this label as per the standards and labelling program introduce in…………… A) 2004. C) 2005 B) 2006. D) 2007

Description : The manufacturer are officially required to put this label as per the standards and labelling program introduce in…………… A) 2004. C) 2005 B) 2006. D) 2007

Last Answer : 2006

Labelling on the induction motor is voluntary A. True B. False

Description : Labelling on the induction motor is voluntary A. True B. False

Last Answer : true

The Objective of Energy Management includes a. Minimising Energy Costs b. Minimising Environmental Degradation c. Minimissing waste d. All of the above

Description : The Objective of Energy Management includes a. Minimising Energy Costs b. Minimising Environmental Degradation c. Minimissing waste d. All of the above

Last Answer :  All of the above

29. The objective of energy management includes a) Minimising energy costs b) Minimising waste c) Minimising environmental degradation d) All the above

Description : The objective of energy management includes a) Minimising energy costs b) Minimising waste c) Minimising environmental degradation d) All the above

Last Answer :  All the above

17. The objective of energy management includes a) Minimising energy costs b) Minimising waste c) Minimising environmental degradation d) All the above

Description : The objective of energy management includes a) Minimising energy costs b) Minimising waste c) Minimising environmental degradation d) All the above

Last Answer : all of the above

128. The objective of energy management includes g) Minimising energy costs c) Minimising environmental degradation h) Minimising waste d) all the above

Description : The objective of energy management includes g)Minimising energy costs c) Minimising environmental degradation h)Minimising waste d) all the above

Last Answer : all the above

113. The objective of energy management includes c) Minimising energy costs c) Minimising environmental degradation d) Minimising waste d) all the above

Description : 113. The objective of energy management includes c) Minimising energy costs c) Minimising environmental degradation d) Minimising waste d) all the above

Last Answer : all the above

is the identification of energy consumption level, which is desirable as a management objective to work towards energy conservation a) Recording b) Targeting c) Analysing d) Monitoring

Description : is the identification of energy consumption level, which is desirable as a management objective to work towards energy conservation a) Recording b) Targeting c) Analysing d) Monitoring

Last Answer : Targeting

_________ has been formulated by Bureau of energy efficient A) star labeling program. B) computer program C) ranking program. D) None of the above.

Description : . _________ has been formulated by Bureau of energy efficient A) star labeling program. B) computer program C) ranking program. D) None of the above.

Last Answer : star labeling program

Which one is not the main objective of Fiscal Policy in India? A. To increase liquidity in economy B. To promote price stability C. To minimize the inequalities of income and wealth D. To promote employment opportunities

Description : Which one is not the main objective of Fiscal Policy in India? A. To increase liquidity in economy B. To promote price stability C. To minimize the inequalities of income and wealth D. To promote employment opportunities

Last Answer : A. To increase liquidity in economy

In market-penetration pricing, the company’s objective is to ________, believing that higher sales volume will lead to lower unit costs and higher long-run profits. A. Block competitive launches B. Maximize their market share C. Minimize their market share D. Maximize volume E. None of the above

Description : In market-penetration pricing, the company's objective is to ________, believing that higher sales volume will lead to lower unit costs and higher long-run profits. A. Block competitive launches B. ... their market share C. Minimize their market share D. Maximize volume E. None of the above

Last Answer : B. Maximize their market share

The full form of MEPS A) Minimum energy protection standards C) minimum energy policies standard B) Minimum energy performance standards D) minimum efficiency performance standards

Description : The full form of MEPS A) Minimum energy protection standards C) minimum energy policies standard B) Minimum energy performance standards D) minimum efficiency performance standards

Last Answer : Minimum energy performance standards

is the key to a systematic approach for decision making in the area of energy management. a) Energy Audit c) Energy management b) Efficiency d) None of the above

Description : is the key to a systematic approach for decision making in the area of energy management. a) Energy Audit c) Energy management b) Efficiency d) None of the above

Last Answer : Energy Audit

__________ mainly give consumers the necessary information to make informed purchase. A) Energy management C) label B) Standards D) energy efficiency

Description : . __________ mainly give consumers the necessary information to make informed purchase. A) Energy management C) label B) Standards D) energy efficiency

Last Answer : label

The form of implementing the new energy efficiency technologies, new materials and new manufacturing process is ____________ A. Energy management C. Energy savings B. Energy audit D. All of the above

Description : The form of implementing the new energy efficiency technologies, new materials and new manufacturing process is ____________ A. Energy management C. Energy savings B. Energy audit D. All of the above

Last Answer : Energy management

What Does A Hvac Engineer Do?

Description : What Does A Hvac Engineer Do?

Last Answer : An HVAC engineer's job duties can include the design, installation, maintenance, and repair of heating, ventilation, air conditioning, cooling, and refrigeration systems.

What Is The Hvac System?

Description : What Is The Hvac System?

Last Answer : While the Energy Center usually tries to avoid the use of acronyms, HVAC is in common use in the heating and cooling industry. It stands for "heating, ventilation and air conditioning," three functions often combined into one system in today's modern homes and buildings.

HVAC stands for __________. A) heating, ventilation, air conditioning B) height, velocity ,area C) all of the above. D) None of the above.

Description : . HVAC stands for __________. A) heating, ventilation, air conditioning B) height, velocity ,area C) all of the above. D) None of the above.

Last Answer : heating, ventilation, air conditioning

To maximize the combustion efficiency, which of the following in the flue gas needs to be done? a) maximize O2 b) maximize CO2 c) minimize CO2 d) maximize CO

Description : To maximize the combustion efficiency, which of the following in the flue gas needs to be done? a) maximize O2 b) maximize CO2 c) minimize CO2 d) maximize CO

Last Answer : b) maximize CO2

Bureau of Indian standards has specified that the total grain loss should not be more than 5% in which broken grain should be less than 2%. a. 3% b. 2.5% d. None of above

Description : Bureau of Indian standards has specified that the total grain loss should not be more than 5% in which broken grain should be less than 2%. a. 3% b. 2.5% d. None of above

Last Answer : Ans-      c. 2%.

9. Salient feature of Energy Conservation Act 2001 is (a) establishment of BEE (b) to prescribe energy conservation building codes for all buildings (c) to specify energy consumption (d) both (b) & (c)

Description : Salient feature of Energy Conservation Act 2001 is (a) establishment of BEE (b) to prescribe energy conservation building codes for all buildings (c) to specify energy consumption (d) both (b) & (c)

Last Answer : establishment of BEE 

Hyperbolic cooling towers have become design standard for all natural draft structural towers because usage of . a. Their structural strength b. Minimum usage of material. c. Improving cooling efficiency d. All of the above.

Description : Hyperbolic cooling towers have become design standard for all natural draft structural towers because usage of . a. Their structural strength b. Minimum usage of material. c. Improving cooling efficiency d. All of the above.

Last Answer : All of the above.

What is the overall objective of internal auditing? a. To attest to the efficiency with which resources are used. b. Ascertain that the cost of internal control is justified. c. To ascertain that financial statements present accurately the financial positionoperating results, and changes in cashand stockholders' equity.d. To help members of theorganization to effectivelydischarge their responsibilities.

Description : What is the overall objective of internal auditing? a. To attest to the efficiency with which resources are used. b. Ascertain that the cost of internal control is justified. c. To ... and stockholders' equity. d. To help members of the organization to effectively discharge their responsibilities.

Last Answer : To help members of the organization to effectively discharge their responsibilities.