What are the advantages of motorised valve actuators?

What are the advantages of motorised valve actuators?  
by

1 Answer

Answer :

Advantages

a. Can be used to operate in remote areas, high heat areas etc.

b. Suitable logics can be wired up easily.

c. Hammer blow mechanism (which will release valve in stuck open or close). The motor has high torque. 
by

Related questions

What are the four basic parts of any valve actuators?

Description : What are the four basic parts of any valve actuators?

Last Answer : a. Valve motor. b. Gear mechanism. c. Limit switch and torque switch assembly. d. Terminal box. 

Explain the working of valve actuators used in control valve.

Description : Explain the working of valve actuators used in control valve.

Last Answer : Working of spring diaphragm actuator: Actuator is the portion of the valve that responds to the applied signal and results in the movement of the stem due to which the flow rate of fluid changes. ... input signal. The diaphragm is made of neoprene or any other synthetic elastic element.

What are the advantages of hydraulic actuators?

Description : What are the advantages of hydraulic actuators?

Last Answer : [1] These are cheapest form of actuators. [2] Components are readily available. [3] Compressed air is available in factories. [4] Compressed air can be stored, and [5] Conveyed easily over ... Systems are compact. [13] Control is simple. Mechanical stops. [14] Components are easy to connect.

What are actuators? Explain Mechanical and Hydraulic actuators type with advantages and disadvantages.

Description : What are actuators? Explain Mechanical and Hydraulic actuators type with advantages and disadvantages.

Last Answer : Actuators:- An actuator is a component of a machine that is responsible for moving or controlling a mechanism or system. Mechanical Actuator:- A mechanical actuator functions to ... the control of the system due to the transmission lines and oil viscosity changes from temperature

List the different actuators. Explain any two types of actuators with advantages and disadvantages

Description : List the different actuators. Explain any two types of actuators with advantages and disadvantages

Last Answer : Actuators [1] Hydraulic Actuator [2] Electrical Actuator [3] Pneumatic Actuator [4] Mechanical Actuator Hydraulic Actuator According to Pascal, when there is an increase in ... efficiency Disadvantages [1] Requires more power [2] Possibilities of fire hazards / accidents

Valve Regulated Lead Acid (VRLA) Batteries Advantages

Description : Valve Regulated Lead Acid (VRLA) Batteries Advantages

Last Answer : Valve Regulated Lead Acid (VRLA) Batteries are popularly termed as maintenance free lead acid batteries. Each cell in VRLA battery will have a value (automating operating) to allow the gas ... same voltage of the cells, to continue in using existing charging equipment VRLA batteries are economical

What are the advantages of butterfly valve?

Description : What are the advantages of butterfly valve?

Last Answer : a. Less holdup. b. No support needed. c. Any actuator can be used. d. Quick opening and closing. e. Less space required. f. Used for low-pressure low temperature and large pipelines. 

Can Arduino be used with actuators?

Description : Can Arduino be used with actuators?

Last Answer : Yes, Arduino can be used with a wide variety of actuators, such as motors, servos, solenoids, or LEDs, by using motor drivers, relay modules, or other actuator control circuits, or by connecting actuators directly to Arduino pins.

What is actuators?

Description : What is actuators?

Last Answer : An actuator is a device which actuates something else -especially a mechanism which causes a device to be switched on oroff.

What is actuators?

Description : What is actuators?

Last Answer : An actuator is a device which actuates something else -especially a mechanism which causes a device to be switched on oroff.

What is used to initiate the perception in the environment? a) Sensor b) Read c) Actuators d) None of the mentioned

Description : What is used to initiate the perception in the environment? a) Sensor b) Read c) Actuators d) None of the mentioned

Last Answer : a) Sensor

Which is used to provide the feedback to the learning element? a) Critic b) Actuators c) Sensor d) None of the mentioned

Description : Which is used to provide the feedback to the learning element? a) Critic b) Actuators c) Sensor d) None of the mentioned

Last Answer : a) Critic

Where does the performance measure is included? a) Rational agent b) Task environment c) Actuators d) Sensor

Description : Where does the performance measure is included? a) Rational agent b) Task environment c) Actuators d) Sensor

Last Answer : b) Task environment

Which technology uses miniaturized accelerometers and gyroscopes? a) Sensors b) Actuators c) MEMS d) None of the mentioned

Description : Which technology uses miniaturized accelerometers and gyroscopes? a) Sensors b) Actuators c) MEMS d) None of the mentioned

Last Answer : c) MEMS

Which were built in such a way that humans had to supply the inputs and interpret the outputs? a) Agents b) AI system c) Sensor d) Actuators

Description : Which were built in such a way that humans had to supply the inputs and interpret the outputs? a) Agents b) AI system c) Sensor d) Actuators

Last Answer : b) AI system

The Task Environment of an agent consists of ____________ a) Sensors b) Actuators c) Performance Measures d) All of the mentioned

Description : The Task Environment of an agent consists of ____________ a) Sensors b) Actuators c) Performance Measures d) All of the mentioned

Last Answer : d) All of the mentioned

Agents behavior can be best described by ____________ a) Perception sequence b) Agent function c) Sensors and Actuators d) Environment in which agent is performing

Description : Agents behavior can be best described by ____________ a) Perception sequence b) Agent function c) Sensors and Actuators d) Environment in which agent is performing

Last Answer : b) Agent function

Which instruments are used for perceiving and acting upon the environment? a) Sensors and Actuators b) Sensors c) Perceiver d) None of the mentioned

Description : Which instruments are used for perceiving and acting upon the environment? a) Sensors and Actuators b) Sensors c) Perceiver d) None of the mentioned

Last Answer : a) Sensors and Actuators

Which of the following is not true? A : For robotics, you should have a knowledge of different sensors B : For robotics, you must be able to write different planning algorithms C : For robotics, you may have to use actuators D : For robotics, you do not require help of computer engineers, mechanical

Description : Which of the following is not true? A : For robotics, you should have a knowledge of different sensors B : For robotics, you must be able to write different planning algorithms C : For robotics, you may have to use actuators D : For robotics, you do not require help of computer engineers, mechanical

Last Answer : D : For robotics, you do not require help of computer engineers, mechanical

Drives are also known as A : Sensor B : Controller C : Actuators D : Manipulator

Description : Drives are also known as A : Sensor B : Controller C : Actuators D : Manipulator

Last Answer : C : Actuators

Drives are also known asA : Actuators B : Controller C : Sensors D : Manipulator

Description : Drives are also known asA : Actuators B : Controller C : Sensors D : Manipulator

Last Answer : A : Actuators

Which of the following is not true? A : For robotics, you should have a knowledge of different sensors B : For robotics, you must be able to write different planning algorithms C : For robotics, you may have to use actuators D : For robotics, you do not require help of computer engineers, mechanical

Description : Which of the following is not true? A : For robotics, you should have a knowledge of different sensors B : For robotics, you must be able to write different planning algorithms C : For robotics, you may have to use actuators D : For robotics, you do not require help of computer engineers, mechanical

Last Answer : D : For robotics, you do not require help of computer engineers, mechanical

An example for electromagnetic wave propagation is a) refrigerator b) electric fan c) mobile transponder d) relays in actuators

Description : An example for electromagnetic wave propagation is a) refrigerator b) electric fan c) mobile transponder d) relays in actuators

Last Answer : c) mobile transponder

Drives are also known as (A) Actuators (B) Controller (C) Sensors (D) Manipulator

Description : Drives are also known as (A) Actuators (B) Controller (C) Sensors (D) Manipulator

Last Answer : A

5-Match the following Robot part Function a. Manipulator arm 1. For holding a piece or tool b. Controllers 2. Move the manipulator arm and end effector c. Drives 3. Number of degrees of freedom of movementd. Gripper 4. Delivers commands to the actuators (A) a-1, b-4, c-2, d-3 (B) a-3, b-4, c-2, d-1 (C) a-3, b-2, c-4, d-1 (D) a-4, b-3, c-2, d-1

Description : 5-Match the following Robot part Function a. Manipulator arm 1. For holding a piece or tool b. Controllers 2. Move the manipulator arm and end effector c. Drives 3. Number of degrees of freedom of movement d. Gripper 4. Delivers commands to the ... -1 (C) a-3, b-2, c-4, d-1 (D) a-4, b-3, c-2, d-1

Last Answer : B

Linear actuators are used in________ A. Machine tools B. Industrial machinery C.both A and B D.None

Description : Linear actuators are used in________ A. Machine tools B. Industrial machinery C.both A and B D.None 

Last Answer : A. Machine tools 

Devices that transforms electrical signals into physical movements A. Sensors B. Actuators C. Switches D. Display

Description : Devices that transforms electrical signals into physical movements A. Sensors B. Actuators C. Switches D. Display

Last Answer : B. Actuators 

Write the functions of actuators

Description : Write the functions of actuators

Last Answer : 1. An actuator is a component of an engine that is responsible for moving or controlling parts of an engine. 2. An actuator requires a control signal and a source of energy. The control ... movement by converting one kind of motion, such as rotary motion, into another kind, such as linear motion

List the actuators used in MPFI system and working of any one.

Description : List the actuators used in MPFI system and working of any one. 

Last Answer : Actuators of MPFI 1.Fuel Injector 2. Idle speed control valve. 3. Inlet metering valve. 4. Vacuum solenoid valve 5. Cam actuators. Fuel Injector-In MPFI system, Top feed fuel ... fuel between the Pintle and discharge opening to form a fine spray pattern that has a cone shape.  

Prepare maintenance schedule of various actuators used in large wind power plants.

Description : Prepare maintenance schedule of various actuators used in large wind power plants. 

Last Answer : Maintenance Schedule of Various Actuators: Maintenance of Yaw System Actuator: The maintenance of Yaw system actuator is done quarterly or yearly. Following maintenance activities are to be ... , then send alarming signal. 7.Monitor change in temperature, pressure and mechanical stresses. 

What are ‘Linear actuators’ ? State applications.

Description : What are ‘Linear actuators’ ? State applications.

Last Answer : What are ‘Linear actuators’ ? State applications.

As the ahead valve opens as shown in the illustration, pin #5 of the Sensor ______________. EL-0099 A. becomes more negative B. becomes more positive C. approaches neutral point D. approaches ground potential

Description : As the ahead valve opens as shown in the illustration, pin #5 of the Sensor ______________. EL-0099 A. becomes more negative B. becomes more positive C. approaches neutral point D. approaches ground potential

Last Answer : Answer: B

In the illustration, the tan and white wires are connected to the solenoid valve. The solinoid valve is_________. EL-0043 A. in the liquid line before the TXV B. energized and open whenever the unit is plugged in C. not grounded so the unit must be modified before using aboard ship D. the water inlet for the ice maker

Description : In the illustration, the tan and white wires are connected to the solenoid valve. The solinoid valve is_________. EL-0043 A. in the liquid line before the TXV B. energized and open whenever the unit ... so the unit must be modified before using aboard ship D. the water inlet for the ice maker

Last Answer : Answer: D

What is the value of the capacitor in the astern valve position circuit shown in the illustration? EL-0099 A. 100 kFarad B. 0.5 microfarad C. 0.5 millifarad D. 50 kFarad

Description : What is the value of the capacitor in the astern valve position circuit shown in the illustration? EL-0099 A. 100 kFarad B. 0.5 microfarad C. 0.5 millifarad D. 50 kFarad

Last Answer : Answer: B

In the illustration, the tan and white wires are connected to the solenoid valve. The solenoid valve is_________. EL-0042 A. in the liquid line before the TXV B. energized and open whenever the unit is plugged in C. not grounded so the unit must be modified before using aboard ship D. the water inlet for the ice maker

Description : In the illustration, the tan and white wires are connected to the solenoid valve. The solenoid valve is_________. EL-0042 A. in the liquid line before the TXV B. energized and open whenever the unit ... so the unit must be modified before using aboard ship D. the water inlet for the ice maker

Last Answer : Answer: D

Peripheral components for the operation of the astern valve position amplifier circuit shown in the illustration are _____________. EL-0099 A. resistors B. operated on +28 volts D.C. C. located on a separate circuit card D. all of the above

Description : Peripheral components for the operation of the astern valve position amplifier circuit shown in the illustration are _____________. EL-0099 A. resistors B. operated on +28 volts D.C. C. located on a separate circuit card D. all of the above

Last Answer : Answer: C

Pin #8 of the astern valve position sensor shown in the illustration is connected _______________. EL-0099 A. to analog common B. in series with PCOM C. to (-) 50 volts D.C. D. to (+) 50 volts D.C.

Description : Pin #8 of the astern valve position sensor shown in the illustration is connected _______________. EL-0099 A. to analog common B. in series with PCOM C. to (-) 50 volts D.C. D. to (+) 50 volts D.C.

Last Answer : Answer: A

Pin #6 of the ahead valve position sensor as shown in the illustration is connected _______________. EL-0099 A. to (-) 50 volts D.C. B. in parallel with PCOM C. to (+) 50 volts D.C. D. to analog common

Description : Pin #6 of the ahead valve position sensor as shown in the illustration is connected _______________. EL-0099 A. to (-) 50 volts D.C. B. in parallel with PCOM C. to (+) 50 volts D.C. D. to analog common

Last Answer : Answer: C

As shown in the illustration, when the 'speed control' system is in 'SPLIT' _______________. EL-0096 A. Relays #1, #5 and #8 are not used B. the 'slew rated controller' is grounded through Relay #6 C. the RPM 'function generator' and 'thrust levers' have no control D. the 'E/P converters' are bypassed and air is fed directly to the governors via the 'load sharing valve'

Description : As shown in the illustration, when the 'speed control' system is in 'SPLIT' _______________. EL-0096 A. Relays #1, #5 and #8 are not used B. the 'slew rated controller' is grounded through Relay ... E/P converters' are bypassed and air is fed directly to the governors via the 'load sharing valve'

Last Answer : Answer: C

The function of a rectifier is similar to that of a _______. A. trap B. regulating valve C. check valve D. filter

Description : The function of a rectifier is similar to that of a _______. A. trap B. regulating valve C. check valve D. filter

Last Answer : Answer: C

On an engine throttle control system, the auxiliary control circuits are provided with devices to prevent excessive overtravel of the pilot valve by the synchronous motor. These devices are called _________________. A. overlap sensors B. limit switches C. overtravel relays D. proximity switches

Description : On an engine throttle control system, the auxiliary control circuits are provided with devices to prevent excessive overtravel of the pilot valve by the synchronous motor. These devices are called _________________. A. overlap sensors B. limit switches C. overtravel relays D. proximity switches

Last Answer : Answer: B

What is interlocks provided for the valve MCC

Description : What is interlocks provided for the valve MCC 

Last Answer : a) Mechanical interlock, which will not allow the other contactor to close if one contactor, is closed. b) 42 auxiliary contacts are wired in the control ckt. 42-1 contact in 42-2 and 42-2 contact in 42-1. 

Name the functions of the valve?

Description : Name the functions of the valve? 

Last Answer : a. ON and OFF service. b. Throttling or regulating liquid flow. c. Avoid back flow. d. Regulating pressure. e. Relieving pressure. 

How will you proceed to operate the valve manually after an electrical operation?

Description : How will you proceed to operate the valve manually after an electrical operation?  

Last Answer : After electrical operation to operate manually we must tilt the lever provided on the actuator to hand (manual) position by which the sliding clutch gets engaged with hand drive. 

Explain the operational aspects of limit switch and torque switch in rotork valve actuator.

Description : Explain the operational aspects of limit switch and torque switch in rotork valve actuator. 

Last Answer : a. When limit function is selected?  b. When torque function is selected?  Limit function - when limit function is selected in rotork valve, the limit switches will operate when the limit set ... . The limit switches will not act (only torque switch will act when selected to torque function). 

Explain how the motor motion is transmitted to the valve stem?

Description : Explain how the motor motion is transmitted to the valve stem?  

Last Answer : The motor shaft is connected to a spar gear. It engages on a worm wheel. The worm wheel has dog teeth. This dog teeth engages or hits the dig teeth on moving or sliding clutch. The ... are on the splines of valve stem. So when the sliding clutch rotates the valve also rotates simultaneously.