What are the difference between primary cell and secondary cell?

What are the difference between primary cell and secondary cell?
by

1 Answer

Answer :

Primary cell: The electrolyte in primary cell is chemically irreversible. That is once the cell is discharged it cannot be recharged. It should be replaced with a new cell. The cells can supply only low currents and have low efficiency. They supply intermittent current. Their internal resistance is more. These cells are comparatively cheap.

Secondary cell: These cells are chemically reversible. They can be discharged and charged. They can supply large currents because their internal resistance is less. These have high efficiency compare to primary cells. These can supply constant current. These are comparatively costly.  
by

Related questions

What is primary cell and secondary cell?

Description : What is primary cell and secondary cell?

Last Answer : Answer: Battery which can be discharged only once is called primary cell ex: Manganese Zinc and alkaline Secondary cells are the battery which can be charged and discharged for a number of times ex: Lead acid and Nickel cadmium

What are the advantages of secondary cells over primary cell?

Description : What are the advantages of secondary cells over primary cell?

Last Answer : a. It gives high current capacity. b. Its internal resistance is very low. c. It gives a constant current. d. It posses very high efficiency. e. It posses fairly constant emf. f. It posses good ... large storage capacity. h. It can be renewed by charging after it is discharge. i. It is durable.

What are the differences between primary cell and secondary cell?

Description : What are the differences between primary cell and secondary cell?

Last Answer : Primary cells are those cells, which cannot be re-charged after the substances (electrolyte, electrode and container) used in it becomes useless. The common primary cells in use are, a. Simple voltaic cell ( ... are, a. Lead acid cell. b. Nickel iron alkaline cell. c. Nickel cadmium alkaline cell.

Which of the following statements identifies the difference between the primary windings and the secondary windings of a 2:1 stepdown transformer? A. The secondary windings have twice as much resistance as the primary windings. B. The secondary windings give off twice as much heat as the primary windings. C. The secondary windings require half as much current as the primary windings. D. The secondary windings have half as many turns as the primary windings.

Description : Which of the following statements identifies the difference between the primary windings and the secondary windings of a 2:1 stepdown transformer? A. The secondary windings have twice as much resistance ... primary windings. D. The secondary windings have half as many turns as the primary windings.

Last Answer : Answer: D

In a three phase transformer, if the primary side is connected in star and secondary side is connected in delta, what is the angle difference between phase voltage in the two cases. (A) delta side lags by -30°. (B) star side lags by -30°. (C) delta side leads by 30°. (D) star side leads by -30°.

Description : In a three phase transformer, if the primary side is connected in star and secondary side is connected in delta, what is the angle difference between phase voltage in the two cases. (A) delta side lags by -30°. (B) star side lags by -30°. (C) delta side leads by 30°. (D) star side leads by -30°.

Last Answer : Ans: C This is vector group and has +30° displacement. Therefore, delta side leads by +30°.

In a transformer, with closed magnetic coupling between primary and secondary __ will improve: a) Efficiency b) All day efficiency c) Regulation d) None of the above

Description : In a transformer, with closed magnetic coupling between primary and secondary __ will improve: a) Efficiency b) All day efficiency c) Regulation d) None of the above

Last Answer : Ans: C

A load with an impedance of 440 ohms is connected across the secondary of the transformer illustrated. If the input voltage is 110 VAC and the step-up ratio is 10 to 1, what will be the primary current? EL-0055 A. 2.5 amps B. 25 amps C. 250 amps D. current cannot be determined with information given

Description : A load with an impedance of 440 ohms is connected across the secondary of the transformer illustrated. If the input voltage is 110 VAC and the step-up ratio is 10 to 1, what will be the primary current? EL-0055 A. 2.5 amps B. 25 amps C. 250 amps D. current cannot be determined with information given

Last Answer : Answer: B

A load is connected to the secondary of the transformer illustrated and the current through the load is 10 amps. If the step-up ratio is 10 to 1 and the input voltage is 110 VAC, what will be the current flow through the primary? EL-0055 A. 1 amp B. 10 amps C. 100 amps D. 1000 amps

Description : A load is connected to the secondary of the transformer illustrated and the current through the load is 10 amps. If the step-up ratio is 10 to 1 and the input voltage is 110 VAC, what will be the current flow through the primary? EL-0055 A. 1 amp B. 10 amps C. 100 amps D. 1000 amps

Last Answer : Answer: C

Which of the following statements is true concerning stepdown transformer operation? A. The inductance on the primary side is the same as the inductance on the secondary side. B. The voltage to the primary side is the same as the voltage from the secondary side. C. The current to the primary side is the same as the current from the secondary side. D. The voltage to the primary side is greater than the voltage from the secondary side.

Description : Which of the following statements is true concerning stepdown transformer operation? A. The inductance on the primary side is the same as the inductance on the secondary side. B. The voltage to the primary ... . D. The voltage to the primary side is greater than the voltage from the secondary side.

Last Answer : Answer: D

If the illustrated device has a step-up ratio of 10 to 1 what voltage be measured at the secondary shortly after the primary of the device is connected to 110 volts DC with a current of 12 amps? EL-0055 A. 0 volts B. 110 volts C. 1000 volts D. 1100 volts

Description : If the illustrated device has a step-up ratio of 10 to 1 what voltage be measured at the secondary shortly after the primary of the device is connected to 110 volts DC with a current of 12 amps? EL-0055 A. 0 volts B. 110 volts C. 1000 volts D. 1100 volts

Last Answer : Answer: A

When a low input voltage is imparted to a device which then delivers a high output voltage, the device is known as a _____________. A. primary transformer B. secondary transformer C. stepdown transformer D. stepup transformer

Description : When a low input voltage is imparted to a device which then delivers a high output voltage, the device is known as a _____________. A. primary transformer B. secondary transformer C. stepdown transformer D. stepup transformer

Last Answer : Answer: D

Common nickel-cadmium and nickel-iron storage batteries utilize _______________. A. acid primary cells B. alkaline primary cells C. acid secondary cells D. alkaline secondary cells

Description : Common nickel-cadmium and nickel-iron storage batteries utilize _______________. A. acid primary cells B. alkaline primary cells C. acid secondary cells D. alkaline secondary cells

Last Answer : Answer: D

Relative to the secondary winding of a step-up transformer, the primary winding will have _____________. A. more turns B. fewer turns C. half as many turns D. twice as many turns

Description : Relative to the secondary winding of a step-up transformer, the primary winding will have _____________. A. more turns B. fewer turns C. half as many turns D. twice as many turns

Last Answer : Answer: B

When a transformer is used to step down voltage, the low voltage winding is _____________. A. part of the core B. the primary coil C. not insulated D. the secondary coil

Description : When a transformer is used to step down voltage, the low voltage winding is _____________. A. part of the core B. the primary coil C. not insulated D. the secondary coil

Last Answer : Answer: D

If a transformer is connected to a DC source, the transformer will overload at the ____________. A. contacts B. primary coil C. secondary coil D. core

Description : If a transformer is connected to a DC source, the transformer will overload at the ____________. A. contacts B. primary coil C. secondary coil D. core

Last Answer : Answer: B

Increasing the load to the secondary windings of a transformer will cause a/an ____________. A. decrease in the primary voltage B. increase in the primary voltage C. decrease in the primary current D. increase in the primary current

Description : Increasing the load to the secondary windings of a transformer will cause a/an ____________. A. decrease in the primary voltage B. increase in the primary voltage C. decrease in the primary current D. increase in the primary current

Last Answer : Answer: D

In the illustration, if the device in figure 'A' has a step-up ratio of 10 to 1, what voltage should be measured at the secondary shortly after the primary of the device is connected to 110 volts DC? EL-0059 A. 0 volts B. 110 volts C. 11 volts D. 1100 volts

Description : In the illustration, if the device in figure 'A' has a step-up ratio of 10 to 1, what voltage should be measured at the secondary shortly after the primary of the device is connected to 110 volts DC? EL-0059 A. 0 volts B. 110 volts C. 11 volts D. 1100 volts

Last Answer : Answer: A

A load with an impedance of 440 ohms is connected across the secondary of the device illustrated. If the input voltage is 110 VAC and the step-up ratio is 10 to 1, what will be the primary current? EL-0055 A. 2.5 amps B. 25 amps C. 250 amps D. current cannot be determined with information given

Description : A load with an impedance of 440 ohms is connected across the secondary of the device illustrated. If the input voltage is 110 VAC and the step-up ratio is 10 to 1, what will be the primary current? EL-0055 A. 2.5 amps B. 25 amps C. 250 amps D. current cannot be determined with information given

Last Answer : Answer: B

A load is connected to the secondary of the device illustrated and the current through the load is 10 amps. If the step-up ratio is 10 to 1 and the input voltage is 110 VAC, what will be the current flow through the primary? EL-0055 A. 1 amp B. 10 amps C. 100 amps D. 1000 amps

Description : A load is connected to the secondary of the device illustrated and the current through the load is 10 amps. If the step-up ratio is 10 to 1 and the input voltage is 110 VAC, what will be the current flow through the primary? EL-0055 A. 1 amp B. 10 amps C. 100 amps D. 1000 amps

Last Answer : Answer: C

If we give 2334 A, 540V on Primary side of 1.125 MVA step up transformer, then what will be the Secondary Current, If Secondary Voltage=11 KV?

Description : If we give 2334 A, 540V on Primary side of 1.125 MVA step up transformer, then what will be the Secondary Current, If Secondary Voltage=11 KV?

Last Answer : A. As we know the Voltage & current relation for transformer-V1/V2 = I2/I1 We Know, VI= 540 V; V2=11KV or 11000 V; I1= 2334 Amps. By putting these value on Relation540/11000= I2/2334 So,I2 = 114.5 Amps

What current flows in the transformer primary when its secondary is open?

Description : What current flows in the transformer primary when its secondary is open?

Last Answer : A. When the secondary is open, there is no current in the secondary of the transformer. The primary takes a small current I0) from the source called no-load current which has a magnetizing ... ) producing the magnetic flux and a working component (I0 cosθ0) supplying real power for iron losses.

In a Tap changing transformer on which side is the tap connected, primary side or secondary side?

Description : In a Tap changing transformer on which side is the tap connected, primary side or secondary side?

Last Answer : A. Tapings are always connected to high voltage winding side, because of low current. If we connect tapings to low voltage side, sparks will produce while tap changing operation due to high current.

Why to calculate equivalent impedance referred to primary or secondary side?

Description : Why to calculate equivalent impedance referred to primary or secondary side?

Last Answer : Equivalent impedance is essential to be calculated because the electrical power transformer is an electric power system equipment, for estimating different parameters of electric power system ... referred to primary or equivalent circuit of transformer referred to secondary sides respectively.

If we give 2334 A, 540V on Primary side of 1.125 MVA step up transformer, then what will be the Secondary Current, If Secondary Voltage=11 KV?

Description : If we give 2334 A, 540V on Primary side of 1.125 MVA step up transformer, then what will be the Secondary Current, If Secondary Voltage=11 KV?

Last Answer :  As we know the Voltage & current relation for transformer-V1/V2 = I2/I1 We Know, VI= 540 V; V2=11KV or 11000 V; I1= 2334 Amps. By putting these value on Relation540/11000= I2/2334 So,I2 = 114.5 Amps

A 1:5 step-up transformer has 120V across the primary and 600 ohms resistance across the secondary. Assuming 100% efficiency, the primary current equals (A) 0.2 Amp. (B) 5 Amps. (C) 10 Amps. (D) 20 Amps.

Description : A 1:5 step-up transformer has 120V across the primary and 600 ohms resistance across the secondary. Assuming 100% efficiency, the primary current equals (A) 0.2 Amp. (B) 5 Amps. (C) 10 Amps. (D) 20 Amps.

Last Answer : I1= V1 /R1 = 120/600 = 0.2 (η = 100%, losses are zero ∴V1 = VR = I1R1)

The primary winding of a 220/6 V, 50 Hz transformer is energised from 110 V, 60 Hz supply. The secondary output voltage will be (A) 3.6 V. (B) 2.5 V. (C) 3.0 V. (D) 6.0 V.

Description : The primary winding of a 220/6 V, 50 Hz transformer is energised from 110 V, 60 Hz supply. The secondary output voltage will be (A) 3.6 V. (B) 2.5 V. (C) 3.0 V. (D) 6.0 V.

Last Answer : (C) 3.0 V.

The outer most layer of cell wall is (A) Primary wall (B) Secondary wall (C) Middle lamella (D) Plasma membrane

Description : The outer most layer of cell wall is (A) Primary wall (B) Secondary wall (C) Middle lamella (D) Plasma membrane

Last Answer : (C) Middle lamella

The immune system normally discriminates between which types of antigens. a) B and T cells b) self and non-self c) humoral and cell-mediated d) primary and secondary

Description : The immune system normally discriminates between which types of antigens. a) B and T cells b) self and non-self c) humoral and cell-mediated d) primary and secondary

Last Answer : ANSWER: B -- SELF AND NON-SELF

Distinguish between primary cell and secondary cell.

Description : Distinguish between primary cell and secondary cell.

Last Answer : Distinguish between primary cell and secondary cell.

What is the difference between primary and secondary succession?

Description : What is the difference between primary and secondary succession?

Last Answer : A: Primary succession occurs in an area where no soil or organisms are present, while secondary succession occurs in an area that has previously been inhabited by organisms but has been disturbed or damaged.

What is the difference between a primary and a secondary immune response?

Description : What is the difference between a primary and a secondary immune response?

Last Answer : A: A primary immune response occurs when the immune system is exposed to a pathogen for the first time, while a secondary immune response occurs when the immune system is exposed to a pathogen it has encountered before.

What's the difference between primary and secondary emotions?

Description : What's the difference between primary and secondary emotions?

Last Answer : Interesting question, made me stop for a bit and think. I’d guess it’s because something happened, and you responded by getting angry. There was a trigger, and then there was the anger. But then what would love be? Or any of the other feelings?

Women's/Gender Studies people - what's the difference between primary and secondary sources?

Description : Women's/Gender Studies people - what's the difference between primary and secondary sources?

Last Answer : answer:Here is a link that might provide some guidance . In my historical work on gender studies, I treated my own interviews as primary studies. Hypothesis based on the author's interviews in a ... source. So a particular work, you can reference the same author as both primary and secondary.

the most important difference between primary and secondary groups has to do with: -General Knowledge

Description : the most important difference between primary and secondary groups has to do with: -General Knowledge

Last Answer : b. the kinds of relationships that exist within them.

Difference between primary and secondary sewage treatment? -Biology

Description : Difference between primary and secondary sewage treatment? -Biology

Last Answer : answer:

Difference between primary and secondary meristems? -Biology

Description : Difference between primary and secondary meristems? -Biology

Last Answer : answer:

What is the difference between primary ecological succession and secondary ecological succession ?

Description : What is the difference between primary ecological succession and secondary ecological succession ?

Last Answer : Primary ecological succession is the changing sequence of communities from the first biological occupation of a place where previously there were no living beings. For example, the colonization and the following ... from the invasion of plants and animals are in an abandoned crop or land.

If a secondary coil has 40 turns, and, a primary coil with 20 turns is charged with 50 V of potential difference, then the potential difference in the secondary coil would be A. 50 V in secondary coil B. 25 V in secondary coil C. 60 V in secondary coil D. 100 V in secondary coil

Description :  If a secondary coil has 40 turns, and, a primary coil with 20 turns is charged with 50 V of potential difference, then the potential difference in the secondary coil would be A. 50 V in secondary coil B. 25 V in secondary coil C. 60 V in secondary coil D. 100 V in secondary coil

Last Answer : 100 V in secondary coil

In paralytic squint, the difference between primary and secondary deviation in the gaze of direction of the paralytic muscle: a. Increases b. Decreases c. Remains the same

Description : In paralytic squint, the difference between primary and secondary deviation in the gaze of direction of the paralytic muscle: a. Increases b. Decreases c. Remains the same  

Last Answer : ANSWER: A  

The emf of a primary cell depends upon the: a) Physical dimension of the cell b) Nature of the electrolyte c) Nature of the electrode d) Both (b) and (c)

Description : The emf of a primary cell depends upon the: a) Physical dimension of the cell b) Nature of the electrolyte c) Nature of the electrode d) Both (b) and (c)

Last Answer : Ans: D

6. Do you think the classification of economic activities into primary, secondary and tertiary is useful? Explain how. -Economics 10th

Description : 6. Do you think the classification of economic activities into primary, secondary and tertiary is useful? Explain how. -Economics 10th

Last Answer : The classification of economic activities into primary, secondary and tertiary is useful, as it helps to classify the different occupations that are taken up by the people in the country and how much ... the GDP and which sector has the scope to employ more people and increase the National Income.

Distinguish between primary, secondary and tertiary sector. -SST 10th

Description : Distinguish between primary, secondary and tertiary sector. -SST 10th

Last Answer : Primary Sector (i) It is known as agriculture and allied services sector. (ii) This sector produce goods and services by exploiting natural resources. (iii) This sector is unorganised and use ... communication come in this sector. (v) This sector s sharing in the employment is increasing.

What is meant by a primary consumer, secondary consumer and a tertiary consumer ? -SST 10th

Description : What is meant by a primary consumer, secondary consumer and a tertiary consumer ? -SST 10th

Last Answer : Primary consumer-Primary consumers are living organisms that only eat plants i.e. producers. Herbivores/plant eaters are primary consumers. For example-Goat, Rabbit. Secondary consumer-Secondary ... consumers are large carnivores which feed on small carnivores. For example Owl, lion, etc.

Do you think the classification of economic activities into primary, secondary and tertiary is useful ? -SST 10th

Description : Do you think the classification of economic activities into primary, secondary and tertiary is useful ? -SST 10th

Last Answer : 'Yes in my opinion the classification of economic activities into primary, secondary and tertiary sectors is very useful because classification will help us in identifying which activity ... smoothly and for best administration and development, classification of economic activities is necessary.

Explain the primary, secondary and tertiary sectors by giving examples of each. -SST 10th

Description : Explain the primary, secondary and tertiary sectors by giving examples of each. -SST 10th

Last Answer : Primary Sector :- All those economic activities that are undertaken by directly using natural resources are included in primary sector. For example, mining, forestry, fishing, poultry etc. Secondary sector : ... to the market. That will be done by tertiary sector. It is also called service sector.

Distinguish between primary sector and secondary sector by stating four points of distinction. -SST 10th

Description : Distinguish between primary sector and secondary sector by stating four points of distinction. -SST 10th

Last Answer : Distinguish between primary sector and secondary sector

Development of the primary and secondary sector ? -SST 10th

Description : Development of the primary and secondary sector ? -SST 10th

Last Answer : Tertiary sector.

Which sector helps in the development of the primary and secondary sector ? -SST 10th

Description : Which sector helps in the development of the primary and secondary sector ? -SST 10th

Last Answer : Service /Tertiary sector.

“When a country develops, the contribution of primary sector declines and that of secondary and tertiary sector increases.” -SST 10th

Description : “When a country develops, the contribution of primary sector declines and that of secondary and tertiary sector increases.” -SST 10th

Last Answer : (i) In the initial stages of development, the primary sector was the most important sector of economic activity. As the methods of farming changed and agriculture sector began to prosper, ... in terms of total production and employment. This is the general pattern observed in developed countries.

6. Name the primary and secondary lymphoid organs. -Science

Description : 6. Name the primary and secondary lymphoid organs. -Science

Last Answer : Primary lymphoid organs – Bone marrow and thymils. Secondary lymhoid organs – Spleen, lymph nodes, tonsils.