What are the routines checks on slip rings?

What are the routines checks on slip rings?
by

1 Answer

Answer :

a. Correct mV drops brush to be used.

b. Brush tension adjustment.

c. Air cleaning to reduce leakage current.

d. Brush bedding before use.

e. Field polarity change every 6 months. 
by

Related questions

The main purpose of an electric space heater installed in a large AC generator is to _____________. A. keep the lube oil warm for quick starting B. prevent moisture from condensing in the windings when the machine is shutdown C. prevent the windings from becoming brittle D. prevent acidic pitting of the slip rings

Description : The main purpose of an electric space heater installed in a large AC generator is to _____________. A. keep the lube oil warm for quick starting B. prevent moisture from condensing in the ... is shutdown C. prevent the windings from becoming brittle D. prevent acidic pitting of the slip rings

Last Answer : Answer: B

An AC generator operating in parallel loses its excitation without tripping the circuit breaker. This will __________. A. not affect the faulty generator due to the compensation of the other generators B. cause the slip rings to melt C. cause a low voltage differential to develop between the armature and the bus D. cause high currents to be induced in the field windings

Description : An AC generator operating in parallel loses its excitation without tripping the circuit breaker. This will __________. A. not affect the faulty generator due to the compensation of the other generators B. ... between the armature and the bus D. cause high currents to be induced in the field windings

Last Answer : Answer: D

An alternator will fail to produce line voltage as a result of _____________. A. a closed circuit breaker B. oxidized slip rings C. improperly staggered brushes D. exciter generator failure

Description : An alternator will fail to produce line voltage as a result of _____________. A. a closed circuit breaker B. oxidized slip rings C. improperly staggered brushes D. exciter generator failure

Last Answer : Answer: D

Which of the following materials is recommended for finishing the slip rings after grinding or turning? A. grade 00 sandpaper B. canvas wiper C. crocus cloth D. smooth file

Description : Which of the following materials is recommended for finishing the slip rings after grinding or turning? A. grade 00 sandpaper B. canvas wiper C. crocus cloth D. smooth file

Last Answer : Answer: C

A three-phase, squirrel cage, induction motor will run hot due to _____________. A. open stator coils B. high power factor C. dirty or corroded slip rings D. reversed commutating poles

Description : A three-phase, squirrel cage, induction motor will run hot due to _____________. A. open stator coils B. high power factor C. dirty or corroded slip rings D. reversed commutating poles

Last Answer : Answer: A

Which of the following statements represents the FIRST step in seating new brushes on slip rings? A. Wrap sandpaper around the slip rings and slide it back and forth between the brushes and the slip rings. B. Press the brushes against the slip ring with a wood block. C. Increase brush pressure and run at no load for 3 to 4 hours. D. Apply seating compound under the brushes and run at no load for 2 hours.

Description : Which of the following statements represents the FIRST step in seating new brushes on slip rings? A. Wrap sandpaper around the slip rings and slide it back and forth between the brushes and the slip rings. B. ... to 4 hours. D. Apply seating compound under the brushes and run at no load for 2 hours.

Last Answer : Answer: A

To properly seat the brushes on slip rings, you should use ____________. A. sand paper B. crocus cloth C. emery cloth D. all of the above

Description : To properly seat the brushes on slip rings, you should use ____________. A. sand paper B. crocus cloth C. emery cloth D. all of the above

Last Answer : Answer: A

The reversal of an AC, three-phase, induction motor is accomplished by ______________. A. changing all three motor leads B. reversing the position of the slip rings C. interchanging any two of the three motor leads D. interchanging any two brushes

Description : The reversal of an AC, three-phase, induction motor is accomplished by ______________. A. changing all three motor leads B. reversing the position of the slip rings C. interchanging any two of the three motor leads D. interchanging any two brushes

Last Answer : Answer: C

Routine maintenance of a ship's service alternator should include ______________. A. changing the pedestal bearing insulation yearly B. megger testing of all rectifying diodes C. lubricating excitation slip rings D. periodic cleaning of the air filters or screens

Description : Routine maintenance of a ship's service alternator should include ______________. A. changing the pedestal bearing insulation yearly B. megger testing of all rectifying diodes C. lubricating excitation slip rings D. periodic cleaning of the air filters or screens

Last Answer : Answer: D

The main purpose of an electric space heater installed in a large AC generator is to _____________. A. prevent the windings from becoming brittle B. prevent moisture from condensing in the windings during shutdown C. prevent acidic pitting of the slip rings D. keep the lube oil warm for quick starting

Description : The main purpose of an electric space heater installed in a large AC generator is to _____________. A. prevent the windings from becoming brittle B. prevent moisture from condensing in the windings during ... C. prevent acidic pitting of the slip rings D. keep the lube oil warm for quick starting

Last Answer : Answer: B

Erratic operation of the devices represented in the diagrams shown in the illustration could be traced to ____________. EL-0092 A. improper contact at 'R' slip rings or 'S' connections B. a low three-phase voltage supply C. improper contact at 'S' slip rings or 'R' connections D. a high three-phase voltage supply

Description : Erratic operation of the devices represented in the diagrams shown in the illustration could be traced to ____________. EL-0092 A. improper contact at 'R' slip rings or 'S' connections B. a low three- ... . improper contact at 'S' slip rings or 'R' connections D. a high three-phase voltage supply

Last Answer : Answer: A

In actual applications, electrical connections to 'R1-R2' of figure 'A' and to 'R1-R2- R3' of figure 'B' shown in the illustration are made by ______________. EL-0092 A. soldered contacts B. spliced and taped connections C. slip rings and brushes D. solderless crimp-on connectors

Description : In actual applications, electrical connections to 'R1-R2' of figure 'A' and to 'R1-R2- R3' of figure 'B' shown in the illustration are made by ______________. EL-0092 A. soldered contacts B. spliced and taped connections C. slip rings and brushes D. solderless crimp-on connectors

Last Answer : Answer: C

A generator has been exposed to water and is being checked for its safe operation. Therefore, it is necessary to _______________. A. check for shorted coils with a growler B. take moisture readings with a hydrometer C. test insulation values with a megger D. ground the commutator, or slip rings and run it at half load for 12 hours

Description : A generator has been exposed to water and is being checked for its safe operation. Therefore, it is necessary to _______________. A. check for shorted coils with a growler B. take moisture readings with a ... a megger D. ground the commutator, or slip rings and run it at half load for 12 hours

Last Answer : Answer: C

Which of the following statements is true concerning all three-phase alternators? A. Each has three separate but identical armature windings acted on by one system of rotating magnets. B. Each has one armature winding acted on by three identical but separate systems of rotating magnets. C. All three-phase alternators are designed to operate with a 0.8 leading power factor. D. The three phases always provide power to the load through three sets of slip rings and brushes.

Description : Which of the following statements is true concerning all three-phase alternators? A. Each has three separate but identical armature windings acted on by one system of rotating magnets. B. Each has one ... The three phases always provide power to the load through three sets of slip rings and brushes.

Last Answer : Answer: A

In an AC generator, direct current from a separate source is passed through the windings of the rotor _____________. A. by means of slip rings and brushes B. by means of a commutator C. by means of rotating bar magnet D. to minimize the danger of arc over

Description : In an AC generator, direct current from a separate source is passed through the windings of the rotor _____________. A. by means of slip rings and brushes B. by means of a commutator C. by means of rotating bar magnet D. to minimize the danger of arc over

Last Answer : Answer: A

Voltage generated by most AC generators is fed from the machine to the bus by means of ____________. A. brushes on a commutator B. brushes on slip rings C. slip rings on a commutator D. direct connections from the stator

Description : Voltage generated by most AC generators is fed from the machine to the bus by means of ____________. A. brushes on a commutator B. brushes on slip rings C. slip rings on a commutator D. direct connections from the stator

Last Answer : Answer: D

In an induction motor, rotor currents are circulated in the rotor by _____________. A. slip rings and brushes B. an armature and brushes C. inductive reaction of the rotating stator field D. external variable resistors

Description : In an induction motor, rotor currents are circulated in the rotor by _____________. A. slip rings and brushes B. an armature and brushes C. inductive reaction of the rotating stator field D. external variable resistors

Last Answer : Answer: C

Which of the following physical characteristics does a wound-rotor induction motor possess that a squirrel cage motor does not? A. Slip rings B. End rings C. A centrifugal switch D. End plates

Description : Which of the following physical characteristics does a wound-rotor induction motor possess that a squirrel cage motor does not? A. Slip rings B. End rings C. A centrifugal switch D. End plates

Last Answer : Answer: A

While starting a main propulsion synchronous motor, the ammeter pegs out at maximum and then returns to the proper value after synchronization. This indicates the _____________. A. motor has started properly B. field windings are grounded C. slip rings are dirty D. power transmission cables are grounded

Description : While starting a main propulsion synchronous motor, the ammeter pegs out at maximum and then returns to the proper value after synchronization. This indicates the _____________. A. motor has started ... field windings are grounded C. slip rings are dirty D. power transmission cables are grounded

Last Answer : Answer: A

Brushless generators are designed to operate without the use of ___________. A. brushes B. slip rings C. commutators D. all of the above

Description : Brushless generators are designed to operate without the use of ___________. A. brushes B. slip rings C. commutators D. all of the above

Last Answer : Answer: D

What are the materials used to manufacture the brushes for slip rings of an induction motor?

Description : What are the materials used to manufacture the brushes for slip rings of an induction motor?

Last Answer : A:The slip rings are made of brass and phosphor bronze. The brushes are made of metal graphite which is an alloy of copper and carbon.

What are slip rings?

Description : What are slip rings?

Last Answer : The slip rings are made of copper alloys and are fixed around the shaft insulating it. Through these slip rings and brushes the rotor winding can be connected to external circuits.

The current from the stator of an alternator is taken out to the external load circuit through (A) slip rings. (B) commutator segments. (C) solid connections. (D) carbon brushes.

Description : The current from the stator of an alternator is taken out to the external load circuit through (A) slip rings. (B) commutator segments. (C) solid connections. (D) carbon brushes.

Last Answer : (C) solid connections.

Give reason: Split rings are used instead of slip rings to construct DC dynamo

Description : Give reason: Split rings are used instead of slip rings to construct DC dynamo

Last Answer : Split rings make the current to flow in the same direction in the external circuit in both cycles.

What is the purpose of the slip rings?

Description : What is the purpose of the slip rings?

Last Answer : To conduct the currents induced in the armature to an external load.

In D.C. generators, current to the external circuit from armature is given through (a) commutator (b) solid connection (c) slip rings (d) none of above

Description : In D.C. generators, current to the external circuit from armature is given through (a) commutator (b) solid connection (c) slip rings (d) none of above

Last Answer : Ans: a

Which of the following are the parts of a DC generator that convert the AC in the armature to DC in the external circuit. Are these parts the: w) field poles x) slip rings and the brushes y) commutator and the brushes z) armature and the core

Description : Which of the following are the parts of a DC generator that convert the AC in the armature to DC in the external circuit. Are these parts the: w) field poles x) slip rings and the brushes y) commutator and the brushes z) armature and the core

Last Answer : ANSWER: Y -- COMMUTATOR AND THE BRUSHES

State the function of following parts in Induction motor. (i) Stator (ii) Slip rings

Description : State the function of following parts in Induction motor. (i) Stator (ii) Slip rings

Last Answer : Name of part Function Stator 1) Stator frame supports the core, terminal box and protects the inner parts. 2) Stator core houses stator winding. 3) Stator winding ... ) Provides facility to connect external resistance to rotor circuit through brushes for starting and control.

The stator of a 415V, 50 Hz, 4-pole slip ring Induction Motor is excited by rated frequency with slip rings open

Description : The stator of a 415V, 50 Hz, 4-pole slip ring Induction Motor is excited by rated frequency with slip rings open circuited. The rotor is made to rotate at a speed of 600 rpm in the opposite direction to the ... frequency of induced voltage across slip ring is A) 30 Hz B) 70 Hz C) 20 Hz D) 35 Hz

Last Answer : The stator of a 415V, 50 Hz, 4-pole slip ring Induction Motor is excited by rated frequency with slip rings open circuited. The rotor is made to rotate at a speed of 600 rpm in the opposite direction to the normal direction, The frequency of induced voltage across slip ring is 70 Hz

Slip-rings in a synchronous motor carry?

Last Answer : Slip-rings in a synchronous motor carry direct current.

When your SO is gone for a day or two, overnight, are their any daily/nightly routines that change?

Description : When your SO is gone for a day or two, overnight, are their any daily/nightly routines that change?

Last Answer : I spread out in the middle of the bed and hog the covers like nobody’s business ;)

Where can I find free exercise routines?

Description : Where can I find free exercise routines?

Last Answer : Look for the videos on Sparkpeople.com. They have a personal trainer who demonstrates a number of aerobic and anaerobic exercises you can do at home or at your desk. You can also start interval training; the only things needed for that are good workout shoes and a park to train in.

Are genes 100% responsible for hereditary health problems or are common habits and routines responsible as well?

Description : Are genes 100% responsible for hereditary health problems or are common habits and routines responsible as well?

Last Answer : I think it's a combination of both. For example, teeth, there is a hereditary component to your susceptibility to cavities it doesn't mean it will happen if your parents don't have good ... compared to their adoptive parents situation I wonder if there are any studies like that Good question!

Why do you think the bluegrass musicians ultimately eliminated the slapstick comedy routines?

Description : Why do you think the bluegrass musicians ultimately eliminated the slapstick comedy routines?

Last Answer : Jejejr

What is the name given to a set of programs routines and procedures that are used to operate the computer hardware?

Description : What is the name given to a set of programs routines and procedures that are used to operate the computer hardware?

Last Answer : What is the answer ?

What were poor Victorian's daily routines?

Description : What were poor Victorian's daily routines?

Last Answer : they had to go to school or they went to work to sweepchimnys

What were poor Victorian's daily routines?

Description : What were poor Victorian's daily routines?

Last Answer : they had to go to school or they went to work to sweepchimnys

Who has really good swim routines do you know of?

Description : Who has really good swim routines do you know of?

Last Answer : Well I don't know how to swim, but this article should help you find what you need: http://www.usms.org/fitness/content/startingaroutine Good luck and remember to stay out of the pool for thirty minutes after eating.

Can I find ab workout routines online?

Description : Can I find ab workout routines online?

Last Answer : The answer to your question would be to go sixpackfactory.com. They have multiple workouts that hit the abs really well, and can help you get the abs you want.

Where can I find home workout routines?

Description : Where can I find home workout routines?

Last Answer : Self.com has great workout routines that can be done at one's home without any fancy workout equipment. They use either common household items (such as chairs) or simply one's own body weight.

What are the best gym workout routines to get a quick workout?

Description : What are the best gym workout routines to get a quick workout?

Last Answer : Gym workout routines are readily available online. Since you are interested in a quick gym workout, see the following: ww.fitnessmagazine.com/workout/tips/quick.../best-workout-tips/

Standing Abdominal Exercise Routines?

Description : Standing Abdominal Exercise Routines?

Last Answer : Standing Abdominal Exercise RoutinesFor most people, an ultimate fitness goal is to get into good shape and develop a strong abdomen and defined abs muscles. Unfortunately, most people will find that ... just need to life your knees to your chest, without using any weights for resistance purposes.

5 Easy Workout Routines For Beginners?

Description : 5 Easy Workout Routines For Beginners?

Last Answer : Finding a good workout routine can be a daunting task for an uninitiated newcomer. With so much information widely available in print and online, the fitness newcomer is often overwhelmed about trying to ... fun! The more you switch up your exercise routines, the more engaged you can keep yourself.

What are some good weight training routines?

Description : What are some good weight training routines?

Last Answer : You may be interested in the 3 Day Split Routine. You spread working out our three main body areas over these 3 days. So one day you will work out your chest and biceps, next day concentrate on your thighs, then last day focus on your abdominal.

Should step aerobics routines be changed periodically?

Description : Should step aerobics routines be changed periodically?

Last Answer : Aerobics routines should be changed periodically because doing the exact same routine strengthens only specific groups of muscles. That is why the exercise feels less strenuous, as the muscles that ... that you are exercising all of your muscles, you should switch your aerobics routine periodically.

What are some skin care care routines for oily, Indian skin?

Description : What are some skin care care routines for oily, Indian skin?

Last Answer : Answers is the place to go to get the answers you need and to ask the questions you want

_________is a copy of Basic Input/Output Operating System (BIOS) routines from Read Only Memory (ROM) into a special area of RAM so that they can be accessed more quickly. A. Dynamic RAM B. Shadow RAM C. Synchronous Graphics RAM D. Video RAM

Description : _________is a copy of Basic Input/Output Operating System (BIOS) routines from Read Only Memory (ROM) into a special area of RAM so that they can be accessed more quickly. A. Dynamic RAM B. Shadow RAM C. Synchronous Graphics RAM D. Video RAM

Last Answer : B. Shadow RAM

What are the built-in routines is available in forms 4.0 to create and manipulate a parameter list?

Description : What are the built-in routines is available in forms 4.0 to create and manipulate a parameter list?

Last Answer : Add_parameter Create_Parameter_list Delete_parameter Destroy_parameter_list Get_parameter_attr Get_parameter_list set_parameter_attr

List the built-in routines for the controlling canvas views during run-time?

Description : List the built-in routines for the controlling canvas views during run-time?

Last Answer : Find_canvas Get-Canvas_property Get_view_property Hide_View Replace_content_view Scroll_view Set_canvas_property Set_view_property Show_view Alert