What are the functions of arc chute?

What are the functions of arc chute? 
by

1 Answer

Answer :

To increase the speed of rise of arc by magnetic action.

It splits the arc by this arc resistance increases.

Diagnosing the arc by cooling. 


by

Related questions

The arc resulting from the tripping of a circuit breaker is prevented from damaging the contacts by _____________. A. designing the contacts to open slowly B. directing the arc into an arc chute C. an inverse timed thermal trip for short circuit currents D. instantaneous magnetic trip for overload currents

Description : The arc resulting from the tripping of a circuit breaker is prevented from damaging the contacts by _____________. A. designing the contacts to open slowly B. directing the arc into an ... an inverse timed thermal trip for short circuit currents D. instantaneous magnetic trip for overload currents

Last Answer : Answer: B

Why is my garbage chute so dang windy?

Description : Why is my garbage chute so dang windy?

Last Answer : The air pressures in your building are not being properly balanced, so that the pressure inside the building is lower than the outside pressures. Usually there are ventilation systems in large buildings like yours to prevent this. Here’s a very technical but very thorough explanation.

I am considering building a trash/laundry chute. What do I need to consider?

Description : I am considering building a trash/laundry chute. What do I need to consider?

Last Answer : You need enough space behind the wall (I assume that's where you're going to put it) to allow the laundry to drop freely. Optimally, it should drop near the washer downstairs. If you have kids, it needs to be ... . My grandmother had one when I was a kid, but I swear it wasn't me shoving the cat in!

How do you prefer to clean your poop chute?

Description : How do you prefer to clean your poop chute?

Last Answer : Nothing beats a shower

Pick out the correct statement. (A) Noise from ball mills can be dealt with by fibre glass lined enclosures (B) Noise from vibrating chutes can be reduced by lining the metallic chute with rubber (C) Noise of conveyor belt system is reduced by using urethane coated cloth conveyor belts and rubber/plastic covered metallic rollers (D) All (A), (B) & (C)

Description : Pick out the correct statement. (A) Noise from ball mills can be dealt with by fibre glass lined enclosures (B) Noise from vibrating chutes can be reduced by lining the metallic chute with rubber (C) Noise ... cloth conveyor belts and rubber/plastic covered metallic rollers (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

In a chute spillway, the flow is usually (A) Uniform (B) Subcritical (C) Critical (D) Super critical

Description : In a chute spillway, the flow is usually (A) Uniform (B) Subcritical (C) Critical (D) Super critical

Last Answer : Answer: Option D

Which of the following spillways is least suitable for an earthen dam? (A) Ogee spillway (B) Chute spillway (C) Side channel spillway (D) Shaft spillway

Description : Which of the following spillways is least suitable for an earthen dam? (A) Ogee spillway (B) Chute spillway (C) Side channel spillway (D) Shaft spillway

Last Answer : Answer: Option A

In case of non-availability of space due to topography, the most suitable spillway is (A) Straight drop spillway (B) Shaft spillway (C) Chute spillway (D) Ogee spillway

Description : In case of non-availability of space due to topography, the most suitable spillway is (A) Straight drop spillway (B) Shaft spillway (C) Chute spillway (D) Ogee spillway

Last Answer : Answer: Option B

The flow of water after spilling over the weir crest in chute spillway and side channel spillway respectively are (A) At right angle and parallel to weir crest (B) Parallel and at right angle to weir crest (C) Parallel to weir crest in both (D) At right angle to weir crest in both

Description : The flow of water after spilling over the weir crest in chute spillway and side channel spillway respectively are (A) At right angle and parallel to weir crest (B) Parallel and at right angle to weir crest (C) Parallel to weir crest in both (D) At right angle to weir crest in both

Last Answer : Answer: Option A

Crop factors which affecting thresher preformation. a) Variety of crop, Moisture in crop material b) Feeding chute angle, cylinder types c) Cylinder speed, feed rate d) Cylinder type, feed rate

Description : Crop factors which affecting thresher preformation. a) Variety of crop, Moisture in crop material b) Feeding chute angle, cylinder types c) Cylinder speed, feed rate d) Cylinder type, feed rate

Last Answer : Variety of crop, Moisture in crop material

Operational factors which affecting thresher preformation. a) Variety of crop, Moisture in crop material b) Feeding chute angle, cylinder type c) Cylinder speed, feed rate d) Cylinder type ,feed rate

Description : Operational factors which affecting thresher preformation. a) Variety of crop, Moisture in crop material b) Feeding chute angle, cylinder type c) Cylinder speed, feed rate d) Cylinder type ,feed rate

Last Answer : Cylinder speed, feed rate

Machine factors which affecting thresher preformation. a) Variety of crop, Moisture in crop material b) Feeding chute angle, cylinder type c) Cylinder speed, feed rate d) Cylinder type ,feed rate

Description : Machine factors which affecting thresher preformation. a) Variety of crop, Moisture in crop material b) Feeding chute angle, cylinder type c) Cylinder speed, feed rate d) Cylinder type ,feed rate

Last Answer : Feeding chute angle, cylinder type

In a group housing project, it is proposed to use pre-fabricated RCC beams and columns. The most useful construction equipment is (a) Derrick Crane (b) Chute (c) Weigh Batcher (d) Transit Mixer

Description : In a group housing project, it is proposed to use pre-fabricated RCC beams and columns. The most useful construction equipment is (a) Derrick Crane (b) Chute (c) Weigh Batcher (d) Transit Mixer

Last Answer : (a) Derrick Crane

In the illustration, the purpose of part B is to _________. EL-0033 A. increase resistance in series with the contacts as they close to prevent arcing B. create a magnetic field in the steel plates that interacts with the arc to cool and extinguish the arc C. cause the contacts to open in the event of an overload D. provide ventilation to the contact when the breaker is close to rated capacity

Description : In the illustration, the purpose of part B is to _________. EL-0033 A. increase resistance in series with the contacts as they close to prevent arcing B. create a magnetic field in the steel ... event of an overload D. provide ventilation to the contact when the breaker is close to rated capacity

Last Answer : Answer: B

Motor starter or controller contacts may become welded together if the contacts _____________. A. open too quickly and arc B. close under excessive pressure C. open or close too quickly D. close under excessive starting current

Description : Motor starter or controller contacts may become welded together if the contacts _____________. A. open too quickly and arc B. close under excessive pressure C. open or close too quickly D. close under excessive starting current

Last Answer : Answer: D

Excessive humming of AC contactors may be caused by ______________. A. burnt arc shields B. shorted armature coils C. a broken shading coil D. high voltage

Description : Excessive humming of AC contactors may be caused by ______________. A. burnt arc shields B. shorted armature coils C. a broken shading coil D. high voltage

Last Answer : Answer: C

Motor controller or starter contacts may become pitted and welded together if the contacts _____________. A. open under loaded conditions B. close slowly with light pressure C. open too quickly and arc D. close quickly with proportionate pressure

Description : Motor controller or starter contacts may become pitted and welded together if the contacts _____________. A. open under loaded conditions B. close slowly with light pressure C. open too quickly and arc D. close quickly with proportionate pressure

Last Answer : Answer: B

Excessive heat in an operating motor controller can result from _____________. A. a closed starter contact B. loose connections C. missing arc chutes D. low motor starting torque

Description : Excessive heat in an operating motor controller can result from _____________. A. a closed starter contact B. loose connections C. missing arc chutes D. low motor starting torque

Last Answer : Answer: B

In an AC generator, direct current from a separate source is passed through the windings of the rotor _____________. A. by means of slip rings and brushes B. by means of a commutator C. by means of rotating bar magnet D. to minimize the danger of arc over

Description : In an AC generator, direct current from a separate source is passed through the windings of the rotor _____________. A. by means of slip rings and brushes B. by means of a commutator C. by means of rotating bar magnet D. to minimize the danger of arc over

Last Answer : Answer: A

A molded-case circuit breaker provides protection against short circuits by using a/an ________________. A. electromagnet B. shading coil C. arc quencher D. burn away strip

Description : A molded-case circuit breaker provides protection against short circuits by using a/an ________________. A. electromagnet B. shading coil C. arc quencher D. burn away strip

Last Answer : Answer: A

A molded-case breaker provides protection against short circuits by using a/an ____________. A. shading coil B. arc quencher C. electromagnet D. holding coil

Description : A molded-case breaker provides protection against short circuits by using a/an ____________. A. shading coil B. arc quencher C. electromagnet D. holding coil

Last Answer : Answer: C

When does an arc extincts?

Description : When does an arc extincts?

Last Answer : If the rate of rise of re-striking voltage (RRRV) is less than rate of rise of dielectric strength between the breaker contacts arc will not sustain and extincts

What is arc suppression coil?

Description : What is arc suppression coil?

Last Answer : A method of reactance grounding used to suppress the arc due to arcing grounds.

What are the demerits of using oil as an arc quenching medium?

Description : What are the demerits of using oil as an arc quenching medium?

Last Answer : • The air has relatively inferior arc quenching properties • The air blast circuit breakers are very sensitive to variations in the rate of rise of restriking voltage • Maintenance is required for the compression plant which supplies the air blast

What are the hazards imposed by oil when it is used as an arc quenching medium?

Description : What are the hazards imposed by oil when it is used as an arc quenching medium?

Last Answer : There is a risk of fire since it is inflammable. It may form an explosive mixture with arc. So oil is preferred as an arc quenching medium.

What are the advantages of oil as arc quenching medium?

Description : What are the advantages of oil as arc quenching medium?

Last Answer : • It absorbs the arc energy to decompose the oil into gases, which have excellent cooling properties • It acts as an insulator and permits smaller clearance between line conductors and earthed components

Write the classification of circuit breakers based on the medium used for arc extinction?

Description : Write the classification of circuit breakers based on the medium used for arc extinction?

Last Answer : Air break circuit breaker Oil circuit breaker Minimum oil circuit breaker Air blast circuit breaker SF6 circuit breaker Vacuum circuit breaker

Give the two methods of arc interruption?

Description : Give the two methods of arc interruption?

Last Answer : High resistance interruption:-the arc resistance is increased by elongating, and splitting the arc so that the arc is fully extinguished Current zero method:-The arc is interrupted at current zero position that occurs100 times a second in case of 50Hz power system frequency in ac.

What is an arc?

Description : What is an arc?

Last Answer : Arc is a phenomenon occurring when the two contacts of a circuit breaker separate under heavy load or fault or short circuit condition.

How Arc quenching is done?

Description : How Arc quenching is done?

Last Answer : When fault occurs depending on design element melts at one point and arc starts and a transient current is super imposed on prospective current. When the sum of two is zeroing the arc is quenching. 

What is the type of arc extinction in switchgears?

Description : What is the type of arc extinction in switchgears?

Last Answer : 415V – resistance method (through arc splitter) 6.6kV – single puffer principle 

What is arc and what is spark?

Description : What is arc and what is spark?

Last Answer : Spark - the heat produced that ignites, due to the rubbing of two metals is called the spark. Arc - the electrical discharge between two electrodes is called the arc. Arc is the self-sustained ... between electrodes in a gas or vapour, which has a high voltage discharge at the cathode.  

How arc is quenched in Generator Field Breaker?

Description : How arc is quenched in Generator Field Breaker?

Last Answer : By magnetic blow out coils, arc is elongated very fastly, so resistance of arc increases, soon becoming unstable and quenched by arc chutes. 

Out of the following methods of heating the one which is independent of supply frequency is (A) electric arc heating (B) induction heating (C) electric resistance heating (D) dielectric heating

Description : Out of the following methods of heating the one which is independent of supply frequency is (A) electric arc heating (B) induction heating (C) electric resistance heating (D) dielectric heating

Last Answer : (C) electric resistance heating

Diesel generators #1 and #2 are operating in parallel at near full load capacity. Diesel generator #1 suddenly trips out mechanically due to low lube oil pressure. The reverse power relay functions properly and trips generator #1 electrically off the bo A. Start the emergency generator. B. Ascertain cause of the low lube oil pressure. C. Strip the board of all nonvital circuits. D. Secure alarms, reset reverse power relay, and restart #1 engine.

Description : Diesel generators #1 and #2 are operating in parallel at near full load capacity. Diesel generator #1 suddenly trips out mechanically due to low lube oil pressure. The reverse power relay functions ... all nonvital circuits. D. Secure alarms, reset reverse power relay, and restart #1 engine.

Last Answer : Answer: C

In a logic circuit the NOR and NAND gate functions ____________. A. must be accomplished with a common base transistor arrangement B. are available in diode form C. are exact opposites with the same NOR and NAND inputs D. have output conditions that are exact opposites to the output condition for OR and AND, respectively

Description : In a logic circuit the NOR and NAND gate functions ____________. A. must be accomplished with a common base transistor arrangement B. are available in diode form C. are exact opposites with the ... . have output conditions that are exact opposites to the output condition for OR and AND, respectively

Last Answer : Answer: D

The circuit shown in the illustration functions as a ____________. EL-0087 A. pulse trigger circuit for an operational amplifier B. three stage, high gain class 'A' amplifier C. binary ripple counter or shift register D. free running multivibrator

Description : The circuit shown in the illustration functions as a ____________. EL-0087 A. pulse trigger circuit for an operational amplifier B. three stage, high gain class 'A' amplifier C. binary ripple counter or shift register D. free running multivibrator

Last Answer : Answer: C

A triac thyristor functions as a control device and is basically ________________. A. two NPN transistors in parallel with a common base lead B. a diode in series with a temperature sensitive capacitor C. two back-to-back SCR's with a common gate lead D. a triode tube with an extra heavy grid element

Description : A triac thyristor functions as a control device and is basically ________________. A. two NPN transistors in parallel with a common base lead B. a diode in series with a temperature sensitive capacitor C. two ... -back SCR's with a common gate lead D. a triode tube with an extra heavy grid element

Last Answer : Answer: C

A shading coil used in an AC magnetic controller, functions to _____________. A. reduce vibration and noise in the contactor B. prevent flux buildup in the operating coil C. eliminate arcing when the contacts close D. energize the operating coil and 'pull in' the contacts

Description : A shading coil used in an AC magnetic controller, functions to _____________. A. reduce vibration and noise in the contactor B. prevent flux buildup in the operating coil C. eliminate arcing when the contacts close D. energize the operating coil and 'pull in' the contacts

Last Answer : Answer: A

What operational characteristics do the components labeled as 'S' and 'R' represent in the motor controller diagram shown in the illustration? EL-0080 A. Standard and Reverse directions B. Stop and Restart features C. Subnormal and Regular loading D. Start and Run functions

Description : What operational characteristics do the components labeled as 'S' and 'R' represent in the motor controller diagram shown in the illustration? EL-0080 A. Standard and Reverse directions B. Stop and Restart features C. Subnormal and Regular loading D. Start and Run functions

Last Answer : Answer: D

The full torque electric brake on an electric cargo winch functions to _____________. A. act as a backup brake in the event the mechanical brake should fail B. automatically hold the load as soon as current to the machine is shut off C. automatically govern the lowering speed of the load D. automatically govern the hoisting speed of the load

Description : The full torque electric brake on an electric cargo winch functions to _____________. A. act as a backup brake in the event the mechanical brake should fail B. automatically hold the load ... automatically govern the lowering speed of the load D. automatically govern the hoisting speed of the load

Last Answer : Answer: B

What are the functions of no-load current in a transformer ?

Description : What are the functions of no-load current in a transformer ?

Last Answer : No-load current produces flux and supplies iron loss and copper loss on no-load.

What are the functions of protective relays

Description : What are the functions of protective relays

Last Answer : To detect the fault and initiate the operation of the circuit breaker to isolate the defective element from the rest of the system, thereby protecting the system from damages consequent to the fault.

What are the functions of charger?

Description : What are the functions of charger? 

Last Answer : 1. For initial charging. 2. For float charging. 3. For battery equalizing charging. 4. For battery boost charging. 5. To supply normal DC loads. 

What are the sources of 240 V AC class I supply? What are the functions of each part of UPS?

Description : What are the sources of 240 V AC class I supply? What are the functions of each part of UPS? 

Last Answer : Six sources. Three 20 kVA UPS for safety related loads. Two 60 kVA UPS for non-safety related loads. One 60 kVA UPS as a standby to safety related loads. These all UPS are back up by ... UPS into service. Manual bypass To take main UPS to maintenance by putting stand by UPS into service. 

How fibrillation current functions?

Description : How fibrillation current functions? 

Last Answer : Fibrillation current is actually function of individual body weight. For 50 kgs body weight: fibrillation current (IB) = 0.116/ª ts (Limited to 0.03 - 3 sec. Range) Where ts = duration ... is kept more because to care for under grounding services. Example laying of power cables, drainage etc. 

Name the functions of the valve?

Description : Name the functions of the valve? 

Last Answer : a. ON and OFF service. b. Throttling or regulating liquid flow. c. Avoid back flow. d. Regulating pressure. e. Relieving pressure. 

What are the functions of a heat exchanger?

Description : What are the functions of a heat exchanger? 

Last Answer : The function of heat exchanger is to transfer heat efficiently and economically between two fluids. Heat is transferred from the fluid, which has higher temperature to the fluid, which has lower temperature. The ... flow in heat exchangers a. Parallel flow. b. Counter flow. c. Transverse flow.

What are the functions of dearator?

Description : What are the functions of dearator?

Last Answer : Dearator removes non-condensable gases (O2), which gets added in the steam and it, mixes steam with the condensed water for feed water heating. This is a contact type feed water heater.