What is the material of cap, pin, and insulator?

What is the material of cap, pin, and insulator?  
by

1 Answer

Answer :

Cap = galvanised cast iron

Pin = forged steel pin

Insulator = porcelain. 
by

Related questions

How cap and pin attached to insulator?

Description : How cap and pin attached to insulator? 

Last Answer : By cementing.  

Compare pin type and suspension insulators on given points: (i) Position of insulator on cross arm. (ii) Position of conductor on insulator. (iii) Reaction on cross arm. (iv) Possibility of flash over due to large birds (v) Maintenance/Replacement cost (vi) Maximum voltage level (vii) Effect on height of supporting structure. (viii) Life

Description : Compare pin type and suspension insulators on given points: (i) Position of insulator on cross arm. (ii) Position of conductor on insulator. (iii) Reaction on cross arm. (iv) Possibility of ... Replacement cost (vi) Maximum voltage level (vii) Effect on height of supporting structure. (viii) Life 

Last Answer : S.No  Points Pin Type insulator Suspension or Disc Type insulator 1 Position of insulator on cross arm It is fixed on top of cross arm by using galvanized steel pin. So it is ... so to maintain minimum ground clearance height of pole increase.  8 Life Less More

In a 3-insulator string voltage distribution system the ratio of capacitance between pin and earth to the self...

Description : In a 3-insulator string voltage distribution system the ratio of capacitance between pin and earth to the self capacitance of each unit is 1/4. If the potential across the top unit is 8 kV, then the string voltage is (A) 22.5 kV (B) 24 kV (C) 26 kV (D) 32.5 kV

Last Answer : In a 3-insulator string voltage distribution system the ratio of capacitance between pin and earth to the self capacitance of each unit is 1/4. If the potential across the top unit is 8 kV, then the string voltage is 32.5 kV

Jam nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut (C) A slot is cut in the middle of nut along the length and a cap screw is provided to tighten the two parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Description : Jam nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and ... parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Last Answer : (A) A smaller nut is tightened against main nut creating friction at the contacting surface

Castle nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut (C) A slot is cut in the middle of nut along the length and a cap screw is provided to tighten the two parts of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Description : Castle nut is a locking device in which (A) A smaller nut is tightened against main nut creating friction at the contacting surface (B) A split pin is passed through diametrically opposite slots in nut and ... of nut separated by slot (D) An elastic piece is tightened in the nut by a setscrew

Last Answer : (B) A split pin is passed through diametrically opposite slots in nut and a hole in bolt and the two ends of split pin are separated and bent back on nut

Write the functions of the following components of prismatic compass i) Prism, ii) Lifting pin, iii) Prism cap, iv) Agate cap

Description : Write the functions of the following components of prismatic compass i) Prism, ii) Lifting pin, iii) Prism cap, iv) Agate cap

Last Answer : i) Prism: Reading printed on horizontal face of compass ring can be read from vertical position  ii) Lifting pin: When the instrument not in use the sight vane passes against the lifting pin which lift ... piece of hard glass provided on top of pivoted point, to reduce wear and tear of the point

In the illustrated amplifier, the base of the transistor is what type of material? EL-0022 A. N type B. P type C. metal oxide insulator D. alloy junction material

Description : In the illustrated amplifier, the base of the transistor is what type of material? EL-0022 A. N type B. P type C. metal oxide insulator D. alloy junction material

Last Answer : Answer: A

A 'dielectric' is a/an ________________. A. electrical insulator B. current flow C. good conductor D. semiconductor material

Description : A 'dielectric' is a/an ________________. A. electrical insulator B. current flow C. good conductor D. semiconductor material

Last Answer : Answer: A

A semiconductor is a material with a _____________. A. conductivity higher than a normal conductor B. conductivity higher than a normal insulator C. high conductivity at low temperatures D. low conductivity at high temperatures

Description : A semiconductor is a material with a _____________. A. conductivity higher than a normal conductor B. conductivity higher than a normal insulator C. high conductivity at low temperatures D. low conductivity at high temperatures

Last Answer : Answer: B

Which of the following materials is a good insulator? A. steel B. aluminum C. glass D. copper

Description : Which of the following materials is a good insulator? A. steel B. aluminum C. glass D. copper

Last Answer : Answer: C

Which of the following materials is a good electrical insulator? A. wood B. silver C. copper D. gold

Description : Which of the following materials is a good electrical insulator? A. wood B. silver C. copper D. gold

Last Answer : Answer: A

What you mean by insulator? What are the qualities of good insulator?

Description : What you mean by insulator? What are the qualities of good insulator? 

Last Answer : A substance, which will not allow the flow of electric current to pass through it is called the insulator. The conductance and conductivity is zero in insulators. Insulators are used ... . That is resistance decreases with increasing temperature h. It should have high dielectric strength 

Practical method of improving string efficiency a) Increasing crass arms length b) Using different size of insulators c) Using different insulator materials d) Using of guard rings

Description : Practical method of improving string efficiency a) Increasing crass arms length b) Using different size of insulators c) Using different insulator materials d) Using of guard rings

Last Answer : Ans: Increasing crass arms length*

Which of the following procedures represents the best method to prevent the freezing of batteries continuously exposed to low temperatures? A. The battery caps should be removed. B. The battery cap vents should be sealed. C. The battery should be kept in a fully charged condition. D. The battery should be disconnected from its charging source.

Description : Which of the following procedures represents the best method to prevent the freezing of batteries continuously exposed to low temperatures? A. The battery caps should be removed. B. The battery cap ... in a fully charged condition. D. The battery should be disconnected from its charging source.

Last Answer : Answer: C

A slow continual loss of electrolyte level from one cell of a storage battery could be due to _______________. A. a cracked casing B. too low a charging rate C. the specific gravity being higher than normal D. one filler cap installed too tightly

Description : A slow continual loss of electrolyte level from one cell of a storage battery could be due to _______________. A. a cracked casing B. too low a charging rate C. the specific gravity being higher than normal D. one filler cap installed too tightly

Last Answer : Answer: A

What property makes a material a good insulator?

Description : What property makes a material a good insulator?

Last Answer : No shared electrons between neighboring atoms/molecules in the material makes for a good electric insulator.A good thermal insulator has lots of air or gas (which insulates) trapped in the material.

If the loss tangent is very less, then the material will be a a) Conductor b) Lossless dielectric c) Lossy dielectric d) Insulator

Description : If the loss tangent is very less, then the material will be a a) Conductor b) Lossless dielectric c) Lossy dielectric d) Insulator

Last Answer : b) Lossless dielectric

Which of the following properties distinguish a material as conductor, insulator and semiconductor? a) Free electron charges b) Fermi level after doping c) Energy band gap d) Electron density

Description : Which of the following properties distinguish a material as conductor, insulator and semiconductor? a) Free electron charges b) Fermi level after doping c) Energy band gap d) Electron density

Last Answer : c) Energy band gap

Ordinary glass is not a/an (A) Amorphous isotropic material (B) Supercooled liquid (C) Material with sharp definite melting point (D) Electrical insulator

Description : Ordinary glass is not a/an (A) Amorphous isotropic material (B) Supercooled liquid (C) Material with sharp definite melting point (D) Electrical insulator

Last Answer : (C) Material with sharp definite melting point

A pure semiconductor under ordinary conditions behaves like (A) a conductor. (B) an insulator. (C) a magnetic material. (D) a ferro-electric material.

Description : A pure semiconductor under ordinary conditions behaves like (A) a conductor. (B) an insulator. (C) a magnetic material. (D) a ferro-electric material.

Last Answer : (B) an insulator.

What material is a **** cap?

Description : Is it sheet metal or aluminum? I have about 10 kilos of them, so if I have to take it to the purchase of raw materials.

Last Answer : Sheet steel - if you mean the tops of the glasses ... ;-)

As the ahead valve opens as shown in the illustration, pin #5 of the Sensor ______________. EL-0099 A. becomes more negative B. becomes more positive C. approaches neutral point D. approaches ground potential

Description : As the ahead valve opens as shown in the illustration, pin #5 of the Sensor ______________. EL-0099 A. becomes more negative B. becomes more positive C. approaches neutral point D. approaches ground potential

Last Answer : Answer: B

Pin #8 of the astern valve position sensor shown in the illustration is connected _______________. EL-0099 A. to analog common B. in series with PCOM C. to (-) 50 volts D.C. D. to (+) 50 volts D.C.

Description : Pin #8 of the astern valve position sensor shown in the illustration is connected _______________. EL-0099 A. to analog common B. in series with PCOM C. to (-) 50 volts D.C. D. to (+) 50 volts D.C.

Last Answer : Answer: A

The signal to the circuit on card 'A0AA2' at coordinate '29Q' shown in the illustration is on the ____________. EL-0099 A. non-inverting input at pin '20' B. inverting input at pin '16' C. non-inverting input at pin '14' D. inverting input at pin '46'

Description : The signal to the circuit on card 'A0AA2' at coordinate '29Q' shown in the illustration is on the ____________. EL-0099 A. non-inverting input at pin '20' B. inverting input at pin '16' C. non-inverting input at pin '14' D. inverting input at pin '46'

Last Answer : Answer: B

For console circuit card 'LLEA' as shown in the illustration at coordinates '63R/S', the input(s) and output(s) are respectively on pin numbers ____________. EL-0100 A. '5' and '3' & '4' B. '2' & '3' and '5' & '6' C. '5' & '6' and '2' & '3' D. '3' & '4' and '5'

Description : For console circuit card 'LLEA' as shown in the illustration at coordinates '63R/S', the input(s) and output(s) are respectively on pin numbers ____________. EL-0100 A. '5' and '3' & '4' B. '2' & '3' and '5' & '6' C. '5' & '6' and '2' & '3' D. '3' & '4' and '5'

Last Answer : Answer: D

Pin #6 of the ahead valve position sensor as shown in the illustration is connected _______________. EL-0099 A. to (-) 50 volts D.C. B. in parallel with PCOM C. to (+) 50 volts D.C. D. to analog common

Description : Pin #6 of the ahead valve position sensor as shown in the illustration is connected _______________. EL-0099 A. to (-) 50 volts D.C. B. in parallel with PCOM C. to (+) 50 volts D.C. D. to analog common

Last Answer : Answer: C

In a faceplate-type motor starter, the starting arm is held in the 'OFF' position by a/an _____________. A. cotter pin B. magnet C. electrical circuit D. strong spring

Description : In a faceplate-type motor starter, the starting arm is held in the 'OFF' position by a/an _____________. A. cotter pin B. magnet C. electrical circuit D. strong spring

Last Answer : Answer: D

In three pin plug 6 Amp. 220v AC rating. why earth pin diameter is higher than ohter two pin? what its purpose ?

Description : In three pin plug 6 Amp. 220v AC rating. why earth pin diameter is higher than ohter two pin? what its purpose ?

Last Answer : Because Current flow in the conductor is inversely proportional to the conductor diameter. So if any short circuits occur in the system first high currents bypassed in the Earthling terminal.( R=Pl/a area of the conductor increases resistance value decreases)

Why in a three pin plug the earth pin is thicker and longer than the other pins?

Description : Why in a three pin plug the earth pin is thicker and longer than the other pins?

Last Answer : A:It depends upon R= ρl/a where area(a) is inversely proportional to resistance (R), so if AREA increases, RESISTANCE decreases & if RESISTANCE is less the leakage current will take low ... the connection and last to disconnnect. This assures Safety for the person who uses the electrical instrument.

In three pin plug why earth pin diameter is higher than other two pin?

Description : In three pin plug why earth pin diameter is higher than other two pin?

Last Answer : Because Current flow in the conductor is inversely proportional to the conductor diameter. So if any short circuits occur in the system first high currents bypassed in the Earthling terminal. (R=Pl/a area of the conductor increases resistance value decreases)

Why in a three pin plug the earth pin is thicker and longer than the other pins?

Description : Why in a three pin plug the earth pin is thicker and longer than the other pins?

Last Answer : It depends upon R=ρL/A where area (A) is inversely proportional to resistance (R), so if area (A) increases, R decreases & if R is less the leakage current will take low resistance ... last to disconnect should be earth Pin. This assures Safety for the person who uses the electrical instrument.

Columns of given length, cross-section and material have different values of buckling loads for different end conditions. The strongest column is one whose (A) One end is fixed and other end is hinged (B) Both ends are hinged or pin jointed (C) One end is fixed and the other end entirely free (D) Both the ends are fixed

Description : Columns of given length, cross-section and material have different values of buckling loads for different end conditions. The strongest column is one whose (A) One end is fixed and other end is hinged (B) Both ... (C) One end is fixed and the other end entirely free (D) Both the ends are fixed

Last Answer : (D) Both the ends are fixed

type of connecting rod which is pinned to the crankshaft with the help of a pin, which helps to transmit the cut material. a) Pitman b) Cutter bat c) Shoe d) Wearing plate

Description : type of connecting rod which is pinned to the crankshaft with the help of a pin, which helps to transmit the cut material. a) Pitman b) Cutter bat c) Shoe d) Wearing plate

Last Answer : Pitman 

Pin Restoration with which material has the best retention: A. Amalgam B. Gold inlay C. Composite D. Glass Ionomer

Description : Pin Restoration with which material has the best retention:  A. Amalgam  B. Gold inlay  C. Composite  D. Glass Ionomer 

Last Answer : C. Composite 

Columns of given length, cross-section and material have different values of buckling loads for different end conditions. The strongest column is one whose (a) One end is fixed and other end is hinged (b) Both ends are hinged or pin jointed (c) One end is fixed and the other end entirely free (d) Both the ends are fixed

Description : Columns of given length, cross-section and material have different values of buckling loads for different end conditions. The strongest column is one whose (a) One end is fixed and other end is hinged (b) ... (c) One end is fixed and the other end entirely free (d) Both the ends are fixed

Last Answer : (d) Both the ends are fixed

Why are Metals good conductor of heat than insulator? -General Knowledge

Description : Why are Metals good conductor of heat than insulator? -General Knowledge

Last Answer : The answer is 'They contain free electrons'

Why are Metals good conductor of heat than insulator? -General Knowledge

Description : Why are Metals good conductor of heat than insulator? -General Knowledge

Last Answer : answer:

Penny conductor or insulator?

Description : Penny conductor or insulator?

Last Answer : Copper is a conductor, so and pennies are coated in copper.

Is a coin a insulator or a conductor?

Description : Is a coin a insulator or a conductor?

Last Answer : A very good conductor.

Is Rubber insulator or conductor?

Description : Is Rubber insulator or conductor?

Last Answer : Rubber is an insulator.

Is wood a conductor or a insulator?

Description : Is wood a conductor or a insulator?

Last Answer : Wood is a conductor, though not a very good one.

Is styrofoam insulator or conductor?

Description : Is styrofoam insulator or conductor?

Last Answer : Styrofoam is an insulator.

Is copper insulator or conductor?

Description : Is copper insulator or conductor?

Last Answer : Conductor, which is why it's used for wires.

Is plastic insulator or conductor?

Description : Is plastic insulator or conductor?

Last Answer : Plastic is an insulator.

What is Insulator ?

Description : What is Insulator ?

Last Answer : A substance that has very few or no free elaine particles in its atoms and provides a lot of resistance to electric current is called insulating material.

What is the Insulator ?

Description : What is the Insulator ?

Last Answer : Every insulator is the opposite of insulator. Each insulator is associated with an indefinite combination. Given the insulator of a function, the method by which the function is found is called per-insulation.

What is Insulator ?

Description : What is Insulator ?

Last Answer : Substances through which electricity cannot move under any conditions are called insulators. Such as- glass , rubber , ebonite etc.

What is Insulator ?

Description : What is Insulator ?

Last Answer : A substance with more than 4 valence electrons is called insulator.

What is Insulator ?

Description : What is Insulator ?

Last Answer : The one through which electricity cannot flow is called insulator

Conductor Cm Conductor And Insulator I mean What ?

Last Answer : conductor Money Conductor , guide , electrically conductive , cm _ _ _ Contactor Money Pre Director , Insulator Money Non-conductive Objects.