Why reactors are provided in Thyristor bridges?

Why reactors are provided in Thyristor bridges? 
by

1 Answer

Answer :

Reactors are provided to limit the rate of rise of current (di/dt) in the device, thereby avoiding possible damage to the device. They also effect a proper sharing of load among thyristor bridges when connected in parallel. 
by

Related questions

What is purpose of connecting thyristor bridges in parallel?

Description : What is purpose of connecting thyristor bridges in parallel?

Last Answer : Thyristor bridges are connected in parallel to improve current rating.  

What is the purpose of RC network across thyristor?

Description : What is the purpose of RC network across thyristor?

Last Answer : RC network across each thyristor protects against Hole Storage Effect.  

What is Thyristor?

Description : What is Thyristor?

Last Answer : Thyristor is a four or more layer semiconductor device & having 3 or more junctions. It is also called Silicon Controlled Rectifiers (SCR). A healthy SCR must block in both the directions at least 1MΩ resistance, a fused SCR will conducts in both directions. 

When the Zero sequence reactance arises?

Description : When the Zero sequence reactance arises? 

Last Answer : If a machine is operating with an earthed neutral, a system earth fault will give rise to zero sequence current in the machine. 

When the negative sequence reactance arises?

Description : When the negative sequence reactance arises?

Last Answer : Negative sequence arises whenever there is any unbalance present in the system. Their effect is to set up a field rotating in opposite direction to the main field.

What is the advantage of field forcing in the rotor?

Description : What is the advantage of field forcing in the rotor?  

Last Answer : Field forcing acts for 10 seconds to maintain the generator terminal voltage during fault condition so as to operated the protection relays. 

What is the advantage of Static Excitation?

Description : What is the advantage of Static Excitation?  

Last Answer : Fast response time, high reliability, interchangeability of parts during operation, less wear & tear due to static devices & less maintenance.  

What is purpose of reactive power (VAR)?

Description : What is purpose of reactive power (VAR)?  

Last Answer : It is an energy required to built up magnetic field to drive the power.  

What is purpose of Slip stabilization?

Description : What is purpose of Slip stabilization?  

Last Answer : It avoids oscillation of the AC machine (Rotor oscillations).  

What is purpose of Stator current limiter?

Description : What is purpose of Stator current limiter?  

Last Answer : It limits the stator current.

What is purpose of Rotor current limiter?

Description : What is purpose of Rotor current limiter?

Last Answer : It limits overloading of rotor.  

What is purpose of Rotor angle limiter?

Description : What is purpose of Rotor angle limiter?

Last Answer : It limits generator voltage & rotor voltage.  

What is purpose of Load angle limiter?

Description : What is purpose of Load angle limiter?  

Last Answer : Load angle limiter, it either limits the angle between grid load center and the rotor axis or generator terminal & rotor axis. 

What is Inverter operation?

Description : What is Inverter operation? 

Last Answer : When firing angle a = 90º the positive & negative voltages areas are equal. With a higher than 90º the negative areas are greater so the total voltage becomes negative. This condition is termed as 'Inverter Operation".  

What is firing angle?

Description : What is firing angle? 

Last Answer : The angle in the AC cycle at which the thyristor starts conducting at the application of positive voltage to gate is known as the firing angle (α)

How over voltage is produced in Field breaker?

Description : How over voltage is produced in Field breaker?

Last Answer : Over voltages appear if synchronous generators and motors fall out of step inducing an AC voltage in the field system. Depending on the type of construction of the machine and the slip this ... -permissibly high, for this purpose over voltage protectors are provided in the field breaker cubicle.  

What is material used in making non-linear resistor & purpose of it in field discharge resistor?

Description : What is material used in making non-linear resistor & purpose of it in field discharge resistor?  

Last Answer : Silicon carbide materials used for making non-linear resistor. The purpose of this resistor is to avoid surge voltage when field breaker opens. These resistors are connected in parallel to the main field winding (Rotor). 

What is material used in making semiconductor?

Description : What is material used in making semiconductor?

Last Answer : Silicon & Germanium are the raw materials used for making semiconductor. Semiconductors are located between conductors & insulators in the resistivity spectrum & allow current to flow only under certain conditions. 

What is Diode?

Description : What is Diode?

Last Answer : Diode is a two-layer semiconductor device, conducts only positive cycles when applied to anode

Nuclear reactors are provided with shield to guard against the emission of mainly __________ rays. (A) X (B) α and β (C) Neutrons & gamma (D) Infrared

Description : Nuclear reactors are provided with shield to guard against the emission of mainly __________ rays. (A) X (B) α and β (C) Neutrons & gamma (D) Infrared

Last Answer : (C) Neutrons & gamma

Safety rods provided in nuclear reactors to guard against accidents, in case of earthquake are made of (A) High carbon steel (B) Molybdenum (C) Zircaloy (D) Boron or cadmium

Description : Safety rods provided in nuclear reactors to guard against accidents, in case of earthquake are made of (A) High carbon steel (B) Molybdenum (C) Zircaloy (D) Boron or cadmium

Last Answer : (D) Boron or cadmium

Which of the devices listed is indicated by the electronic symbol lettered as 'A', shown in the illustration? EL-0016 A. Thyristor B. Diode C. Capacitor D. Transistor

Description : Which of the devices listed is indicated by the electronic symbol lettered as 'A', shown in the illustration? EL-0016 A. Thyristor B. Diode C. Capacitor D. Transistor

Last Answer : Answer: B

What does the arrangement at coordinates '62E' shown in the illustration represent? EL-0099 A. Position recording drum and stylus B. Temperature compensating thyristor C. Miniature bridge rectifier D. Twisted wire pair within a shield

Description : What does the arrangement at coordinates '62E' shown in the illustration represent? EL-0099 A. Position recording drum and stylus B. Temperature compensating thyristor C. Miniature bridge rectifier D. Twisted wire pair within a shield

Last Answer : Answer: D

Figure 'B' shown in the illustration represents a/an ____________. EL-0067 A. silicon controlled rectifier B. junction field effect transistor C. diac thyristor D. IG MOS field effect transistor

Description : Figure 'B' shown in the illustration represents a/an ____________. EL-0067 A. silicon controlled rectifier B. junction field effect transistor C. diac thyristor D. IG MOS field effect transistor

Last Answer : Answer: A

A triac thyristor functions as a control device and is basically ________________. A. two NPN transistors in parallel with a common base lead B. a diode in series with a temperature sensitive capacitor C. two back-to-back SCR's with a common gate lead D. a triode tube with an extra heavy grid element

Description : A triac thyristor functions as a control device and is basically ________________. A. two NPN transistors in parallel with a common base lead B. a diode in series with a temperature sensitive capacitor C. two ... -back SCR's with a common gate lead D. a triode tube with an extra heavy grid element

Last Answer : Answer: C

Figure 'A' of the diagram shown in the illustration represents a/an ____________. EL-0078 A. silicon controlled rectifier B. IG or MOS field effect transistor C. triac thyristor D. junction field effect transistor

Description : Figure 'A' of the diagram shown in the illustration represents a/an ____________. EL-0078 A. silicon controlled rectifier B. IG or MOS field effect transistor C. triac thyristor D. junction field effect transistor

Last Answer : Answer: B

Figure 'B' of the diagram shown in the illustration represents a/an ____________. EL-0065 A. silicon controlled rectifier B. junction field effect transistor C. diac thyristor D. IG or MOS field effect transistor

Description : Figure 'B' of the diagram shown in the illustration represents a/an ____________. EL-0065 A. silicon controlled rectifier B. junction field effect transistor C. diac thyristor D. IG or MOS field effect transistor

Last Answer : Answer: B

What are the different losses that occur in thyristor while operating?

Description : What are the different losses that occur in thyristor while operating?

Last Answer : Different losses that occur are Forward conduction losses during conduction of the thyristor Loss due to leakage current during forward and reverse blocking. Power loss at gate or Gate triggering loss. Switching losses at turn-on and turn-off.

Why thyristor is considered as Charge controlled device?

Description : Why thyristor is considered as Charge controlled device?

Last Answer : During the triggering process of the thyristor from forward blocking state to forward conduction state through the gate signal, by applying the gate signal (voltage between gate and cathode) increases the ... By controlling the amount of charge we can control the turning on time of the scr.

Do you know the advantages of speed control using thyristor?

Description : Do you know the advantages of speed control using thyristor?

Last Answer : A: Advantages: 1. Fast Switching Characteristics than Mosfet, BJT, IGBT 2. Low cost 3. Higher Accurate.

What Are The Advantages Of Speed Control Using Thyristor?

Description : What Are The Advantages Of Speed Control Using Thyristor?

Last Answer : Advantages : Fast Switching Characterstics than Mosfet, BJT, IGBT. Low cost. Higher Accurate.

How output frequency is varied in case of a thyristor?

Description : How output frequency is varied in case of a thyristor?

Last Answer : The output frequency is varied by varying the turn off time of the thyristors in the inverter circuit, i.e. the delay angle of the thyristors is varied.

Why circuit turn off time should be greater than the thyristor turn-off time?

Description : Why circuit turn off time should be greater than the thyristor turn-off time?

Last Answer : Circuit turn off time should be greater than the thyristor turn-off time for reliable turn-off, otherwise the device may turn-on at an undesired instant, a process called commutation failure.

What losses occur in a thyristor during working conditions?

Description : What losses occur in a thyristor during working conditions?

Last Answer : a. Forward conduction losses b. Loss due to leakage current during forward and reverse blocking. c. Switching losses at turn-on and turn-off. d. Gate triggering loss.

How can a thyristor turned off?

Description : How can a thyristor turned off?

Last Answer : A thyristor can be turned off by making the current flowing through it to zero.

What are the different methods to turn on the thyristor?

Description : What are the different methods to turn on the thyristor?

Last Answer : a. Forward voltage triggering b. Gate triggering c. dv/dt triggering d. Temperature triggering e. Light triggering

Mostly long span rail-cum road bridges are provided with a) rocker & roller bearings b) segmental roller with oil bath* c) Sliding bearings d) centralised bearings

Description : Mostly long span rail-cum road bridges are provided with a) rocker & roller bearings b) segmental roller with oil bath* c) Sliding bearings d) centralised bearings

Last Answer : b) segmental roller with oil bath

For railway bridges with spans in excess of 30.5m, generally provided with a) deck type girders b) open web through girders* c) semi through girders d) shallow type girders

Description : For railway bridges with spans in excess of 30.5m, generally provided with a) deck type girders b) open web through girders* c) semi through girders d) shallow type girders

Last Answer : b) open web through girders*

Steel channel sleepers are provided in bridges with superstructure of a) PSC slab b) PSC girder c) Steel girder* d) RCC Box

Description : Steel channel sleepers are provided in bridges with superstructure of a) PSC slab b) PSC girder c) Steel girder* d) RCC Box

Last Answer : c) Steel girder*

he guard rail is provided in bridges to a) prevent derailment in bridges b) prevent falling of vehicles during derailment* c) have good riding d) guide the wheels

Description : fehe guard rail is provided in bridges to a) prevent derailment in bridges b) prevent falling of vehicles during derailment* c) have good riding d) guide the wheels

Last Answer : b) prevent falling of vehicles during derailment*

Bearings are provided in bridges to transfer the load to a) Super structure b) Track c) Embankment d) Sub structure*

Description : Bearings are provided in bridges to transfer the load to a) Super structure b) Track c) Embankment d) Sub structure*

Last Answer : d) Sub structure*

What is the so-called "notch" on an iPhone?

Description : What is the so-called "notch" on an iPhone?

Last Answer : It is a small cutout in the screen, where the front facing camera is located. It is hated, because it reduces usable screen space at the top. Imagine a webcam on top of your monitor, but instead of being actually on top, it hangs down into the screen, obscuring part of it.

A camcorder battery plate claims that the unit stores 2700mAHr at 7.2v.What is the total charge and energy stored?

Description : A camcorder battery plate claims that the unit stores 2700mAHr at 7.2v.What is the total charge and energy stored?

Last Answer : Homework?

Can anyone recommend a portable radio?

Description : Can anyone recommend a portable radio?

Last Answer : C Crane, Sangean and Eton are all quality brands. For almost 20 years I have been using something extremely similar to this: CC Skywave AM, FM, Shortwave, Weather + Alert and VHF ... /FM/Shortwave Radio $24.99 Here are some NY Times Wirecutter recommendations: The Best Emergency Weather Radio

Can one turn a profit by scavenging materials from landfills?

Description : Can one turn a profit by scavenging materials from landfills?

Last Answer : Most have laws against doing any scavenging. Had a friend that lost his jobs in early 1990's (he was VP of insurance company that collapsed) he made a living driving around affluent neighbors picking-up ... wooden box that was crushed but still locked - - surprise 3 gold rings one was worth $2000 !

What is "dirty power" and is my space heater generating it?

Description : What is "dirty power" and is my space heater generating it?

Last Answer : Harmonics, they are the source of this dirty power you speak of. DC switching power supplies are some of the worst offenders. These are transients and non 60hz frequencies that are generated by said appliance. ... your heater works but I'm guessing it uses some sort of switching to run on low power.

Any ideas on how to get a spider out of the CD player in my car?

Description : Any ideas on how to get a spider out of the CD player in my car?

Last Answer : Might want to use a hair dryer for a short time to encourage it to leave. Then, use a cd cleaning disc to remove the webbing and polish the lens.

What is happening when the engine cuts off on a newer vehicle?

Description : What is happening when the engine cuts off on a newer vehicle?

Last Answer : The engine does indeed stop and your accessories are powered by the battery. When you step on the throttle the battery sends high current to the starter which is strong enough to spin the engine up to speed. ... nice write-up in the GM system. They were one of the first to try it. Stop Start System

Is there a Headset/Gaming Headset that works for most platforms?

Description : Is there a Headset/Gaming Headset that works for most platforms?

Last Answer : Turtle Beach makes a lot of sets that work across platforms. Their stuff is pretty quality too.

Do truck manufacturers use standardized wiring harnesses regardless of the model?

Description : Do truck manufacturers use standardized wiring harnesses regardless of the model?

Last Answer : A lot do nut it of course, depends. It’s much easier to use the same harness for each vehicle in the product line. It also makes upgrades easier. This type of thing came up frequently when I was a teenager working in a car audio installation shop.