What is purpose of Rotor current limiter?

What is purpose of Rotor current limiter?
by

1 Answer

Answer :

It limits overloading of rotor.  
by

Related questions

What is purpose of Rotor angle limiter?

Description : What is purpose of Rotor angle limiter?

Last Answer : It limits generator voltage & rotor voltage.  

What is purpose of Stator current limiter?

Description : What is purpose of Stator current limiter?  

Last Answer : It limits the stator current.

What is purpose of Load angle limiter?

Description : What is purpose of Load angle limiter?  

Last Answer : Load angle limiter, it either limits the angle between grid load center and the rotor axis or generator terminal & rotor axis. 

What is the advantage of field forcing in the rotor?

Description : What is the advantage of field forcing in the rotor?  

Last Answer : Field forcing acts for 10 seconds to maintain the generator terminal voltage during fault condition so as to operated the protection relays. 

What is purpose of reactive power (VAR)?

Description : What is purpose of reactive power (VAR)?  

Last Answer : It is an energy required to built up magnetic field to drive the power.  

What is purpose of Slip stabilization?

Description : What is purpose of Slip stabilization?  

Last Answer : It avoids oscillation of the AC machine (Rotor oscillations).  

What is purpose of connecting thyristor bridges in parallel?

Description : What is purpose of connecting thyristor bridges in parallel?

Last Answer : Thyristor bridges are connected in parallel to improve current rating.  

What is the purpose of RC network across thyristor?

Description : What is the purpose of RC network across thyristor?

Last Answer : RC network across each thyristor protects against Hole Storage Effect.  

What is material used in making non-linear resistor & purpose of it in field discharge resistor?

Description : What is material used in making non-linear resistor & purpose of it in field discharge resistor?  

Last Answer : Silicon carbide materials used for making non-linear resistor. The purpose of this resistor is to avoid surge voltage when field breaker opens. These resistors are connected in parallel to the main field winding (Rotor). 

If a circuit breaker that utilizes built-in, current limiting fuses (CLF's) cannot be closed, the problem may be traced to __________. A. a blown CLF plunger holding the trip bar in the open position B. a missing CLF C. a misaligned limiter housing assembly D. all of the above

Description : If a circuit breaker that utilizes built-in, current limiting fuses (CLF's) cannot be closed, the problem may be traced to __________. A. a blown CLF plunger holding the trip bar in the open position B. a missing CLF C. a misaligned limiter housing assembly D. all of the above

Last Answer : Answer: D

The purpose of amortisseur windings in a synchronous motor is to ______________. A. reduce eddy current losses B. produce a higher power factor C. provide a means for starting D. eliminate arcing between the stator and the rotor

Description : The purpose of amortisseur windings in a synchronous motor is to ______________. A. reduce eddy current losses B. produce a higher power factor C. provide a means for starting D. eliminate arcing between the stator and the rotor

Last Answer : Answer: C

What is the purpose of current carrying bolts in rotor?

Description : What is the purpose of current carrying bolts in rotor? 

Last Answer : Feeding DC current from slip ring to rotor winding.  

When the Zero sequence reactance arises?

Description : When the Zero sequence reactance arises? 

Last Answer : If a machine is operating with an earthed neutral, a system earth fault will give rise to zero sequence current in the machine. 

When the negative sequence reactance arises?

Description : When the negative sequence reactance arises?

Last Answer : Negative sequence arises whenever there is any unbalance present in the system. Their effect is to set up a field rotating in opposite direction to the main field.

What is the advantage of Static Excitation?

Description : What is the advantage of Static Excitation?  

Last Answer : Fast response time, high reliability, interchangeability of parts during operation, less wear & tear due to static devices & less maintenance.  

Why reactors are provided in Thyristor bridges?

Description : Why reactors are provided in Thyristor bridges? 

Last Answer : Reactors are provided to limit the rate of rise of current (di/dt) in the device, thereby avoiding possible damage to the device. They also effect a proper sharing of load among thyristor bridges when connected in parallel. 

What is Inverter operation?

Description : What is Inverter operation? 

Last Answer : When firing angle a = 90º the positive & negative voltages areas are equal. With a higher than 90º the negative areas are greater so the total voltage becomes negative. This condition is termed as 'Inverter Operation".  

What is firing angle?

Description : What is firing angle? 

Last Answer : The angle in the AC cycle at which the thyristor starts conducting at the application of positive voltage to gate is known as the firing angle (α)

How over voltage is produced in Field breaker?

Description : How over voltage is produced in Field breaker?

Last Answer : Over voltages appear if synchronous generators and motors fall out of step inducing an AC voltage in the field system. Depending on the type of construction of the machine and the slip this ... -permissibly high, for this purpose over voltage protectors are provided in the field breaker cubicle.  

What is material used in making semiconductor?

Description : What is material used in making semiconductor?

Last Answer : Silicon & Germanium are the raw materials used for making semiconductor. Semiconductors are located between conductors & insulators in the resistivity spectrum & allow current to flow only under certain conditions. 

What is Thyristor?

Description : What is Thyristor?

Last Answer : Thyristor is a four or more layer semiconductor device & having 3 or more junctions. It is also called Silicon Controlled Rectifiers (SCR). A healthy SCR must block in both the directions at least 1MΩ resistance, a fused SCR will conducts in both directions. 

What is Diode?

Description : What is Diode?

Last Answer : Diode is a two-layer semiconductor device, conducts only positive cycles when applied to anode

What is the difference between alternating current and direct current?

Description : What is the difference between alternating current and direct current?

Last Answer : Direct current is a constant flow of electrons in one direction. Alternating current means that the current moves back and forth and transfers the electricity that way. DC is typically used with battery power and AC is used for long distance electricity transportation.

If you’re charging a cellular phone using a home outlet, wouldn’t the more powerful current charge a phone faster than using a vehicle’s power to charge the same cellular phone?

Description : If you’re charging a cellular phone using a home outlet, wouldn’t the more powerful current charge a phone faster than using a vehicle’s power to charge the same cellular phone?

Last Answer : Do you understand the difference between AC and DC?

Is current used up when it goes through a light globe?

Description : Is current used up when it goes through a light globe?

Last Answer : Electron energy is converted to light and heat in the resistance of the light globe.

How much current can I draw at maximum from a 6V lantern battery?

Description : How much current can I draw at maximum from a 6V lantern battery?

Last Answer : at max you could get about 2.5 volts out of that.

Why is there a small flow current during reverse bias?

Description : Why is there a small flow current during reverse bias?

Last Answer : In reverse bias there is a small flow of current due to minority charge carries electrons in p region and holes in n region.

As shown in the illustration, the purpose of the item labeled 'Z', in assembly No. 2, is to _____________. EL-0001 A. keep the rotor in balance B. align the rotor to the stator C. dynamically balance the rotor D. cool the motor

Description : As shown in the illustration, the purpose of the item labeled 'Z', in assembly No. 2, is to _____________. EL-0001 A. keep the rotor in balance B. align the rotor to the stator C. dynamically balance the rotor D. cool the motor

Last Answer : Answer: D

The purpose of the item labeled 'Z' in assembly No. 2, shown in the illustration is to _____________. EL-0001 A. keep the rotor in balance B. align the rotor to the stator C. dynamically balance the rotor D. cool the motor

Description : The purpose of the item labeled 'Z' in assembly No. 2, shown in the illustration is to _____________. EL-0001 A. keep the rotor in balance B. align the rotor to the stator C. dynamically balance the rotor D. cool the motor

Last Answer : Answer: D

The purpose of a cage rotor winding placed on the rotor of a synchronous motor is to _____________. A. provide excitation to the DC field B. start the machine as an induction motor C. contribute extra torque at synchronous speed D. prevent the machine from falling out of step

Description : The purpose of a cage rotor winding placed on the rotor of a synchronous motor is to _____________. A. provide excitation to the DC field B. start the machine as an induction motor C. contribute extra torque at synchronous speed D. prevent the machine from falling out of step

Last Answer : Answer: B

What is the purpose of rotor AC Impedance measurement?

Description : What is the purpose of rotor AC Impedance measurement?

Last Answer : Periodic measurement of rotor impedance using an AC power supply is another means of detecting the presence of shorted turns in a rotor winding. Impedance measurement is more sensitive than the ... single shorted turn opposes the MMF of the entire coil, thus greatly reducing the reactance. 

What condition must exist on both the limiter and quadrature grids for current to flow in a gated-beam detector?

Description : What condition must exist on both the limiter and quadrature grids for current to flow in a gated-beam detector?

Last Answer : Both grids must be positively biased

If an AC generator experiences voltage failure, the cause may be _____________. A. an open in the field circuit B. the brushes shifting out of the neutral plane C. excessive locked-rotor current D. a rotating slip ring

Description : If an AC generator experiences voltage failure, the cause may be _____________. A. an open in the field circuit B. the brushes shifting out of the neutral plane C. excessive locked-rotor current D. a rotating slip ring

Last Answer : Answer: A

The torque and current curves for a three-phase induction motor with a cage rotor, are shown in the illustration. Which of the following statements is true concerning the depicted curves? EL-0056 A. As slip increases, rotor reactance decreases. B. The pullout point on the torque curve is about seven times the normal full load torque value. C. At stand still, stator current is 150% of normal. D. If the motor is loaded to the point where 40% slip has resulted, it will stall.

Description : The torque and current curves for a three-phase induction motor with a cage rotor, are shown in the illustration. Which of the following statements is true concerning the depicted curves? EL-0056 A. As slip ... D. If the motor is loaded to the point where 40% slip has resulted, it will stall.

Last Answer : Answer: D

A DC generator is used to supply direct current in order to maintain an AC generator field and is known as a/an _____________. A. rotor B. stator C. exciter D. armature

Description : A DC generator is used to supply direct current in order to maintain an AC generator field and is known as a/an _____________. A. rotor B. stator C. exciter D. armature

Last Answer : Answer: C

The reactive power drawn by a motor from an AC generator is the power which is _____________. A. used to establish the magnetic field of the motor B. lost in overcoming friction in the bearings C. strictly converted to heat generated by current flow through the windings D. transmitted directly through the rotor shaft to perform useful work

Description : The reactive power drawn by a motor from an AC generator is the power which is _____________. A. used to establish the magnetic field of the motor B. lost in overcoming friction in the ... by current flow through the windings D. transmitted directly through the rotor shaft to perform useful work

Last Answer : Answer: A

In the illustrated device, the part labeled '1A' _________. EL-0001 A. are start and run windings for a single phase shaded pole induction motor B. is the stator for a polyphase induction motor C. is the armature for a squirrel cage rotor motor D. are direct current shunt field windings for a universal motor

Description : In the illustrated device, the part labeled '1A' _________. EL-0001 A. are start and run windings for a single phase shaded pole induction motor B. is the stator for a polyphase induction ... armature for a squirrel cage rotor motor D. are direct current shunt field windings for a universal motor

Last Answer : Answer: B

The air gap provided in induction motors should be checked periodically with a feeler gage to detect an unequal air gap and _____________. A. decreased motor magnetizing current B. hysteresis loses C. increased power factor D. mechanical damage to the rotor

Description : The air gap provided in induction motors should be checked periodically with a feeler gage to detect an unequal air gap and _____________. A. decreased motor magnetizing current B. hysteresis loses C. increased power factor D. mechanical damage to the rotor

Last Answer : Answer: D

Which of the following statements is true concerning the operating characteristics of a squirrel-cage motor? A. Rotor slip is dependent upon the motor load. B. An increase in motor load results in less slip. C. A decrease in rotor speed results in less generated current. D. A decrease in rotor speed produces a weaker magnetic field.

Description : Which of the following statements is true concerning the operating characteristics of a squirrel-cage motor? A. Rotor slip is dependent upon the motor load. B. An increase in motor load results in ... results in less generated current. D. A decrease in rotor speed produces a weaker magnetic field.

Last Answer : Answer: A

In a three-phase, squirrel-cage type, induction motor the rotating magnetic field is established by the _____________. A. current induced in the rotor windings B. application of a three-phase voltage supply to the stator windings C. laminated steel core and aluminum conductors in the rotor D. interaction of the magnetic field caused by the induced current in the squirrel-cage bars with the magnetic field of the stator

Description : In a three-phase, squirrel-cage type, induction motor the rotating magnetic field is established by the _____________. A. current induced in the rotor windings B. application of a three-phase voltage ... caused by the induced current in the squirrel-cage bars with the magnetic field of the stator

Last Answer : Answer: B

A characteristic of an induction motor with a low resistance rotor winding is _____________. A. high starting voltage B. high starting current C. high slippage D. low starting voltage

Description : A characteristic of an induction motor with a low resistance rotor winding is _____________. A. high starting voltage B. high starting current C. high slippage D. low starting voltage

Last Answer : Answer: B

The synchronous speed of an induction motor is the ________. A. speed at which the rotor turns B. speed of the rotating field C. frequency of the rotor current D. slip in per cent of rotor RPM

Description : The synchronous speed of an induction motor is the ________. A. speed at which the rotor turns B. speed of the rotating field C. frequency of the rotor current D. slip in per cent of rotor RPM

Last Answer : Answer: B

The rotor of a synchronous motor operates in synchronism with the rotating field because ______________. A. of the amortisseur windings B. the rotor is magnetically locked into step with the rotating magnetic field by the excitation current C. the field strength varies directly with rotor slip D. the stator flux rotates in the opposite direction

Description : The rotor of a synchronous motor operates in synchronism with the rotating field because ______________. A. of the amortisseur windings B. the rotor is magnetically locked into step with the ... field strength varies directly with rotor slip D. the stator flux rotates in the opposite direction

Last Answer : Answer: B

Regarding an induction motor, the power developed by the rotor automatically adjusts itself to the _____________. A. power required to drive the load B. speed required to drive the load C. current flow in the motor stator D. torque developed by the rotating field

Description : Regarding an induction motor, the power developed by the rotor automatically adjusts itself to the _____________. A. power required to drive the load B. speed required to drive the load C. current flow in the motor stator D. torque developed by the rotating field

Last Answer : Answer: A

Which of the following components are used to convert alternating current produced in the generator windings to direct current? A. Armature and equalizer B. Commutator and brushes C. Rotor and interpoles D. Field and exciter

Description : Which of the following components are used to convert alternating current produced in the generator windings to direct current? A. Armature and equalizer B. Commutator and brushes C. Rotor and interpoles D. Field and exciter

Last Answer : Answer: B

The rotor slots of a repulsion-type motor are generally skewed (placed nonparallel to the rotor axis) to _________. A. produce a constant starting torque B. permit a greater air gap with the starter C. permit a smaller air gap with the starter D. reduce eddy current losses

Description : The rotor slots of a repulsion-type motor are generally skewed (placed nonparallel to the rotor axis) to _________. A. produce a constant starting torque B. permit a greater air gap with the starter C. permit a smaller air gap with the starter D. reduce eddy current losses

Last Answer : Answer: A

The speed of a three-phase squirrel-cage induction-type motor operating in a fixed frequency system is varied by changing the _____________. A. number of phases to the motor B. number of stator poles C. locked rotor current D. resistance of the rotor winding

Description : The speed of a three-phase squirrel-cage induction-type motor operating in a fixed frequency system is varied by changing the _____________. A. number of phases to the motor B. number of stator poles C. locked rotor current D. resistance of the rotor winding

Last Answer : Answer: B

In a 15 HP induction-type motor with a cage rotor, the current required at standstill to produce starting torque is approximately ____________. A. half the full load current B. equal to the full load current C. five times the full load current D. ten to twenty times the full load current

Description : In a 15 HP induction-type motor with a cage rotor, the current required at standstill to produce starting torque is approximately ____________. A. half the full load current B. equal to the full load current C. five times the full load current D. ten to twenty times the full load current

Last Answer : Answer: C

A synchronous motor maintains synchronism with the rotating field because _____________. A. field strength varies directly with rotor slip B. DC current applied to the rotor coils causes the rotor magnets to lock in with the rotating flux of the stator C. the stator poles are dragged around due to the flux created by the excitation current D. the stator flux rotates in the opposite direction

Description : A synchronous motor maintains synchronism with the rotating field because _____________. A. field strength varies directly with rotor slip B. DC current applied to the rotor coils causes the rotor ... the flux created by the excitation current D. the stator flux rotates in the opposite direction

Last Answer : Answer: B

Amortisseur windings are installed in a synchronous motor to _____________. A. reduce eddy current losses B. produce a higher power factor C. provide a means for starting D. eliminate arcing between the stator and the rotor

Description : Amortisseur windings are installed in a synchronous motor to _____________. A. reduce eddy current losses B. produce a higher power factor C. provide a means for starting D. eliminate arcing between the stator and the rotor

Last Answer : Answer: C