What is the advantage of field forcing in the rotor?

What is the advantage of field forcing in the rotor?  
by

1 Answer

Answer :

Field forcing acts for 10 seconds to maintain the generator terminal voltage during fault condition so as to operated the protection relays. 
by

Related questions

What is purpose of Rotor current limiter?

Description : What is purpose of Rotor current limiter?

Last Answer : It limits overloading of rotor.  

What is purpose of Rotor angle limiter?

Description : What is purpose of Rotor angle limiter?

Last Answer : It limits generator voltage & rotor voltage.  

What is the advantage of Static Excitation?

Description : What is the advantage of Static Excitation?  

Last Answer : Fast response time, high reliability, interchangeability of parts during operation, less wear & tear due to static devices & less maintenance.  

How over voltage is produced in Field breaker?

Description : How over voltage is produced in Field breaker?

Last Answer : Over voltages appear if synchronous generators and motors fall out of step inducing an AC voltage in the field system. Depending on the type of construction of the machine and the slip this ... -permissibly high, for this purpose over voltage protectors are provided in the field breaker cubicle.  

What is material used in making non-linear resistor & purpose of it in field discharge resistor?

Description : What is material used in making non-linear resistor & purpose of it in field discharge resistor?  

Last Answer : Silicon carbide materials used for making non-linear resistor. The purpose of this resistor is to avoid surge voltage when field breaker opens. These resistors are connected in parallel to the main field winding (Rotor). 

When the Zero sequence reactance arises?

Description : When the Zero sequence reactance arises? 

Last Answer : If a machine is operating with an earthed neutral, a system earth fault will give rise to zero sequence current in the machine. 

When the negative sequence reactance arises?

Description : When the negative sequence reactance arises?

Last Answer : Negative sequence arises whenever there is any unbalance present in the system. Their effect is to set up a field rotating in opposite direction to the main field.

What is purpose of reactive power (VAR)?

Description : What is purpose of reactive power (VAR)?  

Last Answer : It is an energy required to built up magnetic field to drive the power.  

What is purpose of Slip stabilization?

Description : What is purpose of Slip stabilization?  

Last Answer : It avoids oscillation of the AC machine (Rotor oscillations).  

What is purpose of Stator current limiter?

Description : What is purpose of Stator current limiter?  

Last Answer : It limits the stator current.

What is purpose of Load angle limiter?

Description : What is purpose of Load angle limiter?  

Last Answer : Load angle limiter, it either limits the angle between grid load center and the rotor axis or generator terminal & rotor axis. 

What is purpose of connecting thyristor bridges in parallel?

Description : What is purpose of connecting thyristor bridges in parallel?

Last Answer : Thyristor bridges are connected in parallel to improve current rating.  

Why reactors are provided in Thyristor bridges?

Description : Why reactors are provided in Thyristor bridges? 

Last Answer : Reactors are provided to limit the rate of rise of current (di/dt) in the device, thereby avoiding possible damage to the device. They also effect a proper sharing of load among thyristor bridges when connected in parallel. 

What is the purpose of RC network across thyristor?

Description : What is the purpose of RC network across thyristor?

Last Answer : RC network across each thyristor protects against Hole Storage Effect.  

What is Inverter operation?

Description : What is Inverter operation? 

Last Answer : When firing angle a = 90º the positive & negative voltages areas are equal. With a higher than 90º the negative areas are greater so the total voltage becomes negative. This condition is termed as 'Inverter Operation".  

What is firing angle?

Description : What is firing angle? 

Last Answer : The angle in the AC cycle at which the thyristor starts conducting at the application of positive voltage to gate is known as the firing angle (α)

What is material used in making semiconductor?

Description : What is material used in making semiconductor?

Last Answer : Silicon & Germanium are the raw materials used for making semiconductor. Semiconductors are located between conductors & insulators in the resistivity spectrum & allow current to flow only under certain conditions. 

What is Thyristor?

Description : What is Thyristor?

Last Answer : Thyristor is a four or more layer semiconductor device & having 3 or more junctions. It is also called Silicon Controlled Rectifiers (SCR). A healthy SCR must block in both the directions at least 1MΩ resistance, a fused SCR will conducts in both directions. 

What is Diode?

Description : What is Diode?

Last Answer : Diode is a two-layer semiconductor device, conducts only positive cycles when applied to anode

The failure of ball bearings used in electric motors can result from _____________. A. failure to clean the bearing before repacking B. failure to maintain proper alignment C. excess lubrication forcing the bearing full of grease and eliminating all areas of expansion D. all of the above

Description : The failure of ball bearings used in electric motors can result from _____________. A. failure to clean the bearing before repacking B. failure to maintain proper alignment C. excess lubrication forcing the bearing full of grease and eliminating all areas of expansion D. all of the above

Last Answer : Answer: D

The purpose of a short circuit forcing module (short time trip) installed in a branch line is to provide ____________. A. high speed clearance of low impedance short circuits in the branch B. continuity of service on main bus under short circuit conditions in a branch C. isolation of short circuits by selective tripping of branch circuit breakers D. all of the above

Description : The purpose of a short circuit forcing module (short time trip) installed in a branch line is to provide ____________. A. high speed clearance of low impedance short circuits in the branch B. ... C. isolation of short circuits by selective tripping of branch circuit breakers D. all of the above

Last Answer : Answer: D

If an AC generator experiences voltage failure, the cause may be _____________. A. an open in the field circuit B. the brushes shifting out of the neutral plane C. excessive locked-rotor current D. a rotating slip ring

Description : If an AC generator experiences voltage failure, the cause may be _____________. A. an open in the field circuit B. the brushes shifting out of the neutral plane C. excessive locked-rotor current D. a rotating slip ring

Last Answer : Answer: A

A four pole, 60 Hz, three-phase synchronous motor comes up to 1760 RPM when started as an induction motor. What is the percent slip after the rotor field is energized? A. 0 B. 1.1 C. 2.2 D. 3.3

Description : A four pole, 60 Hz, three-phase synchronous motor comes up to 1760 RPM when started as an induction motor. What is the percent slip after the rotor field is energized? A. 0 B. 1.1 C. 2.2 D. 3.3

Last Answer : Answer: A

A DC generator is used to supply direct current in order to maintain an AC generator field and is known as a/an _____________. A. rotor B. stator C. exciter D. armature

Description : A DC generator is used to supply direct current in order to maintain an AC generator field and is known as a/an _____________. A. rotor B. stator C. exciter D. armature

Last Answer : Answer: C

The reactive power drawn by a motor from an AC generator is the power which is _____________. A. used to establish the magnetic field of the motor B. lost in overcoming friction in the bearings C. strictly converted to heat generated by current flow through the windings D. transmitted directly through the rotor shaft to perform useful work

Description : The reactive power drawn by a motor from an AC generator is the power which is _____________. A. used to establish the magnetic field of the motor B. lost in overcoming friction in the ... by current flow through the windings D. transmitted directly through the rotor shaft to perform useful work

Last Answer : Answer: A

In the illustrated device, the part labeled '1A' _________. EL-0001 A. are start and run windings for a single phase shaded pole induction motor B. is the stator for a polyphase induction motor C. is the armature for a squirrel cage rotor motor D. are direct current shunt field windings for a universal motor

Description : In the illustrated device, the part labeled '1A' _________. EL-0001 A. are start and run windings for a single phase shaded pole induction motor B. is the stator for a polyphase induction ... armature for a squirrel cage rotor motor D. are direct current shunt field windings for a universal motor

Last Answer : Answer: B

Routine A.C. motor maintenance should include periodic ______________. A. thermometer readings at normal loads to detect abnormal temperature rises B. inspection of the motor's internals for loose rotor bars or field poles C. bearing replacement each year using sealed units if available D. all of the above

Description : Routine A.C. motor maintenance should include periodic ______________. A. thermometer readings at normal loads to detect abnormal temperature rises B. inspection of the motor's internals for loose rotor bars ... C. bearing replacement each year using sealed units if available D. all of the above

Last Answer : Answer: A

Loss of or weak residual magnetism in an alternator or generator can be corrected for by _________________. A. running the rotor in the opposite direction for 5 minutes B. allowing the generator to run at 10% of normal speed for 5 minutes C. running the generator at normal speed with the field rheostat fully counterclockwise D. using a storage battery or battery charger to 'flash' the field

Description : Loss of or weak residual magnetism in an alternator or generator can be corrected for by _________________. A. running the rotor in the opposite direction for 5 minutes B. allowing the generator ... rheostat fully counterclockwise D. using a storage battery or battery charger to 'flash' the field

Last Answer : Answer: D

Which of the following statements is true concerning the operating characteristics of a squirrel-cage motor? A. Rotor slip is dependent upon the motor load. B. An increase in motor load results in less slip. C. A decrease in rotor speed results in less generated current. D. A decrease in rotor speed produces a weaker magnetic field.

Description : Which of the following statements is true concerning the operating characteristics of a squirrel-cage motor? A. Rotor slip is dependent upon the motor load. B. An increase in motor load results in ... results in less generated current. D. A decrease in rotor speed produces a weaker magnetic field.

Last Answer : Answer: A

In a three-phase, squirrel-cage type, induction motor the rotating magnetic field is established by the _____________. A. current induced in the rotor windings B. application of a three-phase voltage supply to the stator windings C. laminated steel core and aluminum conductors in the rotor D. interaction of the magnetic field caused by the induced current in the squirrel-cage bars with the magnetic field of the stator

Description : In a three-phase, squirrel-cage type, induction motor the rotating magnetic field is established by the _____________. A. current induced in the rotor windings B. application of a three-phase voltage ... caused by the induced current in the squirrel-cage bars with the magnetic field of the stator

Last Answer : Answer: B

Under normal conditions, the speed of a two-speed squirrel cage induction motor is changed by varying the ____________. A. frequency of the applied voltage B. resistance in the rotor circuit C. number of field poles D. amplitude of the applied voltage

Description : Under normal conditions, the speed of a two-speed squirrel cage induction motor is changed by varying the ____________. A. frequency of the applied voltage B. resistance in the rotor circuit C. number of field poles D. amplitude of the applied voltage

Last Answer : Answer: C

The speed of a wound-rotor induction motor _____________. A. will be fixed by the number of field poles B. can be varied by a rheostat-type control C. can only be synchronous speed at full load D. can only attain synchronous speed at no load

Description : The speed of a wound-rotor induction motor _____________. A. will be fixed by the number of field poles B. can be varied by a rheostat-type control C. can only be synchronous speed at full load D. can only attain synchronous speed at no load

Last Answer : Answer: B

The synchronous speed of an induction motor is the ________. A. speed at which the rotor turns B. speed of the rotating field C. frequency of the rotor current D. slip in per cent of rotor RPM

Description : The synchronous speed of an induction motor is the ________. A. speed at which the rotor turns B. speed of the rotating field C. frequency of the rotor current D. slip in per cent of rotor RPM

Last Answer : Answer: B

The rotor of a synchronous motor operates in synchronism with the rotating field because ______________. A. of the amortisseur windings B. the rotor is magnetically locked into step with the rotating magnetic field by the excitation current C. the field strength varies directly with rotor slip D. the stator flux rotates in the opposite direction

Description : The rotor of a synchronous motor operates in synchronism with the rotating field because ______________. A. of the amortisseur windings B. the rotor is magnetically locked into step with the ... field strength varies directly with rotor slip D. the stator flux rotates in the opposite direction

Last Answer : Answer: B

Regarding an induction motor, the power developed by the rotor automatically adjusts itself to the _____________. A. power required to drive the load B. speed required to drive the load C. current flow in the motor stator D. torque developed by the rotating field

Description : Regarding an induction motor, the power developed by the rotor automatically adjusts itself to the _____________. A. power required to drive the load B. speed required to drive the load C. current flow in the motor stator D. torque developed by the rotating field

Last Answer : Answer: A

Which of the following components are used to convert alternating current produced in the generator windings to direct current? A. Armature and equalizer B. Commutator and brushes C. Rotor and interpoles D. Field and exciter

Description : Which of the following components are used to convert alternating current produced in the generator windings to direct current? A. Armature and equalizer B. Commutator and brushes C. Rotor and interpoles D. Field and exciter

Last Answer : Answer: B

A synchronous motor maintains synchronism with the rotating field because _____________. A. field strength varies directly with rotor slip B. DC current applied to the rotor coils causes the rotor magnets to lock in with the rotating flux of the stator C. the stator poles are dragged around due to the flux created by the excitation current D. the stator flux rotates in the opposite direction

Description : A synchronous motor maintains synchronism with the rotating field because _____________. A. field strength varies directly with rotor slip B. DC current applied to the rotor coils causes the rotor ... the flux created by the excitation current D. the stator flux rotates in the opposite direction

Last Answer : Answer: B

The purpose of a cage rotor winding placed on the rotor of a synchronous motor is to _____________. A. provide excitation to the DC field B. start the machine as an induction motor C. contribute extra torque at synchronous speed D. prevent the machine from falling out of step

Description : The purpose of a cage rotor winding placed on the rotor of a synchronous motor is to _____________. A. provide excitation to the DC field B. start the machine as an induction motor C. contribute extra torque at synchronous speed D. prevent the machine from falling out of step

Last Answer : Answer: B

In an induction motor, rotor currents are circulated in the rotor by _____________. A. slip rings and brushes B. an armature and brushes C. inductive reaction of the rotating stator field D. external variable resistors

Description : In an induction motor, rotor currents are circulated in the rotor by _____________. A. slip rings and brushes B. an armature and brushes C. inductive reaction of the rotating stator field D. external variable resistors

Last Answer : Answer: C

Which of the following statements is true concerning a polyphase synchronous propulsion motor? A. The motor is started as an induction motor. B. Resistance is gradually added to the rotor circuit. C. The starting current is held below the rated current. D. The field winding is energized for starting purposes only.

Description : Which of the following statements is true concerning a polyphase synchronous propulsion motor? A. The motor is started as an induction motor. B. Resistance is gradually added to the rotor circuit. C. ... is held below the rated current. D. The field winding is energized for starting purposes only.

Last Answer : Answer: A

What is the speed of the rotor magnetic field with respect to rotor?

Description : What is the speed of the rotor magnetic field with respect to rotor?

Last Answer : Answer: Currents flowing through the rotor windings due to induction caused by stator will have a frequency of ( f ', which is equal to sf where f is the applied frequency to stator). This current flowing through the rotor sets up a magnetic field equal to s x Ns with respect to the rotor.

What is the direction of rotation of rotor with respect to the rotating magnetic field?

Description : What is the direction of rotation of rotor with respect to the rotating magnetic field?

Last Answer : Answer: Rotating Magnetic Field is set up when 3 phase ac supply is provided to the stator windings of the induction motor. Rotating Magnetic Field rotates at synchronous speed. Rotor rotates in the direction of the rotating magnetic field

In Induction motor Slip frequency of rotor current, when rotor speed is Nr. Then rotor producing slip field rotates with respect to stator is a) Slip frequency b) Nr c) Ns d) None

Description : In Induction motor Slip frequency of rotor current, when rotor speed is Nr. Then rotor producing slip field rotates with respect to stator is a) Slip frequency b) Nr c) Ns d) None

Last Answer : Ans: Ns

What is the so-called "notch" on an iPhone?

Description : What is the so-called "notch" on an iPhone?

Last Answer : It is a small cutout in the screen, where the front facing camera is located. It is hated, because it reduces usable screen space at the top. Imagine a webcam on top of your monitor, but instead of being actually on top, it hangs down into the screen, obscuring part of it.

A camcorder battery plate claims that the unit stores 2700mAHr at 7.2v.What is the total charge and energy stored?

Description : A camcorder battery plate claims that the unit stores 2700mAHr at 7.2v.What is the total charge and energy stored?

Last Answer : Homework?

Can anyone recommend a portable radio?

Description : Can anyone recommend a portable radio?

Last Answer : C Crane, Sangean and Eton are all quality brands. For almost 20 years I have been using something extremely similar to this: CC Skywave AM, FM, Shortwave, Weather + Alert and VHF ... /FM/Shortwave Radio $24.99 Here are some NY Times Wirecutter recommendations: The Best Emergency Weather Radio

Can one turn a profit by scavenging materials from landfills?

Description : Can one turn a profit by scavenging materials from landfills?

Last Answer : Most have laws against doing any scavenging. Had a friend that lost his jobs in early 1990's (he was VP of insurance company that collapsed) he made a living driving around affluent neighbors picking-up ... wooden box that was crushed but still locked - - surprise 3 gold rings one was worth $2000 !

What is "dirty power" and is my space heater generating it?

Description : What is "dirty power" and is my space heater generating it?

Last Answer : Harmonics, they are the source of this dirty power you speak of. DC switching power supplies are some of the worst offenders. These are transients and non 60hz frequencies that are generated by said appliance. ... your heater works but I'm guessing it uses some sort of switching to run on low power.

Any ideas on how to get a spider out of the CD player in my car?

Description : Any ideas on how to get a spider out of the CD player in my car?

Last Answer : Might want to use a hair dryer for a short time to encourage it to leave. Then, use a cd cleaning disc to remove the webbing and polish the lens.

What is happening when the engine cuts off on a newer vehicle?

Description : What is happening when the engine cuts off on a newer vehicle?

Last Answer : The engine does indeed stop and your accessories are powered by the battery. When you step on the throttle the battery sends high current to the starter which is strong enough to spin the engine up to speed. ... nice write-up in the GM system. They were one of the first to try it. Stop Start System