The size of a single plant cell is usually within the range of A.10-20μm in diameter and 25-100μm long B.20-40μm in diameter and 100-200μm long C.40-60μm in diameter and 200-300μm long D.60-80μm in diameter and 300-400μm long

The size of a single plant cell is usually within the range of
 A.10-20μm in diameter and 25-100μm long
 B.20-40μm in diameter and 100-200μm long
 C.40-60μm in diameter and 200-300μm long
 D.60-80μm in diameter and 300-400μm long
by

1 Answer

Answer :

B.20-40μm in diameter and 100-200μm long
by

Related questions

The size of a single plant cell is usually within the range of A.10-20μm in diameter and 25-100μm long B.20-40μm in diameter and 100-200μm long C.40-60μm in diameter and 200-300μm long D.60-80μm in diameter and 300-400μm long

Description : The size of a single plant cell is usually within the range of A.10-20μm in diameter and 25-100μm long B.20-40μm in diameter and 100-200μm long C.40-60μm in diameter and 200-300μm long D.60-80μm in diameter and 300-400μm long

Last Answer : B.20-40μm in diameter and 100-200μm long

For achieving rapid drying rate in a spray dryer, the diameter of the particles in the feed should be in the range of __________ microns (1 mm = 1000 microns). (A) 1-5 (B) 10-60 (C) 200-300

Description : For achieving rapid drying rate in a spray dryer, the diameter of the particles in the feed should be in the range of __________ microns (1 mm = 1000 microns). (A) 1-5 (B) 10-60 (C) 200-300

Last Answer : (B) 10-60

Brownian movement is prominent in the particle size range of __________ microns in case of settling of a particle in a fluid. (A) 2 to 3 (B) 0.01 to 0.10 (C) 200 to 300 (D) 100 to 1000

Description : Brownian movement is prominent in the particle size range of __________ microns in case of settling of a particle in a fluid. (A) 2 to 3 (B) 0.01 to 0.10 (C) 200 to 300 (D) 100 to 1000

Last Answer : A) 2 to 3

Recommended capacity of the seed box or hopper for tractor mounted (large size) seed drill is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit

Description : Recommended capacity of the seed box or hopper for tractor mounted (large size) seed drill is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit

Last Answer : d. 200-300 lit

Recommended capacity of the seed box or hopper for tractor mounted(small size) seed drill is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit

Description : Recommended capacity of the seed box or hopper for tractor mounted(small size) seed drill is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit

Last Answer : c. 100-150 lit

In cement pressure grouting G.I pipes of diameter …… and ……length, should be fixed in drilled holes a) 12 to 20 mm, 200 mm* b) 12 to 20 mm, 300 mm c) 12 to 25 mm, 500 mm d) 20 to 25 mm, 300 mm

Description : In cement pressure grouting G.I pipes of diameter …… and ……length, should be fixed in drilled holes a) 12 to 20 mm, 200 mm* b) 12 to 20 mm, 300 mm c) 12 to 25 mm, 500 mm d) 20 to 25 mm, 300 mm

Last Answer : a) 12 to 20 mm, 200 mm*

By some estimates, about ______ of our 25,000 genes are identical to those in some members of the Bacteria. a. 10 b. 20 c. 200 d. 1000

Description : By some estimates, about ______ of our 25,000 genes are identical to those in some members of the Bacteria. a. 10 b. 20 c. 200 d. 1000

Last Answer : c. 200

What is considered to be the safe limit of daily alcohol consumption by an adult man in the absence of contraindications and interacting drugs: A. 20-40 ml of ****** B. 50-100 ml of ****** C. 120-180 ml of ****** D. 200-300 ml of ******

Description : What is considered to be the safe limit of daily alcohol consumption by an adult man in the absence of contraindications and interacting drugs: A. 20-40 ml of whisky B. 50-100 ml of whisky C. 120-180 ml of whisky D. 200-300 ml of whisky

Last Answer : B. 50-100 ml of whisky

Mercury electrolytic cell produces 50-70% NaOH solution. Its operating temperature is __________ °C. (A) 25 (B) 60-70 (C) 150-200 (D) 250-300

Description : Mercury electrolytic cell produces 50-70% NaOH solution. Its operating temperature is __________ °C. (A) 25 (B) 60-70 (C) 150-200 (D) 250-300

Last Answer : (B) 60-70

The cell mass can be measured optically by determining the amount of light scattered by a suspension of cells. The measurements are usually at a wavelength of A.300-400nm B.400-500nmC.500-600nm D.600-700nm

Description : The cell mass can be measured optically by determining the amount of light scattered by a suspension of cells. The measurements are usually at a wavelength of A.300-400nm B.400-500nm C.500-600nm D.600-700nm

Last Answer : D.600-700nm

1. Assume that there are only two goods: A and B In the base year, Quantity Price A 10 $1 B 10 $4 In the current year, Quantity Price A 20 $ 5 B 25 $20 The Consumer Price Index (CPI) for the current year is: a. 50 b. 100 c. 200 d. 500 e. 60

Description : 1. Assume that there are only two goods: A and B In the base year, Quantity Price A 10 $1 B 10 $4 In the current year, Quantity Price A 20 $ 5 B 25 $20 The Consumer Price Index (CPI) for the current year is: a. 50 b. 100 c. 200 d. 500 e. 60

Last Answer : d. 500

Recommended capacity of the seed box or hopper for animal drawn is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit

Description : Recommended capacity of the seed box or hopper for animal drawn is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit

Last Answer : b. 10-60 lit

Recommended capacity of the seed box or hopper for manually operated seeder is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit

Description : Recommended capacity of the seed box or hopper for manually operated seeder is a. 2-10 lit b. 10-60 lit c. 100-150 lit d. 200-300 lit

Last Answer : a. 2-10 lit

The injection pressure of ic engine used on tractors is in range of kg/cm2 1. 0-6 2. 60-120 3. 120-200 4. 200-300

Description : The injection pressure of ic engine used on tractors is in range of kg/cm2 1. 0-6 2. 60-120 3. 120-200 4. 200-300

Last Answer : ans 3

Standard disc Plough consists of steel disc of _ diameter a) 20 to 40 cm. c) 60 to 90 cm b) 30 to 60 cm. d) 70 to 100 cm

Description : Standard disc Plough consists of steel disc of _ diameter a) 20 to 40 cm. c) 60 to 90 cm b) 30 to 60 cm. d) 70 to 100 cm

Last Answer :  60 to 90 cm

A cantilever shaft having 50 mm diameter and length of 300 mm has a disc of mass 100 kg at its free enD. The Young’s modulus for the shaft material is 200 GN/m 2 . Calculate the natural longitudinal frequency in Hz. A. 575B. 625 C. 525 D. 550

Description : A cantilever shaft having 50 mm diameter and length of 300 mm has a disc of mass 100 kg at its free enD. The Young’s modulus for the shaft material is 200 GN/m 2 . Calculate the natural longitudinal frequency in Hz. A. 575B. 625 C. 525 D. 550

Last Answer : A. 575

A cantilever shaft having 50 mm diameter and a length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 3 . Determine the static deflection of the shaft in mm. a) 0.147 b) 0.213 c) 0.132 d) 0.112

Description : A cantilever shaft having 50 mm diameter and a length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 3 . Determine the static deflection of the shaft in mm. a) 0.147 b) 0.213 c) 0.132 d) 0.112

Last Answer : a) 0.147

A cantilever shaft having 50 mm diameter and a length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 2 . Determine the frequency of transverse vibrations of the shaft. a) 31 b) 35 c) 37 d) 41

Description : A cantilever shaft having 50 mm diameter and a length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 2 . Determine the frequency of transverse vibrations of the shaft. a) 31 b) 35 c) 37 d) 41

Last Answer : d) 41

A cantilever shaft having 50 mm diameter and length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 2 . Calculate the natural longitudinal frequency in Hz. a) 575 b) 625 c) 525 d) 550

Description : A cantilever shaft having 50 mm diameter and length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 2 . Calculate the natural longitudinal frequency in Hz. a) 575 b) 625 c) 525 d) 550

Last Answer : a) 575

To the present time, over _____ antibiotic substances have been described and approximately _____ such drugs are available to the medical practitioner. a. 10,000; 100 b. 8,000; 100 c. 6000; 300 d. 4,000; 400

Description : To the present time, over _____ antibiotic substances have been described and approximately _____ such drugs are available to the medical practitioner. a. 10,000; 100 b. 8,000; 100 c. 6000; 300 d. 4,000; 400

Last Answer : b. 8,000; 100

Single-mode step-index cable has a core diameter in the range of ∙ A. 100 to 1000 micrometer ∙ B. 50 to 100 micrometer ∙ C. 2 to 15 micrometer ∙ D. 5 to 20 micrometer

Description : Single-mode step-index cable has a core diameter in the range of ∙ A. 100 to 1000 micrometer ∙ B. 50 to 100 micrometer ∙ C. 2 to 15 micrometer ∙ D. 5 to 20 micrometer

Last Answer : . 2 to 15 micrometer

What is the range of tempering temperature (°C) for most of the materials? (A) 75-100 (B) 200-300 (C) 350-450 (D) 500-600

Description : What is the range of tempering temperature (°C) for most of the materials? (A) 75-100 (B) 200-300 (C) 350-450 (D) 500-600

Last Answer : (B) 200-300

What is the range of the visible light cure beam: A. 100-120 nm B. 200-300 nm C. 400-430 nm D. 470 nm or 450-500 nm

Description : What is the range of the visible light cure beam: A. 100-120 nm B. 200-300 nm C. 400-430 nm D. 470 nm or 450-500 nm

Last Answer : D. 470 nm or 450-500 nm

What is the maximum shear stress induced in a solid shaft of 50 mm diameter which is subjected to both bending moment and torque of 300 kN.mm and 200 kN.mm respectively? a. 9.11 N/mm2 b. 14.69 N/mm2 c. 16.22 N/mm2 d. 20.98 N/mm2

Description : What is the maximum shear stress induced in a solid shaft of 50 mm diameter which is subjected to both bending moment and torque of 300 kN.mm and 200 kN.mm respectively? a. 9.11 N/mm2 b. 14.69 N/mm2 c. 16.22 N/mm2 d. 20.98 N/mm2

Last Answer : b. 14.69 N/mm2

If the price of burger rises from `12 per piece to `20 per piece as a result of which the daily sales decreases from 300 to 200 pieces per day. The price elasticity of demand can be estimated as (a) 0.5 ; (b) 0.8 ; (c) 0.25 ; (d) 2.10

Description : If the price of burger rises from `12 per piece to `20 per piece as a result of which the daily sales decreases from 300 to 200 pieces per day. The price elasticity of demand can be estimated as (a) 0.5 ; (b) 0.8 ; (c) 0.25 ; (d) 2.10

Last Answer : (a) 0.5 ;

Which one of the following bulbs has the least resistance? a. 100 watt b. 200 watt c. 300 watt d. 60 watt

Description : Which one of the following bulbs has the least resistance? a. 100 watt b. 200 watt c. 300 watt d. 60 watt

Last Answer : c. 300 wat

The largest book, the super book, is ?? and weight is ?? General Knowledge Multiple Choice Quiz Questions A. 270 cm, 300 cm, 252 kg. B. 100 cm, 110 cm, 100 kg. C. 200 cm, 100 cm, 60 kg. D. None of these

Description : The largest book, the super book, is ?? and weight is ?? General Knowledge Multiple Choice Quiz Questions A. 270 cm, 300 cm, 252 kg. B. 100 cm, 110 cm, 100 kg. C. 200 cm, 100 cm, 60 kg. D. None of these

Last Answer : A. 270 cm, 300 cm, 252 kg.

The ratio of the monthly salaries of A and B is in the ratio 15 : 16 and that of B and C is in the ratio 17 : 18. Find the monthly income of C if the total of their monthly salary is Rs 1,87,450. A) Rs 66,240 B) Rs 72,100 C) Rs 62,200 D) Rs 65,800 E) Rs 60,300

Description : The ratio of the monthly salaries of A and B is in the ratio 15 : 16 and that of B and C is in the ratio 17 : 18. Find the monthly income of C if the total of their monthly salary is Rs 1,87,450. A) Rs 66,240 B) Rs 72,100 C) Rs 62,200 D) Rs 65,800 E) Rs 60,300

Last Answer : Answer: A A/B = 15/16 and B/C = 17*18 So A : B : C = 15*17 : 16*17 : 16*18 = 255 : 272 : 288 So C’s salary = [288/(255+272+288)] * 1,87,450= Rs 66,240

Cooling towers vary in size from small roof-top units to very large hyperboloid structures that can be up to ____meters tall and _____ meters in diameter, or rectangular structures that can be over 40 meters tall and 80 meters long. a. 200&100 b. 100&50 c. 200&50 d. 200 &150

Description : Cooling towers vary in size from small roof-top units to very large hyperboloid structures that can be up to ____meters tall and _____ meters in diameter, or rectangular structures that can be over 40 meters tall and 80 meters long. a. 200&100 b. 100&50 c. 200&50 d. 200 &150

Last Answer : 200&100

Cooling towers vary in size from small roof-top units to very large hyperboloid structures that can be up to ____ meters tall and _____ meters in diameter, or rectangular structures that can be over 40 meters tall and 80 meters long. a. 200&100 b. 100&50 c. 200&50 d. 200 &150

Description : Cooling towers vary in size from small roof-top units to very large hyperboloid structures that can be up to ____ meters tall and _____ meters in diameter, or rectangular structures that can be over 40 meters tall and 80 meters long. a. 200&100 b. 100&50 c. 200&50 d. 200 &150

Last Answer : a. 200&100

Normal serum glucagons level in fasting state varies between (A) 0-–10 pg/ml (B) 20–100 pg/ml (C) 200–300 pg/ml (D) 400–500 pg/ml

Description : Normal serum glucagons level in fasting state varies between (A) 0-–10 pg/ml (B) 20–100 pg/ml (C) 200–300 pg/ml (D) 400–500 pg/ml

Last Answer : Answer : B

If a secondary coil has 40 turns, and, a primary coil with 20 turns is charged with 50 V of potential difference, then the potential difference in the secondary coil would be A. 50 V in secondary coil B. 25 V in secondary coil C. 60 V in secondary coil D. 100 V in secondary coil

Description :  If a secondary coil has 40 turns, and, a primary coil with 20 turns is charged with 50 V of potential difference, then the potential difference in the secondary coil would be A. 50 V in secondary coil B. 25 V in secondary coil C. 60 V in secondary coil D. 100 V in secondary coil

Last Answer : 100 V in secondary coil

Transmission voltage of ll kV is normally used for distances upto (a) 20—25 km (b) 40—50 km (c) 60—70 km (d) 80—100 km

Description : Transmission voltage of ll kV is normally used for distances upto (a) 20—25 km (b) 40—50 km (c) 60—70 km (d) 80—100 km

Last Answer : (a) 20—25 km

What range of frequencies are usually referred to as audio frequencies for humans? w) 0 to 20 Hertz x) 20 to 20,000 Hertz y) 200 to 200,000 Hertz z) 10,000 to 30,000 Hertz

Description : What range of frequencies are usually referred to as audio frequencies for humans? w) 0 to 20 Hertz x) 20 to 20,000 Hertz y) 200 to 200,000 Hertz z) 10,000 to 30,000 Hertz

Last Answer : ANSWER: X -- 20 TO 20,000 HERTZ

A short column 20 cm × 20 cm in section is reinforced with 4 bars whose area of cross section is 20 sq. cm. If permissible compressive stresses in concrete and steel are 40 kg/cm2 and 300 kg/cm2 , the Safe load on the column, should not exceed (A) 4120 kg (B) 41,200 kg (C) 412,000 kg (D) None of these

Description : A short column 20 cm 20 cm in section is reinforced with 4 bars whose area of cross section is 20 sq. cm. If permissible compressive stresses in concrete and steel are 40 kg/cm2 and 300 kg/cm2 , the Safe load on ... should not exceed (A) 4120 kg (B) 41,200 kg (C) 412,000 kg (D) None of these

Last Answer : Answer: Option B

The diameter of the Vicat plunger is 10 mm and its length varies from (A) 20 mm to 30 mm (B) 30 mm to 40 mm (C) 40 mm to 50 mm (D) 50 mm to 60 mm

Description : The diameter of the Vicat plunger is 10 mm and its length varies from (A) 20 mm to 30 mm (B) 30 mm to 40 mm (C) 40 mm to 50 mm (D) 50 mm to 60 mm

Last Answer : Answer: Option C

Usually viruses are separated into several large groups based primarily onA.nature of the host B.nucleic acid characteristics C.capsid symmetry D.diameter of the viroin or nucleocapsid

Description : Usually viruses are separated into several large groups based primarily on A.nature of the host B.nucleic acid characteristics C.capsid symmetry D.diameter of the viroin or nucleocapsid

Last Answer : A.nature of the host

. Molecular weight of petrol may be about (A) 40-60 (B) 100-130 (C) 250-300 (D) 350-400

Description : . Molecular weight of petrol may be about (A) 40-60 (B) 100-130 (C) 250-300 (D) 350-400

Last Answer : (B) 100-130

The usual spans with R.C.C. poles are (a) 40—50 meters (b) 60—100 meters (c) 80—100 meters (d) 300—500 meters

Description : The usual spans with R.C.C. poles are (a) 40—50 meters (b) 60—100 meters (c) 80—100 meters (d) 300—500 meters

Last Answer : (c) 80—100 meters

In the process of freeze drying, a dense cell suspension is placed in small vials and is frozen at A- 60 to -78°C B- 20 to -30°C C- 30 to -48°C D- 48 to -58°C

Description : In the process of freeze drying, a dense cell suspension is placed in small vials and is frozen at A- 60 to -78°C B- 20 to -30°C C- 30 to -48°C D- 48 to -58°C

Last Answer : - 60 to -78°C

Flat rate parcel rates Flat Rate Parcel Boxes size Dimension of boxes (in mm) Weight (in Kg.) Tariff (in Rs.) Small - S 250*50*300 0 to 1 125 Medium - M 250*100*300 Above 1 to 2.5 200 Large - L 300*250*200 Above 2.5 to 5 400

Description : Flat rate parcel rates Flat Rate Parcel Boxes size Dimension of boxes (in mm) Weight (in Kg.) Tariff (in Rs.) Small - S 250*50*300 0 to 1 125 Medium - M 250*100*300 Above 1 to 2.5 200 Large - L 300*250*200 Above 2.5 to 5 400

Last Answer : Large - L 300*250*200 Above 2.5 to 5 400

A long-term effect of which of the following procedures post acute MI induces angioneogenesis? a) Transmyocardial laser revascularization TNR procedures usually involves making 20 to 40 channels in ventricular muscle. It is thought that some blood flows into the channels, decreasing the ischemia directly. Within the next few days to months, the channels close as a result of the body’s inflammatory process of healing a wound and new blood vessels form as a result of the inflammatory process.

Description : A long-term effect of which of the following procedures post acute MI induces angioneogenesis? a) Transmyocardial laser revascularization TNR procedures usually involves making 20 to 40 channels in ventricular muscle. ... e.g., clopidigrel [Plavix]) therapy for 2 weeks and lifetime use of aspirin).

Last Answer : a) Transmyocardial laser revascularization TNR procedures usually involves making 20 to 40 channels in ventricular muscle. It is thought that some blood flows into the channels, decreasing the ischemia directly. ... healing a wound and new blood vessels form as a result of the inflammatory process.

In slump test, each layer of concrete is compacted by a steel rod 60 cm long and of 16 mm diameter for (A) 20 times (B) 25 times (C) 30 times (D) 50 time

Description : In slump test, each layer of concrete is compacted by a steel rod 60 cm long and of 16 mm diameter for (A) 20 times (B) 25 times (C) 30 times (D) 50 time

Last Answer : Answer: Option B

What is the recommended time and pressure for sterilization of media using an Autoclave A 15 min 10 lbs B 60 min 5 lbs C 15 min 15 lbs D 15 min 20 lbs

Description : What is the recommended time and pressure for sterilization of media using an Autoclave A 15 min 10 lbs B 60 min 5 lbs C 15 min 15 lbs D 15 min 20 lbs

Last Answer : C 15 min 15 lbs

Find the current density of a material with resistivity 20 units and electric field intensity 2000 units. a) 400 b) 300 c) 200 d) 100

Description : Find the current density of a material with resistivity 20 units and electric field intensity 2000 units. a) 400 b) 300 c) 200 d) 100

Last Answer : d) 100

What is the limit of MG/DL, of blood sugar in the normal person at the time of fast? (1) 40-60 (2) 120-150 (3) 70-100 (4) 160-200

Description : What is the limit of MG/DL, of blood sugar in the normal person at the time of fast? (1) 40-60 (2) 120-150 (3) 70-100 (4) 160-200

Last Answer : (3) 70-100 Explanation: The mean normal blood glucose level in humans is about 4 mM (4 mmol/L, or 72 mg/dL, i.e. milligrams/deciliter); however, this level fluctuates throughout the day. Glucose ... day (termed "the fasting level"), and rise after meals for an hour or two by a few millimolar.

A four pole turbogenerator is used in conjunction with a 160 pole propulsion motor. If the generator is turning at 3,200 RPM, what is the current speed of the propeller? A. 40 RPM B. 60 RPM C. 80 RPM D. 100 RPM

Description : A four pole turbogenerator is used in conjunction with a 160 pole propulsion motor. If the generator is turning at 3,200 RPM, what is the current speed of the propeller? A. 40 RPM B. 60 RPM C. 80 RPM D. 100 RPM

Last Answer : Answer: C

What is the limit of MG/DL of blood sugar in the normal person at the time of fast ? (1) 40-60 (2) 120-150 (3) 70-100 (4) 160-200

Description : What is the limit of MG/DL of blood sugar in the normal person at the time of fast ? (1) 40-60 (2) 120-150 (3) 70-100 (4) 160-200

Last Answer : 70-100

A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the force exerted by the jet on the plate would be in the range a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Description : A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the ... a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Last Answer : a. 15 - 20 kg

n Widal test the significant titres for H agglutinins is A- 1:50 or more B- 1:100 ormore C- 1:200 or more D- 1:400 or more

Description : n Widal test the significant titres for H agglutinins is A- 1:50 or more B- 1:100 ormore C- 1:200 or more D- 1:400 or more

Last Answer : 1:200 or more