Description : Maximum shear stress theory is also called as (a) Beltrami theory (b) Haigh theory (c) Tresca theory (d) None
Last Answer : (c) Tresca theory
Description : Maximum shear stress theory is also called as (a) Beltrami theory (b) Coulomb’s theory (c) Haigh theory (d) None
Last Answer : (b) Coulomb’s theory
Description : Maximum principal strain theory is also called as (a) Guest’s theory (b) Haigh theory (c) St.Venant’s theory (d) None
Last Answer : (c) St.Venant’s theory
Description : Maximum total strain energy theory is also known as (a) Guest’s theory (b) Haigh theory (c) St.Venant’s theory (d) None
Last Answer : (b) Haigh theory
Description : Which theory is perfect for design of shaft when it mades from brittle materials........... A. Rankine theory B. Guest's theory C. Vonmises theory D. St. Venant's theory.
Last Answer : A. Rankine theory
Description : Shear strain energy theory is also known as (a) Coulomb’s theory (b) Distortion energy theory (c) Rankine theory (d) None
Last Answer : (b) Distortion energy theory
Description : Shear strain energy theory is also known as (a) Von Mises Theory (b) Coulomb’s theory (c) Rankine theory (d) None
Last Answer : (a) Von Mises Theory
Description : Shear strain energy theory is also known as ( a) Huber theory (b) Rankine theory (c) Mises-Hencky theory (d) None
Last Answer : (c) Mises-Hencky theory
Description : Maximum total strain energy theory is also known as (a) Huber theory (b) Rankine theory (c) St.Venant’s theory (d) None
Last Answer : (a) Huber theory
Description : Maximum principal theory is also known as (a) Guest Theory (b) Beltrami Theory (c) Rankine Theory (d) None
Last Answer : (c) Rankine Theory
Description : A power transmitting ductile material shaft under P, T and M will be designed on the basis of (a) Rankine theory (b) Guest Theory (c) Haigh theory (d) None
Last Answer : (b) Guest Theory
Description : Among maximum shear stress theory and distortion energy theory, which gives the higher value shear yield strength? a) Maximum shear stress theory b) Distortion energy theory c) Both give equal values d) Vary from material to material
Last Answer : b) Distortion energy theory
Description : Maximum shear stress theory is used for (A) Cast iron shafts (B) Steel shafts (C) Flexible shafts (D) Plastic shafts
Last Answer : (B) Steel shafts
Description : A transmission shaft subjected to pure bending moment should be designed on the basis of (A) Maximum principal stress theory (B) Maximum shear stress theory (C) Distortion energy theory (D) Goodman or Soderberg diagrams
Last Answer : (A) Maximum principal stress theory
Description : For a homogeneous & isotropic body under hydrostatic pressure, which theory of elastic failure does not fail (a) Firstly Maximum Principal Theory (b) Secondly Maximum Shear Stress Theory (c) Thirdly Maximum Principal Energy Theory (d) None
Last Answer : (a) Firstly Maximum Principal Theory
Description : Under complex loading, if elastic limit reaches in tension, then failure occurs due to (a) Firstly Maximum principal strain theory (b) Secondly Maximum principal theory of strain energy (c) Thirdly Maximum shear stress theory (d) None
Last Answer : (d) None
Description : A ductile material may not meet a failure if it has been tested for the theories of failure (a) Firstly Maximum Shear Stress Theory (b) Secondly Maximum Shear Strain Energy Theory (c) Both (a) & (b) (d) None
Last Answer : (c) Both (a) & (b)
Description : Under maximum shear stress theory, maximum shear stress is equal to (a) Allowable stress in tension (b) Allowable stress in compression (c) Allowable stress in shear (d) None
Last Answer : (c) Allowable stress in shear
Description : Maximum shear stress theory is applicable to (a) Ductile materials (b) Brittle materials (c) Composite materials
Last Answer : (a) Ductile materials
Description : Under maximum principal stress theory, maximum principal stress is equal to (a) Allowable stress in tension (b) Allowable stress in compression (c) Allowable stress in shear (d) None
Last Answer : (a) Allowable stress in tension
Description : Distortion energy theory is slightly liberal as compared to maximum shear stress theory. a) True b) False
Last Answer : a) True
Description : The region of safety in maximum shear stress theory contains which of the given shape a) Hexagon b) Rectangle c) Square d) None of the mentioned
Last Answer : a) Hexagon
Description : Maximum shear stress theory for the failure of a material at the elastic limit, is known (A) Guest's or Trecas' theory (B) St. Venant's theory (C) Rankine's theory (D) Haig's theory
Last Answer : (A) Guest's or Trecas' theory
Description : Maximum principal theory is also known as (a) Beltrami Theory (b) Maximum normal stress theory (c) Saint Venant’s theory (d) None
Last Answer : (b) Maximum normal stress theory
Description : Find the shear stress in a flange at the junction of hub in rigid flanged coupling if torsional moment is 2980N-m and diameter of hub being 125mm. Also the thickness of flange is 25mm. a) 6.77N/mm2 b) 10.24N/mm2 c) 4.84N/mm2 d) 4.22N/mm2
Last Answer : c) 4.84N/mm2
Description : The maximum shear stress in spring wire is induced at (A) Inner surface of the coil (B) Outer surface of the coil (C) Central surface of the coil (D) End coils
Last Answer : (A) Inner surface of the coil
Description : Parallel fillet weld and transverse fillet weld both have the plane in which maximum shear stress occurs at 45’ to the leg dimension. a) True b) False
Last Answer : b) False
Description : Maximum shear stress in transverse fillet weld of leg h and length l is a) P/hl b) 1.21P/hl c) P/1.21hl d) None of the listed
Last Answer : b) 1.21P/hl
Description : According to the ASME code, maximum allowable shear stress is taken as X% of yield strength or Y% of ultimate strength. a) X=30 Y=18 b) X=30 Y=30 c) X=18 Y=18 d) X=18 Y=30
Last Answer : a) X=30 Y=18
Description : Maximum shear stress is equal to (a) (σ1 –σ2)/2 (b) (σ1 + σ2)/2 (c) (σ1 + 2σ2)/2 (d) None
Last Answer : (a) (σ1 –σ2)/2
Description : Ellipse of stress is used to find a. Resultant stress on any plane in a bi-axial stress system b. Resultant stress on any plane in a general two dimensional system c. Maximum shear stress d. Location of planes of maximum shear stress
Last Answer : a. Resultant stress on any plane in a bi-axial stress system
Description : In a general two dimensional stress system, planes of maximum shear stress are inclined at ___ with principal planes. a. 90 degree b. 180 degree c. 45 degree d. 60 degree
Last Answer : c. 45 degree
Description : Principal planes are those planes on which a. Normal stress is maximum b. Normal stress is minimum c. Normal stress is either maximum or minimum d. Shear stress is maximum
Last Answer : c. Normal stress is either maximum or minimum
Description : Maximum shear stress in terms of principal stresses is a. Firstly (σ 1 +σ 2 )/2 b. Secondly (σ 1 /σ 2 ) c. Thirdly (σ 1 –σ 2 )/2 d. None
Last Answer : c. Thirdly (σ 1 –σ 2 )/2
Description : Does a plane of maximum shear stress contain a? (a) Normal stress (b) Bending stress (c) Torsional shear stress (d) None
Last Answer : (a) Normal stress
Description : The magnitude of maximum shear stress is (a) ± (1/2)[ ((σx –σy) 2 + 4 τ 2 )) 0.5 ] (b) ± (1/2)[ (1/2)((σx –σy) 2 + 4 τ 2 )) 0.5 ] (c) ± (1/2)[ ((1/2)(σx –σy) 2 + 4 τ 2 )) 0.5 ] (d) None
Last Answer : (a) ± (1/2)[ ((σx –σy) 2 + 4 τ 2 )) 0.5 ]
Description : Maximum shear stress is (a) Average sum of principal stresses (b) Average difference of principal stresses (c) Average sum as well as difference of principal stresses (d) None
Last Answer : (b) Average difference of principal stresses
Description : The bending moment ‘M’ and a torque ‘T’ is applied on a solid circular shaft. If the maximum bending stress equals to maximum shear stress developed, then ‘M’ is equal to (A) T/2 (B) T (C) 2 T (D) 4 T
Last Answer : (A) T/2
Description : Maximum principle stress theory is used for (A) Cast iron shafts (B) Steel shafts (C) Aluminum shafts (D) Plastic shafts
Last Answer : (A) Cast iron shafts
Description : Under complex loading, if elastic limit reaches in tension, then failure occurs due to (a) Firstly Maximum principal strain theory (b) Secondly Maximum principal theory of strain energy (c) Thirdly Maximum Principal stress theory (d) None
Last Answer : (c) Thirdly Maximum Principal stress theory
Description : Maximum principal stress theory is applicable to (a) Ductile materials (b) Brittle materials (c) Composite materials (d) None
Last Answer : (b) Brittle materials
Description : Maximum Principal Stress Theory is not good for brittle materials. a) True b) False
Description : If compressive yield stress and tensile yield stress are equivalent, then region of safety from maximum principal stress theory is of which shape? a) Rectangle b) Square c) Circle d) Ellipse
Last Answer : b) Square
Description : Maximum principal stress theory for the failure of a material at elastic point, is known (A) Guest's or Trecas' theory (B) St. Venant's theory (C) Rankine's theory (D) Von Mises' theory
Last Answer : (C) Rankine's theory
Description : Shear strain energy theory for the failure of a material at elastic limit, is due to (A) Rankine (B) Guest or Trecas (C) St. Venant (D) Von Mises
Last Answer : (D) Von Mises
Description : Rankine Gordon formula for buckling is valid for (A) Long column (B) Short column (C) Short and long column (D) Very long column
Last Answer : (C) Short and long column
Description : The spokes of the flywheel are subjected to 1. direct shear stress 2. torsional shear stress 3. tensile stress 4. compressive stress
Last Answer : 3. tensile stress