Rankine Gordon formula for buckling is valid for (A) Long column (B) Short column (C) Short and long column (D) Very long column

Rankine Gordon formula for buckling is valid for

(A) Long column

(B) Short column

(C) Short and long column

(D) Very long column
by

1 Answer

Answer :

(C) Short and long column
by

Related questions

Rankine-Golden formula accounts for direct as well as buckling stress and is applicable to (A) Very long columns (B) Long columns (C) Short columns (D) Intermediate columns

Description : Rankine-Golden formula accounts for direct as well as buckling stress and is applicable to (A) Very long columns (B) Long columns (C) Short columns (D) Intermediate columns

Last Answer : (D) Intermediate columns

The Rankine formula holds good for (a) Short column (b) Long column (c) Medium column (d) Both short and long column

Description : The Rankine formula holds good for (a) Short column (b) Long column (c) Medium column (d) Both short and long column

Last Answer : (d) Both short and long column

Pure Buckling uses the equation of (a) Rankin-Gordon (b) Euler (c) Stiffness (d) None

Description : Pure Buckling uses the equation of (a) Rankin-Gordon (b) Euler (c) Stiffness (d) None

Last Answer : (b) Euler

Pure Buckling occurs in a (a) Short column (b) Medium Column (c) Long column (d) None

Description : Pure Buckling occurs in a (a) Short column (b) Medium Column (c) Long column (d) None

Last Answer : (c) Long column

Euler's formula states that the buckling load for a column of length , both ends hinged and whose least moment of inertia and modulus of elasticity of the material of the column are and respectively, is given by the relation (A) P = ²EI/l² (B) P = /EI (C) P = /l² (D) P = ²EI/l

Description : Euler's formula states that the buckling load for a column of length , both ends hinged and whose least moment of inertia and modulus of elasticity of the material of the column are and respectively, is given by the relation (A) P = ²EI/l² (B) P = /EI (C) P = /l² (D) P = ²EI/l

Last Answer : (A) P = ²EI/l²

A spring with index=15 is prone to buckling. a) True b) False

Description : A spring with index=15 is prone to buckling. a) True b) False

Last Answer : a) True

The purpose of lateral ties in short R.C. columns is to (a) Increase the load carrying capacity of column (b) Facilitate compaction of concrete (c) Facilitate construction (d) Avoid buckling of longitudinal bars

Description : The purpose of lateral ties in short R.C. columns is to (a) Increase the load carrying capacity of column (b) Facilitate compaction of concrete (c) Facilitate construction (d) Avoid buckling of longitudinal bars

Last Answer : (d) Avoid buckling of longitudinal bars

Which theory is perfect for design of shaft when it mades from brittle materials........... A. Rankine theory B. Guest's theory C. Vonmises theory D. St. Venant's theory.

Description : Which theory is perfect for design of shaft when it mades from brittle materials........... A. Rankine theory B. Guest's theory C. Vonmises theory D. St. Venant's theory.

Last Answer : A. Rankine theory

Shear strain energy theory is also known as (a) Coulomb’s theory (b) Distortion energy theory (c) Rankine theory (d) None

Description : Shear strain energy theory is also known as (a) Coulomb’s theory (b) Distortion energy theory (c) Rankine theory (d) None

Last Answer : (b) Distortion energy theory

Shear strain energy theory is also known as (a) Von Mises Theory (b) Coulomb’s theory (c) Rankine theory (d) None

Description : Shear strain energy theory is also known as (a) Von Mises Theory (b) Coulomb’s theory (c) Rankine theory (d) None

Last Answer : (a) Von Mises Theory

Shear strain energy theory is also known as ( a) Huber theory (b) Rankine theory (c) Mises-Hencky theory (d) None

Description : Shear strain energy theory is also known as ( a) Huber theory (b) Rankine theory (c) Mises-Hencky theory (d) None

Last Answer : (c) Mises-Hencky theory

Maximum total strain energy theory is also known as (a) Huber theory (b) Rankine theory (c) St.Venant’s theory (d) None

Description : Maximum total strain energy theory is also known as (a) Huber theory (b) Rankine theory (c) St.Venant’s theory (d) None

Last Answer : (a) Huber theory

Maximum shear stress theory is also called as (a) Guest’s theory (b) Haigh theory (c) Rankine theory (d) None

Description : Maximum shear stress theory is also called as (a) Guest’s theory (b) Haigh theory (c) Rankine theory (d) None

Last Answer : (a) Guest’s theory

Maximum principal theory is also known as (a) Guest Theory (b) Beltrami Theory (c) Rankine Theory (d) None

Description : Maximum principal theory is also known as (a) Guest Theory (b) Beltrami Theory (c) Rankine Theory (d) None

Last Answer : (c) Rankine Theory

Pick up the correct statement from the following: (A) The structural member subjected to compression and whose dimensions are small as compared to its length, is called a stmt (B) The vertical compression members are generally known as columns or stanchions (C) Deflection in lateral direction of a long column, is generally known as buckling (D) All the above

Description : Pick up the correct statement from the following:  (A) The structural member subjected to compression and whose dimensions are small as  compared to its length, is called a stmt  (B) The ... in lateral direction of a long column, is generally known as buckling  (D) All the above

Last Answer : (D) All the above

The ratio of the effective length of a column and minimum radius of gyration of its cross-sectional area, is known (A) Buckling factor (B) Slenderness ratio (C) Crippling factor (D) None of these

Description : The ratio of the effective length of a column and minimum radius of gyration of its cross-sectional area, is known (A) Buckling factor (B) Slenderness ratio (C) Crippling factor (D) None of these

Last Answer : (B) Slenderness ratio

Columns of given length, cross-section and material have different values of buckling loads for different end conditions. The strongest column is one whose (A) One end is fixed and other end is hinged (B) Both ends are hinged or pin jointed (C) One end is fixed and the other end entirely free (D) Both the ends are fixed

Description : Columns of given length, cross-section and material have different values of buckling loads for different end conditions. The strongest column is one whose (A) One end is fixed and other end is hinged (B) Both ... (C) One end is fixed and the other end entirely free (D) Both the ends are fixed

Last Answer : (D) Both the ends are fixed

The most critical consideration in the design of a rolled steel column carrying axial loads is the (a) Percentage elongation at yield and the net cross-sectional area (b) Critical bending strength and axial yield strength of material (c) Buckling strength based on the net area of the section and percentage elongation at ultimate load (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Description : The most critical consideration in the design of a rolled steel column carrying axial loads is the (a) Percentage elongation at yield and the net cross-sectional area (b) Critical bending ... at ultimate load (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Last Answer : (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

The ratio of the effective length of a column and minimum radius of gyration of its cross sectionalarea, is known (a) Buckling factor (b) Slenderness ratio (c) Crippling factor (d) None of these

Description : The ratio of the effective length of a column and minimum radius of gyration of its cross sectionalarea, is known (a) Buckling factor (b) Slenderness ratio (c) Crippling factor (d) None of these

Last Answer : (b) Slenderness ratio

Columns of given length, cross-section and material have different values of buckling loads for different end conditions. The strongest column is one whose (a) One end is fixed and other end is hinged (b) Both ends are hinged or pin jointed (c) One end is fixed and the other end entirely free (d) Both the ends are fixed

Description : Columns of given length, cross-section and material have different values of buckling loads for different end conditions. The strongest column is one whose (a) One end is fixed and other end is hinged (b) ... (c) One end is fixed and the other end entirely free (d) Both the ends are fixed

Last Answer : (d) Both the ends are fixed

With identical beam and column, buckling occurs as compared to bending under a (a) Lesser load (b) Larger load (c) Equal load (d) None

Description : With identical beam and column, buckling occurs as compared to bending under a (a) Lesser load (b) Larger load (c) Equal load (d) None

Last Answer : (a) Lesser load

Buckling of a column occurs under (a) Axial load (b) Transverse load (c) Direct load (d) None

Description : Buckling of a column occurs under (a) Axial load (b) Transverse load (c) Direct load (d) None

Last Answer : (a) Axial load

Euler’s formula is not valid for mild steel column when slenderness ratio is (a) More than 100 (b) Less than 100 (c) Less than 80 (d)More than 80

Description : Euler’s formula is not valid for mild steel column when slenderness ratio is (a) More than 100 (b) Less than 100 (c) Less than 80 (d)More than 80

Last Answer : (c) Less than 80

The equations for principal stresses are valid only when (a)σ x and σ y are both tensile (b) σ x is compressive and σ y is tensile (c) σ x is tensile and σ y is compressive (d) None

Description : The equations for principal stresses are valid only when (a)σ x and σ y are both tensile (b) σ x is compressive and σ y is tensile (c) σ x is tensile and σ y is compressive (d) None

Last Answer : (a)σ x and σ y are both tensile

Long and short spans of a two way slab are ly and lx and load on the slab acting on strips parallel to lx and ly be wx and wy respectively. According to Rankine Grashoff theory (A) (wx /wy ) = (ly /lx ) (B) (wx/wy) = (ly/lx)² (C) (wx /wy ) = (ly /lx )4 (D) None of these

Description : Long and short spans of a two way slab are ly and lx and load on the slab acting on strips parallel to lx and ly be wx and wy respectively. According to Rankine Grashoff theory (A) (wx /wy ) = (ly /lx ) (B) (wx/wy) = (ly/lx)² (C) (wx /wy ) = (ly /lx )4 (D) None of these

Last Answer : Answer: Option C

A bracket is shown welded to a vertical column by means of two fillet welds. The bending stress induced in the welds can be given by a) My/I b) 2My/I c) My/2I d) None of the listed

Description : A bracket is shown welded to a vertical column by means of two fillet welds. The bending stress induced in the welds can be given by a) My/I b) 2My/I c) My/2I d) None of the listed

Last Answer : a) My/I

The following bracket is welded to the vertical column. The joint undergoes torsional stresses. a) True b) False

Description : The following bracket is welded to the vertical column. The joint undergoes torsional stresses. a) True b) False

Last Answer : b) False

A column of length l is fixed at both ends. The equivalent length of the column is (A) l/2 (B) l/√2 (C) l (D) 2 l

Description : A column of length l is fixed at both ends. The equivalent length of the column is (A) l/2 (B) l/√2 (C) l (D) 2 l

Last Answer : (A) l/2

The purpose of lateral ties in short reinforced concrete columns is to [ A ] Facilitate construction [ B ] Facilitate compaction of concrete [ C ] Increase the load carrying capacity of the columns [ D ] Avoid buckling of longitudinal bars

Description : The purpose of lateral ties in short reinforced concrete columns is to [ A ] Facilitate construction [ B ] Facilitate compaction of concrete [ C ] Increase the load carrying capacity of the columns [ D ] Avoid buckling of longitudinal bars

Last Answer : [ D ] Avoid buckling of longitudinal bars

Design of a two way slab simply supported on edges and having no provision to prevent the corners from lifting, is made by (A) Rankine formula (B) Marcus formula (C) Rankine Grashoff formula (D) Grashoff formula

Description : Design of a two way slab simply supported on edges and having no provision to prevent the corners from lifting, is made by (A) Rankine formula (B) Marcus formula (C) Rankine Grashoff formula (D) Grashoff formula

Last Answer : Answer: Option C

On a very hot summer day, railroad tracks can buckle, causing train delays and derailments. Select the best reason below for the buckling?

Description : On a very hot summer day, railroad tracks can buckle, causing train delays and derailments. Select the best reason below for the buckling?

Last Answer : The metal undergoes thermal expansion.

A gaseous organic compound that is best known for its use in preservative solutions has the chemical formula HCHO (read: H - C - H CHEM-92; Short Answer: Give me the name and atomic number of the element I am thinking about. It occupies the same column in the periodic table as selenium. Under standard conditions of temperature and pressure this element is a clear, odorless gas. This element is one of the essential ingredients in the burning process.

Description : A gaseous organic compound that is best known for its use in preservative solutions has the chemical formula HCHO (read: H - C - H CHEM-92; Short Answer: Give me the name and atomic number ... element is a clear, odorless gas. This element is one of the essential ingredients in the burning process.

Last Answer : ANSWER: OXYGEN ATOMIC NUMBER = 8

The length to diameter ratio for a short bearing is (A) More than 1 (B) Less than 1 (C) 8

Description : The length to diameter ratio for a short bearing is (A) More than 1 (B) Less than 1 (C) 8

Last Answer : (B) Less than 1

For long columns, the value of buckling load is……………..crushing load. (a) Less than (b) More than (c) Equal to (d) None of these

Description : For long columns, the value of buckling load is……………..crushing load. (a) Less than (b) More than (c) Equal to (d) None of these

Last Answer : (a) Less than

Needles bearing consist of rollers of small diameter and very small length. (a) True (b) False

Description : Needles bearing consist of rollers of small diameter and very small length. (a) True (b) False

Last Answer : (b) False

Which one of the following bearing is intended for a very heavy radial load? (a) Ball bearing (b) Self-aligning roller bearing (c) Roller bearing (d) Thrust bearing

Description : Which one of the following bearing is intended for a very heavy radial load? (a) Ball bearing (b) Self-aligning roller bearing (c) Roller bearing (d) Thrust bearing

Last Answer : (b) Self-aligning roller bearing

Deep groove ball bearings create a lot of noise. (a) Yes (b) Depends on the application (c) They create very less noise (d) No reference frame for comparison is mentioned

Description : Deep groove ball bearings create a lot of noise. (a) Yes (b) Depends on the application (c) They create very less noise (d) No reference frame for comparison is mentioned

Last Answer : (c) They create very less noise

The rolling contact bearings as compared to sliding contact bearings have (a) small overall dimensions (b) accuracy of shaft alignment (c) low starting and low running friction except at very high speeds (d) all the mentioned

Description : The rolling contact bearings as compared to sliding contact bearings have (a) small overall dimensions (b) accuracy of shaft alignment (c) low starting and low running friction except at very high speeds (d) all the mentioned

Last Answer : (d) all the mentioned

The most suitable bearing for carrying very heavy loads with slow speed is (a) Hydrodynamic bearing (b) ball bearing [IAS 1994] (c) Roller bearing (d) hydrostatic bearing

Description : The most suitable bearing for carrying very heavy loads with slow speed is (a) Hydrodynamic bearing (b) ball bearing [IAS 1994] (c) Roller bearing (d) hydrostatic bearing

Last Answer : (d) hydrostatic bearing

Needles bearing consist of rollers of small diameter and very small length. a) True b) False

Description : Needles bearing consist of rollers of small diameter and very small length. a) True b) False

Last Answer : b) False

Deep groove ball bearings creates a lot of noise. a) Yes b) They create very less noise c) Depends on the application d) No reference frame for comparison is mentioned

Description : Deep groove ball bearings creates a lot of noise. a) Yes b) They create very less noise c) Depends on the application d) No reference frame for comparison is mentioned

Last Answer : b) They create very less noise

The helix angle is very small about 20. The spring is open coiled spring. a) Yes b) It is closed coiled spring c) That small angle isn’t possible d) None of the listed

Description : The helix angle is very small about 20. The spring is open coiled spring. a) Yes b) It is closed coiled spring c) That small angle isn’t possible d) None of the listed

Last Answer : b) It is closed coiled spring

A knuckle joint can be used in valve mechanism of a reciprocating engine. a) Yes b) No c) Yes but there are stress probles d) No as it is very dangerous to use

Description : A knuckle joint can be used in valve mechanism of a reciprocating engine. a) Yes b) No c) Yes but there are stress probles d) No as it is very dangerous to use

Last Answer : a) Yes

Flexible shafts have ______ rigidity in bending moment. a) High b) Low c) Very high d) Extremely low

Description : Flexible shafts have ______ rigidity in bending moment. a) High b) Low c) Very high d) Extremely low

Last Answer : b) Low

Flexible shafts have _______ rigidity in torsion making them flexible. a) Low b) High c) Very high d) Infinitely small

Description : Flexible shafts have _______ rigidity in torsion making them flexible. a) Low b) High c) Very high d) Infinitely small

Last Answer : b) High

Flexible shafts have ______ rigidity in bending moment. a) High b) Low c) Very high d) Extremely low

Description : Flexible shafts have ______ rigidity in bending moment. a) High b) Low c) Very high d) Extremely low

Last Answer : b) Low

A column is said to be a short column, when (a) its length is very small (b) its cross-sectional area is small (c) the ratio of its length to the least radhis of gyration is less than 80 (d) the ratio of its length to the least radius of gyration is more than 80

Description : A column is said to be a short column, when (a) its length is very small (b) its cross-sectional area is small (c) the ratio of its length to the least radhis of gyration is less than 80 (d) the ratio of its length to the least radius of gyration is more than 80

Last Answer : (c) the ratio of its length to the least radhis of gyration is less than 80

Fenske-Underwood equation used for calculating the minimum number of theoretical plates in distillation column is valid for (A) Constant molal overflow (B) Total reflux (C) Constant relative volatility (D) All (A), (B) and (C)

Description : Fenske-Underwood equation used for calculating the minimum number of theoretical plates in distillation column is valid for (A) Constant molal overflow (B) Total reflux (C) Constant relative volatility (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

……………….. contains information that defines valid values that are stored in a column or data type. A) View B) Rule C) Index D) Default

Description : ……………….. contains information that defines valid values that are stored in a column or data type. A) View B) Rule C) Index D) Default

Last Answer : C) Index