In a body under hydrostatic pressure, the case exists (a) Firstly σ 1 > σ 2 =σ 3 (b) Secondly σ 1 = σ 2 =σ 3 (c) Thirdly σ 1 > σ 2 < σ 3 (d) None

In a body under hydrostatic pressure, the case exists

(a) Firstly σ 1 > σ 2 =σ 3

(b) Secondly σ 1 = σ 2 =σ 3

(c) Thirdly σ 1 > σ 2 < σ 3

(d) None
by

1 Answer

Answer :

(b) Secondly σ 1 = σ 2 =σ 3
by

Related questions

For a homogeneous & isotropic body under hydrostatic pressure, which theory of elastic failure does not fail (a) Firstly Maximum Principal Theory (b) Secondly Maximum Shear Stress Theory (c) Thirdly Maximum Principal Energy Theory (d) None

Description : For a homogeneous & isotropic body under hydrostatic pressure, which theory of elastic failure does not fail (a) Firstly Maximum Principal Theory (b) Secondly Maximum Shear Stress Theory (c) Thirdly Maximum Principal Energy Theory (d) None

Last Answer : (a) Firstly Maximum Principal Theory

For a homogeneous & isotropic body under hydrostatic pressure, which theory of elastic failure fails (a) Firstly Maximum Principal Theory (b) Secondly Maximum Principal strain Theory (c) Thirdly Maximum Principal Energy Theory (d) None

Description : For a homogeneous & isotropic body under hydrostatic pressure, which theory of elastic failure fails (a) Firstly Maximum Principal Theory (b) Secondly Maximum Principal strain Theory (c) Thirdly Maximum Principal Energy Theory (d) None

Last Answer : (c) Thirdly Maximum Principal Energy Theory

Under complex loading, principal stresses exist as (a) Firstly σ 1 > σ 2 =σ 3 (b) Secondly σ 1 = σ 2 =σ 3 (c) Thirdly σ 1 > σ 2 < σ 3 (d) None

Description : Under complex loading, principal stresses exist as (a) Firstly σ 1 > σ 2 =σ 3 (b) Secondly σ 1 = σ 2 =σ 3 (c) Thirdly σ 1 > σ 2 < σ 3 (d) None

Last Answer : (d) None

Maximum shear stress in terms of principal stresses is a. Firstly (σ 1 +σ 2 )/2 b. Secondly (σ 1 /σ 2 ) c. Thirdly (σ 1 –σ 2 )/2 d. None

Description : Maximum shear stress in terms of principal stresses is a. Firstly (σ 1 +σ 2 )/2 b. Secondly (σ 1 /σ 2 ) c. Thirdly (σ 1 –σ 2 )/2 d. None

Last Answer : c. Thirdly (σ 1 –σ 2 )/2

The magnitude of maximum principal stress is a. Firstly (σ x +σ y )/2+ (1/2)( σ x +σ y ) +4τ 2 ) 5 b. Secondly (σ x +σ y )/2+ (1/2)( σ x -σ y ) 2 +4τ 2 ) 5 c. Thirdly (σ x +σ y )/2+ (1/2)( σ x +σ y ) 2 +4τ 2 ) 5 d. None

Description : The magnitude of maximum principal stress is a. Firstly (σ x +σ y )/2+ (1/2)( σ x +σ y ) +4τ 2 ) 5 b. Secondly (σ x +σ y )/2+ (1/2)( σ x -σ y ) 2 +4τ 2 ) 5 c. Thirdly (σ x +σ y )/2+ (1/2)( σ x +σ y ) 2 +4τ 2 ) 5 d. None

Last Answer : b. Secondly (σ x +σ y )/2+ (1/2)( σ x -σ y ) 2 +4τ 2 ) 5

Which is the maximum principal stress? a. Firstly σ 2 b. Secondly σ 3 c. Thirdly σ 1 d. None

Description : Which is the maximum principal stress? a. Firstly σ 2 b. Secondly σ 3 c. Thirdly σ 1 d. None

Last Answer : c. Thirdly σ 1

The order of magnitude of the principal stresses is a. Firstly σ 1 >σ 2 >σ 3 b. Secondly σ 2 >σ 3 >σ 1 c. Thirdly σ 1 >σ 3 >σ 2 d. None

Description : The order of magnitude of the principal stresses is a. Firstly σ 1 >σ 2 >σ 3 b. Secondly σ 2 >σ 3 >σ 1 c. Thirdly σ 1 >σ 3 >σ 2 d. None

Last Answer : a. Firstly σ 1 >σ 2 >σ 3

Under complex loading, if elastic limit reaches in tension, then failure occurs due to (a) Firstly Maximum principal strain theory (b) Secondly Maximum principal theory of strain energy (c) Thirdly Maximum Principal stress theory (d) None

Description : Under complex loading, if elastic limit reaches in tension, then failure occurs due to (a) Firstly Maximum principal strain theory (b) Secondly Maximum principal theory of strain energy (c) Thirdly Maximum Principal stress theory (d) None

Last Answer : (c) Thirdly Maximum Principal stress theory

Under complex loading, if elastic limit reaches in tension, then failure occurs due to (a) Firstly Maximum principal strain theory (b) Secondly Maximum principal theory of strain energy (c) Thirdly Maximum shear stress theory (d) None

Description : Under complex loading, if elastic limit reaches in tension, then failure occurs due to (a) Firstly Maximum principal strain theory (b) Secondly Maximum principal theory of strain energy (c) Thirdly Maximum shear stress theory (d) None

Last Answer : (d) None

In a ductile material, the strength are (a)Firstly Ultimate >yield > elastic limit (b) Secondly Ultimate > yield =elastic limit (c) Thirdly Ultimate=yield=elastic limit (d) None

Description : In a ductile material, the strength are (a)Firstly Ultimate >yield > elastic limit (b) Secondly Ultimate > yield =elastic limit (c) Thirdly Ultimate=yield=elastic limit (d) None

Last Answer : (a)Firstly Ultimate >yield > elastic limit

In a brittle material, the strength are (a) Firstly Ultimate >yield > elastic limit (b) Secondly Ultimate > yield =elastic limit (c) Thirdly Ultimate=yield=elastic limit (d) None

Description : In a brittle material, the strength are (a) Firstly Ultimate >yield > elastic limit (b) Secondly Ultimate > yield =elastic limit (c) Thirdly Ultimate=yield=elastic limit (d) None

Last Answer : (c) Thirdly Ultimate=yield=elastic limit

A ductile material may not meet a failure if it has been tested for the theories of failure (a) Firstly Maximum Principal Theory (b) Secondly Maximum Principal Strain Theory (c) Thirdly Maximum principal strain energy theory (d) None

Description : A ductile material may not meet a failure if it has been tested for the theories of failure (a) Firstly Maximum Principal Theory (b) Secondly Maximum Principal Strain Theory (c) Thirdly Maximum principal strain energy theory (d) None

Last Answer : (d) None

The principal strain due to σ1(tensile) and σ2 (Compressive ) stress is (a) Firstly (b)Secondly (c)Thirdly (d) None

Description : The principal strain due to σ1(tensile) and σ2 (Compressive ) stress is (a) Firstly (b)Secondly (c)Thirdly (d) None

Last Answer : (b)Secondly

Nature of the three principal stresses is a. Firstly All tensile b. Secondly All compressive c. Thirdly All shear d. None

Description : Nature of the three principal stresses is a. Firstly All tensile b. Secondly All compressive c. Thirdly All shear d. None

Last Answer : a. Firstly All tensile

Symbols for principal stresses are a. Firstly σ, τ & γ b. Secondly σ 1 , σ 2 & σ 3

Description : Symbols for principal stresses are a. Firstly σ, τ & γ b. Secondly σ 1 , σ 2 & σ 3

Last Answer : b. Secondly σ 1 , σ 2 & σ 3

In a body under pure shear, the magnitude and nature of the two principal stresses are a. Firstly Equals shear stress, opposite nature b. Secondly Equals shear stress, same nature c. Both (a) & (b) d. None

Description : In a body under pure shear, the magnitude and nature of the two principal stresses are a. Firstly Equals shear stress, opposite nature b. Secondly Equals shear stress, same nature c. Both (a) & (b) d. None

Last Answer : a. Firstly Equals shear stress, opposite nature

Theories of elastic failure establishes the (a) Firstly Reasons of failure (b) Secondly Reasons of safety (c) Both (a) & (b) (d) None

Description : Theories of elastic failure establishes the (a) Firstly Reasons of failure (b) Secondly Reasons of safety (c) Both (a) & (b) (d) None

Last Answer : (c) Both (a) & (b)

Theories of elastic failure is the (a) Firstly analysis of the various failures (b) Secondly analysis of the strength of a material (c) Both (a) & (b) (d) None

Description : Theories of elastic failure is the (a) Firstly analysis of the various failures (b) Secondly analysis of the strength of a material (c) Both (a) & (b) (d) None

Last Answer : (c) Both (a) & (b)

A ductile material may not meet a failure if it has been tested for the theories of failure (a) Firstly Maximum Shear Stress Theory (b) Secondly Maximum Shear Strain Energy Theory (c) Both (a) & (b) (d) None

Description : A ductile material may not meet a failure if it has been tested for the theories of failure (a) Firstly Maximum Shear Stress Theory (b) Secondly Maximum Shear Strain Energy Theory (c) Both (a) & (b) (d) None

Last Answer : (c) Both (a) & (b)

The angle of obliquity is the angle between the a. Firstly Resultant and the shear stress b. Secondly Resultant & the normal stress c. Both (a) & (b) d. None

Description : The angle of obliquity is the angle between the a. Firstly Resultant and the shear stress b. Secondly Resultant & the normal stress c. Both (a) & (b) d. None

Last Answer : b. Secondly Resultant & the normal stress

Principal stresses are a. Firstly Maximum and minimum shear stresses b. Secondly Maximum and minimum normal stresses c. Both (a) & (b) d. None

Description : Principal stresses are a. Firstly Maximum and minimum shear stresses b. Secondly Maximum and minimum normal stresses c. Both (a) & (b) d. None

Last Answer : b. Secondly Maximum and minimum normal stresses

For hydrostatic lubrication (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space (B) There should be external source like pump to supply lubricant under pressure (C) There should be elastic deformation of the parts in contact (D) There should be metal to metal contact

Description : For hydrostatic lubrication (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space (B) There should be external source like pump to ... be elastic deformation of the parts in contact (D) There should be metal to metal contact

Last Answer : (B) There should be external source like pump to supply lubricant under pressure

In hydrostatic bearings (A) The Oil film pressure is generated only by the rotation of the journal (B) The oil film is maintained by supplying oil under pressure (C) Do not require external supply of lubricant (D) Grease is used for lubrication

Description : In hydrostatic bearings (A) The Oil film pressure is generated only by the rotation of the journal (B) The oil film is maintained by supplying oil under pressure (C) Do not require external supply of lubricant (D) Grease is used for lubrication

Last Answer : (B) The oil film is maintained by supplying oil under pressure

Assertion (A): Hydrostatic lubrication is more advantageous when compared to hydrodynamic lubrication during starting and stopping the journal in its bearing. Reason (R): In hydrodynamic lubrication, the fluid film pressure is generated by the rotation of the journal. [IES-1998] (a) Both A and R are individually true and R is the correct explanation of A (b) Both A and R are individually true but R is not the correct explanation of A (c) A is true but R is false (d) A is false but R is true

Description : Assertion (A): Hydrostatic lubrication is more advantageous when compared to hydrodynamic lubrication during starting and stopping the journal in its bearing. Reason (R): In hydrodynamic lubrication, the fluid film pressure is ... (c) A is true but R is false (d) A is false but R is true

Last Answer : (b) Both A and R are individually true but R is not the correct explanation of A

The relationship between the alternating stress and mean stress is given by the following equation: σ a =σ e [1-(σ m /σ u )x], where σ e is the fatigue limit for completely reversed loading. The value of x for Gerber line is equal to _________ a) 1 b) 2 c) 0.5 d) -1

Description : The relationship between the alternating stress and mean stress is given by the following equation: σ a =σ e [1-(σ m /σ u )x], where σ e is the fatigue limit for completely reversed loading. The value of x for Gerber line is equal to _________ a) 1 b) 2 c) 0.5 d) -1

Last Answer : b) 2

The relationship between the alternating stress and mean stress is given by the following equation: σ a = σ e [1-(σ m /σ u ) x ]. The value of x for Goodman line is equal to _________ a) 1 b) 2 c) 0.5 d) -1

Description : The relationship between the alternating stress and mean stress is given by the following equation: σ a = σ e [1-(σ m /σ u ) x ]. The value of x for Goodman line is equal to _________ a) 1 b) 2 c) 0.5 d) -1

Last Answer : a) 1

Which of the following equations is correct for Soderberg Criteria? a. (σ m / S ut ) + (σ a / S e ) = (1 / N f ) b. (σ m / S ut ) - (σ a / S e ) = (1 / N f ) c. (σ m / S yt ) + (σ a / S e ) = (1 / N f ) d. (σ m / S ut ) - (σ a / S e ) = (1 / N f )

Description : Which of the following equations is correct for Soderberg Criteria? a. (σ m / S ut ) + (σ a / S e ) = (1 / N f ) b. (σ m / S ut ) - (σ a / S e ) = (1 / N f ) c. (σ m / S yt ) + (σ a / S e ) = (1 / N f ) d. (σ m / S ut ) - (σ a / S e ) = (1 / N f )

Last Answer : c. (σ m / S yt ) + (σ a / S e ) = (1 / N f )

Which of the following conditions is true for repeated stress? 1. σ m = 0 2. σ m = σ max / 2 3. σ m = σ a 4. σ min = 0 5. σ min = – σ max 6. σ a = σ max / 2 where σ m = mean stress and σ a = stress amplitude a. condition 2 and 3 b. condition 1, 3 and 5 c. condition 2, 4, and 6 d. condition 3,4, 5 and 6

Description : Which of the following conditions is true for repeated stress? 1. σ m = 0 2. σ m = σ max / 2 3. σ m = σ a 4. σ min = 0 5. σ min = - σ max 6. σ a = σ max / 2 where σ m = mean ... amplitude a. condition 2 and 3 b. condition 1, 3 and 5 c. condition 2, 4, and 6 d. condition 3,4, 5 and 6

Last Answer : c. condition 2, 4, and 6

The equations for principal stresses are valid only when (a)σ x and σ y are both tensile (b) σ x is compressive and σ y is tensile (c) σ x is tensile and σ y is compressive (d) None

Description : The equations for principal stresses are valid only when (a)σ x and σ y are both tensile (b) σ x is compressive and σ y is tensile (c) σ x is tensile and σ y is compressive (d) None

Last Answer : (a)σ x and σ y are both tensile

The magnitude of principal stresses due to complex stresses is (a) (1/2)[ (σ x + σ y ) ± ((σ x –σ y ) 2 + 4 τ 2 )) 0.5 ] (b) (1/2)[ (σx + σy) ± (1/2)((σx –σy) 2 + 4 τ 2 )) 0.5 ] (c) (1/2)[ (σx + σy) ± ((1/2)(σx –σy) 2 + 4 τ 2 )) 0.5 ]

Description : The magnitude of principal stresses due to complex stresses is (a) (1/2)[ (σ x + σ y ) ± ((σ x –σ y ) 2 + 4 τ 2 )) 0.5 ] (b) (1/2)[ (σx + σy) ± (1/2)((σx –σy) 2 + 4 τ 2 )) 0.5 ] (c) (1/2)[ (σx + σy) ± ((1/2)(σx –σy) 2 + 4 τ 2 )) 0.5 ]

Last Answer : (a) (1/2)[ (σ x + σ y ) ± ((σ x –σ y ) 2 + 4 τ 2 )) 0.5 ]

The maximum tangential stress σ t = (σ x sin 2θ)/2 is maximum if, θ is equal to ________ a. 45 o b. 90 o c. 270 o d. all of the above

Description : The maximum tangential stress σ t = (σ x sin 2θ)/2 is maximum if, θ is equal to ________ a. 45 o b. 90 o c. 270 o d. all of the above

Last Answer : a. 45 o

Which of the following formulae is used to calculate tangential stress, when a member is subjected to stress in mutually perpendicular axis and accompanied by a shear stress? a. [(σ x – σ y )/2 ]sin θ – τ cos 2θ b. [(σ x – σ y )/2 ]– τ cos 2θ c. [(σ x – σ y )/2 ]sin θ – τ 2 cos θ d. None of the above

Description : Which of the following formulae is used to calculate tangential stress, when a member is subjected to stress in mutually perpendicular axis and accompanied by a shear stress? a. [(σ x - σ y )/2 ]sin θ - τ cos 2θ b. [(σ x - ... τ cos 2θ c. [(σ x - σ y )/2 ]sin θ - τ 2 cos θ d. None of the above

Last Answer : c. [(σ x – σ y )/2 ]sin θ – τ 2 cos θ

The most suitable bearing for carrying very heavy loads with slow speed is (a) Hydrodynamic bearing (b) ball bearing [IAS 1994] (c) Roller bearing (d) hydrostatic bearing

Description : The most suitable bearing for carrying very heavy loads with slow speed is (a) Hydrodynamic bearing (b) ball bearing [IAS 1994] (c) Roller bearing (d) hydrostatic bearing

Last Answer : (d) hydrostatic bearing

Match List I with List II and select the : [IES-2002] List I (Bearings) List II (Load type) A. Hydrodynamic Journal bearing 1. High radial and thrust load combined B. Rectangular Hydrostatic bearing 2. Radial load only C. Taper Roller bearing 3. Thrust load only D. Angular contact ball bearing 4. Medium to low radial and thrust combined A B C D A B C D (a) 2 3 1 4 (b) 4 1 3 2 (c) 2 1 3 4 (d) 4 3 1 2

Description : Match List I with List II and select the : [IES-2002] List I (Bearings) List II (Load type) A. Hydrodynamic Journal bearing 1. High radial and thrust load combined B. Rectangular Hydrostatic bearing 2. Radial load only C. Taper Roller ... (a) 2 3 1 4 (b) 4 1 3 2 (c) 2 1 3 4 (d) 4 3 1 2

Last Answer : (a) 2 3 1 4

In hydrostatic bearing, (A) The axis of journal is eccentric with respect to axis of bearing (B) The axis of journal is concentric with respect to axis of bearing (C) The axis can be either eccentric or concentric depending upon speed (D) None of the above

Description : In hydrostatic bearing, (A) The axis of journal is eccentric with respect to axis of bearing (B) The axis of journal is concentric with respect to axis of bearing (C) The axis can be either eccentric or concentric depending upon speed (D) None of the above

Last Answer : (B) The axis of journal is concentric with respect to axis of bearing

Boundary lubricated bearing is (A) Thick film bearing (B) Thin film bearing (C) Hydrodynamic bearing (D) Hydrostatic bearing

Description : Boundary lubricated bearing is (A) Thick film bearing (B) Thin film bearing (C) Hydrodynamic bearing (D) Hydrostatic bearing

Last Answer : (B) Thin film bearing

If we exclude the cost factor, which bearing is preferred? a) Hydrostatic b) Hydrodynamic c) Both are equally preferred d) Cannot be determined

Description : If we exclude the cost factor, which bearing is preferred? a) Hydrostatic b) Hydrodynamic c) Both are equally preferred d) Cannot be determined

Last Answer : a) Hydrostatic

Hydrostatic and hydrodynamic lubrication are the same thing. a) True b) False

Description : Hydrostatic and hydrodynamic lubrication are the same thing. a) True b) False

Last Answer : b) False

Satisfactory hydrodynamic film in a journal bearing is formed when (a) Journal speed is low; unit pressure on the bearing is high and viscosity of lubricant used is low [IES-2006] (b) Journal speed is low; unit pressure on the bearing is low and viscosity of lubricant used is low (c) Journal speed is high; unit pressure on the bearing is high and viscosity of lubricant used is high (d) Appropriate combination of journal speed, unit pressure on bearing and lubricant viscosity exists resulting in low coefficient of friction

Description : Satisfactory hydrodynamic film in a journal bearing is formed when (a) Journal speed is low; unit pressure on the bearing is high and viscosity of lubricant used is low [IES-2006] ... journal speed, unit pressure on bearing and lubricant viscosity exists resulting in low coefficient of friction

Last Answer : (c) Journal speed is high; unit pressure on the bearing is high and viscosity of lubricant used is high

Why the input resistance of an ideal OPAMP is infinite and output resistance is zero? secondly, how can we measure these resistances(input and output) in case of an ideal OPAMPand Real OP-AMP in the following conditions when 1- load is not connected. 2- load is connected.

Description : Why the input resistance of an ideal OPAMP is infinite and output resistance is zero? secondly, how can we measure these resistances(input and output) in case of an ideal OPAMPand Real OP-AMP in the following conditions when 1- load is not connected. 2- load is connected.

Last Answer : Ans- Ideal OP-AMP is a power ful concept. If one goes through the history of amplifying devices it becomes clear that less it loads the previous stage better the output signal. ie ... . Can refer application notes by device manufacturer available in internet for more precise and practical solutions.

In which of the following case stress concentration factor is ignored? a) Ductile material under static load b) Ductile material under fluctuating load c) Brittle material under static load

Description : In which of the following case stress concentration factor is ignored? a) Ductile material under static load b) Ductile material under fluctuating load c) Brittle material under static load

Last Answer : a) Ductile material under static load

Which of the following statement(s) is/are true concerning water movement across cell membranes? a. Water moves only actively through cell membrane transport proteins b. For most cells of the body, the transmembrane hydrostatic pressure is 0 c. Water distribution is determined entirely by solute distribution d. Specialized cells such as the glomerulus of the kidney actively transport water to maintain hydrostatic pressure

Description : Which of the following statement(s) is/are true concerning water movement across cell membranes? a. Water moves only actively through cell membrane transport proteins b. For most cells of ... cells such as the glomerulus of the kidney actively transport water to maintain hydrostatic pressure

Last Answer : Answer: b, c The energetics of water transport across cell membranes is simplified by the fact that water moves only passively due to gradients of hydrostatic pressure or water ... water is distributed at equilibrium. Water distribution is determined entirely by solute to solute distribution

Consider the following statements: [IES 2007] For a journal rotating in a bearing under film lubrication conditions, the frictional resistance is- 1. Proportional to the area of contact 2. Proportional to the viscosity of lubricant 3. Proportional to the speed of rotation 4. Independent of the pressure Which of the statements given above are correct? (a) 1, 2, 3 and 4 (b) 1 and 4 only (c) 2, 3 and 4 only (d) 2 and 3 only

Description : Consider the following statements: [IES 2007] For a journal rotating in a bearing under film lubrication conditions, the frictional resistance is- 1. Proportional to the area of contact 2. Proportional to the viscosity of lubricant 3. ... 4 (b) 1 and 4 only (c) 2, 3 and 4 only (d) 2 and 3 only

Last Answer : (a) 1, 2, 3 and 4

For elasto-hydrodynamic lubrication (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space (B) There should be external source like pump to supply lubricant under pressure (C) There should be elastic deformation of the parts in contact (D) There should be metal to metal contact

Description : For elasto-hydrodynamic lubrication (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space (B) There should be external source like ... be elastic deformation of the parts in contact (D) There should be metal to metal contact

Last Answer : (C) There should be elastic deformation of the parts in contact

For hydrodynamic lubrication (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space (B) There should be external source like pump to supply lubricant under pressure (C) There should be elastic deformation of the parts in contact (D) There should be metal to metal contact

Description : For hydrodynamic lubrication (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space (B) There should be external source like pump to ... be elastic deformation of the parts in contact (D) There should be metal to metal contact

Last Answer : (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space

Starting friction is low in case of the __________ lubrication. (A) Boundary (B) Hydrodynamic (C) Hydrostatic (D) Mixed/semi-fluid

Description : Starting friction is low in case of the __________ lubrication. (A) Boundary (B) Hydrodynamic (C) Hydrostatic (D) Mixed/semi-fluid

Last Answer : (C) Hydrostatic

How many angles of obliquity are there for a cuboidal body under complex stresses? a. 6 b. 8 c. 4 d. None

Description : How many angles of obliquity are there for a cuboidal body under complex stresses? a. 6 b. 8 c. 4 d. None

Last Answer : a. 6

In case of solid disk flywheel, the mass (m) of disk is given by (A) πR 2 tρ (B) (π/2)R 2 tρ (C) 3πR 2 tρ (D) (3/2)πR 2 tρ

Description : In case of solid disk flywheel, the mass (m) of disk is given by (A) πR 2 tρ (B) (π/2)R 2 tρ (C) 3πR 2 tρ (D) (3/2)πR 2 tρ

Last Answer : (A) πR 2 tρ

In case of partial bearing, the angle of contact of the bushing with the journal is (A) 270° (B) More than 180° (C) Less than 180° (D) 360°

Description : In case of partial bearing, the angle of contact of the bushing with the journal is (A) 270° (B) More than 180° (C) Less than 180° (D) 360°

Last Answer : (C) Less than 180°