Molybdenum steels containing 0.15 to 0.40% molybdenum (A) Are prone to temper brittleness (B) Are used for automobile parts like gears, axle, shaft, bearings etc. (C) Have very poor fatigue resistance

Molybdenum steels containing 0.15 to 0.40% molybdenum
(A) Are prone to temper brittleness
(B) Are used for automobile parts like gears, axle, shaft, bearings etc.
(C) Have very poor fatigue resistance
by

1 Answer

Answer :

(B) Are used for automobile parts like gears, axle, shaft, bearings etc
by

Related questions

Chrome vanadium steels usually contain 0.8 to 1.1% Cr, 0.25 to 0.35% C and < 0.25% V. It is (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives (B) Having poor fatigue resistance (C) Having poor toughness (D) Not helpful in producing cleaner steel due to oxidising action of vanadium

Description : Chrome vanadium steels usually contain 0.8 to 1.1% Cr, 0.25 to 0.35% C and < 0.25% V. It is (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives (B) ... resistance (C) Having poor toughness (D) Not helpful in producing cleaner steel due to oxidising action of vanadium

Last Answer : (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives

Temper brittleness of a material can be fairly detected by the __________ test. (A) Fatigue (B) Notched bar impact (C) Tensile (D) Hardness

Description : Temper brittleness of a material can be fairly detected by the __________ test. (A) Fatigue (B) Notched bar impact (C) Tensile (D) Hardness

Last Answer : Option B

Sub zero treatment of steel is done to (A) Suppress martensite transformation (B) Enhance its working performance in sub zero atmosphere (C) Reduce the retained austenite in hardened steel (D) Induce temper brittleness after its hardening

Description : Sub zero treatment of steel is done to (A) Suppress martensite transformation (B) Enhance its working performance in sub zero atmosphere (C) Reduce the retained austenite in hardened steel (D) Induce temper brittleness after its hardening

Last Answer : Option C

Fine grained steels have (A) High brittleness (B) Higher tendency to distort (C) High ductility (D) None of these

Description : Fine grained steels have (A) High brittleness (B) Higher tendency to distort (C) High ductility (D) None of these

Last Answer : (C) High ductility

Ball bearings are used in cycles, scooters etc. to _____. A. Reduce the friction between the wheel and the axle B. Increase the friction between the wheel and the axle C. Reduce the friction between ground and the wheel D. None of these

Description : Ball bearings are used in cycles, scooters etc. to _____. A. Reduce the friction between the wheel and the axle B. Increase the friction between the wheel and the axle C. Reduce the friction between ground and the wheel D. None of these

Last Answer : ANSWER: A

What is temper embrittlement in alloy steels and what are its effects ?

Description : What is temper embrittlement in alloy steels and what are its effects ?

Last Answer : Embrittlement attack is usually intergranular in metals, i.e. cracks progress between the grains of the polycrystalline material. It imparts a tendency to fail under a static load after a given period of time in those alloy steels which are susceptible to embrittlement.

Which of the following alloy steels is the most suitable for making gun barrels and projectiles? (A) Tungsten steel (B) Molybdenum steel (C) Nickel-chrome steel (D) Cobalt steel

Description : Which of the following alloy steels is the most suitable for making gun barrels and projectiles? (A) Tungsten steel (B) Molybdenum steel (C) Nickel-chrome steel (D) Cobalt steel

Last Answer : (C) Nickel-chrome steel

Which of the following alloy steels has the energy saving properties making it suitable for use in electrical machines? (A) Silicon steel (B) Chromium steel (C) Molybdenum steel (D) None of these

Description : Which of the following alloy steels has the energy saving properties making it suitable for use in electrical machines? (A) Silicon steel (B) Chromium steel (C) Molybdenum steel (D) None of these

Last Answer : (A) Silicon steel

A material is capable of resisting softening at high temperature, because of its property termed as (A) Hot temper (B) Hot hardness (C) Fatigue (D) Creep

Description : A material is capable of resisting softening at high temperature, because of its property termed as (A) Hot temper (B) Hot hardness (C) Fatigue (D) Creep

Last Answer : (B) Hot hardness

Most important property of steels for use in automobile bodies is the (A) Formability (B) Yield strength (C) Toughness (D) Resilience

Description : Most important property of steels for use in automobile bodies is the (A) Formability (B) Yield strength (C) Toughness (D) Resilience

Last Answer : (A) Formability

Cast iron has very high (A) Compressive strength (B) Ductility (C) Shock resistance (D) Resistance to brittleness

Description : Cast iron has very high (A) Compressive strength (B) Ductility (C) Shock resistance (D) Resistance to brittleness

Last Answer : (A) Compressive strength

Silico-manganese steels (containing 0.7% Mn, 0.5% C and 2% Si) (A) Do not require heat treatment for any of its applications (B) Are used for leaf and coiled springs (C) Do not have good resilience properties (D) Is tempered at 850°C

Description : Silico-manganese steels (containing 0.7% Mn, 0.5% C and 2% Si) (A) Do not require heat treatment for any of its applications (B) Are used for leaf and coiled springs (C) Do not have good resilience properties (D) Is tempered at 850°C

Last Answer : (B) Are used for leaf and coiled springs

Front and rear wheel axle bearings may be washed and replaced once in a) four years b) three years c) two years d) one year

Description : Front and rear wheel axle bearings may be washed and replaced once in a) four years b) three years c) two years d) one year

Last Answer : d) one year

mmonium nitrate is (A) Having about 40% N2 (B) Not hygroscopic (C) Not prone to explosive thermal decomposition (D) Mixed with limestone powder to reduce its explosive nature before using it as a fertilizer

Description : mmonium nitrate is (A) Having about 40% N2 (B) Not hygroscopic (C) Not prone to explosive thermal decomposition (D) Mixed with limestone powder to reduce its explosive nature before using it as a fertilizer

Last Answer : (D) Mixed with limestone powder to reduce its explosive nature before using it as a fertilizer

The rolling contact bearings as compared to sliding contact bearings have (a) small overall dimensions (b) accuracy of shaft alignment (c) low starting and low running friction except at very high speeds (d) all the mentioned

Description : The rolling contact bearings as compared to sliding contact bearings have (a) small overall dimensions (b) accuracy of shaft alignment (c) low starting and low running friction except at very high speeds (d) all the mentioned

Last Answer : (d) all the mentioned

Steels with high carbon equivalent have poor Weldability, because in these steels during welding (A) Carbon and other alloying elements get oxidised from the weld pool (B) Excessive ferrite forms in the heat affected zone leading to poor toughness of the weld (C) Martensite forms in the heat affected zone leading to poor toughness/ductility of the weld (D) Segregation of carbon and other element occurs in the weld pool leading to poor properties of the weld

Description : Steels with high carbon equivalent have poor Weldability, because in these steels during welding (A) Carbon and other alloying elements get oxidised from the weld pool (B) Excessive ferrite forms in the ... of carbon and other element occurs in the weld pool leading to poor properties of the weld

Last Answer : (C) Martensite forms in the heat affected zone leading to poor toughness/ductility of the weld

Principal alloying elements of cast tool alloys which have very high wear resistance & high temperature strength are (A) Cobalt, chromium & tungsten (B) Cobalt, chromium & nickel (C) Molybdenum, tungsten & chromium (D) Cobalt, zirconium & molybdenum

Description : Principal alloying elements of cast tool alloys which have very high wear resistance & high temperature strength are (A) Cobalt, chromium & tungsten (B) Cobalt, chromium & nickel (C) Molybdenum, tungsten & chromium (D) Cobalt, zirconium & molybdenum

Last Answer : : Option A

______ is used for a shaft that supports rotating elements like wheels, drums or rope sleaves. a) Spindle b) Axle c) Shaf d) None of the listed

Description : ______ is used for a shaft that supports rotating elements like wheels, drums or rope sleaves. a) Spindle b) Axle c) Shaf d) None of the listed

Last Answer : a) Spindle

______ is used for a shaft that supports rotating elements like wheels, drums or rope sleaves. a) Spindle b) Axle c) Shaf d) None of the listed

Description : ______ is used for a shaft that supports rotating elements like wheels, drums or rope sleaves. a) Spindle b) Axle c) Shaf d) None of the listed

Last Answer : a) Spindle

______ is used for a shaft that supports rotating elements like wheels, drums or rope sleaves. a) Spindle b) Axle c) Shaf d) cylinder

Description : ______ is used for a shaft that supports rotating elements like wheels, drums or rope sleaves. a) Spindle b) Axle c) Shaf d) cylinder

Last Answer : a) Spindle

Maraging steels derive their strength from the following mechanism: (A) A fine, highly dislocated and strong martensite (B) Fine dispersions of inter-metallic of Fe, Ni, Ti etc (C) Fine dispersions of alloy carbides in a ferrite matrix (D) Fine dispersions of Fe3 C nucleated on dislocations in austenite

Description : Maraging steels derive their strength from the following mechanism: (A) A fine, highly dislocated and strong martensite (B) Fine dispersions of inter-metallic of Fe, Ni, Ti etc (C) Fine ... alloy carbides in a ferrite matrix (D) Fine dispersions of Fe3 C nucleated on dislocations in austenite

Last Answer : Option A

Which of the following is not designed under torsion equation? a. Spindle b. Axle c. Low cost shaft d. Shaft with variable diameter

Description : Which of the following is not designed under torsion equation? a. Spindle b. Axle c. Low cost shaft d. Shaft with variable diameter

Last Answer : b. Axle

The virtual hitch point of a directional implement is located at: a) Near the front axle b) 40 mm towards the rear axle c) At the power take off shaft d) Between two lower links

Description : The virtual hitch point of a directional implement is located at: a) Near the front axle b) 40 mm towards the rear axle c) At the power take off shaft d) Between two lower links

Last Answer : d) Between two lower links

The ability of a material to offer resistance to scratching or indentation is a measure of its (A) Brittleness (B) Toughness (C) Hardness (D) Resilience

Description : The ability of a material to offer resistance to scratching or indentation is a measure of its (A) Brittleness (B) Toughness (C) Hardness (D) Resilience

Last Answer : (C) Hardness

Higher percentage of ash in coal meant for the production of metallurgical grade coke (A) Decreases the hardness of coke (B) Decreases the abrasion resistance of coke (C) Causes brittleness in steel (D) None of these

Description : Higher percentage of ash in coal meant for the production of metallurgical grade coke (A) Decreases the hardness of coke (B) Decreases the abrasion resistance of coke (C) Causes brittleness in steel (D) None of these

Last Answer : (D) None of these

People who have migrated from the planes to an area adjoining Rohtang Pass about six months back (a) have more RBCs and their haemoglobin has a lower binding affinity to O2 (b) are not physically fit to play games like football (c) suffer from altitude sickness with symptoms like nausea, fatigue, etc. (d) have the usual RBC count but their haemoglobin has very high binding affinity to O2

Description : People who have migrated from the planes to an area adjoining Rohtang Pass about six months back (a) have more RBCs and their haemoglobin has a lower binding affinity to O2 (b) are not physically fit ... etc. (d) have the usual RBC count but their haemoglobin has very high binding affinity to O2

Last Answer : (a) have more RBCs and their haemoglobin has a lower binding affinity to O2

76. People who have migrated from the planes to an area adjoining Rohtang Pass about six months back (1) Have the usual RBC count but their haemoglobin has very high binding affinuty of O2 (2) Have more RBCs and their haemoglobin has a lower binding affinity of O2 (3) Are not physically fit to play games like football (4) Suffer from altitude sickness with symptoms like nausea, fatigue, etc

Description : 76. People who have migrated from the planes to an area adjoining Rohtang Pass about six months back (1) Have the usual RBC count but their haemoglobin has very high binding affinuty of O2 (2 ... to play games like football (4) Suffer from altitude sickness with symptoms like nausea, fatigue, etc

Last Answer : Have more RBCs and their haemoglobin has a lower binding affinity of O2

The bearings of medium series have capacity __________ over the light series. (a) 10 to 20% (b) 20 to 30% (c) 30 to 40% (d) 40 to 50%

Description : The bearings of medium series have capacity __________ over the light series. (a) 10 to 20% (b) 20 to 30% (c) 30 to 40% (d) 40 to 50%

Last Answer : (c) 30 to 40%

The bearings of heavy series have capacity __________ over the medium series. (a) 10 to 20% (b) 20 to 30% (c) 30 to 40% (d) 40 to 50%

Description : The bearings of heavy series have capacity __________ over the medium series. (a) 10 to 20% (b) 20 to 30% (c) 30 to 40% (d) 40 to 50%

Last Answer : (b) 20 to 30%

An isothermal aqueous phase reversible reaction, P ⇌ R, is to be carried out in a mixed flow reactor. The reaction rate in k.mole/m3 .h is given by, r = 0.5CP - 0.125CR. A stream containing only P enters the reactor. The residence time required (in hours) for 40% conversion of P is (A) 0.80 (B) 1.33 (C) 1.60 (D) 2.67

Description : An isothermal aqueous phase reversible reaction, P ⇌ R, is to be carried out in a mixed flow reactor. The reaction rate in k.mole/m3 .h is given by, r = 0.5CP - 0.125CR. A stream containing only P enters the reactor. The ... (in hours) for 40% conversion of P is (A) 0.80 (B) 1.33 (C) 1.60 (D) 2.67

Last Answer : (C) 1.60

Dead mild steel, which contains 0.10 to 0.15 percent carbon is used for making (A) Shafts (B) Flanges (C) Gears (D) Shear blades

Description : Dead mild steel, which contains 0.10 to 0.15 percent carbon is used for making (A) Shafts (B) Flanges (C) Gears (D) Shear blades

Last Answer : (B) Flanges

High ash containing coke (A) Produces more slag when used in the blast(B) Has poor strength and abrasion resistance(C) Is desirable in producer gas manufacture(D) None of these furnace

Description : High ash containing coke (A) Produces more slag when used in the blast furnace (B) Has poor strength and abrasion resistance (C) Is desirable in producer gas manufacture (D) None of these

Last Answer : (A) Produces more slag when used in the blast furnace

A molybdenum containing oxidase is (A) Cytochrome oxidase (B) Xanthine oxidase (C) Glucose oxidase (D) L-Amino acid oxidase

Description : A molybdenum containing oxidase is (A) Cytochrome oxidase (B) Xanthine oxidase (C) Glucose oxidase (D) L-Amino acid oxidase

Last Answer : Answer : B

Shock resisting steels should possess high (A) Hardness (B) Toughness (C) Tensile strength (D) Wear resistance

Description : Shock resisting steels should possess high (A) Hardness (B) Toughness (C) Tensile strength (D) Wear resistance

Last Answer : (B) Toughness

Ferric stainless steels compared to austenitic stainless steels (A) Have lower corrosion resistance (B) Are harder to fabricate (C) Are less ductile and hence less suitable for cold pressing (D) All (A), (B) and (C)

Description : Ferric stainless steels compared to austenitic stainless steels (A) Have lower corrosion resistance (B) Are harder to fabricate (C) Are less ductile and hence less suitable for cold pressing (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following is NOT a physical property of crystalline boron? w) brown color x) diamond hardness y) brittleness z) high electrical resistance

Description : Which of the following is NOT a physical property of crystalline boron? w) brown color x) diamond hardness y) brittleness z) high electrical resistance 

Last Answer : ANSWER: W -- BROWN COLOR (Crystalline boron is transparent.) 

To protect the rotor of a motor disassembled for maintenance or overhaul, it should be ___________________. A. suspended by wire slings in one corner of the shop B. stowed upright on its shaft C. supported by two 'V' notched wood blocks D. returned to the frame as soon as the bearings are removed

Description : To protect the rotor of a motor disassembled for maintenance or overhaul, it should be ___________________. A. suspended by wire slings in one corner of the shop B. stowed upright on its shaft C. supported by two 'V' notched wood blocks D. returned to the frame as soon as the bearings are removed

Last Answer : Answer: C

On electrical generators one of the bearings is isolated from the bedplate. This insulating block should not be painted and must be kept clean to ___________. A. protect operating personnel from shock B. create an isolated ground for the instrumentation C. allow for the expansion of the generator away from the prime mover as it warms up D. eliminate shaft currents to prevent damaging the bearings

Description : On electrical generators one of the bearings is isolated from the bedplate. This insulating block should not be painted and must be kept clean to ___________. A. protect operating personnel from shock ... the prime mover as it warms up D. eliminate shaft currents to prevent damaging the bearings

Last Answer : Answer: D

The reactive power drawn by a motor from an AC generator is the power which is _____________. A. used to establish the magnetic field of the motor B. lost in overcoming friction in the bearings C. strictly converted to heat generated by current flow through the windings D. transmitted directly through the rotor shaft to perform useful work

Description : The reactive power drawn by a motor from an AC generator is the power which is _____________. A. used to establish the magnetic field of the motor B. lost in overcoming friction in the ... by current flow through the windings D. transmitted directly through the rotor shaft to perform useful work

Last Answer : Answer: A

One of the generator or motor bearings is generally insulated from the end housing in order to prevent ________. A. rapid brush wear B. current leakage from the shaft C. excessive field winding heat D. circulation of shaft currents induced in the machine's frame

Description : One of the generator or motor bearings is generally insulated from the end housing in order to prevent ________. A. rapid brush wear B. current leakage from the shaft C. excessive field winding heat D. circulation of shaft currents induced in the machine's frame

Last Answer : Answer: D

When removing ball or roller bearings from the shaft of a motor, you should use a _____________. A. rawhide hammer B. brass mallet C. wheel puller D. soft iron pry bar

Description : When removing ball or roller bearings from the shaft of a motor, you should use a _____________. A. rawhide hammer B. brass mallet C. wheel puller D. soft iron pry bar

Last Answer : Answer: C

The ball bearing is subjected to a radial load of 4000 N. Expected life for 90% bearings is 9000 hr and the shaft is rot (a) 42.21 kN (b) 37.29 kN (c) 26.33 kN (d) 35.22 kN

Description : The ball bearing is subjected to a radial load of 4000 N. Expected life for 90% bearings is 9000 hr and the shaft is rot (a) 42.21 kN (b) 37.29 kN (c) 26.33 kN (d) 35.22 kN

Last Answer : (b) 37.29 kN

Calculate the bearing life if expected life for 90% bearings is 9000 hr and the shaft is rotating at 1500 rpm. (a) 850 million rev (b) 810 million rev (c) 810 hr (d) 850 hr

Description : Calculate the bearing life if expected life for 90% bearings is 9000 hr and the shaft is rotating at 1500 rpm. (a) 850 million rev (b) 810 million rev (c) 810 hr (d) 850 hr

Last Answer : (b) 810 million rev

Consider the following pairs of types of bearings and applications: 1. Partial Journal bearing................... Rail wagon axles 2. Full journal bearing ......................Diesel engine crank-shaft 3. Radial bearing ............................Combined radial and axial loads Which of these pairs is/are correctly matched? [IES-2000] (a) 1 alone (b) 1 and 2 (c) 2 and 3 (d) 1, 2 and 3

Description : Consider the following pairs of types of bearings and applications: 1. Partial Journal bearing................... Rail wagon axles 2. Full journal bearing ......................Diesel engine crank-shaft 3. Radial bearing ... matched? [IES-2000] (a) 1 alone (b) 1 and 2 (c) 2 and 3 (d) 1, 2 and 3

Last Answer : (b) 1 and 2

Which of the following are functions of bearings? a) Ensure free rotation of shaft with minimum friction b) Holding shaft in a correct position c) Transmit the force of the shaft to the frame d) All of the listed

Description : Which of the following are functions of bearings? a) Ensure free rotation of shaft with minimum friction b) Holding shaft in a correct position c) Transmit the force of the shaft to the frame d) All of the listed

Last Answer : d) All of the listed

Rotor shaft of a large electric motor supported between short bearings at both ends shows a deflection of 1.8 mm in middle of motor. Assuming rotor to be perfectly balanced and supported at knife edges at both ends, likely critical speed (rpm) of shaft isA 350 B 4430 C 705 D 2810

Description : Rotor shaft of a large electric motor supported between short bearings at both ends shows a deflection of 1.8 mm in middle of motor. Assuming rotor to be perfectly balanced and supported at knife edges at both ends, likely critical speed (rpm) of shaft isA 350 B 4430 C 705 D 2810

Last Answer : C 705

Which of the following has a very high carbide forming tendency in steels? (A) Silicon (B) Chromium (C) Nickel (D) Vanadium

Description : Which of the following has a very high carbide forming tendency in steels? (A) Silicon (B) Chromium (C) Nickel (D) Vanadium

Last Answer : (D) Vanadium

Coarse grained steels have (A) Low toughness (B) No tendency to distort (C) High density (D) Very high toughness

Description : Coarse grained steels have (A) Low toughness (B) No tendency to distort (C) High density (D) Very high toughness

Last Answer : (B) No tendency to distort

Identify the false statement (A) Martensitic steels are less susceptible to pitting corrosion than austenitic steels (B) Pitting corrosion is usually very localised (C) Hydrogen embrittlement is facilitated by tensile stress (D) Stress corrosion cracking is facilitated by tensile stress

Description : Identify the false statement (A) Martensitic steels are less susceptible to pitting corrosion than austenitic steels (B) Pitting corrosion is usually very localised (C) Hydrogen embrittlement is facilitated by tensile stress (D) Stress corrosion cracking is facilitated by tensile stress

Last Answer : (A) Martensitic steels are less susceptible to pitting corrosion than austenitic steels