105° in radians is equal to A. 2 rad B. 3 rad C. 1.83 rad D. 4.5 rad

105° in radians is equal to

A. 2 rad

B. 3 rad

C. 1.83 rad

D. 4.5 rad
by

1 Answer

Answer :

1.83 rad


by

Related questions

ABCD is a rectangular plot of land. If the bearing of the side AB is 75°, the bearing of DC is (A) 75° (B) 255° (C) 105° (D) 285°

Description : ABCD is a rectangular plot of land. If the bearing of the side AB is 75°, the bearing of DC is  (A) 75°  (B) 255°  (C) 105°  (D) 285° 

Last Answer : (A) 75° 

Water content of a soil sample is the difference of the weight of the given sample at the given temperature and the weight determined after drying it for 24 hours at temperature ranging from (A) 80° to 90°C (B) 90° to 95°C (C) 103° to 105°C (D) 105° to 110°C

Description : Water content of a soil sample is the difference of the weight of the given sample at the given temperature and the weight determined after drying it for 24 hours at temperature ranging from (A) 80° to 90°C (B) 90° to 95°C (C) 103° to 105°C (D) 105° to 110°C

Last Answer : (D) 105° to 110°C

1 rad is equal to A. 57.3° B. 54° C. 45° D. 90°

Description : 1 rad is equal to A. 57.3° B. 54° C. 45° D. 90°

Last Answer : 57.3°

For the minute hand of the clock, the angular velocity is equal to A. 2 rad s-1 B. 3 rad s-1 C. 1 rad s-1 D. 0.00175 rad s-1

Description : For the minute hand of the clock, the angular velocity is equal to A. 2 rad s-1 B. 3 rad s-1 C. 1 rad s-1 D. 0.00175 rad s-1

Last Answer : 0.00175 rad s-1

180° is equal to A. 2π rad B. π rad C. π⁄2 rad D. π⁄4 rad

Description : 180° is equal to A. 2π rad B. π rad C. π⁄2 rad D. π⁄4 rad

Last Answer :  π rad

A wavelength is commonly measured in which one of the following units? w) radians x) angstroms y) electron volts z) seconds

Description : A wavelength is commonly measured in which one of the following units? w) radians x) angstroms y) electron volts z) seconds

Last Answer : ANSWER: X -- ANGSTROMS

The driveshaft of a car rotates at 450 radians per second with a torque of 150 Newton-meters. How much power is produced?

Description : The driveshaft of a car rotates at 450 radians per second with a torque of 150 Newton-meters. How much power is produced? 

Last Answer : ANSWER: 67,500 WATTS

Angular velocity of second hand of clock is 0.105 rad s-1 and length of hand is 1.8 cm, then speed of tip of hand is A. 0.189 cm s-1 B. 1 cm s-1 C. 0.189 m s-1 D. 2 m s-1

Description : Angular velocity of second hand of clock is 0.105 rad s-1 and length of hand is 1.8 cm, then speed of tip of hand is A. 0.189 cm s-1 B. 1 cm s-1 C. 0.189 m s-1 D. 2 m s-1

Last Answer : 0.189 cm s-1

Calculate damped natural frequency, if a spring mass damper system is subjected to periodic disturbing force of 30 N. Damping coefficient is equal to 0.76 times of critical damping coefficient and undamped natural frequency is 5 rad/sec A. 3.99 rad/sec B. 2.13 rad/sec C. 4.12 rad/sec D. 3.24 rad/sec

Description : Calculate damped natural frequency, if a spring mass damper system is subjected to periodic disturbing force of 30 N. Damping coefficient is equal to 0.76 times of critical damping coefficient and undamped natural frequency is 5 rad/sec A. 3.99 rad/sec B. 2.13 rad/sec C. 4.12 rad/sec D. 3.24 rad/sec

Last Answer : D. 3.24 rad/sec

A couple applied to a flywheel of mass 5 kg and of radius of gyration 20 cm produces an angular acceleration of 4 radians/sec2. The torque applied in dyne cm is a.8 x 104 b.8 x 106 c.8 x 107 d.8 x 108 e.8 x 1010

Description : A couple applied to a flywheel of mass 5 kg and of radius of gyration 20 cm produces an angular acceleration of 4 radians/sec2. The torque applied in dyne cm is a.8 x 104 b.8 x 106 c.8 x 107 d.8 x 108 e.8 x 1010

Last Answer : b. 8 x 106

What is the phase coefficient in radians per unit length of a transmission line at the frequency of 10 MHz if the velocity of propagation is 2.5x108 m/s? A. 0.25 B. 2.5 C. 0.35 D. 3.5

Description : What is the phase coefficient in radians per unit length of a transmission line at the frequency of 10 MHz if the velocity of propagation is 2.5x108 m/s? A. 0.25 B. 2.5 C. 0.35 D. 3.5

Last Answer : A. 0.25

What is 180 degrees equivalent to in radians?

Description : What is 180 degrees equivalent to in radians?

Last Answer : Feel Free to Answer

How many radians is 60 degrees?

Description : How many radians is 60 degrees?

Last Answer : Need answer

Solid angle subtended by the finite surface at the radiating element is (A) Called the view factor (B) Called the angle of vision (C) Proportional to the square of the distance between surfaces (D) Expressed in terms of radians

Description : Solid angle subtended by the finite surface at the radiating element is (A) Called the view factor (B) Called the angle of vision (C) Proportional to the square of the distance between surfaces (D) Expressed in terms of radians

Last Answer : (B) Called the angle of vision

Critical speed is expressed as A rotation of shaft in degrees B rotation of shaft in radians C rotation of shaft in minutes D natural frequency of the shaft

Description : Critical speed is expressed as A rotation of shaft in degrees B rotation of shaft in radians C rotation of shaft in minutes D natural frequency of the shaft

Last Answer : D natural frequency of the shaft

Critical speed is expressed as a) rotation of shaft in degrees b) rotation of shaft in radians c) rotation of shaft in minutes d) natural frequency of the shaft

Description : Critical speed is expressed as a) rotation of shaft in degrees b) rotation of shaft in radians c) rotation of shaft in minutes d) natural frequency of the shaft

Last Answer : d) natural frequency of the shaft

Critical speed is expressed as ______. A) rotation of the shaft in degrees (B) rotation of the shaft in radians (C) rotation of the shaft in minutes (D) the natural frequency of the shaf

Description : Critical speed is expressed as ______. A) rotation of the shaft in degrees (B) rotation of the shaft in radians (C) rotation of the shaft in minutes (D) the natural frequency of the shaf

Last Answer : (D) the natural frequency of the shaft

Critical speed is expressed as a) rotation of shaft in degrees b) rotation of shaft in radians c) rotation of shaft in minutes d) natural frequency of the shaft

Description : Critical speed is expressed as a) rotation of shaft in degrees b) rotation of shaft in radians c) rotation of shaft in minutes d) natural frequency of the shaft

Last Answer : d) natural frequency of the shaft

If a solid shaft (diameter 20 cm, length 400 cm, N = 0.8 × 105 N/mm2 ) when subjected to a twisting moment, produces maximum shear stress of 50 N/mm2 , the angle of twist in radians, is (A) 0.001 (B) 0.002 (C) 0.0025 (D) 0.003

Description : If a solid shaft (diameter 20 cm, length 400 cm, N = 0.8 × 105  N/mm2 ) when subjected to a twisting  moment, produces maximum shear stress of 50 N/mm2 , the angle of twist in radians, is  (A) 0.001  (B) 0.002  (C) 0.0025  (D) 0.003 

Last Answer : (C) 0.0025 

A wavelength is commonly measured in which one of the following units? A. Radians B. Angstroms C. Electron volts D. Seconds

Description : A wavelength is commonly measured in which one of the following units? A. Radians B. Angstroms C. Electron volts D. Seconds

Last Answer : B. Angstroms

In a 4-pole wave winding connected dc motor, the cross-magnetizing AT/pole for a brush shift of θ radians

Description : In a 4-pole wave winding connected dc motor, the cross-magnetizing AT/pole for a brush shift of θ radians (A) Armature amp-conductors × (θ/360o) (B) Armature amp-turns × (θ/360o) (C) Armature amp-conductors × (1/4 - θ/360o) (D) Armature amp-conductors × (1/8 - θ/360o)

Last Answer : In a 4-pole wave winding connected dc motor, the cross-magnetizing AT/pole for a brush shift of θ radians Armature amp-conductors × (1/8 - θ/360o)

Equal volumes of two monoatomic gases, A and B, at same temperature and pressure are mixed. The ratio of specific heats (Cp /Cv ) of the mixture will be (1) 1.67 (2) 0.83 (3) 1.50 (4) 3.3

Description : Equal volumes of two monoatomic gases, A and B, at same temperature and pressure are mixed. The ratio of specific heats (Cp /Cv ) of the mixture will be (1) 1.67 (2) 0.83 (3) 1.50 (4) 3.3

Last Answer : (1) 1.67

The two sides of a tringle are increasing at the rate of 1/2 ft/sec with their included angle decreasing at the rate of π/90 rad/sec. What is the rate of change of area when the sides and the included angle are respectively 5 ft,8 ft, and 60°?

Description : The two sides of a tringle are increasing at the rate of 1/2 ft/sec with their included angle decreasing at the rate of π/90 rad/sec. What is the rate of change of area when the sides and the included angle are respectively 5 ft,8 ft, and 60°?

Last Answer : Area = (L1 L2) sin(angle) , where L1, L2 and and angle are functions of time t. Take the derivative using the multiplication rule. The derivative will equal (L1L2)(derivative of sin) + sin times ... will have to use the multiplication rule a second time to get the derivative of L1 L2. Good luck.

A 2 m long shaft rotates about one end at 20 rad/s. It begins to accelerate with ? = 10 rads/s2. After how long, in seconds, will the velocity of the free end reach 100 m/s? a.3 b.107 dynes c.5 d.6 e.7

Description : A 2 m long shaft rotates about one end at 20 rad/s. It begins to accelerate with ? = 10 rads/s2. After how long, in seconds, will the velocity of the free end reach 100 m/s? a.3 b.107 dynes c.5 d.6 e.7

Last Answer : a. 3

Calculate coefficient of viscous damper, if the system is critically damped. Consider the following data: 1. Mass of spring mass damper system = 350 kg 2. Static deflection = 2 x 10 –3 m 3. Natural frequency of the system = 60 rad/sec A. 100.5 x 10 3 N-s/m B. 80 x 10 3 N-s/m C. 42 x 10 3 N-s/m D. None of the above

Description : Calculate coefficient of viscous damper, if the system is critically damped. Consider the following data: 1. Mass of spring mass damper system = 350 kg 2. Static deflection = 2 x 10 -3 m 3. Natural frequency of the system = 60 rad/sec ... /m B. 80 x 10 3 N-s/m C. 42 x 10 3 N-s/m D. None of the above

Last Answer : C. 42 x 10 3 N-s/m

Calculate coefficient of viscous damper, if the system is critically damped. Consider the following data: 1. Mass of spring mass damper system = 350 kg 2. Static deflection = 2 x 10 –3 m 3. Natural frequency of the system = 60 rad/sec a. 100.5 x 10 3 N-s/m b. 80 x 10 3 N-s/m c. 42 x 10 3 N-s/m d. None of the above

Description : Calculate coefficient of viscous damper, if the system is critically damped. Consider the following data: 1. Mass of spring mass damper system = 350 kg 2. Static deflection = 2 x 10 -3 m 3. Natural frequency of the system = 60 rad/sec ... /m b. 80 x 10 3 N-s/m c. 42 x 10 3 N-s/m d. None of the above

Last Answer : c. 42 x 10 3 N-s/m

Calculate the velocity of wave propagation in a conductor with frequency 5 x 10 8 rad/s and phase constant of 3 x 10 8 units. a) 3/5 b) 15 c) 5/3 d) 8

Description : Calculate the velocity of wave propagation in a conductor with frequency 5 x 10 8 rad/s and phase constant of 3 x 10 8 units. a) 3/5 b) 15 c) 5/3 d) 8

Last Answer : c) 5/3

Calculate the velocity of a wave with frequency 2 x10 9 rad/s and phase constant of 4 x 10 8 units. a) 0.5 b) 5 c) 0.2 d) 2

Description : Calculate the velocity of a wave with frequency 2 x10 9 rad/s and phase constant of 4 x 10 8 units. a) 0.5 b) 5 c) 0.2 d) 2

Last Answer : b) 5

Calculate the phase constant of a wave with frequency 12 rad/s and velocity 3×10 8 m/s(in 10 -8 order) a) 0.5 b) 72 c) 4 d) 3

Description : Calculate the phase constant of a wave with frequency 12 rad/s and velocity 3×10 8 m/s(in 10 -8 order) a) 0.5 b) 72 c) 4 d) 3

Last Answer : c) 4

The angular acceleration of a flywheel decreases uniformly from 8 rad/sec2 to 2 rad sec2 in 6 sec at which time its angular velocity is 42 rad/sec. The initial angular velocity was a.12 rad/sec b.24 rad/sec c.30 rad/sec d.3 rad/sec e.6 rad/sec

Description : The angular acceleration of a flywheel decreases uniformly from 8 rad/sec2 to 2 rad sec2 in 6 sec at which time its angular velocity is 42 rad/sec. The initial angular velocity was a.12 rad/sec b.24 rad/sec c.30 rad/sec d.3 rad/sec e.6 rad/sec

Last Answer : a. 12 rad/sec

A wheel 8 mts in diameter coasts to rest from a speed of 800 rpm in 10 minutes. Its angular deceleration is a.308/min2 b.683 rad/min2 c.502 rad/min2 d.107 dynes e.809 rad/min2

Description : A wheel 8 mts in diameter coasts to rest from a speed of 800 rpm in 10 minutes. Its angular deceleration is a.308/min2 b.683 rad/min2 c.502 rad/min2 d.107 dynes e.809 rad/min2

Last Answer : c. 502 rad/min2

The number of revolutions through which a pulley will rotate from rest if its angular acceleration is increased uniformly from zero to 12 rad per sec2 during 4 sec and then uniformly decreased to 0 rad per sec2 during the next 3 sec would be a.46.4 b.26.74 c.11.6 d.3.2 e.17.7

Description : The number of revolutions through which a pulley will rotate from rest if its angular acceleration is increased uniformly from zero to 12 rad per sec2 during 4 sec and then uniformly decreased to 0 rad per sec2 during the next 3 sec would be a.46.4 b.26.74 c.11.6 d.3.2 e.17.7

Last Answer : b. 26.74

A grinding wheel is rotating at 3000 rpm. When the switch is turned off the wheel stops in 10 seconds. The uniform deceleration of the wheel was a.1 rad/s2 b.31.4 rad/s2 c.4 rad/s2 d.62.8 rad/s2 e.10.4 rad/s2

Description : A grinding wheel is rotating at 3000 rpm. When the switch is turned off the wheel stops in 10 seconds. The uniform deceleration of the wheel was a.1 rad/s2 b.31.4 rad/s2 c.4 rad/s2 d.62.8 rad/s2 e.10.4 rad/s2

Last Answer : b. 31.4 rad/s2

A flywheel weighs 400 kg and has a radius of gyration of 30 cm about its axis of rotation. It is mounted on a shaft subjected to a moment of 40 kgm. If the flywheel starts from restits speed after 3 seconds wil be a.10.9 rad/sec b.19.0 rad/sec c.51.2 rad/sec d.3.33 rad/sec e.16.35 rad/sec

Description : A flywheel weighs 400 kg and has a radius of gyration of 30 cm about its axis of rotation. It is mounted on a shaft subjected to a moment of 40 kgm. If the flywheel starts from restits speed after 3 seconds wil be a.10.9 rad/sec b.19.0 rad/sec c.51.2 rad/sec d.3.33 rad/sec e.16.35 rad/sec

Last Answer : d. 3.33 rad/sec

A wheel accelerates from rest with an acceleration of 6 rad/sec2. How many revolutions are experienced in 4 seconds? a.12.36 b.25.6 c.9.82 d.107 dynes e.7.64

Description : A wheel accelerates from rest with an acceleration of 6 rad/sec2. How many revolutions are experienced in 4 seconds? a.12.36 b.25.6 c.9.82 d.107 dynes e.7.64

Last Answer : e. 7.64

Can a sermon be given in the mother tongue ? Assalamu Alaikum .. My point is to ask. Is it permissible to give Jumu'ah khutbah in mother tongue ? One brother said that according to Imam Abu Hanifa, it would be permissible to give. He presented the document (Rad al-Muhtar , 1/543) Is it saheeh or not ? If it is not correct then you will be obliged to give the correct information in detail.

Description : Can a sermon be given in the mother tongue ? Assalamu Alaikum .. My point is to ask. Is it permissible to give Jumu'ah khutbah in mother tongue ? One brother said that according to Imam Abu Hanifa, ... or not ? If it is not correct then you will be obliged to give the correct information in detail.

Last Answer : Walaikumus Salam Orahmatullah. Before answering this question, I am referring to a problem. Suppose , then , that some English-speaking , some Urdu-speaking , some Persian-speaking , some Arabic-speaking and ... . Then you will see that their document is the desire of the mind and not the document.

What is the name-meaning Rad Shahamat ?

Last Answer : The name Rad Shahamat means lightning adventure.

What is the name-meaning Rad ?

Last Answer : The name Rad means buzz

Two progressive transverse waves are described by : `y_(1) = 3.0 cm sin [(4x-700t)rad]` and `y_(2) = 3.0 cm sin [(4x-700t - pi//3) rad]`.

Description : Two progressive transverse waves are described by : `y_(1) = 3.0 cm sin [(4x-700t)rad]` and `y_(2) = 3.0 cm sin [(4x-700t - pi//3) rad]`.

Last Answer : Two progressive transverse waves are described by : `y_(1) = 3.0 cm sin [(4x-700t)rad]` and ... wave D. The particle will be oscillating in xy-plane.

Where other than Saint Catherines could a graduate from a two year program go to audit classes to be able to take the rad boards again?

Description : Where other than Saint Catherines could a graduate from a two year program go to audit classes to be able to take the rad boards again?

Last Answer : You can locate program at this site http://www.rad-systems.com/programs.html

A flywheel connected to a punching machine has to supply energy of 400 Nm while running at a mean angular speed of 20 rad/s. If the total fluctuation of speed is not exceed to in kgm 2 is 1. 25 2. 50 3. 100 4. 125

Description : A flywheel connected to a punching machine has to supply energy of 400 Nm while running at a mean angular speed of 20 rad/s. If the total fluctuation of speed is not exceed to in kgm 2 is 1. 25 2. 50 3. 100 4. 125

Last Answer : 1. 25

The static deflection of a spring under gravity, when a mass of 1 kg is suspended from it, is 1 mm. Assume the acceleration due to gravity g = 10 m/s^2. The natural frequency of this spring-mass system (in rad/s) is A 100 B 150 C 200 D 250

Description : The static deflection of a spring under gravity, when a mass of 1 kg is suspended from it, is 1 mm. Assume the acceleration due to gravity g = 10 m/s^2. The natural frequency of this spring-mass system (in rad/s) is A 100 B 150 C 200 D 250

Last Answer : A 100

Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. A 25.62 rad/sec B 20.78 rad/sec C 14.4 rad/sec D 15.33 rad/sec

Description : Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. A 25.62 rad/sec B 20.78 rad/sec C 14.4 rad/sec D 15.33 rad/sec

Last Answer : A 25.62 rad/sec

Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. A 21 rad/sec B 25.62 rad/sec C 20.22 Hz D 3.15 Hz

Description : Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. A 21 rad/sec B 25.62 rad/sec C 20.22 Hz D 3.15 Hz

Last Answer : B 25.62 rad/sec

A 1 kg mass is suspended by a spring having a stiffness of 0.4 N/mm. Determine the natural frequency. A 20 rad/sec B 30 rad/sec C 20 Hz D 30 Hz

Description : A 1 kg mass is suspended by a spring having a stiffness of 0.4 N/mm. Determine the natural frequency. A 20 rad/sec B 30 rad/sec C 20 Hz D 30 Hz

Last Answer : B 30 rad/sec

A spring mass system has time period of oscillation of 0.25 sec. What will be the natural frequency of the system? A 1 Hz B 2 rad sec C 4 rad/sec D 4 Hz

Description : A spring mass system has time period of oscillation of 0.25 sec. What will be the natural frequency of the system? A 1 Hz B 2 rad sec C 4 rad/sec D 4 Hz

Last Answer : D 4 Hz

Determine natural frequency of a system, which has equivalent spring stiffness of 43200 N/m and mass of 12 kg. A 40.22 rad/sec B 40 Hz C 60 Hz D 60 rad/sec

Description : Determine natural frequency of a system, which has equivalent spring stiffness of 43200 N/m and mass of 12 kg. A 40.22 rad/sec B 40 Hz C 60 Hz D 60 rad/sec

Last Answer : D 60 rad/sec

In a 2-mass 3 spring vibrating system the two masses each are of 9.8 kg coupling spring is having a stiffness of 3430 N/m whereas the other two springs have each a stiffness of 8820 N/m. The two natural frequencies in rad /sec are A) 10 & 20 B) 20 & 30 C) 30 & 40D) 40 & 50

Description : In a 2-mass 3 spring vibrating system the two masses each are of 9.8 kg coupling spring is having a stiffness of 3430 N/m whereas the other two springs have each a stiffness of 8820 N/m. The two natural frequencies in rad /sec are A) 10 & 20 B) 20 & 30 C) 30 & 40D) 40 & 50

Last Answer : C) 30 & 40

A rotary system has a damping coefficient of 40 N-m-sec/rad. The damping torque at a velocity of 2 rad/s, will be A) 20 N-m B) 40 N-m C) 80 N-m D) 100 N-m

Description : A rotary system has a damping coefficient of 40 N-m-sec/rad. The damping torque at a velocity of 2 rad/s, will be A) 20 N-m B) 40 N-m C) 80 N-m D) 100 N-m

Last Answer : C) 80 N-m

Calculate natural frequency of damped vibration, if damping factor is 0.52 and A natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. ( A )25.62 rad/sec ( B )20.78 rad/sec ( C )14.4 rad/sec ( D )15.33 rad/sec

Description : Calculate natural frequency of damped vibration, if damping factor is 0.52 and A natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. ( A )25.62 rad/sec ( B )20.78 rad/sec ( C )14.4 rad/sec ( D )15.33 rad/sec

Last Answer : ( A )25.62 rad/sec