Mention some areas where PLL is widely used.

Mention some areas where PLL is widely used.
by

1 Answer

Answer :

1.Radar synchronizations

2. Satellite communication systems

3. Air borne navigational systems

4. FM communication systems

5.Computers.
by

Related questions

Mention some typical applications of PLL

Description : Mention some typical applications of PLL

Last Answer : • Frequency multiplication/division • Frequency translation • AM detection • FM demodulation • FSK demodulation.

Which of the following is the basic synthesizer circuit? A. Frequency divider B. Frequency multiplier C. PLL D. Mixer

Description : Which of the following is the basic synthesizer circuit? A. Frequency divider B. Frequency multiplier C. PLL D. Mixer

Last Answer : C. PLL

What is the purpose of having a low pass filter in PLL?

Description : What is the purpose of having a low pass filter in PLL?

Last Answer : *It removes the high frequency components and noise. *Controls the dynamic characteristics of the PLL such as capture range, lock-in range,band-width and transient response. *The charge on the filter capacitor gives a short- time memory to the PLL

Define capture range of PLL.

Description : Define capture range of PLL.

Last Answer : The range of frequencies over which the PLL can acquire lock with an input signal is called the capture range. It is expressed as a percentage of the VCO free running frequency.

Define lock-in range of a PLL.

Description : Define lock-in range of a PLL.

Last Answer : The range of frequencies over which the PLL can maintain lock with the incoming signal is called the lock-in range or tracking range. It is expressed as a percentage of theVCO free running frequency.

What are the three stages through which PLL operates?

Description : What are the three stages through which PLL operates?

Last Answer : 1.Free running 2.Capture 3.Locked/ tracking

List the basic building blocks of PLL

Description : List the basic building blocks of PLL

Last Answer : 1.Phase detector/comparator 2.Low pass filter 3.Error amplifier 4.Voltage controlled oscillator

Which type of fiber optic cable is most widely used? a. Single-mode step-index b. Multimode step-index c. Single-mode graded-index d. Multimode graded-index

Description : Which type of fiber optic cable is most widely used? a. Single-mode step-index b. Multimode step-index c. Single-mode graded-index d. Multimode graded-index

Last Answer : a. Single-mode step-index

Which coaxial cable connector is least expensive and is widely used for TV sets,VCRs and cable TV? A. N-type connector B. F-type connector C. BNC D. PL-259

Description : Which coaxial cable connector is least expensive and is widely used for TV sets,VCRs and cable TV? A. N-type connector B. F-type connector C. BNC D. PL-259

Last Answer : B. F-type connector

Polytetrafluoroethylene (PTFE) is also widely used insulator and is known as. A. polystyrene B. teflon C. ceramic D. bakelite

Description : Polytetrafluoroethylene (PTFE) is also widely used insulator and is known as. A. polystyrene B. teflon C. ceramic D. bakelite

Last Answer : B. teflon

Write the Abbreviation for the following File Extension 1. FMB 2. MMB 3. PLL?

Description : Write the Abbreviation for the following File Extension 1. FMB 2. MMB 3. PLL?

Last Answer : FMB ----- Form Module Binary. MMB ----- Menu Module Binary. PLL ------ PL/SQL Library Module Binary.

Draw and explain PLL as an FM demodulator.

Description : Draw and explain PLL as an FM demodulator.

Last Answer : Explanation:- FM signal which is to be demodulated is applied to input of PLL.VCO output must be identical to input signal if PLL is to remain locked. As PLL is locked, VCO ... error voltage represents the modulating signal. Thus at the error amplifier output we get demodulated FM output.

Draw and label PLL based FM detector.

Description : Draw and label PLL based FM detector.

Last Answer : Draw and label PLL based FM detector.

What is PLL? Explain its operation with a block diagram.

Description : What is PLL? Explain its operation with a block diagram.

Last Answer : PLL - A phase-locked loop or phase lock loop is a control system that generates an output signal whose phase is related to the phase of an input signal Block diagram  ... to the input frequency. The phase - locked loop goes through three states free running capture and phase lock.

Draw block diagram of PLL as a FM demodulator. Explain function of each block.

Description : Draw block diagram of PLL as a FM demodulator. Explain function of each block.

Last Answer : Operation:  The FM signal which is to be demodulated is applied at the input of the PLL.  the PLL is locked to the FM  The error voltage produced at ... using PLL ensures a high Linearity, between the instantaneous input frequency and VCO control voltage (error amplifier output)

In a PLL, lock occurs when the

Description : In a PLL, lock occurs when the (A) input frequency and the VCO frequency are the same (B) Phase error is 1800 (C) VCO frequency is double the input frequency (D) Phase error is 900

Last Answer : In a PLL, lock occurs when the input frequency and the VCO frequency are the same

Which of the following applications include a phase-locked loop (PLL) circuit?

Description : Which of the following applications include a phase-locked loop (PLL) circuit?  (1) Modems (2) AM decoders (3) Tracking filters (4) All of these 

Last Answer : All of these.

A phase-locked loop (PLL) is a feedback circuit consisting of a

Last Answer : A phase-locked loop (PLL) is a feedback circuit consisting of a phase detector, low-pass filter, VCO.

Which of the following describes an ERP system? A. ERP systems provide a foundation for collaboration between departments B. ERP systems enable people in different business areas to communicate C. ERP systems have been widely adopted in large organisations to store critical knowledge used to make the decisions that drive the organisation's performance D. All of the above

Description : Which of the following describes an ERP system? A. ERP systems provide a foundation for collaboration between departments B. ERP systems enable people in different business areas to communicate C. ERP ... used to make the decisions that drive the organisation's performance D. All of the above

Last Answer : D. All of the above

What are the areas of application of non-linear op- amp circuits?

Description : What are the areas of application of non-linear op- amp circuits?

Last Answer : 1. Industrial instrumentation 2. Communication 3. Signal processing

Name two states in which well irrigation is widely used. Mention one advantage of well irrigation in India. -Geography

Description : Name two states in which well irrigation is widely used. Mention one advantage of well irrigation in India. -Geography

Last Answer : Two states in which well irrigation is widely used are Uttar Pradesh and Punjab. Advantage—They are the simplest and the cheapest source of irrigation

Mention some applications of 555 timer

Description : Mention some applications of 555 timer

Last Answer : *Oscillator *pulse generator *ramp and square wave generator *mono-shot multivibrator *burglar alarm *traffic light control.

Mention some of the non – linear applications of op-amps

Description : Mention some of the non – linear applications of op-amps

Last Answer : Rectifier, peak detector, clipper, clamper, sample and hold circuit, log amplifier, anti –log amplifier, multiplier are some of the non – linear op-amp circuits. 

Mention some of the linear applications of op – amps.

Description : Mention some of the linear applications of op – amps.

Last Answer : Adder, subtractor, voltage –to- current converter, current –to- voltage converters, instrumentation amplifier, analog computation ,power amplifier, etc are some of the linear opamp circuits.

Define Multivibrators. Mention its types.

Description : Define Multivibrators. Mention its types.

Last Answer : Multivibrators are regenerative circuits, Which are mainly used in timing applications. Based on their operational characteristics they can be classified into • Astable Multivibrators • Monostable Multivibrators • Bistable Multivibrators

Mention the advantages of opto-couplers:

Description : Mention the advantages of opto-couplers:

Last Answer : *Better isolation between the two stages. *Impedance problem between the stages is eliminated. *Wide frequency response. *Easily interfaced with digital circuit. *Compact and light weight. *Problems such as noise, transients, contact bounce,.. are eliminated. 

Mention any two audio frequency oscillators .

Description : Mention any two audio frequency oscillators .

Last Answer : i. RC phase shift oscillator ii. Wein bridge oscillator

Mention the advantages of Wilson current source.

Description : Mention the advantages of Wilson current source.

Last Answer : (i) Provides high output resistance. (ii) Offers low sensitivity to transistor base currents.

Mention the advantages of integrated circuits over discrete components.

Description : Mention the advantages of integrated circuits over discrete components.

Last Answer : *Miniaturisation and hence increased equipment density. *Cost reduction due to batch processing. *Increased system reliability due to the elimination of soldered joints. *Improved functional performance. *Matched devices. *Increased operating speeds. *Reduction in power consumption.

4. Do you think that reproductive health in our country has improved in the past 50 years? If yes, mention some such areas of improvement -Science

Description : 4. Do you think that reproductive health in our country has improved in the past 50 years? If yes, mention some such areas of improvement -Science

Last Answer : Yes, in the last 50 years, reproductive health in our country has improved. Some such areas of improvement are (i) massive child immunization (ii) maternity and child health (iii) ... and illiteracy and poor overall health remains a major challenge for governments and non government organizations.

(i) Mention the climatic conditions required for growing coconut in India. (ii) Name two areas of coconut production in Sri Lanka. -Geography

Description : (i) Mention the climatic conditions required for growing coconut in India. (ii) Name two areas of coconut production in Sri Lanka. -Geography

Last Answer : (i) Climatic conditions required for growing coconut: Temperature – 25° C to 30° C. Rainfall – 125 to 130 cm well distributed. Frost and draught are very harmful to coconut. (ii) Two areas of coconut production in Sri Lanka are : 1. Nigombo 2. Kurunegala

Mention two ways in which the decomposition of waste in open areas can affect human health. -Geography

Description : Mention two ways in which the decomposition of waste in open areas can affect human health. -Geography

Last Answer : Rodents, insects and other vermin attracted to open dump sites may pose health risks. Dump sites with scrap tires provide an ideal breeding ground for mosquitoes, which can multiply 100 times faster ... solid waste is burnt it may release harmful gases which can harm the health of nearby people.

Mention any four uses of manganese ore. Name three areas where manganese is found. -SST 10th

Description : Mention any four uses of manganese ore. Name three areas where manganese is found. -SST 10th

Last Answer : Four uses of manganese ore are follows : (i) It is an important raw material in the iron and steel industry, used in the manufacturing of steel. Nearly 10 kg of manganese is ... Orissa, Chhindwara and Balaghat in Madhya Pradesh and Shimoga of Karnataka are important areas of manganese mining.

Mention the areas where jute is cultivated. -SST 10th

Description : Mention the areas where jute is cultivated. -SST 10th

Last Answer : The cultivation of jute is done at the Ganga-Brahmaputra delta in West Bengal and in Assam, Bihar and Orissa.

Mention the main areas of production of rubber. -SST 10th

Description : Mention the main areas of production of rubber. -SST 10th

Last Answer : (i) Rubber is mainly produced in southern part of Peninsula. Kerala, Tamil Nadu and Karnataka are the principal states of rubber plantations. (ii) Kerala.

Mention the areas of production of the coffee plant. -SST 10th

Description : Mention the areas of production of the coffee plant. -SST 10th

Last Answer : Coffee is produced in Karnataka, Kerala and on the Nilgiris in Tamil Nadu.

Mention the areas producing sugar in Southern India. -SST 10th

Description : Mention the areas producing sugar in Southern India. -SST 10th

Last Answer : Maharashtra is the most important sugar producing state of South India. The other important sugar producers of South India are Andhra Pradesh, Karnataka and Tamil Nadu.