By increasing the current, the drift velocity A. decreases B. increases C. remains constant D. becomes zero

By increasing the current, the drift velocity

A. decreases

B. increases

C. remains constant

D. becomes zero


by

1 Answer

Answer :

remains constant


by

Related questions

As the ball falls towards the ground, its velocity A. increases B. decreases C. remains constant D. becomes zero

Description : As the ball falls towards the ground, its velocity A. increases B. decreases C. remains constant D. becomes zero

Last Answer :  increases

When water freezes its density – (1) Decreases (2) Becomes Zero (3) Remains constant (4) Increases

Description : When water freezes its density – (1) Decreases (2) Becomes Zero (3) Remains constant (4) Increases

Last Answer : (1) Decreases Explanation: Water at ordinary temperatures contracts and in-creases in density as it is cooled, like most substances. But at about 4°C it reaches a maximum density and then decreases in density as it approaches the freezing point. This is referred to as anomalous property of water.

When water freezes its density (1) Decreases (2) Becomes Zero (3) Remains constant (4) Increases

Description : When water freezes its density (1) Decreases (2) Becomes Zero (3) Remains constant (4) Increases

Last Answer : Decreases

When two gases are mixed, the entroру (a) Remains constant (b) Decreases (c) Increases (d) Becomes zero

Description : When two gases are mixed, the entroру (a) Remains constant (b) Decreases (c) Increases (d) Becomes zero

Last Answer : Ans:(c)

In an oil-lubricated journal bearing, coefficient of friction between the journal and the bearing. [IES-1995] (a) Remains constant at all speeds. (b) is minimum at zero speed and increases monotonically with increase in speed. (c) is maximum at zero speed and decreases monotonically with increase in speed. (d) becomes minimum at an optimum speed and then increases with further increase in speed.

Description : In an oil-lubricated journal bearing, coefficient of friction between the journal and the bearing. [IES-1995] (a) Remains constant at all speeds. (b) is minimum at zero speed and increases ... speed. (d) becomes minimum at an optimum speed and then increases with further increase in speed.

Last Answer : (d) becomes minimum at an optimum speed and then increases with further increase in speed.

With the increase of pressure, the boiling point of any substance - (1) Increases (2) Decreases (3) Remains Same (4) Becomes zero

Description : With the increase of pressure, the boiling point of any substance - (1) Increases (2) Decreases (3) Remains Same (4) Becomes zero

Last Answer : (1) Increases Explanation: The temperature stays the same until all the liquid has vaporized. As the temperature of a liquid rises, the pressure of escaping vapor also rises, and at the boiling point ... vapor is equal to that exerted on the liquid by the surrounding air, causing bubbles to form.

With the increase of pressure, the boiling point of any substance – (1) Increases (2) Decreases (3) Remains Same (4) Becomes zero

Description : With the increase of pressure, the boiling point of any substance – (1) Increases (2) Decreases (3) Remains Same (4) Becomes zero

Last Answer : (1) Increases Explanation: The temperature stays the same until all the liquid has vaporized. As the temperature of a liquid rises, the pressure of escaping vapor also rises, and at the boiling point ... vapor is equal to that exerted on the liquid by the surrounding air, causing bubbles to form.

When a detergent is added to pure water, its surface tension – (1) increases (2) decreases (3) remains constant (4) becomes infinite

Description : When a detergent is added to pure water, its surface tension – (1) increases (2) decreases (3) remains constant (4) becomes infinite

Last Answer : (2) decreases Explanation: When Soaps and detergents are added to water, they weaken the strength of the skin on the water's surface due to surface tension by interfering with hydrogen bonding ... of the soap or detergent is also attracted to the water, thereby decreasing the surface tension.

When a detergent is added to pure water, its surface tension (1) increases (2) decreases (3) remains constant (4) becomes infinite

Description : When a detergent is added to pure water, its surface tension (1) increases (2) decreases (3) remains constant (4) becomes infinite

Last Answer : decreases

After a projectile is fired horizontally near the earth's surface, the horizontal component of its velocity, neglecting any air resistance: w) increases steadily x) decreases steadily y) first decreases, then increases z) remains constant

Description : After a projectile is fired horizontally near the earth's surface, the horizontal component of its velocity, neglecting any air resistance: w) increases steadily x) decreases steadily y) first decreases, then increases z) remains constant

Last Answer : ANSWER: Z -- REMAINS CONSTANT 

.If we narrow the distance between two slits in Young’s experiment the fringes width __________. A. Increases B. Decreases C. Remains same D. becomes zero

Description : .If we narrow the distance between two slits in Young’s experiment the fringes width __________. A. Increases B. Decreases C. Remains same D. becomes zero

Last Answer : B. Decreases

With increasing flow rate, the hydraulic efficiency of a centrifugal pump (A) Monotonically decreases (B) Decreases and then increases(C) Remains constant(D) Increases and then decreases

Description : With increasing flow rate, the hydraulic efficiency of a centrifugal pump (A) Monotonically decreases (B) Decreases and then increases (C) Remains constant (D) Increases and then decreases

Last Answer : (A) Monotonically decreases

By accelerating the magnet inside the coil, the current in it A. increases B. decreases C. remains constant D. reverses

Description : By accelerating the magnet inside the coil, the current in it A. increases B. decreases C. remains constant D. reverses

Last Answer : increases

The velocity of the liquid flowing through the divergent portion of a Venturimeter (A) Remains constant (B) Increases (C) Decreases (D) Depends upon mass of liquid

Description : The velocity of the liquid flowing through the divergent portion of a Venturimeter (A) Remains constant (B) Increases (C) Decreases (D) Depends upon mass of liquid

Last Answer : Answer: Option C

If the motor is overloaded, then the magnitude of ‘back emf’” a. Increases b. Decreases c. Constant d. Becomes zero

Description : If the motor is overloaded, then the magnitude of ‘back emf’” a. Increases b. Decreases c. Constant d. Becomes zero

Last Answer : Increases

An ideal gas is compressed in a cylinder so well insulated that there is essentially no heat transfer. The temperature of gas  a. Remains constant  b. increases  c. decreases  d. is basically zero

Description : An ideal gas is compressed in a cylinder so well insulated that there is essentially no heat transfer. The temperature of gas  a. Remains constant  b. increases  c. decreases  d. is basically zero

Last Answer : increases

On increasing the reverse bias to a large value in a p-n junction diode current (a) Increases slowly (b) Remains fixed (c) Suddenly increases (d) Decreases slowly

Description : On increasing the reverse bias to a large value in a p-n junction diode current (a) Increases slowly (b) Remains fixed (c) Suddenly increases (d) Decreases slowly

Last Answer : (c) Suddenly increases

Object is in equilibrium if resultant force acting on it is A. increasing B. decreasing C. zero D. becomes constant

Description : Object is in equilibrium if resultant force acting on it is A. increasing B. decreasing C. zero D. becomes constant

Last Answer : zero

The surface tension of water on adding detergent to it – (1) increases (2) decreases (3) no change (4) becomes zero

Description : The surface tension of water on adding detergent to it – (1) increases (2) decreases (3) no change (4) becomes zero

Last Answer : (2) decreases Explanation: In the solid and liquid phase, water molecules are bonded to each other by virtue of an interaction between hydrogen atoms on one molecule and the oxygen atom of another - the process ... to as "hydrogen bonding." The result is a kind of "skin" on liquid water's surface.

The surface tension of water on adding detergent to it (1) increases (2) decreases (3) no change (4) becomes zero

Description : The surface tension of water on adding detergent to it (1) increases (2) decreases (3) no change (4) becomes zero 

Last Answer : decreases

With increase in the liquid flow rate at a fixed gas velocity in a randomly packed counter current gas-liquid absorption column, the gas pressure drop (A) Decreases (B) Remains unchanged (C) Increases (D) Decreases exponentially

Description : With increase in the liquid flow rate at a fixed gas velocity in a randomly packed counter current gas-liquid absorption column, the gas pressure drop (A) Decreases (B) Remains unchanged (C) Increases (D) Decreases exponentially

Last Answer : (C) Increases

At boiling point of liquids, its – (1) Temperature increases (2) Atmospheric pressure increases (3) Temperature remains constant (4) Vapour pressure decreases

Description : At boiling point of liquids, its – (1) Temperature increases (2) Atmospheric pressure increases (3) Temperature remains constant (4) Vapour pressure decreases

Last Answer : (3) Temperature remains constant Explanation: An interesting property of matter is that its temperature remains constant during a phase change, assuming its surrounding pressure is constant. A liquid changes into gaseous state at a constant temperature called its boiling point.

If the temperature of a piece increases suddenly, the relative humidity– (1) increases (2) decreases (3) remains constant (4) fluctuates

Description : If the temperature of a piece increases suddenly, the relative humidity– (1) increases (2) decreases (3) remains constant (4) fluctuates

Last Answer : (2) decreases Explanation: Relative humidity is the ratio of the partial pressure of water vapour in a airwater mixture to the saturated vapour pressure of water at a specific temperature.

If the temperature of a place increases suddenly, the relative humidity – (1) Increases (2) Decreases (3) Remains constant (4) Fluctuates

Description : If the temperature of a place increases suddenly, the relative humidity – (1) Increases (2) Decreases (3) Remains constant (4) Fluctuates

Last Answer : (2) Decreases Explanation: Relative humidity is the ratio of the partial pressure of water vapor in an airwater mixture to the saturated vapor pressure of water at a prescribed ... of the system decreases because the saturated vapor pressure of water increases with increasing temperature.

As depth increases, pressure in a fluid A. increases B. decreases C. remains constant D. varies

Description : As depth increases, pressure in a fluid A. increases B. decreases C. remains constant D. varies

Last Answer : increases

As distance increases, value of gravitational field strength A. also increases B. decreases C. remains constant D. may increase or decrease

Description : As distance increases, value of gravitational field strength A. also increases B. decreases C. remains constant D. may increase or decrease

Last Answer : decreases

Assuming all other parameters remain constant, what happens to the pressure of a gas when the volume of the gas is increased? w) increases x) decreases y) fluctuates sinusoidally z) remains the same

Description : Assuming all other parameters remain constant, what happens to the pressure of a gas when the volume of the gas is increased? w) increases x) decreases y) fluctuates sinusoidally z) remains the same

Last Answer : ANSWER: X -- DECREASES

At boiling point of liquids, its (1) Temperature increases (2) Atmospheric pressure increases (3) Temperature remains constant (4) Vapour pressure decreases

Description : At boiling point of liquids, its (1) Temperature increases (2) Atmospheric pressure increases (3) Temperature remains constant (4) Vapour pressure decreases 

Last Answer : Temperature remains constant

If the temperature of a place increases suddenly, the relative humidity (1) Increases (2) Decreases (3) Remains constant (4) Fluctuates

Description : If the temperature of a place increases suddenly, the relative humidity (1) Increases (2) Decreases (3) Remains constant (4) Fluctuates

Last Answer : Decreases

When the voltage remains constant, and the resistance increases in a series circuit, current flow _____________. A. decreases B. remains the same C. increases D. increases by the square

Description : When the voltage remains constant, and the resistance increases in a series circuit, current flow _____________. A. decreases B. remains the same C. increases D. increases by the square

Last Answer : Answer: A

When the voltage remains constant and the resistance is increased in a series circuit, the flow of current _____________. A. increases by the square of the original value B. increases C. remains the same D. decreases

Description : When the voltage remains constant and the resistance is increased in a series circuit, the flow of current _____________. A. increases by the square of the original value B. increases C. remains the same D. decreases

Last Answer : Answer: D

In obstructive jaundice prothrombin time (A) Remains normal (B) Decreases (C) Responds to vit K and becomes normal (D) Responds to vit K and increases

Description : In obstructive jaundice prothrombin time (A) Remains normal (B) Decreases (C) Responds to vit K and becomes normal (D) Responds to vit K and increases

Last Answer : Answer : C

Until a force acts on a body, it's velocity is A. zero B. constant C. increasing D. decreasing

Description : Until a force acts on a body, it's velocity is A. zero B. constant C. increasing D. decreasing

Last Answer :  constant

An object travelling with constant velocity has A. constant momentum B. zero momentum C. increasing momentum D. decreasing momentum

Description : An object travelling with constant velocity has A. constant momentum B. zero momentum C. increasing momentum D. decreasing momentum

Last Answer : constant momentum

If the slope of a graph is zero and so the displacement, then velocity is A. increasing B. decreasing C. constant D. zero

Description : If the slope of a graph is zero and so the displacement, then velocity is A. increasing B. decreasing C. constant D. zero

Last Answer : zero

With increasing bond order, stability of a bond (a) Decreases (b) Increases (c) Remains unchanged (d) None of these

Description : With increasing bond order, stability of a bond (a) Decreases (b) Increases (c) Remains unchanged (d) None of these

Last Answer : Ans:(b)

Water flows through a horizontal pipe at a constant volumetric rate. At a location where the cross sectional area decreases, the velocity of the fluid: (1) increases (2) decreases (3) stays the same (4) none of the above

Description : Water flows through a horizontal pipe at a constant volumetric rate. At a location where the cross sectional area decreases, the velocity of the fluid: (1) increases (2) decreases (3) stays the same (4) none of the above

Last Answer : (1) increases

When a man circles round the earth in a satellite, then (a) His mass becomes zero but weight remains constant (b) Mass remains constant but weight becomes zero (c) Both mass and weight remain constant (d) Both mass and weight remain zero

Description : When a man circles round the earth in a satellite, then (a) His mass becomes zero but weight remains constant (b) Mass remains constant but weight becomes zero (c) Both mass and weight remain constant (d) Both mass and weight remain zero

Last Answer : Ans:(b)

What happens to the internal energy of water at reference temperature where enthalpy is zero?  a. Becomes negative  b. Becomes positive  c. Remains constant  d. Cannot be defined

Description : What happens to the internal energy of water at reference temperature where enthalpy is zero?  a. Becomes negative  b. Becomes positive  c. Remains constant  d. Cannot be defined

Last Answer : Becomes negative

A copper plate has a circular hole cut in it. If the plate is heated to a higher temperature, the diameter of the hole (a) Becomes smaller (b) Increases (c) Remains constant (d) Increases but the total area of the plate remains constant

Description : A copper plate has a circular hole cut in it. If the plate is heated to a higher temperature, the diameter of the hole (a) Becomes smaller (b) Increases (c) Remains constant (d) Increases but the total area of the plate remains constant

Last Answer : Ans:(b)

If the centre distance of the mating gears having involute teeth is varied within limits, the velocity ratio (A) Increases (B) Decreases (C) Remains unchanged (D) None of these

Description : If the centre distance of the mating gears having involute teeth is varied within limits, the velocity ratio (A) Increases (B) Decreases (C) Remains unchanged (D) None of these

Last Answer : (C) Remains unchanged

When the total product rises at an increasing rate, the - (1) marginal product is zero (2) marginal product is rising (3) marginal product is falling (4) marginal product remains constant

Description : When the total product rises at an increasing rate, the - (1) marginal product is zero (2) marginal product is rising (3) marginal product is falling (4) marginal product remains constant

Last Answer : (2) marginal product is rising Explanation: Marginal product of an input (factor of production) is the extra output that can be produced by using one more unit of the input (for instance ... from total product. The other is average product. Marginal product is directly proportional to total product.

During inter conversion of energy from one form to other forms, total energy at any time remains– (1) constant (2) zero (3) increasing (4) decreasing

Description : During inter conversion of energy from one form to other forms, total energy at any time remains– (1) constant (2) zero (3) increasing (4) decreasing

Last Answer : (1) constant Explanation: During interconversion of energy from one form to other forms, total energy at any time remains constant.

When the total product rises at an increasing rate, the (1) marginal product is zero (2) marginal product is rising (3) marginal product is falling (4) marginal product remains constant

Description : When the total product rises at an increasing rate, the (1) marginal product is zero (2) marginal product is rising (3) marginal product is falling (4) marginal product remains constant

Last Answer : marginal product is rising

Mean drift velocity of electron in a copper wire having cross-sectional area 5.0 × 10-6 m2 carrying current of 1 A and having number density 8.5 × 1028 m3 is A. 0.015 mm s-1 B. 0.1 mm s-1 C. 0.5 mm s-1 D. 0.25 mm s-1

Description : Mean drift velocity of electron in a copper wire having cross-sectional area 5.0 × 10-6 m2 carrying current of 1 A and having number density 8.5 × 1028 m3 is A. 0.015 mm s-1 B. 0.1 mm s-1 C. 0.5 mm s-1 D. 0.25 mm s-1

Last Answer : 0.015 mm s-1

When earth fault occurs: a) voltage potential at the earth mat increases due to grounding b) voltage potential at the earth mat decreases due to grounding c) voltage potential at the earth mat remains zero irrespective of fault d) none of the above

Description : When earth fault occurs: a) voltage potential at the earth mat increases due to grounding b) voltage potential at the earth mat decreases due to grounding c) voltage potential at the earth mat remains zero irrespective of fault d) none of the above

Last Answer : Ans: A

In a heat exchanger with steam outside the tubes, a liquid gets heated to 45°C, when its flow velocity in the tubes is 2 m/s. If the flow velocity is reduced to 1 m/s, other things remaining the same, the temperature of the exit liquid will be (A) Less than 45°C (B) More than 45°C (C) Equal to 45°C (D) Initially decreases and remains constant thereafter

Description : In a heat exchanger with steam outside the tubes, a liquid gets heated to 45°C, when its flow velocity in the tubes is 2 m/s. If the flow velocity is reduced to 1 m/s, other things remaining ... than 45°C (B) More than 45°C (C) Equal to 45°C (D) Initially decreases and remains constant thereafter

Last Answer : (B) More than 45°C

When a bar magnet is cut into two equal halves, the pole strength of each piece (1) becomes double (2) becomes half (3) becomes zero (4) remains the same

Description : When a bar magnet is cut into two equal halves, the pole strength of each piece (1) becomes double (2) becomes half (3) becomes zero (4) remains the same

Last Answer : (4) remains the same Explanation: The poles remains same whether the magnet is cut into two equal half or more and also pole strength remains same but magnetic moment reduces due to decrease in the length of ... is called north pole (N-poled of the magnet and the other end the south pole (S-pole).

When a bar magnet is cut into two equal halves, the pole strength of each piece – (1) becomes double (2) becomes half (3) becomes zero (4) remains the same

Description : When a bar magnet is cut into two equal halves, the pole strength of each piece – (1) becomes double (2) becomes half (3) becomes zero (4) remains the same

Last Answer : remains the same

With increase in temperature, the thermal conductivity of most liquids (A) Increases (B) Decreases (C) Remain same (D) First increases upto a certain temperature and then becomes constant

Description : With increase in temperature, the thermal conductivity of most liquids (A) Increases (B) Decreases (C) Remain same (D) First increases upto a certain temperature and then becomes constant

Last Answer : (C) Remain same