LED starts to conduct when voltage is about A. 1 V B. 4 V C. 3 V D. 2 V

LED starts to conduct when voltage is about

A. 1 V

B. 4 V

C. 3 V

D. 2 V


by

1 Answer

Answer :

2 V


by

Related questions

An LED is operated on a 12 volt automobile circuit. The voltage drop across the LED is 2 volts and the current must be limited to 50 milliamps to prevent its overheating and destruction. What size resistor must be used? w) 60 ohms x) 100 ohms y) 120 ohms z) 200 ohms

Description : An LED is operated on a 12 volt automobile circuit. The voltage drop across the LED is 2 volts and the current must be limited to 50 milliamps to prevent its overheating and destruction. What size resistor must be used? w) 60 ohms x) 100 ohms y) 120 ohms z) 200 ohms

Last Answer : ANSWER: Z -- 200 OHMS

What changes do you expect to see when the Democrat-led house starts convening in January?

Description : What changes do you expect to see when the Democrat-led house starts convening in January?

Last Answer : A whole lot of nothing for two years.

The conduct of an eye witness in non disclosing the incident to anybody for a number of days. In highly unnatural on and is sufficient to reject testimony a) Gowhari Das V. Santilata Singh b) Jai Shankar Prasar V. State of Bhihar c) Ganpat Kndiba Chavan Vs. State of Maharashtra d) None of these

Description : The conduct of an eye witness in non disclosing the incident to anybody for a  number of days. In highly unnatural on and is sufficient to reject testimony a) Gowhari Das V. Santilata Singh b) Jai ... Prasar V. State of Bhihar c) Ganpat Kndiba Chavan Vs. State of Maharashtra d) None of these

Last Answer : c) Ganpat Kndiba Chavan Vs. State of Maharashtra

An ac voltage is applied across a diode. The tube will conduct when

Description : An ac voltage is applied across a diode. The tube will conduct when

Last Answer : Positive.

The -------can conduct current in either direction and is turned-on when the breakover voltage is exceeded...

Description : The -------can conduct current in either direction and is turned-on when the breakover voltage is exceeded  A) SCR B) Diac  C) SCS D) Traic

Last Answer : The diac  can conduct current in either direction and is turned-on when the breakover voltage is exceeded.

The required DC voltage for arc welding is- (1) 6 to 9 V (2) 50 to 60 V (3) 200 to 250 V (4) 90 to 100 V

Description : The required DC voltage for arc welding is- (1) 6 to 9 V (2) 50 to 60 V (3) 200 to 250 V (4) 90 to 100 V

Last Answer : (3) 200 to 250 V

If current of 20 mA is passing through op-amp and voltage drop across series resistor is 10 V then value of resistance is A. 500Ω B. 400Ω C. 300Ω D. 200Ω

Description : If current of 20 mA is passing through op-amp and voltage drop across series resistor is 10 V then value of resistance is A. 500Ω B. 400Ω C. 300Ω D. 200Ω

Last Answer : 500Ω

Equation which measures alternating voltage is A. Vsin ω B. sin t C. Vo sinωt D. V=IR

Description : Equation which measures alternating voltage is A. Vsin ω B. sin t C. Vo sinωt D. V=IR

Last Answer : Vo sinωt

A resistor of value R/2 is connected in parallel with a resistor of value R/3. The voltage drop across the parallel combination is V. The total current supplied by the voltage source is: w) 2 V/R (read: 2 V over R) x) 3 V/R (read: 3 V over R) y) 4 V/R (read: 4 V over R) z) 5 V/R (read: 5 V over R)

Description : A resistor of value R/2 is connected in parallel with a resistor of value R/3. The voltage drop across the parallel combination is V. The total current supplied by the voltage source is: w) 2 V/R (read: 2 V over R) x) 3 V/R (read: 3 V over R) y) 4 V/R (read: 4 V over R) z) 5 V/R (read: 5 V over R)

Last Answer : ANSWER: Z -- 5 V/R

what is a word that describes valentines day and starts with v?

Description : what is a word that describes valentines day and starts with v?

Last Answer : pls help!

what is a good describing word that starts with v?

Description : what is a good describing word that starts with v?

Last Answer : dont read i mested up!

Superconductors are those elements – (1) Whose conductivity is intermediate between metals and insulators (2) Whose resistance falls almost to zero at very low temperature (3) Which conduct electricity only at super-high temperature (4) Which conduct electricity only, at super-high temperatures

Description : Superconductors are those elements – (1) Whose conductivity is intermediate between metals and insulators (2) Whose resistance falls almost to zero at very low temperature (3) Which conduct electricity only at super-high temperature (4) Which conduct electricity only, at super-high temperatures

Last Answer : (2) Whose resistance falls almost to zero at very low temperature Explanation: Superconductivity is a phenomenon of exactly zero electrical resistance and expulsion of magnetic fields occurring in ... lines from the interior of the superconductor as it transitions into the superconducting state.

Super conductors are substances that – (1) offer minimum resistance to flow of electric current (2) conduct electricity at low temperature (3) conduct electricity at high temperature (4) offer high resistance to the flow of electric current

Description : Super conductors are substances that – (1) offer minimum resistance to flow of electric current (2) conduct electricity at low temperature (3) conduct electricity at high temperature (4) offer high resistance to the flow of electric current

Last Answer : (1) offer minimum resistance to flow of electric current Explanation: A superconductor is a material that can conduct electricity or transport electrons from one atom to another with no ... is released from the material when it reaches the temperature at which it becomes superconductive.

Solids which conduct electricity at higher temperature but not at lower temperature are called (1) super-conductor (2) metallic-conductor (3) semi-conductor (4) insulator

Description : Solids which conduct electricity at higher temperature but not at lower temperature are called (1) super-conductor (2) metallic-conductor (3) semi-conductor (4) insulator

Last Answer : (3) semi-conductor Explanation: Semiconductors are insulators at low temperatures and reasonably good conductors at higher temperatures. As temperature increases, the semiconductor material becomes a better and better conductor.

Super conductors are substances that (1) offer minimum resistance to flow of electric current (2) conduct electricity at low temperature (3) conduct electricity at high temperature (4) offer high resistance to the flow of electric current

Description : Super conductors are substances that (1) offer minimum resistance to flow of electric current (2) conduct electricity at low temperature (3) conduct electricity at high temperature (4) offer high resistance to the flow of electric current

Last Answer : offer minimum resistance to flow of electric current

Solids which conduct electricity at higher temperature but not at lower temperature are called (1) super-conductor (2) metallic-conductor (3) semi-conductor (4) insulator

Description : Solids which conduct electricity at higher temperature but not at lower temperature are called (1) super-conductor (2) metallic-conductor (3) semi-conductor (4) insulator

Last Answer : semi-conductor

Superconductors are those elements (1) Whose conductivity is intermediate between metals and insulators (2) Whose resistance falls almost to zero at very low temperatures (3) which turn into insulators at very low temperatures (4) which conduct electricity only at super-high temperatures

Description : Superconductors are those elements (1) Whose conductivity is intermediate between metals and insulators (2) Whose resistance falls almost to zero at very low temperatures (3) which turn into insulators at very low temperatures (4) which conduct electricity only at super-high temperatures

Last Answer : Whose resistance falls almost to zero at very low temperatures

Low voltage releases as used in some shipboard motor starter and control equipment will have which of the following characteristics? A. They trip circuit contactors when the motor starts to overspeed. B. They require manual resetting upon restoration of normal voltage. C. They use a phase sensitive relay to trip contacts in series with the holding coil of the starter. D. They allow the motor to restart upon restoration of normal voltage.

Description : Low voltage releases as used in some shipboard motor starter and control equipment will have which of the following characteristics? A. They trip circuit contactors when the motor starts to overspeed. B. ... coil of the starter. D. They allow the motor to restart upon restoration of normal voltage.

Last Answer : Answer: D

. In a common anode, seven-segment LED display, an individual LED will light if a negative voltage is applied to what element?

Description : . In a common anode, seven-segment LED display, an individual LED will light if a negative voltage is applied to what element?

Last Answer : The cathode.

Sir , if there are 9 LEDs connected in series with the 9 volt battery and each led has a forward voltage drop of 1 volt , do i need a resistor in the circuit (in series with led)?

Description : 9 leds each of 1 volt drop is series with 9  volt battery , do we need a resistor?(SMD leds) I have seen some smd leds without resistor !

Last Answer : We connect resistor to limit the current. So, it depends upon the current rating of the LED, which is provided by manufacturer.

Analyze the effect of supply voltage on performance of LED as regards current, Lumen output, efficacy and life.

Description : Analyze the effect of supply voltage on performance of LED as regards current, Lumen output, efficacy and life. 

Last Answer : 1) Effect on Current:- In LED current depends upon supply voltage, if voltage get changes then current also change but this change in current will be control by resistors which are connected in series.  2) ...   4) Effect on Life:- If supply voltage is not stable then life of LED get reduced. 

How do you know the voltage of an LED?

Description : How do you know the voltage of an LED?

Last Answer : After connecting led to a DC source we can measure the voltage of led by connecting a voltmeter across it.  But voltage rating of the led is given by the manufacturers. Or we can ... in the market For more doubts connect with me in linkdin [email protected] 

What is the voltage of a red LED?

Description : What is the voltage of a red LED?

Last Answer : A red led requires 2v to light. LEDs requires different amounts of voltage ranging between 1.8 and 3.3 depending on the intensity and color of the Led.

Aerospace engineers, how long would a commercial passenger aeroplane last in the vacuum of space, before it starts leaking atmosphere?

Description : Aerospace engineers, how long would a commercial passenger aeroplane last in the vacuum of space, before it starts leaking atmosphere?

Last Answer : answer:I'm not a structural guy . Maybe someone can answer that part of your question. I can however answer about over design. We make an engine critical part that is exposed to an operating ... for that altitude craft could survive in outer space since that would be only about 33% more stress.

A train starts its journey from a stationary position and after running for 1 minute in parallel, 30 m / s speed is obtained. Determine the speed of the train in 1 minute ?

Description : A train starts its journey from a stationary position and after running for 1 minute in parallel, 30 m / s speed is obtained. Determine the speed of the train in 1 minute ?

Last Answer : Here , the initial velocity , u = 0 m / s end velocity , v = 30 m / s time , t = 1 min = 60 sec we know , acceleration , a = (v- u) / t = (30- 0) / 60 = 0.5 m / s ^ 2 Acceleration = 0.5 m / s ^ 2

A barometer is kept inside a bell jar. Air is slowly pumped out of the jar. (1) The mercury level starts rising (2) The mercury level starts falling (3) The mercury level does not change (4) The bell jar breaks up

Description : A barometer is kept inside a bell jar. Air is slowly pumped out of the jar. (1) The mercury level starts rising (2) The mercury level starts falling (3) The mercury level does not change (4) The bell jar breaks up

Last Answer : (1) The mercury level starts rising Explanation: As the pump removes the air from the bell jar the pressure obviously reduces around the barometer. The reduction in pressure around the barometer leads it to expand. As the pump removes air from the jar, the mercury level rises.

A car traveling at a constant velocity of 20 meters per second passes a second car which is initially at rest. The car which was at rest starts accelerating at 10 meters per second squared the instant it is passed by the first car. They will meet again in: w) 2 seconds x) 4 seconds y) 6 seconds z) 8 seconds

Description : A car traveling at a constant velocity of 20 meters per second passes a second car which is initially at rest. The car which was at rest starts accelerating at 10 meters per second squared the instant it is passed ... car. They will meet again in: w) 2 seconds x) 4 seconds y) 6 seconds z) 8 seconds

Last Answer : ANSWER: X -- 4 SECONDS

If a sled has a constant acceleration of 2 meters per second squared and starts from rest, the distance in meters that it will have covered after 5 seconds is: w) 10 meters x) 20 meters y) 25 meters z) 50 meters

Description : If a sled has a constant acceleration of 2 meters per second squared and starts from rest, the distance in meters that it will have covered after 5 seconds is: w) 10 meters x) 20 meters y) 25 meters z) 50 meters

Last Answer : ANSWER: Y -- 25 METERS

A barometer is kept inside a bell jar. Air is slowly pumped out of the jar. (1) The mercury level starts rising (2) The mercury level starts falling (3) The mercury level does not change (4) The bell jar breaks up

Description : A barometer is kept inside a bell jar. Air is slowly pumped out of the jar. (1) The mercury level starts rising (2) The mercury level starts falling (3) The mercury level does not change (4) The bell jar breaks up

Last Answer : The mercury level starts rising

Light Emitting Diodes (LED) is used in fancy electronic devices such as toys emit (1) X-rays (2) ultraviolet light (3) (4) All of the above (4) radio waves

Description : Light Emitting Diodes (LED) is used in fancy electronic devices such as toys emit (1) X-rays (2) ultraviolet light (3) (4) All of the above (4) radio waves

Last Answer : (4) All of the above Explanation: A light-emitting diode (LED) is a semiconductor light source that emits light when current flows through it. Infrared LEDs are used in remote-control circuits, such as those used with a wide variety of consumer electronics.

Output current from an LED is A. 20 mA B. 30 mA C. 40 mA D. 50 mA

Description : Output current from an LED is A. 20 mA B. 30 mA C. 40 mA D. 50 mA

Last Answer : 20 mA

To limit current in LED, resistor should be connected in A. parallel B. series C. evacuated flask D. ionized tube

Description : To limit current in LED, resistor should be connected in A. parallel B. series C. evacuated flask D. ionized tube

Last Answer : series

A device used to avoid the relay destroying the op-amp is A. diode B. LED C. reverse bias diode D. forward biased diode

Description :  A device used to avoid the relay destroying the op-amp is A. diode B. LED C. reverse bias diode D. forward biased diode

Last Answer : reverse bias diode

In Rutherford's experiment involving the deflection of alpha particles by atomic nuclei, the fact that some of the alpha particles bombarding the thin gold foil were back-scattered, led to one of the following conclusions. It was concluded that: w) the charge of an electron is negative x) the nucleus of a gold atom carries all its charge y) most of the mass of a gold atom is in its nucleus z) the nucleus of a gold atom occupies nearly the entire space of the atom

Description : In Rutherford's experiment involving the deflection of alpha particles by atomic nuclei, the fact that some of the alpha particles bombarding the thin gold foil were back-scattered, led to one of the ... its nucleus z) the nucleus of a gold atom occupies nearly the entire space of the atom

Last Answer : ANSWER: Y -- MOST OF THE MASS OF A GOLD ATOM IS IN ITS NUCLEUS