A component whose property changes when there is a change in any

physical quantity of a device is

A. processor

B. sensor

C. output device

D. portable device


1 Answer

Answer :

sensor

Related questions

Description : A part of Windows 2000 operating system that is not portable is (A) Device Management (B) Virtual Memory Management (C) Processor Management (D) User Interface

Last Answer : (B) Virtual Memory Management

Description : Which are the causes of the interrupt: a. In any single device b. In processor poll devices c. In a device whose ID number is stored on the address bus d. Allof these

Last Answer : d. Allof these

Description : The change in physical size of a substance when its temperature changes.  a. intensive property  b. extensive property  c. volume expansion  d. thermal expansion

Last Answer : thermal expansion

Description : Marginal cost is defined as____ a). Cost that arises when the quantity produced changes by one unit b). Cost of producing one more unit of a good c). Increase in cost that accompanies a unit in crease in output d). All the above

Last Answer : d). All the above

Description : In a strain measuring device, using a strain gauge, the output quantity is  A) Voltage B) resistance C) Impedance D) either A) or B)

Last Answer : In a strain measuring device, using a strain gauge, the output quantity is Voltage

Description : Which of the following physical quantities changes or tends to change the state of rest or of uniform motion of a body in a straight line? (1) Momentum (2) Mass (3) Force (4) Inertia

Last Answer : (3) Force Explanation: Force is an agent which changes or tends to change the state of rest or of uniform motion of a body.

Description : What are the advantages of using logical spool servers? Note: there are 2 correct answered to this question A. You can create more output devices B. You can balance the load across ... on physical devices D. You can minimize the manual adjustment of output device definitions after the transport

Last Answer : B. You can balance the load across multiple physical spool servers C. You can minimize the load on physical devices

Description : What is the level of physical quantity ?

Last Answer : The presence of a physical quantity is called the dimension of the sum of the basic quantities.

Description : Which physical quantity is measured in ‘siemens’? (1) Electric potential (2) Electrical conductance (3) Magnetic flux (4) Refractive index

Last Answer : (2) Electrical conductance Explanation: The Siemens is the unit of electric conductance, electric susceptance and electric admittance in the International System of Units (SI).

Description : Price elasticity of demand provides A.A measure of the responsiveness of the quantity demanded to changes in the price of the product, holding constant the values of all other variables in the demand function ... the firm C.A technical change in the cost of product D.Technical change in the value.

Last Answer : A.A measure of the responsiveness of the quantity demanded to changes in the price of the product, holding constant the values of all other variables in the demand function.

Description : The largest change of input quantity for which there is no output of instrument is called ______ A) Dead time B) Dead input C) Dead output D) Dead zone

Last Answer : The largest change of input quantity for which there is no output of instrument is called Dead zone

Description : A _________ is a quantity whose value depends on the path followed during a particular change in state.  a. path function  b. point function  c. process  d. cycle

Last Answer : path function

Description : Which are benefit of input/output interrupt: a. It is an external analogy to exceptions b. The processor initiates and perform all I/O operation c. The data is transferred into the memory through interrupt handler d. = Alllof these

Last Answer : d. = Alllof these

Description : The taskof moving the packet from theinput queue to the output queuein a router is done by_________. A) input and output ports B) routing processor C) switching fabrics D) none of the above

Last Answer : switching fabrics

Description : What is Output: a) What the processor takes from the user b) What the processor gives to the user c) What the processor gets from the user d) None of These

Last Answer : b) What the processor gives to the user

Description : What is output: a) what the processor gives to the user b) what the user gives to the processor c) what the processor gets from the user d) what the processor informs to the user e) None of The Above

Last Answer : a) what the processor gives to the user

Description : What is Output: a) What the processor takes from the user b) What the processor gives to the user c) What the processor gets from the user d) None of These

Last Answer : b) What the processor gives to the user

Description : What is output? a) What the processor takes from the user b) What the user gives to the processor c) What the processor gets from the user d) What the processor gives to the user e) None of these

Last Answer : d) What the processor gives to the user

Description : The operating system determines the manner in which all of the following occurs except a) user creation of a document b) user interaction with the processor c) printer output d) data displayed on the monitor e) None of these

Last Answer : b) user interaction with the processor

Description : When memory write or I/O read are active data is from the processor: a. Input b. Output c. Processor d. None of these

Last Answer : b. Output

Description : When memory read or I/O read are active data is to the processor : a. Input b. Output c. Processor d. None of these

Last Answer : a. Input

Description : What is the output of the following program ? (Assume that the appropriate pre-processor directives are included and there is no syntax error) main() { char S[ ] = "ABCDEFGH"; printf ("%C",* (& ... Base address of S is 1000 */ } (A) ABCDEFGH1000 (B) CDEFGH1000 (C) DDEFGHH1000 (D) DEFGH1000

Last Answer : (D) DEFGH1000

Description : One of use of microprogramming to implement _ ____ of processor in Intel 80x86 and Motorola 680x0 processors whose instruction set are evolved from 360 original. a. Control structure b. Without control c. Control unit d. Only control

Last Answer : c. Control unit

Description : A store has on sale a computer and word processor small enough to fit in your pocket. It can add, multiply, subtract, divide, and write in all languages. A delete device will correct any error. No ... price? Only a few cents! How can the store make a profit by selling it so cheap? -Riddles

Last Answer : The computer is a wooden pencil with an eraser!

Description : How was the generation of computer classified? A) by the device used in memory & processor B) by the speed of computer C) by the model of the computer D) by the accuracy of computer

Last Answer : Answer : A

Description : USB refers to a ______ A. storage device B. processor C. port type D. None of the Above

Last Answer : C. port type

Description : Which is one of the important I/O devices and is most commonly used as permanent storage device in any processor: a. Soft disk b. Hard disk c. Botha &b d. None of these

Last Answer : b. Hard disk

Description : Which are the not causes of the interrupt: a. In any single device b. In processor poll devices c. Itis an external analogy to exception d. None of these

Last Answer : c. Itis an external analogy to exception

Description : Which are the functioning of I/O interrupt: a. The processor organizes all the I/O operation for smooth functioning b. After completing the I/O operation the device interrupt the processor c. Both d. None of these

Last Answer : b. After completing the I/O operation the device interrupt the processor

Description : How was the generation of computer classified: a) by the speed of the computer b) by the model of the computer c) by the device used in memory & processor d) by the accuracy of the computer e) None of The Above

Last Answer : c) by the device used in memory & processor

Description : A _________ is an electronic device that processes data, converting it into information 1) Computer 2) Processor 3) Case 4) Stylus

Last Answer : 2) Processor

Description : The method of synchronising the processor with the I/O device in which the device sends a signal when it is ready is? a) Exceptions b) Signal handling c) Interrupts d) DMA

Last Answer : Interrupts

Description : To overcome the lag in the operating speeds of the I/O device and the processor we use ___________ a) BUffer spaces b) Status flags c) Interrupt signals d) Exceptions

Last Answer : Status flags

Description : The external device is connected to a pin called the ______ pin on the processor chip. a. Interrupt b. Transfer c. Both d. None of these

Last Answer : a. Interrupt

Description : The microprocessor can read/write 16 bit data from or to ________ A. memory B. I /O device C. processor D. register

Last Answer : The microprocessor can read/write 16 bit data from or to memory 

Description : It takes 500 watts to operate a machine whose power output is 480 watts. Which of the following is the efficiency of the machine? Is it w) 20% x) 48% y) 96% z) 98%

Last Answer : ANSWER: Y -- 96%

Description : What physical quantity is expresed by rate of change of angular momentum and gives its si unit?

Last Answer : Rate of change means that you divide something by time ("perunit time" or "per second"), so you would use the units of angularmomentum, divided by seconds.I am not aware of any special name forthis concept.

Description : When a physical property such as charge exists in discrete "packets" rather than in continuous amounts, the property is said to be: w) discontinuous x) abrupt y) quantized z) noncontinuous

Last Answer : ANSWER: Y -- QUANTIZED

Description : The routing processor of arouter performs the ________ layer functions of therouter. A) physical and data link B) network C) transport D) none of the above

Last Answer : network

Description : Would a portable device that gives chest compressions work?

Last Answer : https://www.lucas-cpr.com/

Description : I'd like to buy a small, portable device that I can use to access the internet via wireless. Would you recommend an ipod touch, Kindle touch, or something else?

Last Answer : Not sure what your price point is and what Apps you need to run but I have a Kindle Fire and it serves the purpose you describe and for $199 is a good solution. Of course you can go for the IPad if ... to do the IPad can run around $500 give or take $100 based on how much memory you want or need.

Description : If I wanted one portable hand-held device in addition to my desktop computer and my crapola LG Verizon phone that I use for emergencies only, what would make sense?

Last Answer : answer:I'll take the Ipod. I like my Ipad, because it is lightweight, and the screen is a good size for doing all I like to do on the internet. My android phone, similar to an iphone, is too small in my ... of light the Kindle has a good screen for that, but I don't think you can do much else on it.

Description : I seem to be missing the Wpdmtp.inf file on my computer, and so it can't load portable device drivers. How can I fix that?

Last Answer : I found the file, saved it… and Device Manager still throws code 31. Code 31’s resolution is to uninstall the drivers, do a hardware scan, and reinstall. After doing all that, it still throws 31. WTF. Help?

Description : An emergency portable device to save a person from a rushing tsunami-?

Last Answer : Getting air would be a problem, as would being swept out to sea.

Description : I'm thinking about getting an Ipad with a portable wifi (mifi) like device? Advice?

Last Answer : answer:I'm using my Android phone rather than a dedicated device, and one thing I'll say is that it's a pain to charge more than one device to perform a single function. If you are also looking at a ... do this so I would only be paying for one data plan per month, rather than having to pay twice.

Description : A device which can be used to check the calibration of a circuit breaker is a _________________. A. 500 volt megohmmeter B. portable low voltage high current testing unit C. standard digital multimeter D. clamp-on voltmeter

Last Answer : Answer: B

Description : Inductance is the property of an electric circuit that _____________. A. opposes any change in the applied voltage B. opposes any change in the current flow through the circuit C. aids any changes in the applied voltage D. aids any changes in the current through the circuit

Last Answer : Answer: B

Description : The H quantity is analogous to which component in the following? a) B b) D c) E d) V

Last Answer : c) E

Description : The normal component of which quantity is always discontinuous at the boundary? a) E b) D c) H d) B

Last Answer : b) D