Which stone floats on water?

A. Pumice stone (Answer)

B. Lime stone

C. Basalt stone

D. Quartzite stone

1 Answer

Answer :

A. Pumice stone (Answer)

Related questions

Description : Which of the following metamorphic rocks has the most weather resisting characteristics? (A) Marble (B) Quartzite (C) Slate (D) Lime stone

Last Answer : Answer: Option B

Description : Which of the following sedimentary rocks changes into quartzite by metamorphic action? (A) Sand stone (B) Lime stone (C) Shale (D) Gypsum

Last Answer : Answer: Option A

Description : The rock generally used for roofing, is (A) Granite (B) Basalt (C) Slate (D) Pumice

Last Answer : Answer: Option C

Description : The commonly used raw material in the manufacture of cement, is (A) Slate (B) Sand stone (C) Lime stone (D) Basalt

Last Answer : Answer: Option C

Description : Can you use a beach pebble as a pumice stone?

Last Answer : It’s probably safe, but pebbles (at least when I think of it) are normally small and smooth; pumice is a little bit rough, and that’s what makes it work.

Description : What would likely to happen if heavy pressure applied when using a pumice stone?

Last Answer : If this is about beauty, Skin Care etc, then the likely answeris that you'll cause an abrasion.

Description : What would likely to happen if heavy pressure applied when using a pumice stone?

Last Answer : If this is about beauty, Skin Care etc, then the likely answeris that you'll cause an abrasion.

Description : Hardest material so far found is (A) Diamond (B) Graphite (C) Carborundum (D) Pumice stone

Last Answer : (A) Diamond

Description : Hardest materials so far found is (A) Diamond (B) Graphite (C) Carborundum (D) Pumice stone

Last Answer : (A) Diamond

Description : Quartzite, a metamorphic stone is (A) Hard (B) Brittle (C) Crystalline (D) All the above

Last Answer : Answer: Option D

Description : Which of the following stone is best suited for construction of piers and abutments of Railway Bridge a) Granite* b) Sandstone c) Limestone d) Quartzite

Last Answer : a) Granite*

Description : Stone generally preferred for railway ballast is a) Sandstone b) Dolomite c) Marble d) Basalt or trap granite*

Last Answer : d) Basalt or trap granite*

Description : The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All the above

Last Answer : Answer: Option D

Description : The slag which floats on the surface of the molten iron generally contains (A) Lime (CaO) 45% (B) Silica (SiO2) 35% (C) Alumina (Al2O3) 12% and MgO, CaSO4, KMnO2 and FeO 8% (D) All these

Last Answer : Answer: Option D

Description : What is used in making of alloys? A. Gypsum B. Granite C. Chromium (Answer) D. Lime-stone

Last Answer : C. Chromium (Answer)

Description : Which of these is not a Metamorphic rock? A. Quartzite (Answer) B. Slate C. Gneiss D. Schist

Last Answer : A. Quartzite (Answer)

Description : Which of the following represents a metamorphic rock? (i) Slate (ii) Shale (iii) Quartzite The correct answer is (A) Only (iii) (B) Both (i) and (iii) (C) Both (ii) and (iii) (D) All (i), (ii) and (iii)

Last Answer : Answer: Option B

Description : The first step in the treatment of erosion is: A. Pumice and water B. Spray with Na-bicarbonate C. GIC

Last Answer : A. Pumice and water

Description : How do you treat dentine before applying GIC A. Conditioner B. Pumice & water

Last Answer : A. Conditioner

Description : Before filling a class V abrasion cavity with GIC you should(+adc March07) A. Clean with pumice, rubber cup, water and weak acid B. Dry the cavity thoroughly before doing anything C. Acid itch cavity then dry thoroughly

Last Answer : A. Clean with pumice, rubber cup, water and weak acid

Description : Out of the following substances, one ton of __________ will store the maximum heat for a rise of 30°C in temperature. (A) Steel (B) Lignite (C) Water (D) Lime stone

Last Answer : (C) Water

Description : Pavement is said to be flexible if it contains (A) Water bound macadam surface (B) Stabilised soil base constructed of lime cement or tar (C) Bitumen-bound stone layer of varying aggregates (D) All the above

Last Answer : Answer: Option D

Description : Hydraulic lime is obtained by (A) Burning of lime stone (B) Burning of kankar (C) Adding water to quick lime (D) Calcination of pure clay

Last Answer : Answer: Option B

Description : Is pumice shiny or dull?

Last Answer : dull

Description : How do you describe pumice rocks?

Last Answer : Thrown out of an active volcano during an eruption, pumice is lava that is so full of gas bubble holes that pumice is very light and can sometime float. I remember my mother in Liverpool, England, in ... today, especially by women who used the pumice stone to sand away the hard skin on their heels.

Description : What is a swift move in cloud of pumice and ash?

Last Answer : Feel Free to Answer

Description : Which of the following is not an abrasive material? (A) Bakelite (B) Pumice (C) Corundum (D) Carborundum

Last Answer : (A) Bakelite

Description : North American Indians used this mineral of volcanic origin to make tips for arrows: w) obsidian x) quartz y) flint z) pumice

Last Answer : ANSWER: W -- OBSIDIAN

Description : The principal aquifer of the artesian wells of Florida is a: w) porous sandstone x) fissured limestone y) series of clay beds z) mass of pumice

Last Answer : ANSWER: X -- FISSURED LIMESTONE

Description : The gas let out when the: lime stone is heated?

Last Answer : Carbon dioxide

Description : The product obtained when lime stone is heated?

Last Answer : Quicklime and Carbondioxide

Description : What happens when lime stone is not added during the extraction of iron?

Last Answer : If limestone is not added to charge during the extraction of iron, the blast furnace will get blocked.

Description : State the role of lime stone in the extraction of iron from haematite. Or Why is lime stone added during the extraction of iron?

Last Answer : Limestone reacts with the sand present as impurity in the ore forming calcium silicate which is taken out of the blast furnace as slag.

Description : Which plain formed due to the weathering of lime stone? -Do You Know?

Last Answer : answer:

Description : In conversion of lime-stone to lime, `CaCO_(3(s)) to CaO_((s)) + CO_(2(g))` the values of `DeltaH^@` and `DeltaS^@` are `+179.1 kJmol^(-1)` and `160.2

Last Answer : In conversion of lime-stone to lime, `CaCO_(3(s)) to CaO_((s)) + CO_(2(g))` the values of `DeltaH^@` and ... : A. 1008 K B. 1200 K C. 845 K D. 1118 K

Description : Why lime stone is added in the extraction of lead from galena ?

Last Answer : Why lime stone is added in the extraction of lead from galena ? A. It prevents the formation of ... moves the impurity of iron oxide as fusible slag.

Description : Why lime stone is added in the extraction of lead from galena?

Last Answer : Why lime stone is added in the extraction of lead from galena? A. It prevents the formation of ... moves the impurity of iron oxide as fusible slag.

Description : In the extraction of iron from haematitie, the charge used is haematite, coke and lime stone in the following weight ration

Last Answer : In the extraction of iron from haematitie, the charge used is haematite, coke and lime stone in the following weight ration ... C. `8:1:4` D. `1:4:8`

Description : Lime stone, Sand stone and Dolomite are

Last Answer : Ans. Sedimentary rocks

Description : Which mineral is mostly found in northern and western mountains of Pakistan? A. Chromite B. Lime-stone C. China Clay D. Gypsum

Last Answer : ANSWER: B

Description : Hyderabad has deposits of _____. A. Chromite B. Gypsum C. Fire Clay D. Lime-stone

Last Answer : ANSWER: D

Description : Which mineral is mostly found in northern and western mountains of Pakistan? A. Chromite B. Lime-stone C. China Clay D. Gypsum

Last Answer : ANSWER: B

Description : Minerals Hyderabad has deposits of _____. A. Chromite B. Gypsum C. Fire Clay D. Lime-stone

Last Answer : ANSWER: D

Description : What is used in making of alloys? A. Lime-stone B. Chromium C. Granite D. Gypsum

Last Answer : ANSWER: B

Description : Which plain formed due to the weathering of lime stone?

Last Answer : Karst plains

Description : Which plain formed due to the weathering of lime stone?

Last Answer : Karst plains

Description : The commonly used material in the manufacture of cement is (A) Sand stone (B) Slate (C) Lime stone (D) Graphite

Last Answer : (C) Lime stone

Description : The rock which is not calcareous, is: (A) Lime stone (B) Chalk (C) Laterite (D) None of these

Last Answer : (D) None of these

Description : Ordinary Portland cement is manufactured from (A) Lime stone and clay (B) Gypsum and lime (C) Pozzolana (D) Lime, pozzolana and clay

Last Answer : Answer: Option B

Description : Dolomite is a lime stone which contains carbonate of magnesia upto (A) 15 % (B) 20 % (C) 25 % (D) 45 %

Last Answer : Answer: Option D