Pavement is said to be flexible if it contains (A) Water bound macadam surface (B) Stabilised soil base constructed of lime cement or tar (C) Bitumen-bound stone layer of varying aggregates (D) All the above

Pavement is said to be flexible if it contains
(A) Water bound macadam surface
(B) Stabilised soil base constructed of lime cement or tar
(C) Bitumen-bound stone layer of varying aggregates
(D) All the above
by

1 Answer

Answer :

Answer: Option D
by

Related questions

Following type of pavement is generally known as flexible pavement (A) Water-bound macadam roads (B) Stabilised soil roads (C) Road constructed with various layers of building material well compacted (D) All the above

Description : Following type of pavement is generally known as flexible pavement (A) Water-bound macadam roads (B) Stabilised soil roads (C) Road constructed with various layers of building material well compacted (D) All the above

Last Answer : Answer: Option D

The binder normally used in flexible pavement construction is (A) Cement (B) Lime (C) Bitumen (D) None of the above

Description : The binder normally used in flexible pavement construction is (A) Cement (B) Lime (C) Bitumen (D) None of the above

Last Answer : Answer: Option C

In ideal pavement is constructed with (A) Bricks (B) Hard soil (C) Portland cement concrete (D) Tar

Description : In ideal pavement is constructed with (A) Bricks (B) Hard soil (C) Portland cement concrete (D) Tar

Last Answer : Answer: Option C

In the penetration macadam construction, the bitumen is (A) Sprayed after the aggregates are spread and compacted (B) Premixed with aggregates and then spread (C) Sprayed before the aggregates are spread and compacted (D) None of the above

Description : In the penetration macadam construction, the bitumen is (A) Sprayed after the aggregates are spread and compacted (B) Premixed with aggregates and then spread (C) Sprayed before the aggregates are spread and compacted (D) None of the above

Last Answer : Answer: Option A

In water bound macadam roads, binding material, is (A) Sand (B) Stone dust (C) Cement(D) Brick dust

Description : In water bound macadam roads, binding material, is (A) Sand (B) Stone dust (C) Cement (D) Brick dust

Last Answer : Answer: Option B

Select the correct statement. (A) Quantity of binder required for tack coat is less than that required for prime coat (B) Prime coat treatment is given for plugging the voids in water bound macadam during bituminous road construction (C) Seal coat is the final coat over certain previous bituminous pavements (D) A bitumen primer is a high viscosity cutback

Description : Select the correct statement. (A) Quantity of binder required for tack coat is less than that required for prime coat (B) Prime coat treatment is given for plugging the voids in water ... the final coat over certain previous bituminous pavements (D) A bitumen primer is a high viscosity cutback

Last Answer : Answer: Option D

The camber of shoulders in water bound macadam roads is (A) Equal to the cross slope of pavement (B) Less than the cross slope of pavement (C) Greater than the cross slope of pavement (D) Zero

Description : The camber of shoulders in water bound macadam roads is (A) Equal to the cross slope of pavement (B) Less than the cross slope of pavement (C) Greater than the cross slope of pavement (D) Zero

Last Answer : Answer: Option A

The aggregates required for one kilometre length of water bound macadam road per meter width and for 10 mm thickness is (A) 8 cubic meter (B) 10 cubic meter (C) 12 cubic meter (D) 15 cubic meter

Description : The aggregates required for one kilometre length of water bound macadam road per meter width and for 10 mm thickness is (A) 8 cubic meter (B) 10 cubic meter (C) 12 cubic meter (D) 15 cubic meter

Last Answer : Answer: Option C

For the construction of water bound macadam roads, the correct sequence of operations after spreading coarse aggregates is (A) Dry rolling, wet rolling, application of screening and application of filler (B) Dry rolling, application of filler, wet rolling and application of screening (C) Dry rolling, application of screening, wet rolling and application of filler (D) Dry rolling, application of screening, application of filler and wet rolling

Description : For the construction of water bound macadam roads, the correct sequence of operations after spreading coarse aggregates is (A) Dry rolling, wet rolling, application of screening and application of ... of filler (D) Dry rolling, application of screening, application of filler and wet rolling

Last Answer : Answer: Option C

Which of the following premix methods is used for base course? (A) Bituminous carpet (B) Mastic asphalt (C) Sheet asphalt (D) Bituminous bound macadam

Description : Which of the following premix methods is used for base course? (A) Bituminous carpet (B) Mastic asphalt (C) Sheet asphalt (D) Bituminous bound macadam

Last Answer : Answer: Option D

The desirable camber for straight roads with water bound macadam or gravel surface, is (A) 1 in 33 to 1 in 25 (B) 1 in 40 to 1 in 33 (C) 1 in 150 to 1 in 140 (D) 1 in 160 to 1 in 140

Description : The desirable camber for straight roads with water bound macadam or gravel surface, is (A) 1 in 33 to 1 in 25 (B) 1 in 40 to 1 in 33 (C) 1 in 150 to 1 in 140 (D) 1 in 160 to 1 in 140

Last Answer : Answer: Option B

Cement grouted pavement is classified as (A) Rigid pavement (B) Semi-rigid pavement (C) Flexible pavement (D) None of these

Description : Cement grouted pavement is classified as (A) Rigid pavement (B) Semi-rigid pavement (C) Flexible pavement (D) None of these

Last Answer : B

Newly constructed pavement with ordinary Portland cement attains its working strength after (A) 7 days (B) 14 days (C) 21 days (D) 28 days

Description : Newly constructed pavement with ordinary Portland cement attains its working strength after (A) 7 days (B) 14 days (C) 21 days (D) 28 days

Last Answer : Answer: Option D

Bottom-most component of a flexible pavement, is (A) Sub-grade (B) Sub-base (C) Base (D) Base course

Description : Bottom-most component of a flexible pavement, is (A) Sub-grade (B) Sub-base (C) Base (D) Base course

Last Answer : Answer: Option A

Minimum thickness of the base of a flexible pavement, is (A) 10 cm (B) 15 cm (C) 20 cm (D) 25 cm

Description : Minimum thickness of the base of a flexible pavement, is (A) 10 cm (B) 15 cm (C) 20 cm (D) 25 cm

Last Answer : Answer: Option A

The statement, regarding the size of stones used at the wearing surface. "The size of a stone used on a road must be in due proportion to the space occupied by a wheel of ordinary dimensions on a smooth level surface. The point of contact will be found to be longitudinal about 2.5 cm and everypiece of stone put into the road which exceeds 2.5 cm in any of its dimension is mischievous" was made by (A) Telford (B) Macadam (C) Tresguet (D) Sully

Description : The statement, regarding the size of stones used at the wearing surface. "The size of a stone used on a road must be in due proportion to the space occupied by a wheel of ordinary dimensions on a smooth ... dimension is mischievous" was made by (A) Telford (B) Macadam (C) Tresguet (D) Sully

Last Answer : Answer: Option B

For Indian conditions, the water bound macadam roads, are suitable if daily traffic does not exceed (A) 2000 tonnes (B) 2500 tonnes (C) 3000 tonnes (D) 3500 tonnes

Description : For Indian conditions, the water bound macadam roads, are suitable if daily traffic does not exceed (A) 2000 tonnes (B) 2500 tonnes (C) 3000 tonnes (D) 3500 tonnes

Last Answer : Answer: Option A

Pick up the incorrect statement from the following: (A) Tresguet did not provide the top camber for the drainage of surface water (B) Tresguet provided the top camber for the drainage of surface water (C) Telford provided two layers of stones in the central 5.4 m width and one layer was provided on the sides (D) Macadam provided a camber to the formation at the dug-up state, to drain percolated water

Description : Pick up the incorrect statement from the following: (A) Tresguet did not provide the top camber for the drainage of surface water (B) Tresguet provided the top camber for the drainage of surface ... (D) Macadam provided a camber to the formation at the dug-up state, to drain percolated water

Last Answer : Answer: Option A

Which of the following represents a carpet of sand-bitumen mix without coarse aggregates? (A) Mastic asphalt (B) Sheet asphalt (C) Bituminous carpet (D) Bituminous concrete

Description : Which of the following represents a carpet of sand-bitumen mix without coarse aggregates? (A) Mastic asphalt (B) Sheet asphalt (C) Bituminous carpet (D) Bituminous concrete

Last Answer : Answer: Option B

Percentage of free carbon in bitumen is (A) More than that in tar (B) Less than that in tar (C) Equal to that in tar(D) None of the above

Description : Percentage of free carbon in bitumen is (A) More than that in tar (B) Less than that in tar (C) Equal to that in tar (D) None of the above

Last Answer : Answer: Option B

Bitumen in (A) Solid state, is called asphalt (B) Semi fluid state, is called mineral tar (C) Fluid state, is called petroleum (D) All the above

Description : Bitumen in (A) Solid state, is called asphalt (B) Semi fluid state, is called mineral tar (C) Fluid state, is called petroleum (D) All the above

Last Answer : Answer: Option D

Bitumen completely dissolves in (A) Carbon bisulphide (B) Chloroform (C) Coal tar (D) All of these

Description : Bitumen completely dissolves in (A) Carbon bisulphide (B) Chloroform (C) Coal tar (D) All of these

Last Answer : Answer: Option D

Concrete contains (i)Siliceous aggregates, having higher coefficient of expansion (ii)Igneous aggregates, having intermediate coefficient of expansion (iii)Lime stones, having lowest coefficient of expansion [ A ] i and iii [ B ] ii and iii [ C ] i and ii [ D ] i, ii and iii

Description : Concrete contains (i)Siliceous aggregates, having higher coefficient of expansion (ii)Igneous aggregates, having intermediate coefficient of expansion (iii)Lime stones, having lowest coefficient of expansion [ A ] i and iii [ B ] ii and iii [ C ] i and ii [ D ] i, ii and iii

Last Answer : [ D ] i, ii and iii

Roughness index of roads, is expressed as (A) Size of the stone on the pavement (B) Number of patches on the pavement (C) Cumulative deformation of surface per horizontal distance (D) Type of the road surface

Description : Roughness index of roads, is expressed as (A) Size of the stone on the pavement (B) Number of patches on the pavement (C) Cumulative deformation of surface per horizontal distance (D) Type of the road surface

Last Answer : Answer: Option C

Describe stepwise construction procedure for water bound macadam roads.

Description : Describe stepwise construction procedure for water bound macadam roads.

Last Answer : The construction procedure of W.B.M. road is discussed below: 1. Preparation of subgrade : The subgrade is prepared to the required grade and camber. 2. Preparation of the base course : After preparing ... by rolling or tamping. 5. Open to traffic : After drying, the road is opened to traffic.

Bottom most layer of pavement is known as (A) Wearing course (B) Base course (C) Sub-base course (D) Sub-grade

Description : Bottom most layer of pavement is known as (A) Wearing course (B) Base course (C) Sub-base course (D) Sub-grade

Last Answer : Answer: Option D

The commonly used material in the manufacture of cement is (A) Sand stone (B) Slate (C) Lime stone (D) Graphite

Description : The commonly used material in the manufacture of cement is (A) Sand stone (B) Slate (C) Lime stone (D) Graphite

Last Answer : (C) Lime stone

Ordinary Portland cement is manufactured from (A) Lime stone and clay (B) Gypsum and lime (C) Pozzolana (D) Lime, pozzolana and clay

Description : Ordinary Portland cement is manufactured from (A) Lime stone and clay (B) Gypsum and lime (C) Pozzolana (D) Lime, pozzolana and clay

Last Answer : Answer: Option B

The commonly used raw material in the manufacture of cement, is (A) Slate (B) Sand stone (C) Lime stone (D) Basalt

Description : The commonly used raw material in the manufacture of cement, is (A) Slate (B) Sand stone (C) Lime stone (D) Basalt

Last Answer : Answer: Option C

The stone masonry of finely dressed stones laid in cement or lime, is (A) Random rubble masonry (B) Coursed rubble masonry (C) Dry rubble masonry (D) Ashlar masonry

Description : The stone masonry of finely dressed stones laid in cement or lime, is (A) Random rubble masonry (B) Coursed rubble masonry (C) Dry rubble masonry (D) Ashlar masonry

Last Answer : Answer: Option D

Calcareous and argillaceous materials used in manufacture of cement consists of (a) Lime stone (b) Chalk (c) Shales (d) All the above

Description : Calcareous and argillaceous materials used in manufacture of cement consists of (a) Lime stone (b) Chalk (c) Shales (d) All the above

Last Answer : (d) All the above

For given workability the grading requiring the least amount of water is one that gives (A) Greatest surface area for the given cement and aggregates (B) Least surface area for the given cement and aggregates (C) Least weight for the given cement and aggregates (D) Greatest weight for the given cement and aggregates

Description : For given workability the grading requiring the least amount of water is one that gives (A) Greatest surface area for the given cement and aggregates (B) Least surface area for the given cement ... weight for the given cement and aggregates (D) Greatest weight for the given cement and aggregates

Last Answer : Answer: Option A

Design of flexible pavement, involves (A) Wheel loads (B) Intensity of traffic (C) Climate of the region (D) Sub-grade conditions

Description : Design of flexible pavement, involves (A) Wheel loads (B) Intensity of traffic (C) Climate of the region (D) Sub-grade conditions

Last Answer : Answer: Option C

The method of design of flexible pavement as recommended by IRC is (A) Group index method (B) CBR method (C) Westergaard method (D) Benkelman beam method

Description : The method of design of flexible pavement as recommended by IRC is (A) Group index method (B) CBR method (C) Westergaard method (D) Benkelman beam method

Last Answer : Answer: Option B

Flexible pavement distribute the wheel load (A) Directly to sub-grade (B) Through structural action (C) Through a set of layers to the sub-grade (D) None of the above

Description : Flexible pavement distribute the wheel load (A) Directly to sub-grade (B) Through structural action (C) Through a set of layers to the sub-grade (D) None of the above

Last Answer : Answer: Option C

For constructing a terrazzo floor, Pick up the incorrect statement from the following: (A) A base course is prepared as in cement concrete flooring (B) A 32 mm thick layer of cement concrete (1 : 2 : 4) is laid on the base course and the surface is made smooth by trowelling (C) Glass strips are driven into the layer according to the pattern required (D) After final grinding is over, oxalic acid mixed with water is spread over and rubbed hard with soft material

Description : For constructing a terrazzo floor, Pick up the incorrect statement from the following: (A) A base course is prepared as in cement concrete flooring (B) A 32 mm thick layer of cement concrete ... final grinding is over, oxalic acid mixed with water is spread over and rubbed hard with soft material

Last Answer : Answer: Option B

Which of the following is not a binder for coal briquetting? (A) Coal tar (B) Bitumen (C) Molasses (D) None of these

Description : Which of the following is not a binder for coal briquetting? (A) Coal tar (B) Bitumen (C) Molasses (D) None of these

Last Answer : (D) None of these

Dolomite is a lime stone which contains carbonate of magnesia upto (A) 15 % (B) 20 % (C) 25 % (D) 45 %

Description : Dolomite is a lime stone which contains carbonate of magnesia upto (A) 15 % (B) 20 % (C) 25 % (D) 45 %

Last Answer : Answer: Option D

If the iron ore contains clay as an impurity, the flux added during calcination, is (A) Clay (B) Lime stone (C) Argillaceous iron ore (D) All the above

Description : If the iron ore contains clay as an impurity, the flux added during calcination, is (A) Clay (B) Lime stone (C) Argillaceous iron ore (D) All the above

Last Answer : Answer: Option B

The base material for distemper, is (A) Chalk (B) Lime (C) Lime putty (D) Cement wash

Description : The base material for distemper, is (A) Chalk (B) Lime (C) Lime putty (D) Cement wash

Last Answer : Answer: Option A

White cement contains less amount of ___________ [ A ] Lime [ B ] Silica [ C ] Alumina [ D ] Iron oxide

Description : White cement contains less amount of ___________ [ A ] Lime [ B ] Silica [ C ] Alumina [ D ] Iron oxide

Last Answer : [ D ] Iron oxide

When compared to ordinary Portland cement, Rapid hardening Portland cement contains ______________ amount of lime content [ A ] Equal [ B ] Greater [ C ] Lesser [ D ] Zero

Description : When compared to ordinary Portland cement, Rapid hardening Portland cement contains ______________ amount of lime content [ A ] Equal [ B ] Greater [ C ] Lesser [ D ] Zero

Last Answer : [ B ] Greater

The surface of a "desert pavement" is composed mainly of which of the following? w) loose sand x) sand and clay y) pebbles and boulders z) concrete and cement

Description : The surface of a "desert pavement" is composed mainly of which of the following? w) loose sand x) sand and clay y) pebbles and boulders z) concrete and cement

Last Answer : ANSWER: Y -- PEBBLES AND BOULDERS

Cement is usually a mixture of : (1) Calcium silicate and calcium aluminate (2) Calcium silicate and calcium ferrate (3) Calcium aluminate and calcium ferrate (4) Lime stone and silicon dioxide

Description : Cement is usually a mixture of : (1) Calcium silicate and calcium aluminate (2) Calcium silicate and calcium ferrate (3) Calcium aluminate and calcium ferrate (4) Lime stone and silicon dioxide 

Last Answer : Calcium silicate and calcium aluminate

Concrete containing (A) Siliceous aggregates, has higher co-efficient of expansion (B) Igneous aggregates, has intermediate coefficient of expansion (C) Lime stones, has lowest co-efficient of expansion (D) All the above

Description : Concrete containing (A) Siliceous aggregates, has higher co-efficient of expansion (B) Igneous aggregates, has intermediate coefficient of expansion (C) Lime stones, has lowest co-efficient of expansion (D) All the above

Last Answer : Answer: Option D

In cement concrete pavements, tensile stress is due to: (A) Bending or deflection under wheel loads (B) Difference in temperature of the top and bottom of pavement (C) Contraction of slab during falling temperature (D) All the above

Description : In cement concrete pavements, tensile stress is due to: (A) Bending or deflection under wheel loads (B) Difference in temperature of the top and bottom of pavement (C) Contraction of slab during falling temperature (D) All the above

Last Answer : Answer: Option D

For the design of cement concrete pavement for corner loading, Indian Road Congress recommends the use of (A) Westergaard's formula (B) Kelly's formula (C) Goldbeck's formula (D) Picker's formula

Description : For the design of cement concrete pavement for corner loading, Indian Road Congress recommends the use of (A) Westergaard's formula (B) Kelly's formula (C) Goldbeck's formula (D) Picker's formula

Last Answer : Answer: Option D

If d is the economic designed depth of a slab, the thickness of the cement concrete pavement slab at interior, is kept (A) 1.275 d (B) 1.125 d (C) 0.85 d (D) 0.75 d

Description : If d is the economic designed depth of a slab, the thickness of the cement concrete pavement slab at interior, is kept (A) 1.275 d (B) 1.125 d (C) 0.85 d (D) 0.75 d

Last Answer : Answer: Option C

Pick up the incorrect statement from the following: (A) The width of the wall is constructed thicker at the base in a stepped fashion (B) A long vertical load transferring concrete structure is called a concrete pile (C) In pile which transfers the load to the soil by the friction between the pile and the surrounding soil is called friction pile (D) The pile which transfers the load to a hard rock bed at certain depth is called load bearing

Description : Pick up the incorrect statement from the following: (A) The width of the wall is constructed thicker at the base in a stepped fashion (B) A long vertical load transferring concrete structure is ... ) The pile which transfers the load to a hard rock bed at certain depth is called load bearing

Last Answer : Answer: Option D

Discuss the causes of failure in flexible and rigid pavement.

Description : Discuss the causes of failure in flexible and rigid pavement.

Last Answer : Causes of failure in flexible pavement: The following are the causes of failure in flexible pavement: 1) Ineffective road surface drainage system such as, (i) inadequate cross slope of the ... joints or even non-uniform settlement of the pavement slabs resulting in deterioration in riding quality.