Rate of heat transfer by vaporisation from pools of water is affected by the (A) Nature of heating surface and distribution of bubbles (B) Surface tension of water (C) Viscosity of water (D) All (A), (B) and (C)

Rate of heat transfer by vaporisation from pools of water is affected by

the

(A) Nature of heating surface and distribution of bubbles

(B) Surface tension of water

(C) Viscosity of water

(D) All (A), (B) and (C)

by

1 Answer

Answer :

(D) All (A), (B) and (C)

by

Related questions

Pick out the wrong statement. (A) In case of heat transfer by purely forced convection, GR /Re 2 ≤ 1 (B) The equivalent diameter of heat transfer for a duct of square cross￾section (having each side as 'x') is equal to 4x (C) Distillation process is not the same as evaporation (D) The effectiveness of nucleate boiling depends basically on the ease with which the bubbles are formed and detached from the heating surface

Description : Pick out the wrong statement. (A) In case of heat transfer by purely forced convection, GR /Re 2 ≤ 1 (B) The equivalent diameter of heat transfer for a duct of ... nucleate boiling depends basically on the ease with which the bubbles are formed and detached from the heating surface

Last Answer : (B) The equivalent diameter of heat transfer for a duct of square cross￾section (having each side as 'x') is equal to 4x

Small bubbles are perfectly spherical because of – (1) Gravity (2) Pressure (3) Viscosity (4) Surface tension

Description : Small bubbles are perfectly spherical because of – (1) Gravity (2) Pressure (3) Viscosity (4) Surface tension

Last Answer : (4) Surface tension Explanation: Surface tension is responsible for the shape of liquid droplets. Although easily deformed, droplets of water tend to be pulled into a spherical shape by the cohesive ... shape minimizes the necessary "wall tension" of the surface layer according to Laplace's law.

Small bubbles are perfectly spherical because of (1) Gravity (2) Pressure (3) Viscosity (4) Surface tension

Description : Small bubbles are perfectly spherical because of (1) Gravity (2) Pressure (3) Viscosity (4) Surface tension

Last Answer : Surface tension

Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Description : Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Last Answer : (B) High vapour pressure

Entrainer used in Azeotropic distillation should (A) Form a low boiling azeotrope with one of the constituents of the mixture (B) Form a new azeotrope of low relative volatility with one of the constituents of the mixture (C) Have high latent heat of vaporisation (D) Have high viscosity to provide high tray efficiency

Description : Entrainer used in Azeotropic distillation should (A) Form a low boiling azeotrope with one of the constituents of the mixture (B) Form a new azeotrope of low relative volatility with one of the ... (C) Have high latent heat of vaporisation (D) Have high viscosity to provide high tray efficiency

Last Answer : (A) Form a low boiling azeotrope with one of the constituents of the mixture

High __________ is an undesirable property for a good refrigerant. (A) Specific heat (B) Latent heat of vaporisation (C) Viscosity (D) Specific vapor volume

Description : High __________ is an undesirable property for a good refrigerant. (A) Specific heat (B) Latent heat of vaporisation (C) Viscosity (D) Specific vapor volume

Last Answer : (C) Viscosity

ick out the undesirable property for a good refrigerant. (A) High thermal conductivity (B) Low freezing point (C) Large latent heat of vaporisation (D) High viscosity

Description : ick out the undesirable property for a good refrigerant. (A) High thermal conductivity (B) Low freezing point (C) Large latent heat of vaporisation (D) High viscosity

Last Answer : (D) High viscosity

Fluid motion in the natural convection heat transfer between a solid surface and a fluid in contact with it, results from the (A) Existence of thermal boundary layer (B) Temperature gradient produced due to density difference (C) Buoyancy of the bubbles produced at active nucleation site (D) None of these

Description : Fluid motion in the natural convection heat transfer between a solid surface and a fluid in contact with it, results from the (A) Existence of thermal boundary layer (B) Temperature gradient produced ... difference (C) Buoyancy of the bubbles produced at active nucleation site (D) None of these

Last Answer : (D) None of these

When vaporisation takes place directly at the heating surface, it is called (A) Film boiling (B) Nucleate boiling (C) Vapour binding (D) None of these

Description : When vaporisation takes place directly at the heating surface, it is called (A) Film boiling (B) Nucleate boiling (C) Vapour binding (D) None of these

Last Answer : (B) Nucleate boiling

In sub-cooled boiling, (A) Temperature of the heating surface is less than the boiling point of the liquid (B) Temperature of the heating surface is more than the boiling point of the liquid (C) Bubbles from heating surface are absorbed by the mass of the liquid (D) Very large vapour space is necessary

Description : In sub-cooled boiling, (A) Temperature of the heating surface is less than the boiling point of the liquid (B) Temperature of the heating surface is more than the boiling point of the liquid (C) ... from heating surface are absorbed by the mass of the liquid (D) Very large vapour space is necessary

Last Answer : (B) Temperature of the heating surface is more than the boiling point of the liquid

What is the main disadvantage of Lamont boiler ? a. Less flexible in design b. Low heat transfer rate c. Formation of bubbles d. Low steam generation capacity

Description : What is the main disadvantage of Lamont boiler ? a. Less flexible in design b. Low heat transfer rate c. Formation of bubbles d. Low steam generation capacity

Last Answer : c. Formation of bubbles

Which of the following is the most controlling factor for the rate of bubble detachment from the hot solid surface? (A) Liquid density (B) Liquid viscosity (C) Hot surface temperature (D) Interfacial tension

Description : Which of the following is the most controlling factor for the rate of bubble detachment from the hot solid surface? (A) Liquid density (B) Liquid viscosity (C) Hot surface temperature (D) Interfacial tension

Last Answer : (D) Interfacial tension

In a cooling tower, water becomes cool by (A) Loosing sensible heat (B) Heat transfer to surroundings (C) Vaporisation due to heat loss to air (D) Loosing latent heat

Description : In a cooling tower, water becomes cool by (A) Loosing sensible heat (B) Heat transfer to surroundings (C) Vaporisation due to heat loss to air (D) Loosing latent heat

Last Answer : (A) Loosing sensible heat

Pick out the wrong statement. (A) The condensing film co-efficient is about 3 times lower for vertical condenser as compared to the equivalent horizontal condenser for identical situation (B) Film co-efficient for vaporisation decreases as a result of vapor binding (C) In industrial practice, sub-cooling of condensate is required, when thecondensate is a volatile liquid and is to be transferred for storage(D) Overall heat transfer co-efficient in a heat exchanger is controlled by thevalue of the film co-efficient, which is higher

Description : Pick out the wrong statement. (A) The condensing film co-efficient is about 3 times lower for vertical condenser as compared to the equivalent horizontal condenser for identical situation ( ... in a heat exchanger is controlled by the value of the film co-efficient, which is higher

Last Answer : (D) Overall heat transfer co-efficient in a heat exchanger is controlled by the value of the film co-efficient, which is higher

Pick out the wrong statement. (A) Heat transfer by radiation cannot occur across an absolute volume (B) In case of a shell and tube heat exchanger, the pressure drop through the shell is proportional to the number of times the fluid crosses the bundle between baffles (C) Propagation velocity for travel of heat radiation through vacuum is equal to the velocity of the light (D) The amount of heat involved in the condensation or vaporisation of 1 kg of a fluid is the same

Description : Pick out the wrong statement. (A) Heat transfer by radiation cannot occur across an absolute volume (B) In case of a shell and tube heat exchanger, the pressure drop through the shell is ... The amount of heat involved in the condensation or vaporisation of 1 kg of a fluid is the same

Last Answer : (A) Heat transfer by radiation cannot occur across an absolute volume

Name the process by which bubbles from liquid are formed? (1) Effervescence (2) Surface Tension (3) Surface Energy (4) Degasification

Description : Name the process by which bubbles from liquid are formed? (1) Effervescence (2) Surface Tension (3) Surface Energy (4) Degasification

Last Answer : (1) Effervescence Explanation: Effervescence is the escape of gas from an aqueous solution and the foaming or fizzing that results from a release of the gas. It leads to the formation of gas ... as soft drinks, the visible bubbles are produced by the escape from solution of the dissolved gas.

Name the process by which bubbles from liquid are formed? (1) Effervescence (2) Surface Tension (3) Surface Energy (4) Degasification

Description : Name the process by which bubbles from liquid are formed? (1) Effervescence (2) Surface Tension (3) Surface Energy (4) Degasification

Last Answer : Effervescence

Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than that of the damp material (C) Ratio of its capacity to economy equals the steam consumption in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation

Description : Pick out the wrong statement. (A) Bubble size increases with the dynamic viscosity of the liquid in case of nucleate pool boiling (B) Thermal conductivity of a dry material is more than ... in kg/hr in an evaporator (D) Vaporisation of organic substances in evaporator mostly causes foam formation

Last Answer : (B) Thermal conductivity of a dry material is more than that of the damp material

(4) less soluble in blood than nitrogen at high pressure Explanation: Deep-sea divers have their oxygen supply mixed with helium in order to avoid the toxic nature of oxygen under extreme pressures. The Helium atom is much smaller than the Nitrogen molecule, has a smaller electron cloud and is less polarizable. It, therefore is less soluble in blood than nitrogen and prevents the formation of nitrogen bubbles in blood which blocks blood flow as the diver comes to the surface of the sea from underwater.

Description : (4) less soluble in blood than nitrogen at high pressure Explanation: Deep-sea divers have their oxygen supply mixed with helium in order to avoid the toxic nature of oxygen under extreme pressures. The ... blood which blocks blood flow as the diver comes to the surface of the sea from underwater.

Last Answer : The chemical bahaviour of an atom depends upon - (1) the number of protons in its nucleus (2) the number of neutrons in the nucleus (3) the number of electrons orbiting around the nucleus (4) the number of nucleons in the nucleus

Red phosphorous is changed into white phosphorous by (A) Heating in presence of light (B) Melting under pressure (C) Vaporisation followed by condensation (D) None of these

Description : Red phosphorous is changed into white phosphorous by (A) Heating in presence of light (B) Melting under pressure (C) Vaporisation followed by condensation (D) None of these

Last Answer : (C) Vaporisation followed by condensation

It is desired to concentrate a 20% salt solution (20 kg of salt in 100 kg of solution) to a 30% salt solution in an evaporator. Consider a feed of 300 kg/min at 30°C. The boiling point of the solution is 110°C, the latent heat of vaporisation is 2100 kJ/kg and the specific heat of the solution is 4 kJ/kg.K. The rate at which the heat has to be supplied in (kJ/min) to the evaporator is (A) 3.06 × 10 5 (B) 6.12 × 10 5 (C) 7.24 × 10 5 (D) 9.08 × 10

Description : It is desired to concentrate a 20% salt solution (20 kg of salt in 100 kg of solution) to a 30% salt solution in an evaporator. Consider a feed of 300 kg/min at 30°C. The boiling point of the solution is 110°C, the latent heat of ... 3.06 10 5 (B) 6.12 10 5 (C) 7.24 10 5 (D) 9.08 10

Last Answer : (A) 3.06 × 10

Pick out the wrong statement. (A) Mechanical agitation is required, if the system has low interfacial tension (B) Sieve tray towers are generally used for systems having low interfacial tension (C) When Henry's law constant is very small, then the mass transfer rate is controlled by the gas film resistance (D) Taylor-Prandtl analogy for heat and mass transfer considers the transfer through both laminar and turbulent layers

Description : Pick out the wrong statement. (A) Mechanical agitation is required, if the system has low interfacial tension (B) Sieve tray towers are generally used for systems having low ... Prandtl analogy for heat and mass transfer considers the transfer through both laminar and turbulent layers

Last Answer : (A) Mechanical agitation is required, if the system has low interfacial tension

Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger, the shell pressure drop is maximum for orifice baffles (C) S.I. unit of fouling factor is Watt/m2 .°K (D) Longitudinal fins are used in extended surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Description : Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger ... surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Last Answer : (C) S.I. unit of fouling factor is Watt/m2 .°K

Heat exchangers operating, when the asymptotic range is reached, (A) Provide very large heat transfer co-efficient (B) Results in making part of the heating surface inactive (C) Results in abruptly increased velocity (D) None of these

Description : Heat exchangers operating, when the asymptotic range is reached, (A) Provide very large heat transfer co-efficient (B) Results in making part of the heating surface inactive (C) Results in abruptly increased velocity (D) None of these

Last Answer : (B) Results in making part of the heating surface inactive

reduction in thermal resistance during heat transfer does not occur in the (A) Convection heat transfer by stirring the fluid and cleaning the heating surface (B) Conduction heat transfer by reduction in the material thickness and increase in the thermal conductivity (C) Radiation heat transfer by increasing the temperature and reducing the emissivity (D) None of these

Description : reduction in thermal resistance during heat transfer does not occur in the (A) Convection heat transfer by stirring the fluid and cleaning the heating surface (B) Conduction heat transfer by ... Radiation heat transfer by increasing the temperature and reducing the emissivity (D) None of these

Last Answer : Option C

Power consumption during turbulent flow in agitation tank is proportional to the __________ of the liquid. (A) Viscosity (B) Thermal conductivity(C) Surface tension(D) Density

Description : Power consumption during turbulent flow in agitation tank is proportional to the __________ of the liquid. (A) Viscosity (B) Thermal conductivity (C) Surface tension (D) Density

Last Answer : (D) Density

Dimension of mass diffusivity is the same as that of (A) Kinematic viscosity (B) Dynamic viscosity (C) Surface tension (D) Pressure

Description : Dimension of mass diffusivity is the same as that of (A) Kinematic viscosity (B) Dynamic viscosity (C) Surface tension (D) Pressure

Last Answer : (A) Kinematic viscosity

The fluid property which matters for falling rain drops to acquire spherical shape is its (A) Pressure (B) Height of descend (C) Viscosity (D) Surface tension

Description : The fluid property which matters for falling rain drops to acquire spherical shape is its (A) Pressure (B) Height of descend (C) Viscosity (D) Surface tension

Last Answer : (D) Surface tension

Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent) varies linearly as the radial distance (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Description : Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent ... of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid

Last Answer : (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity

Which of the following properties of a fluid is responsible for offering resistance to shear? (A) Surface tension (B) Viscosity (C) Specific gravity (D) All (A), (B), and (C)

Description : Which of the following properties of a fluid is responsible for offering resistance to shear? (A) Surface tension (B) Viscosity (C) Specific gravity (D) All (A), (B), and (C)

Last Answer : (B) Viscosity

The fluid property, due to which, mercury does not wet the glass is (A) Surface tension (B) Viscosity (C) Cohesion (D) Adhesion

Description : The fluid property, due to which, mercury does not wet the glass is (A) Surface tension (B) Viscosity (C) Cohesion (D) Adhesion

Last Answer : (A) Surface tension

The fluid property, due to which, mercury does not wet the glass is (A) Surface tension (B) Viscosity (C) Cohesion (D) Adhesion

Description : The fluid property, due to which, mercury does not wet the glass is (A) Surface tension (B) Viscosity (C) Cohesion (D) Adhesion

Last Answer : (A) Surface tension

The buoyant force acting on a floating body is dependent on the (A) Viscosity of the liquid (B) Weight of the liquid displaced (C) Depth of immersion of the body (D) Surface tension of the liquid

Description : The buoyant force acting on a floating body is dependent on the (A) Viscosity of the liquid (B) Weight of the liquid displaced (C) Depth of immersion of the body (D) Surface tension of the liquid

Last Answer : (B) Weight of the liquid displaced

Existence of boundary layer in fluid flow is because of the (A) Surface tension (B) Fluid density (C) Fluid viscosity (D) Gravity forces

Description : Existence of boundary layer in fluid flow is because of the (A) Surface tension (B) Fluid density (C) Fluid viscosity (D) Gravity forces

Last Answer : (C) Fluid viscosity

The intensive properties are (A) Molar volume, density, viscosity and boiling point (B) Refractive index and surface tension (C) Both (A) and (B) (D) None of these

Description : The intensive properties are (A) Molar volume, density, viscosity and boiling point (B) Refractive index and surface tension (C) Both (A) and (B) (D) None of these

Last Answer : (C) Both (A) and (B)

Spherical shape of mercury droplets is due to its (A) High viscosity (B) Low surface tension (C) High density (D) High surface tension

Description : Spherical shape of mercury droplets is due to its (A) High viscosity (B) Low surface tension (C) High density (D) High surface tension

Last Answer : Option D

Pressure exerted by a liquid depends upon its (A) Surface tension (B) Density (C) Viscosity

Description : Pressure exerted by a liquid depends upon its (A) Surface tension (B) Density (C) Viscosity

Last Answer : Option B

Pick out the wrong statement. (A) 'Green acid' is the other name of phosphoric acid produced by the reaction of phosphate rock & sulphuric acid (B) Chemically unreactive nature of red phosphorous is due to its polymeric structure (C) Red phosphorous is the most reactive allotropic form of phosphorous (D) Red phosphorous, which is used in the manufacture of safety matches, is converted into white phosphorous by vaporisation followed by condensation

Description : Pick out the wrong statement. (A) 'Green acid' is the other name of phosphoric acid produced by the reaction of phosphate rock & sulphuric acid (B) Chemically unreactive nature of ... in the manufacture of safety matches, is converted into white phosphorous by vaporisation followed by condensation

Last Answer : (C) Red phosphorous is the most reactive allotropic form of phosphorous

A coalescer in a mixer-settler liquid-liquid extraction column (A) Comprises of thin bed of substances of extended surface having high porosity (B) Helps in increasing the bubble size entering the settler (C) Helps in increasing the settling rate of the bubbles (D) All 'a', 'b', & 'c'

Description :  A coalescer in a mixer-settler liquid-liquid extraction column (A) Comprises of thin bed of substances of extended surface having high porosity (B) Helps in increasing the bubble size entering the settler ... increasing the settling rate of the bubbles (D) All 'a', 'b', & 'c'

Last Answer : (D) All 'a', 'b', & 'c'

Diffusion co-efficient generally depends upon the temperature, pressure & the nature of the components of the system. Its dimension is not the same as that of the (A) Mass transfer co-efficient (B) Thermal diffusivity (C) Kinematic viscosity (D) Volumetric diffusivity

Description : Diffusion co-efficient generally depends upon the temperature, pressure & the nature of the components of the system. Its dimension is not the same as that of the (A) Mass transfer co-efficient (B) Thermal diffusivity (C) Kinematic viscosity (D) Volumetric diffusivity

Last Answer : (A) Mass transfer co-efficient

The rate of heat transfer is a product of overall heat transfer co￾efficient, the difference in temperature and the (A) Heating volume (B) Heat transfer area (C) Nusselt number (D) None of these

Description : The rate of heat transfer is a product of overall heat transfer co￾efficient, the difference in temperature and the (A) Heating volume (B) Heat transfer area (C) Nusselt number (D) None of these

Last Answer : (B) Heat transfer area

Materials for rain-proof coats and tents owe their water proof properties to _____? A. Surface tension B. Viscosity C. Elasticity D. Specific gravity

Description : Materials for rain-proof coats and tents owe their water proof properties to _____? A. Surface tension B. Viscosity C. Elasticity D. Specific gravity

Last Answer : ANSWER: A

A fresh egg sinks in pure water but floats in salty water. This is because (a) Saline water is denser than pure water (b) Saline water is lighter than pure water (c) The viscosity of saline water is higher than that of pure water (d) The surface tension of saline water is lower than that of pure water

Description : A fresh egg sinks in pure water but floats in salty water. This is because (a) Saline water is denser than pure water (b) Saline water is lighter than pure water (c) The viscosity of saline water ... than that of pure water (d) The surface tension of saline water is lower than that of pure water

Last Answer : Ans:(a)

A small drop of oil spreads over water because : (1) oil has a higher surface tension (2) water has a higher surface tension (3) oil has a higher viscosity (4) water has a higher viscosity

Description : A small drop of oil spreads over water because : (1) oil has a higher surface tension (2) water has a higher surface tension (3) oil has a higher viscosity (4) water has a higher viscosity

Last Answer : (2) water has a higher surface tension Explanation: Dispersion is used to separate a beam of white light into its constituent spectrum of colours. This phenomenon leads to rainbow.

A needle or a pin floats on the surface of water because of – (1) Surface tension (2) Surface energy (3) Viscosity (4) Adhesive force

Description : A needle or a pin floats on the surface of water because of – (1) Surface tension (2) Surface energy (3) Viscosity (4) Adhesive force

Last Answer : (1) Surface tension Explanation: The pin or needle floats because of an invisible elastic skin on the surface of the water. This elastic skin is called surface tension. Surface tension of the water leads to forces strong enough to support the needle's weight.

A solid needle placed horizon-tally on the surface of the water floats due to – (1) capillary action (2) water pressure (3) surface tension of water (4) viscosity of water

Description : A solid needle placed horizon-tally on the surface of the water floats due to – (1) capillary action (2) water pressure (3) surface tension of water (4) viscosity of water

Last Answer : (3) surface tension of water Explanation: A solid needle placed horizontally on the surface of water floats due to surface tension of water.

Pieces of camphor placed on water move about rapidly. This is because of - (1) diffusion (2) viscosity (3) surface tension (4) capillarity

Description : Pieces of camphor placed on water move about rapidly. This is because of - (1) diffusion (2) viscosity (3) surface tension (4) capillarity

Last Answer : (3) surface tension Explanation: The Camphor slowly dissolves in the water lowering the latter's surface tension in the immediate neighbourhood. When after sometime the whole surface settles for the reduced tension, the movement of the camphor too short.

Alcohol is more volatile than water because ______ is lower than water. (1) its boiling point (2) its density (3) its viscosity (4) its surface tension

Description : Alcohol is more volatile than water because ______ is lower than water. (1) its boiling point (2) its density (3) its viscosity (4) its surface tension

Last Answer : (1) its boiling point Explanation: Drinking alcohol (ethanol) and a lot of other simple alcohols are more volatile than water because they are less polar. Thus, alcohol has higher vapor pres-sure and ... C is what makes it possible to distill alcohol into a much stronger solution than wine or beer.

The hair of shaving brush clings together when removed from water due to – (1) Surface tension (2) Viscosity (3) Elasticity (4) Friction

Description : The hair of shaving brush clings together when removed from water due to – (1) Surface tension (2) Viscosity (3) Elasticity (4) Friction

Last Answer : (1) Surface tension Explanation: Surface tension is a contractive tendency of the surface of a liquid that allows it to resist an external force. It is revealed, for example, in the floating of ... is caused by cohesion of similar molecules, and is responsible for many of the behaviors of liquids.

Water drops are spherical because of - (1) viscosity (2) density (3) polarity (4) surface tension

Description : Water drops are spherical because of - (1) viscosity (2) density (3) polarity (4) surface tension

Last Answer : (4) surface tension Explanation: Surface tension is responsible for the shape of liquid droplets. Although easily deformed, droplets of water tend to be pulled into a spherical shape by ... absence of other forces, including gravity, drops of virtually all liquids would be approximately spherical.