Diffusion co-efficient generally depends upon the temperature, pressure & the nature of the components of the system. Its dimension is not the same as that of the (A) Mass transfer co-efficient (B) Thermal diffusivity (C) Kinematic viscosity (D) Volumetric diffusivity

Diffusion co-efficient generally depends upon the temperature,
pressure & the nature of the components of the system. Its dimension is not
the same as that of the
(A) Mass transfer co-efficient
(B) Thermal diffusivity
(C) Kinematic viscosity
(D) Volumetric diffusivity
by

1 Answer

Answer :

(A) Mass transfer co-efficient
by

Related questions

Which of the following has the same dimension as mass diffusivity? (A) Momentum flux (B) Kinematic viscosity (C) Thermal diffusivity (D) Both (B) and (C)

Description : Which of the following has the same dimension as mass diffusivity? (A) Momentum flux (B) Kinematic viscosity (C) Thermal diffusivity (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Dimension of mass diffusivity is the same as that of (A) Kinematic viscosity (B) Dynamic viscosity (C) Surface tension (D) Pressure

Description : Dimension of mass diffusivity is the same as that of (A) Kinematic viscosity (B) Dynamic viscosity (C) Surface tension (D) Pressure

Last Answer : (A) Kinematic viscosity

Which of the following is not dimension-less? (A) Froude number (B) Kinematic viscosity (C) Pressure co-efficient (D) None of these

Description : Which of the following is not dimension-less? (A) Froude number (B) Kinematic viscosity (C) Pressure co-efficient (D) None of these

Last Answer : (B) Kinematic viscosity

Which of the following is not a dimension-less parameter? (A) Pressure-co-efficient (B) Froude number (C) Kinematic viscosity (D) Weber number

Description : Which of the following is not a dimension-less parameter? (A) Pressure-co-efficient (B) Froude number (C) Kinematic viscosity (D) Weber number

Last Answer : (C) Kinematic viscosity

The dimension of diffusivity is same as that of the (A) Density (B) Molal concentration (C) Kinematic viscosity (D) Velocity head

Description : The dimension of diffusivity is same as that of the (A) Density (B) Molal concentration (C) Kinematic viscosity (D) Velocity head

Last Answer : (C) Kinematic viscosity

Wetted wall tower experiment determines the (A) Molal diffusivity (B) Volumetric co-efficient (C) Mass transfer co-efficient (D) None of these

Description : Wetted wall tower experiment determines the (A) Molal diffusivity (B) Volumetric co-efficient (C) Mass transfer co-efficient (D) None of these

Last Answer : (C) Mass transfer co-efficient

Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads (D) Fanning friction factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads

Which of the following is not a dimension-less group used in catalysis? (Where, D = dispersion co-efficient, cm2 /sec.D1 = diffusion co-efficient; cm2 /sec L = length of the reactor, cm t = time, sec, v = volumetric flow rate, cm3 /sec. V = volume, cm3 .) (A) Reactor dispersion number (D/vL) (B) Reduced time (vt/V) (C) Thiele modulus L √(k/D1 ) (D) None of these

Description : Which of the following is not a dimension-less group used in catalysis? (Where, D = dispersion co-efficient, cm2 /sec.D1 = diffusion co-efficient; cm2 /sec L = length of the reactor, cm t = time, sec, v = volumetric ... (D/vL) (B) Reduced time (vt/V) (C) Thiele modulus L √(k/D1 ) (D) None of these

Last Answer : (D) None of these

In fluid flow, and heat and mass transfer, one encounters (i) kinematic velocity (μ), (ii) molecular diffusivity (θ) and thermal diffusivity (α). The units of these quantities are. (A) μ , α and θ all have units of m/s (B) μ , α and θ all have units of m2/s (C) α and θ have units of m2/s, while μ has unit of m/s (D) α and θ have units of m/s, while μ has unit of m2/s

Description : In fluid flow, and heat and mass transfer, one encounters (i) kinematic velocity (μ), (ii) molecular diffusivity (θ) and thermal diffusivity (α). The units of these quantities are. (A) μ , α and θ all have units of m/ ... μ has unit of m/s (D) α and θ have units of m/s, while μ has unit of m2/s

Last Answer : Option C

The ratio of kinematic viscosity to thermal diffusivity is called the __________ number. (A) Peclet (B) Prandtl (C) Stanton (D) Nusselt

Description : The ratio of kinematic viscosity to thermal diffusivity is called the __________ number. (A) Peclet (B) Prandtl (C) Stanton (D) Nusselt

Last Answer : (B) Prandtl

The co-efficient of performance (COP) of a refrigerating system, which is its index of performance, is defined as the ratio of useful refrigeration to the net work. The units of __________ and COP are the same. (A) Kinematic viscosity (B) Work (C) Temperature (D) None of these

Description : The co-efficient of performance (COP) of a refrigerating system, which is its index of performance, is defined as the ratio of useful refrigeration to the net work. The units of __________ and COP are the same. (A) Kinematic viscosity (B) Work (C) Temperature (D) None of these

Last Answer : (D) None of these

Diffusion co-efficient of a metal in a solid solution depends upon its (A) Composition (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Diffusion co-efficient of a metal in a solid solution depends upon its (A) Composition (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Description : Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Last Answer : (B) High vapour pressure

Heat transfer rate per unit area is called (A) Thermal conductivity (B) Heat flux (C) Heat transfer co-efficient (D) Thermal diffusivity

Description : Heat transfer rate per unit area is called (A) Thermal conductivity (B) Heat flux (C) Heat transfer co-efficient (D) Thermal diffusivity

Last Answer : (B) Heat flux

In Fourier's law, the proportionality constant is called the (A) Heat transfer co-efficient (B) Thermal diffusivity (C) Thermal conductivity (D) Stefan-Boltzmann constant

Description : In Fourier's law, the proportionality constant is called the (A) Heat transfer co-efficient (B) Thermal diffusivity (C) Thermal conductivity (D) Stefan-Boltzmann constant

Last Answer : (C) Thermal conductivity

The binary diffusivity in gases does not depend upon the (A) Pressure (B) Temperature (C) Nature of the components (D) None of these

Description : The binary diffusivity in gases does not depend upon the (A) Pressure (B) Temperature (C) Nature of the components (D) None of these

Last Answer : (D) None of these

Nusselt number/Biot number varies (A) Inversely with thermal conductivity (B) Directly with heat transfer co-efficient (C) Directly with thermal conductivity (D) Inversely with the dimension of the solid

Description : Nusselt number/Biot number varies (A) Inversely with thermal conductivity (B) Directly with heat transfer co-efficient (C) Directly with thermal conductivity (D) Inversely with the dimension of the solid

Last Answer : (A) Inversely with thermal conductivity

Mass transfer co-efficient (K) and diffusivity (D) are related according to film theory as (A) K ∝ D (B) K ∝√D (C) K ∝ D1.5 (D) K ∝ D

Description : Mass transfer co-efficient (K) and diffusivity (D) are related according to film theory as (A) K ∝ D (B) K ∝√D (C) K ∝ D1.5 (D) K ∝ D

Last Answer : (A) K ∝ D

Mass transfer co-efficient 'K' according to penetration theory varies with mass diffusivity as (A) D0.5 (B) D (C) 1/D (D) D1.5

Description : Mass transfer co-efficient 'K' according to penetration theory varies with mass diffusivity as (A) D0.5 (B) D (C) 1/D (D) D1.5

Last Answer : (A) D0.5

Penetration theory relates the average mass transfer co-efficient (K) with diffusivity (D) as (A) K ∝D (B) K ∝√D (C) K ∝D1.5 (D) K ∝D

Description : Penetration theory relates the average mass transfer co-efficient (K) with diffusivity (D) as (A) K ∝D (B) K ∝√D (C) K ∝D1.5 (D) K ∝D

Last Answer : (B) K ∝√D

The mass transfer co-efficient for a solid sphere of radius 'a' dissolving in a large volume of quiescent liquid, in which ‘D’ is the diffusivity of solute, is (A) D/a (B) D/2a (C) Proportional to √D (D) Dependent on the Reynolds number

Description : The mass transfer co-efficient for a solid sphere of radius 'a' dissolving in a large volume of quiescent liquid, in which ‘D’ is the diffusivity of solute, is (A) D/a (B) D/2a (C) Proportional to √D (D) Dependent on the Reynolds number

Last Answer : (D) Dependent on the Reynolds number

The drag co-efficient for a bacterium moving in water at 1 mm/s, will be of the following order of magnitude (assume size of the bacterium to be 1 micron and kinematic viscosity of water to be 10 -6m2 /s). (A) 24000 (B) 24 (C) 0.24(D) 0.44

Description : The drag co-efficient for a bacterium moving in water at 1 mm/s, will be of the following order of magnitude (assume size of the bacterium to be 1 micron and kinematic viscosity of water to be 10 -6m2 /s). (A) 24000 (B) 24 (C) 0.24(D) 0.44

Last Answer : (D) 0.44

Heat transfer by natural convection is enhanced in system with (A) High viscosity (B) High co-efficient of thermal expansio

Description : Heat transfer by natural convection is enhanced in system with (A) High viscosity (B) High co-efficient of thermal expansio

Last Answer : (B) High co-efficient of thermal expansion

In case of liquid-liquid binary diffusion, diffusivity of one constituent into another is not dependent on the (A) Temperature and pressure (B) Concentration (C) Nature of the constituents (D) None of these

Description : In case of liquid-liquid binary diffusion, diffusivity of one constituent into another is not dependent on the (A) Temperature and pressure (B) Concentration (C) Nature of the constituents (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement. (A) Mass transfer co-efficient does not account for gas-liquid diffusion (B) Diffusion co-efficient and mass transfer co-efficient are not same in any mass transfer operation

Description : Pick out the wrong statement. (A) Mass transfer co-efficient does not account for gas-liquid diffusion (B) Diffusion co-efficient and mass transfer co-efficient are not same in any mass transfer operation

Last Answer : (A) Mass transfer co-efficient does not account for gas-liquid diffusion

The dimension of kinematic viscosity is(A) ML -2T -1 (B) L 2T -1 (C) ML -2T -2 (D) None of these

Description : The dimension of kinematic viscosity is (A) ML -2T -1 (B) L 2T -1 (C) ML -2T -2 (D) None of these

Last Answer : (B) L 2T -1

Experimental determination of __________ is done by wetted wall column method. (A) Diffusion co-efficient (B) Mass transfer co-efficient (C) NTU (D) None of these

Description : Experimental determination of __________ is done by wetted wall column method. (A) Diffusion co-efficient (B) Mass transfer co-efficient (C) NTU (D) None of these

Last Answer : (B) Mass transfer co-efficient

With increase in temperature, the rate of leaching increases, because the (A) Diffusivity of solute increases (B) Viscosity of solvent decreases (C) Thermal conductivity of solute increases (D) None of these

Description : With increase in temperature, the rate of leaching increases, because the (A) Diffusivity of solute increases (B) Viscosity of solvent decreases (C) Thermal conductivity of solute increases (D) None of these

Last Answer : (A) Diffusivity of solute increases

1. __________ of air does not increase with increase in temperature. (A) Density (B) Thermal diffusivity (C) Viscosity (D) Thermal conductivi

Description : 1. __________ of air does not increase with increase in temperature. (A) Density (B) Thermal diffusivity (C) Viscosity (D) Thermal conductivi

Last Answer : Option A

In a homogeneous solution, the activity co-efficient of a component depends upon the (A) Pressure (B) Composition (C) Temperature (D) All (A), (B) and (C)

Description : In a homogeneous solution, the activity co-efficient of a component depends upon the (A) Pressure (B) Composition (C) Temperature (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Analogy between mass and heat transfer is not applicable in case of (A) Same velocity profile or equal eddy diffusivities (B) Thermal or pressure mass diffusion (C) Viscous heating or chemical reaction (D) Both (B) and (C)

Description : Analogy between mass and heat transfer is not applicable in case of (A) Same velocity profile or equal eddy diffusivities (B) Thermal or pressure mass diffusion (C) Viscous heating or chemical reaction (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Gaseous diffusion co-efficient increases with increase in the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Gaseous diffusion co-efficient increases with increase in the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Temperature

The wetted wall tower is used to determine (A) Individual mass transfer co-efficient (M.T.C.) in gaseous system (B) M.T.C. of individual components in a liquid-liquid system (C) M.T.C. of liquid in liquid-gas system (D) The overall M.T.C. of the system

Description : The wetted wall tower is used to determine (A) Individual mass transfer co-efficient (M.T.C.) in gaseous system (B) M.T.C. of individual components in a liquid-liquid system (C) M.T.C. of liquid in liquid-gas system (D) The overall M.T.C. of the system

Last Answer : (A) Individual mass transfer co-efficient (M.T.C.) in gaseous system

The relation among various mass transfer co-efficients (M.T.C) for ideal gases is given by (where, Kc & Km are M.T.C. for equimolar counter diffusion with concentration & mole fraction respectively as the driving force. and, Kp= M.T.C. for diffusion of a gas through a stagnant inert gas with pressure as driving force.) (A) Kc = Kp = Km (B) Kc = Kp /RT = Km . RT/P (C) Kc = Kp . RT = Km . RT/p (D) None of these

Description : The relation among various mass transfer co-efficients (M.T.C) for ideal gases is given by (where, Kc & Km are M.T.C. for equimolar counter diffusion with concentration & mole fraction respectively as the driving ... (C) Kc = Kp . RT = Km . RT/p (D) None of these

Last Answer : (C) Kc = Kp . RT = Km . RT/p

Kinematic viscosity is dependent upon (A) Pressure (B) Distance (C) Density (D) Flow

Description : Kinematic viscosity is dependent upon (A) Pressure (B) Distance (C) Density (D) Flow

Last Answer : Answer: Option C

. (NSh /NRe .NSc ) is termed in mass transfer operation as the (A) Stanton number (B) Peclet number (C) Thermal diffusivity (D) Momentum diffusivity

Description : . (NSh /NRe .NSc ) is termed in mass transfer operation as the (A) Stanton number (B) Peclet number (C) Thermal diffusivity (D) Momentum diffusivity

Last Answer : (A) Stanton number

Lewis number, which is important in problems involving simultaneous heat and mass transfer, is the ratio of (A) Mass diffusivity to momentum diffusivity (B) Thermal diffusivity to mass diffusivity (C) Momentum diffusivity to thermal diffusivity (D) None of these

Description : Lewis number, which is important in problems involving simultaneous heat and mass transfer, is the ratio of (A) Mass diffusivity to momentum diffusivity (B) Thermal diffusivity to mass diffusivity (C) Momentum diffusivity to thermal diffusivity (D) None of these

Last Answer : (B) Thermal diffusivity to mass diffusivity

In case of non-ideal gases and liquids, the molal diffusivity (A) Varies inversely as the pressure (B) Varies directly as the pressure (C) Is independent of pressure (D) Is equal to the volumetric diffusivity

Description : In case of non-ideal gases and liquids, the molal diffusivity (A) Varies inversely as the pressure (B) Varies directly as the pressure (C) Is independent of pressure (D) Is equal to the volumetric diffusivity

Last Answer : (C) Is independent of pressure

The discharge through a Venturimeter depends upon (A) Pressure drop only (B) Its orientation (C) Co-efficient of contraction only (D) None of these

Description : The discharge through a Venturimeter depends upon (A) Pressure drop only (B) Its orientation (C) Co-efficient of contraction only (D) None of these

Last Answer : (A) Pressure drop only

The emf of a primary cell depends upon the: a) Physical dimension of the cell b) Nature of the electrolyte c) Nature of the electrode d) Both (b) and (c)

Description : The emf of a primary cell depends upon the: a) Physical dimension of the cell b) Nature of the electrolyte c) Nature of the electrode d) Both (b) and (c)

Last Answer : Ans: D

Resistance of a conductor depends upon a. nature of conductor b. dimension of conductor c. physical state of the conductor d. all of above

Description : Resistance of a conductor depends upon a. nature of conductor b. dimension of conductor c. physical state of the conductor d. all of above

Last Answer : d. all of above

Joule-Thomson co-efficient depends on the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Joule-Thomson co-efficient depends on the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The left face of a one dimensional slab of thickness 0.2 m is maintained at 80°C and the right face is exposed to air at 30°C. The thermal conductivity of the slab is 1.2 W/m.K and the heat transfer co-efficient from the right face is 10 W/m2 .K. At steady state, the temperature of the right face in °C is (A) 77.2 (B) 71.2 (C) 63.8 (D) 48.7

Description : The left face of a one dimensional slab of thickness 0.2 m is maintained at 80°C and the right face is exposed to air at 30°C. The thermal conductivity of the slab is 1.2 W/m.K and the heat transfer co-efficient from the ... temperature of the right face in °C is (A) 77.2 (B) 71.2 (C) 63.8 (D) 48.7

Last Answer : (D) 48.7

. The inner wall of a furnace is at a temperature of 700°C. The composite wall is made of two substances, 10 and 20 cm thick with thermal conductivities of 0.05 and 0.1 W.m-1.°C-1 respectively. The ambient air is at 30°C and the heat transfer co-efficient between the outer surface of wall and air is 20 W.m-2 .°C-1 . The rate of heat loss from the outer surface in W.m-2 is (A) 165.4 (B) 167.5 (C) 172.5 (D) 175

Description : . The inner wall of a furnace is at a temperature of 700°C. The composite wall is made of two substances, 10 and 20 cm thick with thermal conductivities of 0.05 and 0.1 W.m-1.°C-1 respectively. The ambient air is at 30°C ... from the outer surface in W.m-2 is (A) 165.4 (B) 167.5 (C) 172.5 (D) 175

Last Answer : (A) 165.4

Walls of a cubical oven are of thickness l, and they are made of material of thermal conductivity k. The temperature inside the oven is 100°C and the inside heat transfer co-efficient is ‘3k/l’. If the wall temperature on the outside is held at 25°C, what is the inside wall temperature in degree centigrade?(A) 35.5 (B) 43.75 (C) 81.25 (D) 48.25

Description : Walls of a cubical oven are of thickness l, and they are made of material of thermal conductivity k. The temperature inside the oven is 100°C and the inside heat transfer co-efficient is 3k/l'. If the wall temperature ... wall temperature in degree centigrade? (A) 35.5 (B) 43.75 (C) 81.25 (D) 48.25

Last Answer : (C) 81.25

Plate towers are preferred to packed towers, when large temperature changes are involved, because of the reason that the (A) Packing may be crushed due to thermal expansion/contraction of the components of the equipments (B) Pressure drop in the equipment will be very high (C) Viscosity variation of the fluids may cause channelling/flooding (D) None of these

Description : Plate towers are preferred to packed towers, when large temperature changes are involved, because of the reason that the (A) Packing may be crushed due to thermal expansion/contraction of the ... C) Viscosity variation of the fluids may cause channelling/flooding (D) None of these

Last Answer : (A) Packing may be crushed due to thermal expansion/contraction of the components of the equipments

. Boiling point elevation for a strong and concentrated solution is found by Duhring's rule, which states that at the same pressure, the boiling point of a solution is a linear function of the __________ of pure water. (A) Boiling point (B) Dynamic viscosity (C) Kinematic viscosity (D) Density

Description : . Boiling point elevation for a strong and concentrated solution is found by Duhring's rule, which states that at the same pressure, the boiling point of a solution is a linear function of the __________ of pure water. (A) Boiling point (B) Dynamic viscosity (C) Kinematic viscosity (D) Density

Last Answer : (A) Boiling point

The kinematic viscosity (in stoke) and the absolute/dynamic viscosity (in poise) are the same for __________ at room temperature. (A) Air (B) Water (C) Mercury (D) Alcohol

Description : The kinematic viscosity (in stoke) and the absolute/dynamic viscosity (in poise) are the same for __________ at room temperature. (A) Air (B) Water (C) Mercury (D) Alcohol

Last Answer : (B) Water

Extremely large or small volumes of fluids are generally best routed through the shell side of a shell and tube heat exchanger, because of the (A) Less corrosion problems (B) Flexibility possible in the baffle arrangement (C) Low pressure drop (D) High heat transfer co-efficient

Description : Extremely large or small volumes of fluids are generally best routed through the shell side of a shell and tube heat exchanger, because of the (A) Less corrosion problems (B) Flexibility possible in the baffle arrangement (C) Low pressure drop (D) High heat transfer co-efficient

Last Answer : (B) Flexibility possible in the baffle arrangement

Double pipe heat exchangers are preferably useful, when (A) High viscosity liquid is to be cooled (B) Requirement of heat transfer area is low (C) Overall heat transfer co-efficient is very high (D) A corrosive liquid is to be heated

Description : Double pipe heat exchangers are preferably useful, when (A) High viscosity liquid is to be cooled (B) Requirement of heat transfer area is low (C) Overall heat transfer co-efficient is very high (D) A corrosive liquid is to be heated

Last Answer : (B) Requirement of heat transfer area is low