Explain drying step in the manufacture of paper.

1 Answer

Answer :

After obtaining paper web, water is removed from it be using air or heat. Earlier method of

drying was to hang paper sheets as clothes. Now steam heated can drier are used for

drying paper.

Related questions

Description : Which of the following is an additional step in the manufacture of paper from bagasse as compared to that from bamboo? (A) Depithing (B) Digestion (C) Bleaching (D) None of these

Last Answer : (A) Depithing

Description : Which oil is preferred for paint manufacture? (A) Drying oil (B) Non-drying oil (C) Semi-drying oil (D) Saturated oi

Last Answer : (A) Drying oil

Description : Which profession would you expect "Don't use the toilet paper in public washroom, for hand drying" from?

Last Answer : paper towel salesmen?

Description : Briefly explain the manufacture of paper.

Last Answer : First wood is chipped into pieces and made into fibres. The moist fibres are pressed together. Additives like chalk or china clay may be added to improve the characteristics of paper. Then the ... steam heated can drier. Now the paper is cut into different sizes to alter its physical properties.

Description : In step growth polymerisation, generally only one type of reaction & some basic mechanism is involved. Step growth polymerisation reaction is not involved in the manufacture of (A) Cross linked polystyrene (B) Phenol formaldehyde resins (C) Polyesters (D) Polyamides

Last Answer : (A) Cross linked polystyrene

Description : The rate controlling step in the manufacture of silicone rubber is the (A) Polymer termination step (B) Condensation of siloxane to silicone (C) Initial hydrolysis of silicone monomer (D) None of these

Last Answer : (C) Initial hydrolysis of silicone monomer

Description : Mention the steps involved in the manufacture of paper.

Last Answer : a) Pulping b) Mixing additives c) Drying d) Finishing

Description : The compound used in manufacture of emery paper or sand paper is

Last Answer : silica.

Description : Wood is the main raw material for the manufacture of ------? A. Paint B. Gun powder C. Paper (Answer) D. Ink

Last Answer : C. Paper (Answer)

Description : Which woody raw material is used for the manufacture of paper pulp? A. Cotton B. Poplar (Answer) C. Bagasse D. Rice straw

Last Answer : B. Poplar (Answer)

Description : How do you find a toilet paper manufacturer to manufacture your own private label toilet paper?

Last Answer : People go through a lot of toilet paper around the world. Not to mention, after our new life, that is in the current pandemic situation where everyone is increasing hygiene standards, let's say ... strictly check as it can directly affect your brand's image. Maybe you are looking for toilet pap

Description : In the Kraft (sulphate) process for the paper manufacture, the digestor is made of (A) Cast iron (B) Stainless steel (C) Karbate carbon (D) Wrought iron

Last Answer : (B) Stainless steel

Description : In the Kraft process of sulphate paper pulp manufacture, the black liquor and the white liquor storage tank is made of (A) Concrete (B) Wood (C) Steel (D) Porcelain

Last Answer : (C) Steel

Description : Black liquor generated during paper manufacture is concentrated in a (A) Single effect evaporator (B) Single effect evaporator followed by a crystalliser (C) Multiple effect evaporator (D) Multiple effect evaporators followed by a crystalliser

Last Answer : (C) Multiple effect evaporator

Description : Multiple effect evaporators are commonly used in the manufacture of P. Paper Q. Superphosphate R. Sugar S. Fats (A) P and Q (B) P and R (C) P and S (D) R and S

Last Answer : (C) P and S

Description : Hollander beater used during paper pulp manufacture does not facilitate the __________ of fibre. (A) Cutting (B) Fibrillation (C) Hydration (D) Strengthening

Last Answer : (D) Strengthening

Description : The major constituent of black liquor generated during paper manufacture is sodium (A) Sulphate (B) Carbonate (C) Hydroxide (D) Bi-carbonate

Last Answer : (B) Carbonate

Description : Out of the following processes of paper pulp manufacture, the maximum corrosion problem in digestion & handling equipments is encountered in the __________ process. (A) Mechanical (B) Sulphate/Kraft (C) Sulphite (D) Neutral sulphite semi-chemical

Last Answer : (D) Neutral sulphite semi-chemical

Description : The ideal pulp for the manufacture of paper should have high __________ content. (A) Cellulose (B) Lignin (C) Both (A) & (B) (D) None of these

Last Answer : (A) Cellulose

Description : __________ paper is used in the manufacture of newsprint paper. (A) Ground-wood (B) Board (C) Tissue (D) Wrapping

Last Answer : (A) Ground-wood

Description : . Most easily and cheaply available fibrous raw material for paper manufacture available in India is bamboo. The yield of pulp produced from fibrous raw material by mechanical process is about __________ percent. (A) 75 (B) < 10 (C) > 30 (D) 50

Last Answer : (B) < 10

Description : Pick out the wrong statement. (A) Fibrillation of fibre during paper manufacture is done to develop the strength in paper (B) Alkali consumption in digestion/cooking of bamboo is measured in terms ... both lignin & cellulose (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Last Answer : (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Description : Rosin soap is added during paper manufacture to (A) Impart adhesive properties (B) Improve opacity (C) Impart resistance to penetration by liquids (D) None of these

Last Answer : (C) Impart resistance to penetration by liquids

Description : Fourdrinier machine is used in the manufacture of (A) Sugar (B) Paper (C) Alcohol from molasses (D) Phenol formaldehyde

Last Answer : (B) Paper

Description : Which of the following paper does not require a filler during manufacture? (A) Bond paper (B) Writing paper (C) Blotting paper (D) Coloured paper

Last Answer : (C) Blotting paper

Description : In Kraft process of paper manufacture, white cooking liquor consists of caustic soda (A) Sodium sulphide & sodium carbonate (B) Sodium sulphite & sodium carbonate (C) Sodium sulphite & sodium sulphide (D) None of these

Last Answer : (A) Sodium sulphide & sodium carbonate

Description : Cellulose content of bamboo and ideal fibrous raw material for the manufacture of paper is __________ percent. (A) 10 (B) 50 (C) 80 (D) 95

Last Answer : (B) 50

Description : Molasses a by-product in the manufacture of sugar, is converted into (1) alcohol (2) paper (3) fuel (4) pulp

Last Answer : alcohol

Description : Draw the transformer drying out curve and explain each stage. 

Last Answer : When we start the filtering process initially the temperature will be low, as the insulation value is high. But on temperature increases the IR value starts to decrease because the moisture ... value goes up and as the heaters are off the temperature decreases. This is the third stage.

Description : Explain the following unit operations: (i) Mixing (ii) Drying (iii) Evaporation (iv) Absorption.

Last Answer : i)Mixing: Mixing is carried out for producing simple mixtures, accomplishing dispersions and promoting chemical reactions. It is a process in which two separate materials such as two different ... ammonia mixture by water 2) Removal of hydrogen sulfide from naturally occurring hydrocarbon gases.

Description : Explain the principle of the following – (i) Distillation (ii) Drying (iii) Crystallization

Last Answer : Distillation:-Distillation is an operation in which the components of a liquid mixture are separated using thermal energy. It depends upon the difference in boiling points of the individual components. The ... temperature. The solute then comes out of the solution in the form of pure crystals.  

Description : Explain The theory of freeze drying and state its application.

Last Answer : Theory:-  i) In this process, the material is frozen in a suitable container connected to a high vacuum system, so that the vapour pressure of water vapours is ... antibiotics, blood products, vaccines, enzymes preparation, microbiological cultures & other thermo labile pharmaceutical substances.

Description : Explain principle of freeze drying. Give its advantages.

Last Answer : Principle:  i. The material is frozen in a suitable container connected to a high vacuum system, so that the vapour pressure of water is reduced to less than that of material being dried. ii. ... it is properly sealed in an inert atmosphere. vii. The sterility of the product can be maintained.