The rate controlling step in the manufacture of silicone rubber is the (A) Polymer termination step (B) Condensation of siloxane to silicone (C) Initial hydrolysis of silicone monomer (D) None of these

The rate controlling step in the manufacture of silicone rubber is the
(A) Polymer termination step
(B) Condensation of siloxane to silicone
(C) Initial hydrolysis of silicone monomer
(D) None of these
by

1 Answer

Answer :

(C) Initial hydrolysis of silicone monomer
by

Related questions

Styrene butadiene rubber (SBR) is (A) A natural rubber (B) A synthetic polymer (C) A synthetic monomer (D) Another name of silicone rubber

Description : Styrene butadiene rubber (SBR) is (A) A natural rubber (B) A synthetic polymer (C) A synthetic monomer (D) Another name of silicone rubber

Last Answer : (B) A synthetic polymer

A chain growth polymerisation reaction consists of three different types of reaction namely initiation reaction, propagation reaction & termination reaction. Chain growth polymerisation reaction is not involved in the manufacture of (A) Siloxane elastomers (B) Polyamides (C) Vinyl polymers (D) Urea-formaldehyde resins

Description : A chain growth polymerisation reaction consists of three different types of reaction namely initiation reaction, propagation reaction & termination reaction. Chain growth polymerisation reaction is not involved ... Siloxane elastomers (B) Polyamides (C) Vinyl polymers (D) Urea-formaldehyde resins

Last Answer : (D) Urea-formaldehyde resins

Silicone is a/an (A) Monomer (B) Inorganic polymer (C) Thermoplastic material (D) A natural polymer

Description : Silicone is a/an (A) Monomer (B) Inorganic polymer (C) Thermoplastic material (D) A natural polymer

Last Answer : (B) Inorganic polymer

Silicone is a/an (A) Thermoplastic (B) Inorganic polymer (C) Monomer (D) None of these

Description : Silicone is a/an (A) Thermoplastic (B) Inorganic polymer (C) Monomer (D) None of these

Last Answer : (B) Inorganic polymer

Pick out the wrong statement. (A) Polymers made of only one monomer is called homopolymer (B) Polymers made of more than one monomer is called copolymer or mixed polymer (C) Vulcanised rubber is more elastic than natural rubber

Description : Pick out the wrong statement. (A) Polymers made of only one monomer is called homopolymer (B) Polymers made of more than one monomer is called copolymer or mixed polymer (C) Vulcanised rubber is more elastic than natural rubber

Last Answer : (A) Polymers made of only one monomer is called homopolyme

Tubeless tyres are made of __________ rubber, which is a co-polymer of isoprene & isobutylene. (A) Nitrile (B) Silicone (C) Neoprene (D) Buty

Description : Tubeless tyres are made of __________ rubber, which is a co-polymer of isoprene & isobutylene. (A) Nitrile (B) Silicone (C) Neoprene (D) Buty

Last Answer : (D) Buty

Styrene butadiene rubber (SBR) is (A) A natural rubber (B) Another name of silicone rubber (C) A synthetic polymer (D) A synthetic monome

Description : Styrene butadiene rubber (SBR) is (A) A natural rubber (B) Another name of silicone rubber (C) A synthetic polymer (D) A synthetic monome

Last Answer : (C) A synthetic polymer

An impression with elastomer in custom tray has been taken for crown preparation; it will be two days before the impression gets to the laboratory for construction of the crown. Which impression material is preferred? A. Polyether B. Thiokol or meraptan rubber C. Condensation silicone D. Vinyl polysiloxane

Description : An impression with elastomer in custom tray has been taken for crown preparation; it will be two days before the impression gets to the laboratory for construction of the crown. Which impression ... A. Polyether B. Thiokol or meraptan rubber C. Condensation silicone D. Vinyl polysiloxane

Last Answer : D. Vinyl polysiloxane

For a heterogeneous catalytic reaction, A + B → C, with equimole feed of A and B, the initial rate - rA0 is invariant with total pressure. The rate controlling step is (A) Surface Kc /(1 + TS ) reaction between absorbed A and B in the gas phase (B) Surface reaction between absorbed A and absorbed B (C) Surface reaction between A in the gas phase and absorbed B(D) Desorption of C

Description : For a heterogeneous catalytic reaction, A + B → C, with equimole feed of A and B, the initial rate - rA0 is invariant with total pressure. The rate controlling step is (A) Surface Kc /(1 + TS ) ... A and absorbed B (C) Surface reaction between A in the gas phase and absorbed B (D) Desorption of C

Last Answer : (D) Desorption of C

Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer

Description : Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer

Last Answer : (B) Employs condensation polymerisation

In condensation polymerisation as compared to addition polymerisation (A) The monomers are unsaturated compounds (B) No co-product is lost (C) The monomers contain two functional groups (D) Generally only one monomer is involved

Description : In condensation polymerisation as compared to addition polymerisation (A) The monomers are unsaturated compounds (B) No co-product is lost (C) The monomers contain two functional groups (D) Generally only one monomer is involved

Last Answer : (C) The monomers contain two functional groups

Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer (D) Is an abrasive material

Description : Phenol formaldehyde (A) Employs addition polymerisation (B) Employs condensation polymerisation (C) Is a monomer (D) Is an abrasive material

Last Answer : (B) Employs condensation polymerisation

Teflon is (A) Phenol formaldehyde (B) An inorganic polymer (C) Polytetrafluroethylene (PTFE) (D) A monomer

Description : Teflon is (A) Phenol formaldehyde (B) An inorganic polymer (C) Polytetrafluroethylene (PTFE) (D) A monomer

Last Answer : (C) Polytetrafluroethylene (PTFE)

Teflon is (A) Phenol formaldehyde (B) An inorganic polymer (C) Poly tetra-fluoro-ethylene (P.T.F.E.) (D) A monomer

Description : Teflon is (A) Phenol formaldehyde (B) An inorganic polymer (C) Poly tetra-fluoro-ethylene (P.T.F.E.) (D) A monomer

Last Answer : (C) Poly tetra-fluoro-ethylene (P.T.F.E.)

The initial step of the citric acid cycle is (A) Conversion of pyruvate to acetyl-CoA (B) Condensation of acetyl-CoA with oxaloacetate (C) Conversion of citrate to isocitrate (D) Formation of α -ketoglutarate catalysed by isocitrate dehydrogenase

Description : The initial step of the citric acid cycle is (A) Conversion of pyruvate to acetyl-CoA (B) Condensation of acetyl-CoA with oxaloacetate (C) Conversion of citrate to isocitrate (D) Formation of α -ketoglutarate catalysed by isocitrate dehydrogenase

Last Answer : Answer : B

Teflon is a polymer, monomer of which is:

Description : Teflon is a polymer, monomer of which is:

Last Answer : Teflon is a polymer, monomer of which is: A. difluroethane B. monofluoroethane C. tetrafluoroethene D. tetrafluoroethane

Write the monomer of Glyptal polymer.

Description : Write the monomer of Glyptal polymer.

Last Answer : Ans: (a) Ethylene glycol (b) Phthalic acid 

Neoprene is a polymer of the following monomer (a) Chloroprene (b) Isoprene(c) Isobutane(d) Isopentene

Description : Neoprene is a polymer of the following monomer (a) Chloroprene (b) Isoprene (c) Isobutane (d) Isopentene

Last Answer : Chloroprene

Pick up the correct statement from the following: (A) The substance which consists of one primary chemical, is known as monomer (B) The polymer consists of thousands of monomers joined together (C) The polymer molecule is called macro-molecule (D) All the above

Description : Pick up the correct statement from the following: (A) The substance which consists of one primary chemical, is known as monomer (B) The polymer consists of thousands of monomers joined together (C) The polymer molecule is called macro-molecule (D) All the above

Last Answer : Answer: Option D

Which impression material should NOT be kept in water within on hour: (in another paper it was: 30 mins before pouring) A. Polyether B. Condensation silicone C. Polyvinyl silicone

Description : Which impression material should NOT be kept in water within on hour: (in another paper it was: 30  mins before pouring)  A. Polyether  B. Condensation silicone  C. Polyvinyl silicone 

Last Answer : A. Polyether 

Neoprene is a (A) Monomer (B) Synthetic rubber (C) Polyester (D) None of these

Description : Neoprene is a (A) Monomer (B) Synthetic rubber (C) Polyester (D) None of these

Last Answer : (B) Synthetic rubber

The monomer of natural rubber is (A) DMT (B) Isoprene (C) 2 methyl-1 propane (D) Both (B) and (C

Description : The monomer of natural rubber is (A) DMT (B) Isoprene (C) 2 methyl-1 propane (D) Both (B) and (C

Last Answer : (D) Both (B) and (C

The monomer for the production of neoprene rubber is (A) Acetylene (B) Chloroprene (C) Isoprene (D) None of these

Description : The monomer for the production of neoprene rubber is (A) Acetylene (B) Chloroprene (C) Isoprene (D) None of these

Last Answer : (B) Chloroprene

Neoprene which is used for making shoe heels & belts is superior to natural rubber in its stability to aerial oxidation and resistance to oils & other solvents. The monomer used for making neoprene is (A) Chloroethane (B) Chloroprene (C) Isoprene (D) None of these

Description : Neoprene which is used for making shoe heels & belts is superior to natural rubber in its stability to aerial oxidation and resistance to oils & other solvents. The monomer used for making neoprene is (A) Chloroethane (B) Chloroprene (C) Isoprene (D) None of these

Last Answer : (B) Chloroprene

Neoprene is a (A) Monomer (B) Synthetic rubber(C) Polyester(D) None of these

Description : Neoprene is a (A) Monomer (B) Synthetic rubber (C) Polyester (D) None of these

Last Answer : (B) Synthetic rubber

Silicone is a polymer of – (1) Tetraalkyl silane (2) Silicon tetrachloride (3) Dialkyl dichloro silane (4) Silane

Description : Silicone is a polymer of – (1) Tetraalkyl silane (2) Silicon tetrachloride (3) Dialkyl dichloro silane (4) Silane

Last Answer : (3) Dialkyl dichloro silane Explanation: In order to manufacture silicones, alkyl-substituted chlorosilanes are used as starting material. Since dimethylsilane contains -OH group at the end of ... increases. However, the hydrolysis of alkyl trichlorosilane gives very complex cross linked polymer.

Silicone is a polymer of (1) Tetraalkyl silane (2) Silicon tetrachloride (3) Dialkyl dichloro silane (4) Silane

Description : Silicone is a polymer of (1) Tetraalkyl silane (2) Silicon tetrachloride (3) Dialkyl dichloro silane (4) Silane

Last Answer : Dialkyl dichloro silane

The anticholinesterase action of edrophonium is short lasting because termination of its action depends on: A. Dissociation and diffusion of the drug from the enzyme B. Hydrolysis of the drug by the enzyme C. Synthesis of fresh enzyme molecules D. A combination of the above three processes

Description : The anticholinesterase action of edrophonium is short lasting because termination of its action depends on: A. Dissociation and diffusion of the drug from the enzyme B. Hydrolysis of the drug by the enzyme C. Synthesis of fresh enzyme molecules D. A combination of the above three processes

Last Answer : A. Dissociation and diffusion of the drug from the enzyme

The anticholinesterase action of edrophonium is short lasting because termination of its action depends on: A. Dissociation and diffusion of the drug from the enzyme B. Hydrolysis of the drug by the enzyme C. Synthesis of fresh enzyme molecules D. A combination of the above three processes

Description : The anticholinesterase action of edrophonium is short lasting because termination of its action depends on: A. Dissociation and diffusion of the drug from the enzyme B. Hydrolysis of the drug by the enzyme C. Synthesis of fresh enzyme molecules D. A combination of the above three processes

Last Answer : A. Dissociation and diffusion of the drug from the enzyme

Which of the following rubbers has the widest service temperature range (-75 to 275°C)? (A) Butyl rubber (B) Silicon rubber (C) Nitrile rubber (D) Silicone rubber

Description : Which of the following rubbers has the widest service temperature range (-75 to 275°C)? (A) Butyl rubber (B) Silicon rubber (C) Nitrile rubber (D) Silicone rubber

Last Answer : (D) Silicone rubber

Polyhexamethylene adipamide is also known as (A) Bakelite (B) Nylon-66 (C) Epoxy resin (D) Silicone rubber

Description : Polyhexamethylene adipamide is also known as (A) Bakelite (B) Nylon-66 (C) Epoxy resin (D) Silicone rubber

Last Answer : (B) Nylon-66

Flexible foam (for mattresses) are usually made of (A) PVC (B) Silicone rubber (C) Polyurethanes (D) Polyamides

Description : Flexible foam (for mattresses) are usually made of (A) PVC (B) Silicone rubber (C) Polyurethanes (D) Polyamides

Last Answer : (C) Polyurethanes

Polymerisation product of C2F4 (carbon tetrafluoride) is called P.T.F.E. (poly chloro tetra fluoro ethylene). It is also called (A) Polyurethane (B) Silicone rubber (C) Teflon (D) Epoxy resin

Description : Polymerisation product of C2F4 (carbon tetrafluoride) is called P.T.F.E. (poly chloro tetra fluoro ethylene). It is also called (A) Polyurethane (B) Silicone rubber (C) Teflon (D) Epoxy resin

Last Answer : (C) Teflon

Silicone rubber is not resistant to the corrosive action of (A) Sulphuric acid (10%) (B) Sulphuric acid (95%) (C) Ether (D) Both (B) and (C)

Description : Silicone rubber is not resistant to the corrosive action of (A) Sulphuric acid (10%) (B) Sulphuric acid (95%) (C) Ether (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Last Answer : (D) Brass, cast iron, mild steel and tin

Specify the material of construction suitable for handling concentrated HNO3 at 100°C. (A) High silicon iron, Kel-F and Teflon (B) Tin and wood (C) Silicone rubber (D) Stainless steel

Description : Specify the material of construction suitable for handling concentrated HNO3 at 100°C. (A) High silicon iron, Kel-F and Teflon (B) Tin and wood (C) Silicone rubber (D) Stainless steel

Last Answer : (A) High silicon iron, Kel-F and Teflon

H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin

Pick out the wrong statemen(A) Autocatalytic reactions are exemplified by microbial fermentation reactions (B) The slowest step has the greatest influence on the overall reaction rate in case of an irreversible series reaction (C) The fractional conversion at any time is same for both the constant as well as the variable volume system in case of an irreversible unimolecular type first order reaction (D) Hydrolysis of ester in presence of alkali or acid is a zero order reaction

Description : Pick out the wrong statemen (A) Autocatalytic reactions are exemplified by microbial fermentation reactions (B) The slowest step has the greatest influence on the overall reaction rate in case of an ... reaction (D) Hydrolysis of ester in presence of alkali or acid is a zero order reaction

Last Answer : (D) Hydrolysis of ester in presence of alkali or acid is a zero order reaction

Which of the following is not a condensation polymer? (A) Bakelite (B) Melamine polymer (C) Poly-methyl-methacrylate (PMMA) (D) None of these

Description : Which of the following is not a condensation polymer? (A) Bakelite (B) Melamine polymer (C) Poly-methyl-methacrylate (PMMA) (D) None of these

Last Answer : (C) Poly-methyl-methacrylate (PMMA)

__________ is not a condensation polymer. (A) Teflon (B) Nylon-66 (C) Dacron (D) Polystyrene

Description : __________ is not a condensation polymer. (A) Teflon (B) Nylon-66 (C) Dacron (D) Polystyrene

Last Answer : (A) Teflon

Dacron is a/an (A) Addition polymer (B) Condensation polymer (C) Polyester (D) Both (B) and (C)

Description : Dacron is a/an (A) Addition polymer (B) Condensation polymer (C) Polyester (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Orion is (A) A copolymer (B) A condensation polymer (C) Obtained by polymerising vinyl cyanide (D) All (A), (B) and (C)

Description : Orion is (A) A copolymer (B) A condensation polymer (C) Obtained by polymerising vinyl cyanide (D) All (A), (B) and (C)

Last Answer : (C) Obtained by polymerising vinyl cyanide

What is the monomer of natural rubber?

Description : What is the monomer of natural rubber?

Last Answer : A. Isoprene (2-Methylbut-1,3-diene). 

can I give my dog both siloxane and tramadol?

Description : content:

Last Answer : answer:

Pick out the correct statement. (A) A lower temperature favours the reaction of lower activation energy (B) The dispersion number for a reactor/vessel is uL/D (C) The rate controlling step in a reaction involving many steps is the fastest step (D) Pore volume and porosity of a catalyst is measured by Brunauer￾Emmett-Teller (BET) technique

Description : Pick out the correct statement. (A) A lower temperature favours the reaction of lower activation energy (B) The dispersion number for a reactor/vessel is uL/D (C) The rate controlling step in ... step (D) Pore volume and porosity of a catalyst is measured by Brunauer￾Emmett-Teller (BET) technique

Last Answer : (A) A lower temperature favours the reaction of lower activation energy

Which one is the rate controlling step in a solid-gas non-catalytic reaction occurring at very high temperature? (A) Pore diffusion (B) Film diffusion (C) Ash layer diffusion (D) Chemical reaction

Description : Which one is the rate controlling step in a solid-gas non-catalytic reaction occurring at very high temperature? (A) Pore diffusion (B) Film diffusion (C) Ash layer diffusion (D) Chemical reaction

Last Answer : (B) Film diffusion

If a solid-gas non-catalytic reaction occurs at very high temperature, the rate controlling step is the __________ diffusion. (A) Film (B) Ash layer (C) Pore (D) None of these

Description : If a solid-gas non-catalytic reaction occurs at very high temperature, the rate controlling step is the __________ diffusion. (A) Film (B) Ash layer (C) Pore (D) None of these

Last Answer : (A) Film

What is silicone rubber? -Biology

Description : What is silicone rubber? -Biology

Last Answer : answer:

How to Paint Silicone Rubber?

Description : How to Paint Silicone Rubber?

Last Answer : Whether you are curious about how to get paint to stay on your silicone caulk or you simply want to paint a few interesting designs on a simple prosthetic made of silicone rubber, the process for painting ... to four, mineral spirits and craft brushes.Use a rag and some dish soap to scrub your sili

Why am I allergic to silicone rubber?

Description : Why am I allergic to silicone rubber?

Last Answer : Some people are allergic because of the rubber and the material can be irritating. Allergies are an immune response and a protective mechanism to fight off bacteria. Allergies are caused by the immune ... hypersensitive. If you are allergic to silicone rubber, you may have other allergies as well.