. Most easily and cheaply available fibrous raw material for paper manufacture available in India is bamboo. The yield of pulp produced from fibrous raw material by mechanical process is about __________ percent. (A) 75 (B) < 10 (C) > 30 (D) 50

. Most easily and cheaply available fibrous raw material for paper
manufacture available in India is bamboo. The yield of pulp produced from
fibrous raw material by mechanical process is about __________ percent.
(A) 75
(B) < 10
(C) > 30
(D) 50
by

1 Answer

Answer :

(B) < 10
by

Related questions

Cellulose content of bamboo and ideal fibrous raw material for the manufacture of paper is __________ percent. (A) 10 (B) 50 (C) 80 (D) 95

Description : Cellulose content of bamboo and ideal fibrous raw material for the manufacture of paper is __________ percent. (A) 10 (B) 50 (C) 80 (D) 95

Last Answer : (B) 50

Paper pulp produced by Kraft/sulphate process is (A) Bleached easily (B) Dull white in color (C) Strong fibrous (D) Dark colored

Description : Paper pulp produced by Kraft/sulphate process is (A) Bleached easily (B) Dull white in color (C) Strong fibrous (D) Dark colored

Last Answer : (C) Strong fibrous

Pick out the wrong statement. (A) Kraft method of pulp manufacture can process all types of fibrous raw materials (B) Digestion time for bagasse is less than that for wood base materials (C) Both temperature and pressure in the digestor is less in case of the sulphite method as compared to that in the sulphate method (D) None of these

Description : Pick out the wrong statement. (A) Kraft method of pulp manufacture can process all types of fibrous raw materials (B) Digestion time for bagasse is less than that for wood base materials (C) Both ... in case of the sulphite method as compared to that in the sulphate method (D) None of these

Last Answer : (D) None of these

Out of the following processes of paper pulp manufacture, the maximum corrosion problem in digestion & handling equipments is encountered in the __________ process. (A) Mechanical (B) Sulphate/Kraft (C) Sulphite (D) Neutral sulphite semi-chemical

Description : Out of the following processes of paper pulp manufacture, the maximum corrosion problem in digestion & handling equipments is encountered in the __________ process. (A) Mechanical (B) Sulphate/Kraft (C) Sulphite (D) Neutral sulphite semi-chemical

Last Answer : (D) Neutral sulphite semi-chemical

Pick out the wrong statement. (A) Fibrillation of fibre during paper manufacture is done to develop the strength in paper (B) Alkali consumption in digestion/cooking of bamboo is measured in terms of permanganate number (C) Bagasse fibre contains both lignin & cellulose (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Description : Pick out the wrong statement. (A) Fibrillation of fibre during paper manufacture is done to develop the strength in paper (B) Alkali consumption in digestion/cooking of bamboo is measured in terms ... both lignin & cellulose (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Last Answer : (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Which woody raw material is used for the manufacture of paper pulp? A. Cotton B. Poplar (Answer) C. Bagasse D. Rice straw

Description : Which woody raw material is used for the manufacture of paper pulp? A. Cotton B. Poplar (Answer) C. Bagasse D. Rice straw

Last Answer : B. Poplar (Answer)

Production of one ton of dry paper pulp requires about __________ tons of bamboo or wood. (A) 1 (B) 2.5 (C) 5 (D) 10

Description : Production of one ton of dry paper pulp requires about __________ tons of bamboo or wood. (A) 1 (B) 2.5 (C) 5 (D) 10

Last Answer : (B) 2.5

In the manufacture of viscose rayon, the raw material used industrially is (A) Eucalyptus wood (B) Bamboo (C) Bagasse (D) Fine teak wood

Description : In the manufacture of viscose rayon, the raw material used industrially is (A) Eucalyptus wood (B) Bamboo (C) Bagasse (D) Fine teak wood

Last Answer : (D) Fine teak wood

Yield of charcoal in high temperature carbonisation of wood is about __________ percent. (A) 10 (B) 25 (C) 50 (D) 75

Description : Yield of charcoal in high temperature carbonisation of wood is about __________ percent. (A) 10 (B) 25 (C) 50 (D) 75

Last Answer : (B) 25

Quantity of coke produced from metallurgical coal may be around __________ percent. (A) 30 (B) 50 (C) 75 (D) 95

Description : Quantity of coke produced from metallurgical coal may be around __________ percent. (A) 30 (B) 50 (C) 75 (D) 95

Last Answer : (C) 75

Hollander beater used during paper pulp manufacture does not facilitate the __________ of fibre. (A) Cutting (B) Fibrillation (C) Hydration (D) Strengthening

Description : Hollander beater used during paper pulp manufacture does not facilitate the __________ of fibre. (A) Cutting (B) Fibrillation (C) Hydration (D) Strengthening

Last Answer : (D) Strengthening

The ideal pulp for the manufacture of paper should have high __________ content. (A) Cellulose (B) Lignin (C) Both (A) & (B) (D) None of these

Description : The ideal pulp for the manufacture of paper should have high __________ content. (A) Cellulose (B) Lignin (C) Both (A) & (B) (D) None of these

Last Answer : (A) Cellulose

Viscose rayon (A) Cannot be made from sulphite pulp (B) Utilises H2SO4 , NaOH and CS2 during its manufacture (C) Cannot yield textile grade fibre (D) None of these

Description : Viscose rayon (A) Cannot be made from sulphite pulp (B) Utilises H2SO4 , NaOH and CS2 during its manufacture (C) Cannot yield textile grade fibre (D) None of these

Last Answer : (B) Utilises H2SO4 , NaOH and CS2 during its manufacture

In the Kraft process of sulphate paper pulp manufacture, the black liquor and the white liquor storage tank is made of (A) Concrete (B) Wood (C) Steel (D) Porcelain

Description : In the Kraft process of sulphate paper pulp manufacture, the black liquor and the white liquor storage tank is made of (A) Concrete (B) Wood (C) Steel (D) Porcelain

Last Answer : (C) Steel

Cellulose content in bamboo fibre is about __________ percent. (A) 10 (B) 20 (C) 50 (D) 85

Description : Cellulose content in bamboo fibre is about __________ percent. (A) 10 (B) 20 (C) 50 (D) 85

Last Answer : (C) 50

Paper grade bamboo contains about __________ percent cellulose. (A) 5 (B) 20 (C) 40 (D) 60

Description : Paper grade bamboo contains about __________ percent cellulose. (A) 5 (B) 20 (C) 40 (D) 60

Last Answer : (A) 5

Most chemical plants use an initial working capital amounting to 10- 20% of the total capital investment. But this percentage may increase to __________ percent in case of seasonal products manufacturing plant. (A) 30 (B) 50 (C) 75 (D) 95

Description : Most chemical plants use an initial working capital amounting to 10- 20% of the total capital investment. But this percentage may increase to __________ percent in case of seasonal products manufacturing plant. (A) 30 (B) 50 (C) 75 (D) 95

Last Answer : (B) 50

The manufacture of Kraft pulp is done by a/an __________ process.(A) Alkaline (B) Acidic (C) Neutral (D) None of these

Description : The manufacture of Kraft pulp is done by a/an __________ process. (A) Alkaline (B) Acidic (C) Neutral (D) None of these

Last Answer : (A) Alkaline

Polycaprolactam (Nylon - 6) is produced by the condensation polymerisation of caprolactam at 240-280°C in which the conversion of caprolactam is about __________ percent. (A) 50 (B) 75 (C) 90 (D) 99

Description : Polycaprolactam (Nylon - 6) is produced by the condensation polymerisation of caprolactam at 240-280°C in which the conversion of caprolactam is about __________ percent. (A) 50 (B) 75 (C) 90 (D) 99

Last Answer : (C) 90

Which of the following is an additional step in the manufacture of paper from bagasse as compared to that from bamboo? (A) Depithing (B) Digestion (C) Bleaching (D) None of these

Description : Which of the following is an additional step in the manufacture of paper from bagasse as compared to that from bamboo? (A) Depithing (B) Digestion (C) Bleaching (D) None of these

Last Answer : (A) Depithing

Caprolactam (a raw material for nylon-6 manufacture) is produced from (A) Phenol (B) Naphthalene (C) Benzene (D) Pyridine

Description : Caprolactam (a raw material for nylon-6 manufacture) is produced from (A) Phenol (B) Naphthalene (C) Benzene (D) Pyridine

Last Answer : (C) Benzene

Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C) Raw materials for DDT manufacture are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Description : Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C ... are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Last Answer : (C) Raw materials for DDT manufacture are benzene and chlorine

High relative humidity decreases the evaporative process and as the temperature is increased, the relative humidity decreases. The comfort range for human body is the ambient temperature of 22 to 27°C with relative humidity ranging from __________ percent. (A) 5 to 10 (B) 15 to 25 (C) 45 to 50 (D) 75 to 80

Description : High relative humidity decreases the evaporative process and as the temperature is increased, the relative humidity decreases. The comfort range for human body is the ambient temperature of 22 to 27°C with relative humidity ranging from __________ ... to 10 (B) 15 to 25 (C) 45 to 50 (D) 75 to 80

Last Answer : (C) 45 to 50

Wood is the main raw material for the manufacture of ------? A. Paint B. Gun powder C. Paper (Answer) D. Ink

Description : Wood is the main raw material for the manufacture of ------? A. Paint B. Gun powder C. Paper (Answer) D. Ink

Last Answer : C. Paper (Answer)

Molasses a by-product in the manufacture of sugar, is converted into (1) alcohol (2) paper (3) fuel (4) pulp

Description : Molasses a by-product in the manufacture of sugar, is converted into (1) alcohol (2) paper (3) fuel (4) pulp

Last Answer : alcohol

Of the total tar present in raw coke oven gas, the tar recovered in primary cooler is about __________ percent. (A) 5 (B) 25 (C) 55 (D) 75

Description : Of the total tar present in raw coke oven gas, the tar recovered in primary cooler is about __________ percent. (A) 5 (B) 25 (C) 55 (D) 75

Last Answer : (B) 25

Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely used in the manufacture of automobile tyres (C) Manufacture of phenol by chloroben-zene-eaustic process involves. The chlorination of benzene, causticisation and hydrolysis (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Description : Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely ... D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Last Answer : (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Low pressure Zeigler process of polythene manufacture (A) Employs a pressure of 30 kgf/cm2 (B) Achieves an yield of 95-98% based on ethylene (C) Produces very low density polythene (D) Does not use any catalyst for polymerisation

Description : Low pressure Zeigler process of polythene manufacture (A) Employs a pressure of 30 kgf/cm2 (B) Achieves an yield of 95-98% based on ethylene (C) Produces very low density polythene (D) Does not use any catalyst for polymerisation

Last Answer : (B) Achieves an yield of 95-98% based on ethylene

Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Description : Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Last Answer : (D) None of these

For achieving maximum capacity of the ball mill, the ball charge should be equal to about __________ percent of the ball mill volume. (A) 10 (B) 25 (C) 50 (D) 75

Description : For achieving maximum capacity of the ball mill, the ball charge should be equal to about __________ percent of the ball mill volume. (A) 10 (B) 25 (C) 50 (D) 75

Last Answer : (C) 50

Gasoline yield in catalytic reforming of naphtha may be about __________ percent by weight. (A) 85 (B) 65 (C) 50 (D) 98

Description : Gasoline yield in catalytic reforming of naphtha may be about __________ percent by weight. (A) 85 (B) 65 (C) 50 (D) 98

Last Answer : (A) 85

Which of the following have a tendency to recur if not treated?CHECK A. Giant cell granuloma B. Lipoma C. Fibrous epulis D. Haematoma E. Pulp polyps

Description : Which of the following have a tendency to recur if not treated?CHECK A. Giant cell granuloma B. Lipoma C. Fibrous epulis D. Haematoma E. Pulp polyps

Last Answer : A. Giant cell granuloma C. Fibrous epulis

285. Sucrose content in the raw juice extracted from sugar cane is about __________ percent(A) 1 - 2 (B) 15 - 20 (C) 50 - 60 (D) 80 - 85

Description : . Sucrose content in the raw juice extracted from sugar cane is about __________ percent (B) 15 - 20 (A) 1 - 2285 (C) 50 - 60 (D) 80 - 85

Last Answer : (B) 15 - 20

In sulphate pulp manufacture, the pressure and temperature in the digestor is (A) 10 atm., 800 °C (B) 10 atm., 170-180°C (C) 1 atm., 170 - 180°C (D) 1 atm., 800°C

Description : In sulphate pulp manufacture, the pressure and temperature in the digestor is (A) 10 atm., 800 °C (B) 10 atm., 170-180°C (C) 1 atm., 170 - 180°C (D) 1 atm., 800°C

Last Answer : (B) 10 atm., 170-180°C

What are the raw material used for the manufacture of washing soda by solvay process ?

Description : What are the raw material used for the manufacture of washing soda by solvay process ?

Last Answer : Ans. Nacl, CaCO3 and NH3

Paper pulp is an example of __________ fluid.(A) Dilatant (B) Bingham plastic (C) Newtonian (D) Pseudo-plastic

Description : Paper pulp is an example of __________ fluid. (A) Dilatant (B) Bingham plastic (C) Newtonian (D) Pseudo-plastic

Last Answer : (B) Bingham plastic

Grinding efficiency of a ball mill is of the order of __________ percent. (A) 1-5 (B) 40-50 (C) 75-80 (D) 90-95

Description : Grinding efficiency of a ball mill is of the order of __________ percent. (A) 1-5 (B) 40-50 (C) 75-80 (D) 90-95

Last Answer : (A) 1-5

P2O5 content in triple superphosphate is about __________ percent. (A) 42-50 (B) 15-20 (C) 85-90 (D) 70-75

Description : P2O5 content in triple superphosphate is about __________ percent. (A) 42-50 (B) 15-20 (C) 85-90 (D) 70-75

Last Answer : (A) 42-50

Purchased cost of equipments for a chemical process plant ranges from __________ percent of the fixed capital investment. (A) 10 to 20 (B) 20 to 40 (C) 45 to 60 (D) 65 to 75

Description : Purchased cost of equipments for a chemical process plant ranges from __________ percent of the fixed capital investment. (A) 10 to 20 (B) 20 to 40 (C) 45 to 60 (D) 65 to 75

Last Answer : (B) 20 to 40

Solar energy is expensive today because it has to be collected from large areas andwe do not yet have a technology that covers large areas a. Easily. b. Cheaply. c. Conveniently. d. None of the above.

Description : Solar energy is expensive today because it has to be collected from large areas andwe do not yet have a technology that covers large areas a. Easily. b. Cheaply. c. Conveniently. d. None of the above.

Last Answer : b. Cheaply.

Solar energy is expensive today because it has to be collected from large areas andwe do not yet have a technology that covers large areas a. Easily. b. Cheaply. c. Conveniently. d. None of the above.

Description : Solar energy is expensive today because it has to be collected from large areas andwe do not yet have a technology that covers large areas a. Easily. b. Cheaply. c. Conveniently. d. None of the above.

Last Answer : b. Cheaply.

Concentration of NaOH solution produced by mercury electrolytic cell is about __________ percent. (A) 10 (B) 25 (C) 50 (D) 98

Description : Concentration of NaOH solution produced by mercury electrolytic cell is about __________ percent. (A) 10 (B) 25 (C) 50 (D) 98

Last Answer : (C) 50

Concentration of NaOH solution produced by diaphragm electrolytic cell is about __________ percent. (A) 10 (B) 25 (C) 50 (D) 98

Description : Concentration of NaOH solution produced by diaphragm electrolytic cell is about __________ percent. (A) 10 (B) 25 (C) 50 (D) 98

Last Answer : (A) 10

Caprolactam, a raw material for the manufacture of nylon-6, isproduced from(A) Phenol(B) Naphthalene(C) Benzene(D) Pyridine

Description : Caprolactam, a raw material for the manufacture of nylon-6, isproduced from (A) Phenol (B) Naphthalene (C) Benzene (D) Pyridine

Last Answer : (C) Benzene

Starting raw material for the manufacture of Maleic anhydride is (A) n-butene (B) Benzene (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : Starting raw material for the manufacture of Maleic anhydride is (A) n-butene (B) Benzene (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (C) Either (A) or (B)

Which of the following is not a raw material used for the manufacture of ordinary glass? (A) Iron oxide (B) Soda ash (C) Limestone (D) Silica

Description : Which of the following is not a raw material used for the manufacture of ordinary glass? (A) Iron oxide (B) Soda ash (C) Limestone (D) Silica

Last Answer : (A) Iron oxide

Nitro-glycerine absorbed in wood flour, sodium nitrate or ammonium nitrate is commercially used as controlled explosive called dynamite. The raw material used for its manufacture are glycerine, nitric acid and (A) Sulphuric acid (B) Phosphoric acid (C) Hydrochloric acid (D) Hydrofluoric acid

Description : Nitro-glycerine absorbed in wood flour, sodium nitrate or ammonium nitrate is commercially used as controlled explosive called dynamite. The raw material used for its manufacture are glycerine, nitric acid and (A) Sulphuric acid (B) Phosphoric acid (C) Hydrochloric acid (D) Hydrofluoric acid

Last Answer : (A) Sulphuric acid

rting raw material for the manufacture of alum is(A) Alumina(B) Gypsum(C) Bauxite(D) Ammonium bicarbonate

Description : rting raw material for the manufacture of alum is (A) Alumina (B) Gypsum (C) Bauxite (D) Ammonium bicarbonate

Last Answer : (C) Bauxite

Phosphate rock is a raw material for the manufacture of (A) Phosphoric acid (B) Phosphorous (C) Superphosphates (D) All (A), (B) and (C)

Description : Phosphate rock is a raw material for the manufacture of (A) Phosphoric acid (B) Phosphorous (C) Superphosphates (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Salt is the basic raw material for the manufacture of (A) Cement (B) Glass (C) Potteries (D) Caustic soda

Description : Salt is the basic raw material for the manufacture of (A) Cement (B) Glass (C) Potteries (D) Caustic soda

Last Answer : (D) Caustic soda