Which oil is preferred for paint manufacture? (A) Drying oil (B) Non-drying oil (C) Semi-drying oil (D) Saturated oi

Which oil is preferred for paint manufacture?
(A) Drying oil
(B) Non-drying oil
(C) Semi-drying oil
(D) Saturated oi
by

1 Answer

Answer :

(A) Drying oil
by

Related questions

Vegetable oils contain large quantity of glycerides of unsaturated acids. When the vegetable oils contain high amount of saturated fatty acids, it is termed as __________ oil. (A) Drying (B) Semi-drying (C) Non-drying (D) None of these

Description : Vegetable oils contain large quantity of glycerides of unsaturated acids. When the vegetable oils contain high amount of saturated fatty acids, it is termed as __________ oil. (A) Drying (B) Semi-drying (C) Non-drying (D) None of these

Last Answer : (C) Non-drying

Pick out the correct statement. (A) A fat is converted into oil by its hydrogenation (B) There is no difference between a fat and an oil so far as its physical properties are concerned (C) All vegetable oils except coconut oil, contains fatty acids having more than sixteen carbon atoms (D) Vegetable oils are classified as drying, non-drying and semi drying oils depending upon their fatty acids content

Description : Pick out the correct statement. (A) A fat is converted into oil by its hydrogenation (B) There is no difference between a fat and an oil so far as its physical properties are ... Vegetable oils are classified as drying, non-drying and semi drying oils depending upon their fatty acids content

Last Answer : (C) All vegetable oils except coconut oil, contains fatty acids having more than sixteen carbon atoms

__________ is a non volatile film forming constituent of a paint. (A) Thinner (B) Dryer (C) Drying oil (D) None of these

Description : __________ is a non volatile film forming constituent of a paint. (A) Thinner (B) Dryer (C) Drying oil (D) None of these

Last Answer : (C) Drying oil

Which of the following test is used for distinguishing among dry oils, semi-drying oils and non drying oils? (A) Elaiden test (B) Reichert-Meissl value test (C) Hunter value test (D) Iodine value test

Description : Which of the following test is used for distinguishing among dry oils, semi-drying oils and non drying oils? (A) Elaiden test (B) Reichert-Meissl value test (C) Hunter value test (D) Iodine value test

Last Answer : Option A

Octane number is related to (a) Gasoline (b) Kerosene oil (c) Diesel oil (d) Lubricating oi

Description : Octane number is related to (a) Gasoline (b) Kerosene oil (c) Diesel oil (d) Lubricating oi

Last Answer : Gasoline

Which of the following has the highest flash point of all? (A) Diesel (B) Kerosene (C) Petrol (D) Furnace oi

Description : Which of the following has the highest flash point of all? (A) Diesel (B) Kerosene (C) Petrol (D) Furnace oi

Last Answer : (D) Furnace oil

H2S present in naphtha reformed gas is removed by absorbing with (A) Ethanolamine (B) K2CO3 (C) HCl (D) Vacuum gas oi

Description : H2S present in naphtha reformed gas is removed by absorbing with (A) Ethanolamine (B) K2CO3 (C) HCl (D) Vacuum gas oi

Last Answer : (A) Ethanolamine

Which has the lowest Prandtl number? (A) Liquid metal (B) Aqueous solution (C) Water (D) Lube oi

Description : Which has the lowest Prandtl number? (A) Liquid metal (B) Aqueous solution (C) Water (D) Lube oi

Last Answer : (A) Liquid metal

PROBLEM FA sample of soft saturated clay weighs 350 grams and has a volume of 205cc. After oven drying, the soil weighs 225 grams. Calculate the values of saturated unit weight, void ratio, porosity and specific gravity?

Description : PROBLEM FA sample of soft saturated clay weighs 350 grams and has a volume of 205cc. After oven drying, the soil weighs 225 grams. Calculate the values of saturated unit weight, void ratio, porosity and specific gravity?

Last Answer : {

Drying oils contain a fairly large proportion of – (1) fats (2) proteins (3) saturated fatty acids (4) unsaturated fatty acids

Description : Drying oils contain a fairly large proportion of – (1) fats (2) proteins (3) saturated fatty acids (4) unsaturated fatty acids

Last Answer : (4) unsaturated fatty acids Explanation: They contain a high percentage of "polyunsaturates" (polyunsaturated fatty acids). Most drying oils owe their drying properties to the presence of a large percentage of linolenic acid (which derives its name from "linseed"), which is highly unsaturated.

The dry density of soil is a) Always greater than the saturated density b) Weight of soil solids per unit of total volume prior to drying* c) Total weight of soil solids per unit of its total volume d) Total weight of soil mass per unit of its total volume

Description : The dry density of soil is a) Always greater than the saturated density b) Weight of soil solids per unit of total volume prior to drying* c) Total weight of soil solids per unit of its total volume d) Total weight of soil mass per unit of its total volume

Last Answer : b) Weight of soil solids per unit of total volume prior to drying*

Drying oils contain a fairly large proportion of (1) fats (2) proteins (3) saturated fatty acids (4) unsaturated fatty acids

Description : Drying oils contain a fairly large proportion of (1) fats (2) proteins (3) saturated fatty acids (4) unsaturated fatty acids

Last Answer : unsaturated fatty acids

Pick out the wrong statement. (A) In process heat exchangers, saturated steam is preferred over the superheated steam (B) The maximum is the emissive power of a surface at a temperature T1 occurs at a wavelength of λ1 . If the surface temperature is halved, the maximum in the emissive power would occur at a wavelength of 0.5 λ1 (C) When a vertical plate is heated in infinite air environmental under natural convection conditions, the velocity profile in air, normal to the plate, exhibits a maximum

Description : Pick out the wrong statement. (A) In process heat exchangers, saturated steam is preferred over the superheated steam (B) The maximum is the emissive power of a surface at a temperature T1 ... under natural convection conditions, the velocity profile in air, normal to the plate, exhibits a maximum

Last Answer : (B) The maximum is the emissive power of a surface at a temperature T1 occurs at a wavelength of λ1 . If the surface temperature is halved, the maximum in the emissive power would occur at a wavelength of 0.5 λ1

Oils are partially hydrogenated (not fully) to manufacture Vanaspati, because fully saturated solidified oils (A) Cause cholesterol build up and blood clotting (B) Are prone to rancid oxidation (C) Always contain some amount of nickel (as their complete removal is very difficult) (D) Have affinity to retain harmful sulphur compounds

Description : Oils are partially hydrogenated (not fully) to manufacture Vanaspati, because fully saturated solidified oils (A) Cause cholesterol build up and blood clotting (B) Are prone to rancid oxidation (C ... (as their complete removal is very difficult) (D) Have affinity to retain harmful sulphur compounds

Last Answer : (A) Cause cholesterol build up and blood clotting

Pick out the wrong statement. Iodine value of an oil or fat is (A) The number of grams of iodine taken up by 100 gm of oil or fat (B) A measure of its unsaturation (C) Helpful in findings its adulteration & its suitability for making soap (D) Independent of the type of oil, whether it is drying or non-drying

Description : Pick out the wrong statement. Iodine value of an oil or fat is (A) The number of grams of iodine taken up by 100 gm of oil or fat (B) A measure of its unsaturation (C) Helpful in findings ... & its suitability for making soap (D) Independent of the type of oil, whether it is drying or non-drying

Last Answer : (D) Independent of the type of oil, whether it is drying or non-drying

. Enamels (A) Give good glossy finish (B) Are same as varnish (C) Are prepared from non-drying oil (D) Do not contain pigment

Description : . Enamels (A) Give good glossy finish (B) Are same as varnish (C) Are prepared from non-drying oil (D) Do not contain pigment

Last Answer : (A) Give good glossy finish

What does Ho'omaika'i no ka 'oi mean?

Description : What does Ho'omaika'i no ka 'oi mean?

Last Answer : Need answer

Which country is rich in oi

Description : Which country is rich in oi

Last Answer : Indonesia

Out of the following processes of paper pulp manufacture, the maximum corrosion problem in digestion & handling equipments is encountered in the __________ process. (A) Mechanical (B) Sulphate/Kraft (C) Sulphite (D) Neutral sulphite semi-chemical

Description : Out of the following processes of paper pulp manufacture, the maximum corrosion problem in digestion & handling equipments is encountered in the __________ process. (A) Mechanical (B) Sulphate/Kraft (C) Sulphite (D) Neutral sulphite semi-chemical

Last Answer : (D) Neutral sulphite semi-chemical

Explain drying step in the manufacture of paper.

Description : Explain drying step in the manufacture of paper.

Last Answer : After obtaining paper web, water is removed from it be using air or heat. Earlier method of drying was to hang paper sheets as clothes. Now steam heated can drier are used for drying paper.

Consider the following changes: 1. Curdling of milk 2. Sublimation of camphor 3. Drying of paint 4. Oxidation of SO2 to SO3 The chemical changes are: (a) 1, 2 and 4 only (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only

Description : Consider the following changes: 1. Curdling of milk 2. Sublimation of camphor 3. Drying of paint 4. Oxidation of SO2 to SO3 The chemical changes are: (a) 1, 2 and 4 only (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only

Last Answer : Ans:(b)

Distemper is (A) A paint consisting of powdered chalk, pigments and water (B) A water proofing agent (C) A paint consisting of coloured cement and water (D) A drying agent

Description : Distemper is (A) A paint consisting of powdered chalk, pigments and water (B) A water proofing agent (C) A paint consisting of coloured cement and water (D) A drying agent

Last Answer : Answer: Option A

The main use of butadiene is (A) As a plasticiser for unsaturated polyester (B) In the manufacture of synthetic rubber (C) As an anti-skimming agent in paint (D) None of these

Description : The main use of butadiene is (A) As a plasticiser for unsaturated polyester (B) In the manufacture of synthetic rubber (C) As an anti-skimming agent in paint (D) None of these

Last Answer : (B) In the manufacture of synthetic rubber

The major use of butadiene is (A) As a plasticiser for unsaturated polyester (B) In the manufacture of synthetic rubber (C) As an anti-skinning agent in paint (D) None of these

Description : The major use of butadiene is (A) As a plasticiser for unsaturated polyester (B) In the manufacture of synthetic rubber (C) As an anti-skinning agent in paint (D) None of these

Last Answer : (B) In the manufacture of synthetic rubber

The following type of layout is preferred to manufacture a standard product in large quantity a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Description : The following type of layout is preferred to manufacture a standard product in large quantity a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Last Answer : a.Product layout

Pick up the correct statement from the following: (A) A soil having pH value more than 7 is an acidic soil (B) A soil having pH value less than 7 is an acidic soil (C) A soil having pH value more than 7 is an alkaline soil (D) A soil containing chemicals for the manufacture of Portland cement is preferred

Description : Pick up the correct statement from the following: (A) A soil having pH value more than 7 is an acidic soil (B) A soil having pH value less than 7 is an acidic soil (C) A soil ... more than 7 is an alkaline soil (D) A soil containing chemicals for the manufacture of Portland cement is preferred

Last Answer : Answer: Option B

Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent has the advantages of the (A) Elimination of solvent drying facility (B) Higher nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Description : Solvent deoiling process is used for separating oil and soft wax from hard wax. Methyl iso-butyl ketone and methyl ethyl ketone (MEK) are two commonly used deoiling solvents. Use of former as the deoiling solvent ... nitration temperature (C) Lower solvent dilution ratio (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Can you add something to flat laytex paint to make it semi gloss?

Description : Can you add something to flat laytex paint to make it semi gloss?

Last Answer : i think the proper way to do this is have them mix it in for you at the paint store. other wise it wont be mixed right.

Can I use semi gloss outside paint inside my house?

Description : Can I use semi gloss outside paint inside my house?

Last Answer : It's not designed for the interior,but this is a lot better than using interior paint outside.Exterior paint will stay where you put it.It would usually be far more difficult to clean up any spills or mistakes though.

What's the best paint to use in the kitchen Gloss or semi-gloss?

Description : What's the best paint to use in the kitchen Gloss or semi-gloss?

Last Answer : Semi gloss is considered to be the best of the two because of its ability to be cleaned a lot more easier.

The removal of paint from electrical equipment, such as generators, should be cautiously undertaken because ____________. A. the mechanical shock of paint removal lessens the dielectric strength of the insulation B. the paint dust is composed of abrasive and semi-conducting materials which impair insulation C. paint dust buildup has a tendency to cause corrosion D. phase windings frequently become isolated from each other due to dust interference at the terminals

Description : The removal of paint from electrical equipment, such as generators, should be cautiously undertaken because ____________. A. the mechanical shock of paint removal lessens the dielectric strength ... phase windings frequently become isolated from each other due to dust interference at the terminals

Last Answer : Answer: B

Wood is the main raw material for the manufacture of ------? A. Paint B. Gun powder C. Paper (Answer) D. Ink

Description : Wood is the main raw material for the manufacture of ------? A. Paint B. Gun powder C. Paper (Answer) D. Ink

Last Answer : C. Paper (Answer)

Which of the following is not a manufactured fuel? (A) Furnace oil (B) Bagasse (C) Semi-coke (D) Kerosene

Description : Which of the following is not a manufactured fuel? (A) Furnace oil (B) Bagasse (C) Semi-coke (D) Kerosene

Last Answer : (B) Bagasse

’Drying oil’, oxidized spontaneously by atmospheric oxygen at ordinary temperature and forms a hard water proof material is (A) Coconut oil (B) Peanut oil (C) Rape seed oil (D) Linseed oil

Description : ’Drying oil’, oxidized spontaneously by atmospheric oxygen at ordinary temperature and forms a hard water proof material is (A) Coconut oil (B) Peanut oil (C) Rape seed oil (D) Linseed oil

Last Answer : Answer : D

The commonly used drying oil for oil paints, is (A) Olive oil (B) Linseed oil (C) Kerosene oil (D) Acetate of lead

Description : The commonly used drying oil for oil paints, is (A) Olive oil (B) Linseed oil (C) Kerosene oil (D) Acetate of lead

Last Answer : Answer: Option D

Which one is preferred for aircraft engine? (A) High viscosity index lube oil (B) Low viscosity index lube oil (C) High freezing point aviation fuel (D) None of these

Description : Which one is preferred for aircraft engine? (A) High viscosity index lube oil (B) Low viscosity index lube oil (C) High freezing point aviation fuel (D) None of these

Last Answer : (A) High viscosity index lube oil

Mineral oils (e.g. petroleum oils) are preferred over fatty oils (e.g. mustard oil, ghee, tallow, palm oil, olive oil etc.) as a lubricant due to its (A) Poor oxidation stability and high gum forming tendency (B) Greater tendency of decomposition at elevated temperature (C) Hydrolysis tendency in presence of water (D) All (A), (B) and (C)

Description : Mineral oils (e.g. petroleum oils) are preferred over fatty oils (e.g. mustard oil, ghee, tallow, palm oil, olive oil etc.) as a lubricant due to its (A) Poor oxidation stability and high gum forming ... at elevated temperature (C) Hydrolysis tendency in presence of water (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which is the most ideal feed stock for 'coking' process used for the manufacture of petroleum coke? (A) Naphtha (B) Vacuum residue (C) Light gas oil (D) Diesel

Description : Which is the most ideal feed stock for 'coking' process used for the manufacture of petroleum coke? (A) Naphtha (B) Vacuum residue (C) Light gas oil (D) Diesel

Last Answer : (B) Vacuum residue

Tall oil obtained as a by-product from the black liquor recovery is (A) A black, sticky & viscous liquid (B) Used in the manufacture of greases, emulsions & soaps (C) Composed mainly of rosin & fatty acids (D) All (A), (B) & (C)

Description : Tall oil obtained as a by-product from the black liquor recovery is (A) A black, sticky & viscous liquid (B) Used in the manufacture of greases, emulsions & soaps (C) Composed mainly of rosin & fatty acids (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Nickel is not used as a catalyst in the (A) Fischer-Tropsch process (B) Shift conversion (C) Hydrogenation of oil (D) Ostwald's process of HNO3 manufacture

Description : Nickel is not used as a catalyst in the (A) Fischer-Tropsch process (B) Shift conversion (C) Hydrogenation of oil (D) Ostwald's process of HNO3 manufacture

Last Answer : (D) Ostwald's process of HNO3 manufacture

Zeolite is used in the (A) Water treatment (B) Glass manufacture (C) Hydrogenation of fatty oil as a catalyst (D) Development of exposed photographic plate

Description : Zeolite is used in the (A) Water treatment (B) Glass manufacture (C) Hydrogenation of fatty oil as a catalyst (D) Development of exposed photographic plate

Last Answer : (A) Water treatment

The film co-efficient is decreased due to the presence of non-condensing gases in the vapors. The film co-efficient of superheated vapor as compared to that of saturated vapor is (A) More (B) Less (C) Some (D) Either more or less; depends on the nature of vapor

Description : The film co-efficient is decreased due to the presence of non-condensing gases in the vapors. The film co-efficient of superheated vapor as compared to that of saturated vapor is (A) More (B) Less (C) Some (D) Either more or less; depends on the nature of vapor

Last Answer : (C) Some

A liquid under pressure greater than its vapour pressure for the temperature involved is called a __________ liquid. (A) Sub-cooled (B) Saturated (C) Non-solidifiable (D) None of these

Description : A liquid under pressure greater than its vapour pressure for the temperature involved is called a __________ liquid. (A) Sub-cooled (B) Saturated (C) Non-solidifiable (D) None of these

Last Answer : (A) Sub-cooled

The process of converting liquid oil into solids saturated fats by passing hydrogen gas is

Description : The process of converting liquid oil into solids saturated fats by passing hydrogen gas is

Last Answer : called hydrogenation.

Massecuite is a terminology used in the __________ industry. (A) Paint (B) Oil hydrogenation (C) Soap (D) Sugar

Description : Massecuite is a terminology used in the __________ industry. (A) Paint (B) Oil hydrogenation (C) Soap (D) Sugar

Last Answer : (D) Sugar

Function of thinner in a paint is to (A) Accelerate the oxidation of oil (B) Prevent gelling of the paint (C) Suspend pigments & dissolve film forming materials (D) Form a protective film

Description : Function of thinner in a paint is to (A) Accelerate the oxidation of oil (B) Prevent gelling of the paint (C) Suspend pigments & dissolve film forming materials (D) Form a protective film

Last Answer : (C) Suspend pigments & dissolve film forming materials

Glycerine is a by-product of the __________ industry. (A) Soap (B) Detergent (C) Oil hydrogenation (D) Paint

Description : Glycerine is a by-product of the __________ industry. (A) Soap (B) Detergent (C) Oil hydrogenation (D) Paint

Last Answer : (A) Soap

Polypropylene is preferred to polythene, because the former is (A) Non-inflammable (B) Harder (C) Stronger (D) Both (B) & (C)

Description : Polypropylene is preferred to polythene, because the former is (A) Non-inflammable (B) Harder (C) Stronger (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C

The chamber process is (A) Preferred over contact process for producing 98 to 100% H2SO4 and various oleums (B) Non-catalytic and operates only on pyrites (C) A batch process for directly producing high strength (98 to 100%) H2SO4 (D) None of these

Description : The chamber process is (A) Preferred over contact process for producing 98 to 100% H2SO4 and various oleums (B) Non-catalytic and operates only on pyrites (C) A batch process for directly producing high strength (98 to 100%) H2SO4 (D) None of these

Last Answer : (D) None of these

Plastics are (A) Used in very high temperature applications (B) Non-biodegradable (C) Not suitable for drainage pipe manufacture (D) All (A), (B) & (C)

Description : Plastics are (A) Used in very high temperature applications (B) Non-biodegradable (C) Not suitable for drainage pipe manufacture (D) All (A), (B) & (C)

Last Answer : (B) Non-biodegradable