Why carbon reduction process is not applied for reducing aluminium oxide to aluminium ?

1 Answer

Answer :

Ans. Because aluminium metal itself a very powerful agent and can easily reduce CO formed during the reaction back to carbon. 

Related questions

Description : Which of the following is the primary reason for adding calcium carbonate to the reduction process of iron oxide ores ? The calcium carbonate: w) acts as an oxidizing agent x) removes silicate waste products y) acts as a reducing agent z) removes sulfur waste products

Last Answer : ANSWER: X -- REMOVES SILICATE WASTE PRODUCTS

Description : Statement -1:Aluminothermy is used for extraction of chromium from chromium oxide. Statement-2: Aluminium is reducing agent.

Last Answer : Statement -1:Aluminothermy is used for extraction of chromium from chromium oxide. Statement-2: Aluminium is ... -1 is false but Statement -2 is true

Description : What metal is used as a reducing agent to obtain iron from iron oxide in the Thermite process?

Last Answer : ANSWER: ALUMINUM 

Description : Aluminium is extracted from bauxite (a) By reduction with carbon (b) By reduction with Mg (c) By reduction with CO (d) By electrolysis in molten cryolite

Last Answer : Ans:(d)

Description : Electrolytic reduction cell used for conversion of calcined Al2O3to Al is a carbon lined furnace operating at 800-900 °C. The purpose of electric current supplied to the furnace is to (A) Achieve very high ... by the generation of heat (C) Electrolytically dissociate alumina (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

Description : What is reduction of oxide with carbon at high temperature called? -General Knowledge

Last Answer : The answer is 'Smelting'

Description : What is reduction of oxide with carbon at high temperature called? -General Knowledge

Last Answer : answer:

Description : What is reduction of oxide with carbon at high temperature called? -General Knowledge

Last Answer : answer:

Description : Which of the following faction is of no significance for roasting sulphide ores to the oxide and not subjecting the sulphide ores in carbon reduction

Last Answer : Which of the following faction is of no significance for roasting sulphide ores to the oxide and ... are thermodynamically more stable than `CS_(2)`

Description : Bleaching action of moist sulphur di-oxide is because of its (1) basic property (2) acidic property (3) oxidising property (4) reducing property

Last Answer : oxidising property

Description : Account for the reducing nature of Be even though it has less negative value of reduction potential . 

Last Answer : Like alkali metals, the alkaline earth metals are strong reducing agents. This is indicated by large negative values of their reduction potentials However their reducing power is less than those of their ... size of Be2+ ion and relatively large value of the atomization enthalpy of the metal. 

Description : __________ is the process of coating the surface of steel with aluminium oxide, thereby imparting it increased resistance to corrosion & oxidation upto a temperature of 700°C. (A) Veneering (B) Galvanising (C) Electroplating (D) Calorising

Last Answer : (D) Calorising

Description : Give reason for the following: (a) Aluminium oxide is considered as an amphoteric oxide. (b) Ionic compounds conduct electricity in molten state. -Chemistry

Last Answer : a) Aluminium oxide reacts with both acids as well as bases.b) Ionic compounds in molten state conduct electricity. Explanation: a) An amphoteric oxide as one that shows chemical reactivity with ... ions are present in the liquid state. These free ions enable the solution to conduct electricity.

Description : (3) preventing rapid setting of cement Explanation: Portland cement clinker is a hydraulic material which shall consist of at least two-thirds by mass of calcium silicates, the remainder consisting of ... mixed with water by way of a complex series of chemical reactions still only partly understood.

Last Answer : Milk is a colloidal system in which: (1) Water is dispersed in fat (2) Fat is dispersed in water (3) Fat and water are dispersed in each other (4) Fat is dissolved

Description : Hydrofluoric acid is not kept in glass bottles because it reacts with - (1) visible light (2) silicon dioxide of glass (3) aluminium oxide of glass (4) sodium oxide of glass

Last Answer : (2) silicon dioxide of glass

Description : Philosopher’s wool is chemically - (1) Aluminium oxide (2) Magnesium oxide (3) Zinc oxide (4) Calcium oxide

Last Answer : (3) Zinc oxide Explanation: Philosopher's Wool is chemically zinc oxide.

Description : Which among the following metals provides amphoteric oxide? (1) Sodium (2) Silver (3) Aluminium (4) Calcium

Last Answer : (3) Aluminium Explanation: In chemistry, an amphoteric species is a molecule or ion that can react as an acid as well as a base. Many metals (such as zinc, tin, lead, aluminium, and ... and proteins, which have amine and carboxylic acid groups, and selfionizable compounds such as water and ammonia.

Description : Philosopher’s wool is chemically (1) Aluminium oxide (2) Magnesium oxide (3) Zinc oxide (4) Calcium oxide

Last Answer : Zinc oxide

Description : Which metal does not undergo corrosion due to the formation of oxide layer? (1) Copper (2) Iron (3) Aluminium (4) Zinc

Last Answer : Aluminium

Description : Which among the following metals provides amphoteric oxide ? (1) Sodium (2) Silver (3) Aluminium (4) Calcium

Last Answer : Aluminium

Description : Although thermodynamically feasible, in practice, Magnesium metal is not used for the reduction of Alumina in the metallurgy of aluminium.Why?

Last Answer : Ans. : Below the temperature(1623 K) correspoinding to the point of intersection of Al 2O3 and MgO curves in Ellingham diagram, Magnesium can reduce Alumina because the ΔfG o value of Al2O3 at ... to Al. But Magnesium is much costier metal than Aluminium and hence the process will be uneconomical.

Description : The biochemical treatment applied to sewage effluents is a process of (A) Dehydration (B) Reduction (C) Oxidation (D) Polymerisation

Last Answer : (C) Oxidation

Description : Why is extraction of aluminium not commercially viable by using reducing agents like coke? OR Coke is used in the extraction of iron but not in the extraction of aluminium. Why? OR Aluminium cannot be extracted by heating bauxite and coke. Why?

Last Answer : Oxygen of aluminium oxide cannot be easily taken away by reducing agents like coke.

Description : The heat transfer by radiation from a mild steel surface is to be reduced by reducing the emissivity of the surface. This can be best achieved by (A) Painting the surface black (B) ... white (with aluminium paint) (C) Giving the surface a mirror finish (D) Roughening the surface

Last Answer : (B) Painting the surface white (with aluminium paint)

Description : An important factor in reducing D.C. motor commutator wear is _______________. A. keeping the ambient humidity as low as possible B. ensuring a very low brush current density C. establishing the copper oxide surface film D. all of the above

Last Answer : Answer: C

Description : What occurs to the reducing agent in a reduction reaction?

Last Answer : The reducing agent donates or loses electrons. So it itself becomes oxidized.

Description : Boundary layer separation is caused by the (A) Reduction of pressure to vapour pressure (B) Boundary layer thickness reducing to zero (C) Adverse pressure gradient (D) Reduction of pressure gradient to zero

Last Answer : (D) Reduction of pressure gradient to zero

Description : reduction in thermal resistance during heat transfer does not occur in the (A) Convection heat transfer by stirring the fluid and cleaning the heating surface (B) Conduction heat transfer by ... Radiation heat transfer by increasing the temperature and reducing the emissivity (D) None of these

Last Answer : Option C

Description : Reduction of Fresnel reflection is possible by reducing the step change in the refractive index at the fiber interface. What material reduces the step change in refractive index at a fiber interface?

Last Answer : Index matching gel.

Description : Which of the following statement is incorrect ? a)Oxide of aluminium `(Al_(2)O_(3))` and arsenic `(As_(2)O_(3))` are amphoteric. b)Oxide of chlorine `

Last Answer : Which of the following statement is incorrect ? a)Oxide of aluminium `(Al_(2)O_(3))` and ... sulphides D. Malachite and azurite are ores of copper

Description : how many moles of Aluminium oxide are in 12.75g of aluminium oxideNeed to know?

Last Answer : 3

Description : Both rubies and sapphires contain (a) silicon dioxide (b) lead tetroxide (c) aluminium oxide (d) boron nitride

Last Answer : Ans:(c)

Description : Aluminium surface are often ‘anodized’. This means deposition of a layer of which oxide?

Last Answer : Zinc oxide

Description : Which form of aluminium oxide is hard as diamond?

Last Answer : Corundum

Description : Which is the artificial form of aluminium oxide used for making refractory crucibles?

Last Answer : Alundum

Description : Which is the black impure aluminium oxide mineral found in nature?

Last Answer : Emery

Description : Which metal is protected by the layer of its own oxide? (A) Iron (B) Silver (C) Calcium (D) Aluminium

Last Answer : (D) Aluminium

Description : Ruby is an oxide of-----? A. silver B. gold C. platinum D. aluminium oxide (Answer)

Last Answer : D. aluminium oxide (Answer)

Description : The chemical name of quartz is: A. Silicon Dioxide (Answer) B. Stannous Oxide C. Aluminium Oxide D. None

Last Answer : A. Silicon Dioxide (Answer)

Description : Pick out the wrong statement. (A) Hard glass which is used for making laboratory glass wares is a mixture of sodium borosilicate and aluminium borosilicate (B) Glass is decolorized during its manufacture by ... Na2O . CaO . 6SiO2 (D) Red color is imparted to glass by addition of arsenic oxide

Last Answer : (D) Red color is imparted to glass by addition of arsenic oxide

Description : Which of the following materials does not form adherent oxide film on surface? (A) Copper (B) Nickel (C) Aluminium (D) Gold & silver

Last Answer : (D) Gold & silver

Description : Carbide tipped cutting tools are manufactured by powder metallurgy techniques and have a composition of (A) 90% tungsten carbide and 10% cobalt (B) 70% aluminium oxide & 30% silica (C) 30% nickel, 15% chromium & 55% tungsten (D) 65% tungsten & 35% zirconium

Last Answer : Option A

Description : hich of the following is the most suitable abrasive for grinding high tensile strength materials? (A) Silicon carbide (B) Corundum (C) Aluminium oxide (D) Boron carbide

Last Answer : Option C

Description : The fire clay contains pure (A) Lime (B) Oxide of iron (C) Hydrated aluminium silicate (D) Magnesium

Last Answer : Answer: Option C

Description : The main constituent of fly-ash, is (A) Aluminium oxide (B) Silica (C) Ferrous oxide (D) All of these

Last Answer : Answer: Option D

Description : Name the material which is separated from molten steel during chemical reaction of A.T welding? (i) Aluminium oxide (slag). * (ii) Ferrous Oxide (iii) Aluminium (iv) Ferrous

Last Answer : (i) Aluminium oxide (slag). *

Description : In areas where there is severe corrosion Finishing coat will be a) Two coats of aluminium paint to IS : 2339* b) One coat of zinc chromate priming to IS : 104 e) Two cover coats of red oxide paint to IS :123 f) One coat of zinc chrome - red oxide priming to IS : 2074

Last Answer : a) Two coats of aluminium paint to IS : 2339*

Description : In areas where there is no severe corrosion Finishing coat will be a) Two coats of aluminium paint to IS : 2339 b) One coat of zinc chromate priming to IS : 104 c) Two cover coats of red oxide paint to IS :123* d) One coat of zinc chrome - red oxide priming to IS : 2074

Last Answer : c) Two cover coats of red oxide paint to IS :123*

Description : Write down industrial importance of following ceramics. i) Silicon carbide ii) Aluminium oxide.

Last Answer : Industrial importance of: i) Silicon carbide: 1. It is used in car brakes and clutches. 2. Ceramic plates in bulletproof vests 3. Bearings 4. Semiconductors wafer processing equipment 5. ... . Cutting tools 3. Artificial bones and teeth 4. Engine and turbine parts 5. Thermometry sensors

Description : State the functions of following essential parts of electrolytic capacitor. 1. Aluminium foil 2. Oxide film 3. Spacers 4. Aluminium container

Last Answer : 1. Aluminium Foil – It serves as a positive electrode called anode  2. Oxide film – It acts as a dielectric medium.  3. Spacer- It is used to provide separation and hold the electrolyte.  4. Aluminium container- It serves as a negative electrode called cathode.